一种新型微结构光纤的设计与数值研究

提出了一种新型双包层结构的微结构光纤(MOF),利用有限元法对其模场面积、损耗及色散系数随波长的变化规律进行了数值模拟与分析,并在相同条件下与传统的双包层MOF作了比较。结果表明,该种光纤不但结构新颖,而且较传统光纤有更优异的色散性能。通过合理优化,设计了几种在500nm波长范围内保持低平色散和较大模场面积的新型双包层MOF。这种光纤结构的提出对以后的理论研究和工艺制备具有一定的参考意义。     

Design of Topas microstructured fiber with ultra-flattened chromatic dispersion and high birefringence

A microstructured polymer optical fiber (mPOF) with both ultra-flattened near-zero chromatic dispersion and high birefringence based on Topas cyclic olefin copolymer is designed. Three rings of uniform elliptical air holes are arranged in triangular lattice in the cladding and an extra small defected hole is introduced in the fiber core. Guided modes, dispersion, birefringence and mode confinement properties of the designed mPOF are investigated by using the full-vector finite element method. Dispersion values between ± 0.5 ps/km/nm over the wavelength 1.1-1.7 μm and high birefringence of the order of 10⁻³ are obtained for the optimized fiber structure. Low confinement losses and small effective mode area are obtained at the same time. The relatively simple architecture of the proposed Topas mPOF can be fabricated by our extrusion-stretching techniques.     

Ultra-wideband single-polarization single-mode, high nonlinearity photonic crystal fiber

We report a novel design of photonic crystal fiber (PCF) with a rectangular array of four closely-spaced, highly elliptical air holes in the core region and a circular-air-hole cladding. The proposed PCF is able to support ultra-wideband single-polarization single-mode (SPSM) transmission from the visible band to the near infrared band. With the aid of the inner cladding formed by the central air holes, one polarization of the fundamental mode can be cut off at very short wavelengths and ultra-wideband SPSM propagation can be achieved. The inner cladding also suppresses the higher order modes and allows large air filling fraction in the outer cladding while the proposed fiber remains SPSM, which significantly reduces the mode effective area and the confinement loss. Our simulation results indicate that the proposed PCF has a 1540 nm SMSP range with <0.25 dB/km confinement loss and an effective area of 2.2 μm². Moreover, the group velocity dispersion (GVD) of the proposed PCF can also be tuned to be flat and near zero at the near infrared band (∼800 nm) by optimizing the outer cladding structure, potentially enabling many nonlinear applications.     

一种新的低非线性宽带色散补偿微结构光纤的设计

采用矢量光束传输法对空气孔包层呈正六边形分布的微结构光纤的色散和非线性特性进行了数值模拟。通过分别调节内三层空气孔的直径和包层空气孔节距,设计了一种低非线性宽带色散补偿微结构光纤。该光纤在波长1.55 μm处具有－3 235.8 ps/nm/km的大负色散,可在以1.55 μm为中心的100 nm宽带波长范围对相当于自身长度190倍的普通单模传输光纤进行宽带色散补偿(色散补偿率偏移在0.5%以内),同时该光纤可在此宽带波长范围内保持非线性系数低于5 W^-1·km^-1。     

Design of zero dispersive double clad fiber for high efficiency operation of two color light

A double clad solid silica fiber is newly designed for applications which need the high efficiency operation of two colors of light. Ultrashort pulses with a central wavelength of 800?nm are delivered by the core of the double clad fiber which can realize the transmission of the optical pulses with a net chromatic dispersion of zero. This is achieved by integrating the double clad fiber with a pair of long period gratings, which allows optical pulses to propagate in a higher order mode (LP₀₂) in the middle of the fiber as well as in a fundamental mode (LP₀₁) at the beginning and end of the fiber. The index profile of the double clad fiber is engineered so that the higher order mode has high anomalous dispersion that can be used to compensate for normal dispersion of the fundamental mode. By controlling the lengths of the fiber where pulses are in a fundamental and in a higher order modes, the fiber with total zero dispersion can be realized. The double clad fiber can collect 100?% of visible light within the numerical aperture of 0.21 with a loss of the optical pulses less than 1?%. The design of this fiber is essential for applications including fiber-optic nonlinear imaging for compactness, robustness, and low optical power loss in dispersion compensation.     

Survey of systems experiments demonstrating dispersion compensation technologies

Chromatic dispersion compensation is an integral part of WDM transmission system design. Compensator properties such as insertion loss, dispersion slope and effective mode area have a large impact on WDM system performance due to nonlinear optical propagation effects. Dispersion compensator imperfections, such as multi-path interference, group delay ripple, insertion loss ripple and limited per-channel compensation bandwidth, place additional limitations on the achievable transmission distance and capacity. In this paper, a survey of key WDM transmission system experiments is undertaken to 1) review the development of chromatic dispersion compensation technologies, 2) discuss the device characteristics that most impact system design for each technology, and 3) hopefully enable the reader to better evaluate compensator technologies for specific applications.     

基于双芯光子晶体光纤的低非线性宽带色散补偿光纤的设计

采用矢量光束传输法数值模拟了基于模式耦合的双芯光子晶体光纤的色散和非线性与其结构的关系。结果表明:通过在包层中移除一层空气孔以形成外纤芯并调整内外纤芯之间的距离及包层空气孔的占空比,内外纤芯间的模式耦合可以在宽带范围内发生,导致产生大负色散。同时,由于光场分布在两个纤芯内,增大了模场面积,产生低非线性,可以实现低非线性宽带色散补偿。     

一种新型多芯-双模-大模场面积光纤的设计和分析

提出了一种新型双空气孔多芯-双模-大模场面积光纤结构, 计算了其模场分布、基模有效面积及弯曲损耗特性, 分析了各结构参量对其有效折射率及有效面积的影响. 这种结构在增大有效面积的同时使得二阶模的TE₀₁, TM₀₁模截止, 实现双模传输, 基模有效面积约为1044 μm².调整其结构参量, 甚至可以达到单模传输.这种结构制作简单、设计灵活, 可用于高速大容量无源光纤及有源器件中.合理设计各结构参量, 可以使有效面积达到3512 μm²甚至更高, 从而满足光通信领域中大容量、高功率传输等实际应用的需求. 关键词： 多芯光纤 双模 大模场面积 弯曲损耗     

基于光纤锥和纤芯失配的Mach-Zehnder干涉湿度传感器

介绍了一种简单且灵敏度较高的Mach-Zehnder干涉湿度传感器.将单模光纤和多模光纤渐变熔接光纤锥,色散补偿光纤被熔接在两个多模渐变光纤之间,形成了单模光纤-光纤锥-多模渐变光纤-色散补偿光纤-多模渐变光纤-光纤锥-单模光纤结构的传感器.光纤锥起到了增加包层模能量的作用,两个多模渐变光纤节点作为光耦合器,从而形成光纤Mach-Zehnder干涉仪.外界环境湿度的变化,将使得传感器透射谱能量发生变化,通过测量干涉谱波峰峰值能量实现对湿度的测量.实验结果表明干涉谱波峰峰值能量与环境湿度之间存在良好的线性关系.当环境湿度在35%RH—85%RH范围内变化,一段由20 mm色散补偿光纤组成的传感器,其灵敏度为-0.0668 dB/%RH,相关度为0.995.该传感器结构紧凑、尺寸小、制造工艺简单,这使其可以被广泛用于湿度测量.     

基于高非线性微结构光纤的全光再生研究

提出了利用高非线性微结构光纤自相位调制效应进行全光再生的研究方案。分析了一组微结构光纤的色散和非线性特性。结果显示光纤的非线性系数与光纤结构有密切关系。通过减小有效模面积,可以提高光纤的非线性系数。采用一种高空气填充比的高非线性微结构光纤作为非线性介质,进行了基于自相位调制效应的全光再生研究。结果表明,由于微结构光纤的高非线性,采用较短的光纤长度就可以实现较好的再生效果。同时,输入微结构光纤的峰值功率、滤波器的参量选择对光再生的效果有重要的影响,它们必需满足一定要求,才能实现光再生。此外,对再生器的传输特性进行了研究。通过调整输入峰值功率和滤波器的参量,可以对不同宽度的光脉冲信号进行全光再生。     

七芯及十九芯大模场少模光纤的特性研究和比对分析

提出了一种新型的多芯大模场少模光纤.包含缺失空气孔的特殊结构使其具有独特的少模特性, 仅传输HE₁₁模和HE₂₁模.分析表明七芯大模场少模光纤能维持稳定的双模式运转, 且基模有效面积可达866.54 μm². 系统研究了光纤结构参数影响模式特性和基模有效面积的规律, 并分析了纤芯数目增加带来的性能相似性和差异性–-进阶的十九芯大模场少模光纤在继承少模特性的同时, 模场面积大大增加, 其基模有效面积可高达3617.55 μm². 对比已报道的少模光纤, 多芯大模场少模光纤获得了更大的有效面积, 并具有良好的弯曲特性, 有望被用于更高功率的光纤放大器、光纤激光器以及高速大容量光纤传输系统中. 关键词： 少模光纤 多芯 大模场面积 弯曲损耗     

环形光子晶体光纤中涡旋光的传输特性研究

由于涡旋光具有轨道角动量,将它应用于光纤通信领域可以有效提高信息传输速率.设计了一种环形光子晶体光纤,利用COMSOL Multiphysics软件对其涡旋光TE01,HE±21和TM01模式特性进行模拟计算,它们之间有效折射率差分别为4.59×10~(-4)和3.62×10~(-4);其中,TE01模式的涡旋光在入射光波长范围为1650—1950 nm时,色散值在44.18—45.83 ps·nm~(-1)·km~(-1)之间平坦;入射光波长在1550 nm时,TE01模式的涡旋光的非线性系数为1.37 W~(-1)·km~(-1).该结构的光子晶体光纤的涡旋光具有损耗小、色散平坦等特性,对光纤中传输涡旋光、将涡旋光应用于超连续谱等方面的研究具有重要意义.     

Highly dispersive large mode area photonic bandgap fiber

An all-silica photonic bandgap fiber composed of a low-index core surrounded by alternating high- and low-index rings allows us to achieve a large mode area (500 microm(2)) and large chromatic dispersion. Sharp resonances from the even Bragg mode to odd ring modes theoretically lead to 20,000 ps/(nm km) chromatic dispersion when large bends are applied. By nature, sharp resonances are sensitive to inhomogeneities along the fiber length. Under experimental conditions, the resonances are broadened and the dispersion coefficient is decreased to 1000 ps/(nm km). However, to the best of our knowledge, this is the largest dispersion coefficient reported using a large mode area fiber.     

高速光纤通信系统中抑制偏振模色散的新机制

重点研究了偏振模色散、群速度色散、自相位调制三者之间在高速光纤通信系统中的相互作用，从时域角度分析脉冲的演变，从频域角度分析频谱的变化，提出一定条件下，啁啾、色散、自相位调制可以部分补偿偏振模色散的思想。通过对40Gbit／s系统进行偏振模色散、群速度色散和自相位调制共同作用的仿真，从统计意义上验证了它们之间的相互影响，并找到最佳传输方案，对系统设计提供了参考。     

Research on WDM optical fiber transmission system based on fiber Raman amplifier

After wavelength division multiplexing (WDM) optical fiber transmission system based on fiber Raman amplifier (FRA) is investigated in detail, the influence of the collocation of dispersion compensation fiber (DCF), the dispersion coefficient, dispersion slope (DS), effective core area, nonlinear index, length of FRA, launch power and the bandwidth of Bessel filter on bit error rate (BER) is deduced. The influence of Rayleigh backscattering noise on optical signal noise ratio (OSNR) is also investigated, which affects the performance of long haul transmission badly. The result indicates that the broadband long haul transmission can be realized through the reasonable design of the fiber. The result is useful to the optimal design of the WDM optical fiber transmission system based on FRA.     

实用化少模光纤的研究

针对大容量光纤通信系统,设计了一种实用化的椭圆纯硅芯少模光纤,给出了光纤的设计原理与参考标准,运用全矢量有限元法结合完美匹配层边界条件分析了光纤的传输特性.在1.4~1.65μm波长处,光纤处于稳定的HE_(11)和HE_(21)双模运转,模式有效折射率差大于1.8×10~(-3),避免了模间耦合和串扰;在工作波长1.55μm处,HE_(11)和HE_(21)模的色散系数分别为19.61和4.41ps/(nm·km),色散斜率分别为0.048和0.002ps/(nm~2·km),模场面积分别为97.17和143.96μm2,模式的衰减系数均小于0.21dB/km.该光纤的传输特性基本符合G.652和G.655光纤标准,可利用现有成熟的"预制棒拉丝工艺"制备,同时与波分复用技术相结合可以成倍提升光网络的传输容量,对于下一代通信网络带宽的提升具有重要意义.     

Large-dispersion-tolerance optical signal transmission system based on temporal imaging

A novel optical signal transmission system, which is highly tolerant of dispersion of the transmission fiber, is proposed. The system employs a dispersion fiber and a phase modulator in both the transmitter and the receiver. We analyzed the characteristics of the system, using the temporal imaging concept, and found that the output optical pulse is insensitive to dispersion of the transmission fiber if the parameters of the system are set to hold a specific condition. We report simulation results that confirm these characteristics of the proposed system.     

Simulation and experimental research on polymer fiber mode selection polished coupler

Multimode dispersion is the main obstacle for high bandwidth in multimode optical fiber （MMF） communication system. Mode selection is an effective method to oppress multimode dispersion. We propose and investigate a kind of polymer optical fiber polished coupler. Beam propagation method （BPM） is employed to calculate the coupling coefficient of transmission modes in MMF coupler, and an output pattern from coupling branch is obtained. Analysis and experiment show that this coupler can select certain modes by changing polished depth, contact area, and intersection angle of two branches, which means that the device can be employed both as a mode selector and a sensor. In addition, simulation shows that five times bandwidth enhancement may be realized by selecting modes with the polymer fiber polished coupler.     

40 Gb/s信号的全光3R再生

研制出以注入锁模光纤激光器进行时钟恢复、电吸收调制器（EAM）作光判决门进行信号再整形的新型全光3R再生器,成功地运行于40Gb／s。理论和实验证明锁模环形激光器腔内放置的可调谐光滤波器的透射谱形状对时钟的脉宽有显著影响,超高斯透射谱的光滤波器利于获得窄时钟光脉冲,腔内放置这样的滤波器使恢复的时钟光脉冲谱宽达0．44nm、脉宽6ps、时间抖动小于1ps。最佳选择用作光判决的开关门的参量,改善了开关门的传输函数,使其接近阶跃函数,并使得开关窗宽度达到最佳。对于被剩余色散恶化的40Gb／s归零码信号进行了3R再牛,再生后达到了无误码。     

光纤偏振效应导致脉冲展宽的解析模型

在10Gb／s,尤其是40Gb／s以上高速光纤通信系统中,光纤的偏振特性已成为限制系统传输距离的主要因素之一。光纤的偏振效应主要包括偏振模色散和偏振依赖损耗。而脉冲均方根展宽是判断信号传输性能的一个主要物理量。本文讨论了光纤线路偏振模色散与偏振相关损耗的相互作用及对信号脉宽的影响。给出了线路偏振模色散矢量和偏振相关损耗矢量之间的关系式,并基于严格的数学方法,导出了在光纤偏振模色散和偏振相关损耗共同作用下的信号均方根脉宽变化的解析形式,同时考虑了光纤色散,啁啾等。该模型可用于分析高阶偏振模色散和偏振相关损耗,任意线性光纤通信系统脉冲展宽分析。