Analysis of steroids by nonaqueous capillary electrophoresis

A simple method for the separation and determination of steroids (estradiol valerate, triamcinolone, levonorgestrel and ethinylestradiol) in single and compound tablets by nonaqueous capillary electrophoresis with ultraviolet (UV) spectrophotometric detection has been developed for the first time. After optimizing the electrophoretic parameters, including the nature of electrolytes and composition of organic solvent, the running buffers of methanol-acetonitrile (95: 5, v/v) containing 20 mM sodium acetate (pH 6.5) and methanol-acetonitrile (90: 10, v/v) containing 25 mM sodium acetate (pH 7.0) were found to be most suitable for determining estradiol valerate and triamcinolone, respectively. Reliable separation and simultaneous determination of levonorgestrel and ethinylestradiol were achieved in methanol containing 20 mM of ammonium acetate and 10 mM of sodium dodecyl sulfate (SDS). Tamoxifen was used as internal standard. Performance of the method, including migration time and peak area reproducibility, linearity, sensitivity and accuracy, were also evaluated. The limits of detection (S/N = 3) for four analytes were in the range of 9.8–19.5 μ g/mL. The relative standard deviations (RSD) of the migration times and peak areas of the analytes were in the range of 0.14–1.0% and 0.7–2.7% (intraday), 0.5–2.8% and 1.5–4.2% (interday), respectively. Within the tested concentration range, linear relationships between peak area ratios and concentrations of the analytes were obtained (correlation coefficients: 0.9987–0.9996). The method has been successfully applied to the determination of ingredients with recoveries over the range of 96.6–100.6%. The text was submitted by the authors in English.     

A three-dimensionally adjustable amperometric detector for microchip electrophoretic measurement of nitroaromatic pollutants

A microchip capillary electrophoresis (CE)–amperometric detection (AD) system has been fabricated by integrating a two-dimensionally adjustable CE microchip and an amperometric detection cell containing a one-dimensionally adjustable disc detection electrode in a Plexiglas holder. It facilitates the precise three-dimensional alignment between the channel outlet and the detection electrode without a complicated three-dimensional manipulator. The performance of this unique system was demonstrated by separating four nitroaromatic pollutants (nitrobenzene, 2,4-dinitrotoluene, 2,4,6-trinitrotoluene, and p-nitrobenzene). Factors influencing their separation and detection processes were examined and optimised. The four analytes have been well-separated within 120 s in a 75 cm long separation channel at a separation voltage of +2000 V using an electrophoretic separation medium containing 15 mM borax and 15 mM sodium dodecyl sulfate (pH 9.2). Highly linear response is obtained for the four analytes over the range of 0–5 ppm with the detection limits ranging from 12 to 52 ppb. The present system demonstrated long-term stability and reproducibility with relative standard deviations of less than 5% for the peak current (n = 9). The new approach for the microchannel–electrode alignment should find a wide range of applications in other microfluidic analysis systems.     

Analysis of amphetamine, methamphetamine and methylenedioxy-methamphetamine by micellar capillary electrophoresis using cation-selective exhaustive injection

Cation-selective exhaustive injection (CSEI) is used as an on-line concentration method for the high-sensitivity analysis of illicit amphetamines using CE. Optimum conditions for the determination of amphetamine, methamphetamine and methylenedioxy-methamphetamine were investigated. Sodium dodecyl sulfate (25 mM) in 100 mM phosphate buffer (pH 2.9) with 20% methanol as organic additive was used as the background electrolyte for CE separation. The LOD, based on an S/N of 3:1, was about 0.01 microg/mL using normal capillary micellar electrokinetic chromatography, while by using CSEI in combination with micellar sweeping the sensitivity increased up to 1000-fold with the LOD lower than 50 pg/mL. The reproducibility of CSEI combined with micellar sweeping for analyzing amphetamines was satisfactory (relative standard deviation around 10% by using area ratios against an internal standard). This method is highly sensitive and can be used to analyze trace amount amphetamines in human hair.     

Determination of 5-methyl-cytosine and cytosine in tumor DNA of cancer patients

The determination of the relative methylation in DNA tumor samples, in order to evaluate the activity of some anti-cancer drugs, has become a very important issue in the clinical field. Capillary electrophoresis (CE) applications in this area have been done previously but no good separation for model samples or tumor samples has been reported. In this work, the CE conditions have been optimized in order to obtain baseline separation and efficient peaks for cytosine and 5-methylcytosine in both, standard mixtures and actual tumor samples; other bases (adenine, uracil, guanine, and thymine) have also been integrated in the optimization studies. More efficient peaks and shorter analysis time compared with the already reported conditions have been obtained employing a fused-silica capillary (75 microm inner diameter) of 44.5 cm effective length, 20 mM carbonate buffer (pH 9.6) plus 80 mM sodium dodecyl sulfate, a separation voltage of 20 kV, and detection at 223 nm.     

Determination of Flavonoids from Paulownia tomentosa (Thunb) Steud by Micellar Electrokinetic Capillary Electrophoresis

A micellar electrokinetic capillary electrophoresis (MEKC) method was developed for the determination of three flavonoids: diplacone (DI), mimulone (MI) and apigenin (AP) in the flowers of Paulownia tomentosa (Thunb) Steud. A buffer solution (pH 10.00) of 20 mM sodium borate, 10 mM sodium dodecyl sulfate (SDS) and 5% methanol was found to be the most suitable electrolyte for this separation. Regression equations revealed linear relationships (correlation coefficients: 0.9997 and 0.9998) between the peak area of each compound (DI, MI and AP) and its concentration. The relative standard deviations of migration times and peak areas were < 1.93 and 6.84%, respectively. The effects of pH, surfactant (SDS) concentration and organic modifier (methanol) on migration were also studied. The contents of three flavonoids in the extracts from the flowers of P. tomentosa applying different solvents were successfully determined within 12 min.     

Separation of iota-, kappa and lambda-carrageenans by capillary electrophoresis

The present study reports a novel method for the separation of the high-molecular-weight anionic polysaccharides, iota, kappa, and lambda carrageenans, in capillary electrophoresis (CE). Carrageenan samples are first derivatised with 9-aminopyrene-1,4,6-trisulfonic acid (APTS), separated in an ammonium acetate background electrolyte (BGE) and detected with laser-induced fluorescence (LIF). The effects of changes of instrumental parameters (temperature, injection mode, field strength) and the composition of the BGE (concentration and pH) are reported, and are explained in terms of the physical chemistry of the BGE and the biopolymers. Optimal separation conditions for kappa, iota, and lambda carrageenans, including an APTS internal standard, were found in a polyvinyl alcohol coated capillary with an ammonium acetate BGE of low concentration (25 mM) and moderate pH (8.0). This BGE gave the best reproducibility in tests on iota/kappa mixtures, with relative standard deviations (RSDs) in migration times and normalised peak areas (relative to the APTS internal standard) of less than 0.1% and 1%, respectively. Using this BGE at 50 degrees C and a voltage of 30 kV, all three carrageenan subtypes were separated in a run time of 3 min.     

A liquid-junction/low-flow interface for sensitivity improvement in micelle electrokinetic chromatography–electrospray ionization-mass spectrometry

A liquid-junction/low-flow interface was used to alleviate ion suppression caused by nonvolatile surfactants in micelle electrokinetic chromatography–electrospray ionization-mass spectrometry. Ion suppression due to micelles was alleviated by adjusting operating conditions to keep micelles from entering the ESI source. Two operation modes were investigated. In the first configuration, micelles migrated in the direction opposite to the analytes of interest. A second mode of operation was configured to retain micelles in the liquid-junction between the CE separation column and the ESI interface. In either case, the micelles did not enter the ESI source. To reduce the adverse effect caused by sodium ions, sodium dodecyl sulfate was replaced with the ammonium dodecyl sulfate. Importantly, despite actions taken to alleviate ion suppression, the separation efficiency was preserved as a result of the liquid-junction/low-flow interface. The utility of the described approach for micelle electrokinetic chromatography–electrospray ionization-mass spectrometry was demonstrated by the analysis of sulfonamides at pH 5.5 and pH 7.8, each selected to highlight the two mode of operation.     

Rapid determination of surfactant critical micelle concentrations using pressure-driven flow with capillary electrophoresis instrumentation

This work demonstrates a novel, convenient utilization of capillary electrophoresis (CE) instrumentation for the determination of critical micelle concentrations (CMCs). Solution viscosity differences across a range of surfactant concentrations were monitored by hydrodynamically forcing an analyte towards the detector. Upon reaching the surfactant's CMC value, migration times were observed to change drastically. CMC values for four commonly employed anionic surfactants were determined—sodium dodecyl sulfate: 8.1 mM; sodium caprylate: 300 mM; sodium decanoate: 86 mM; sodium laurate: 30 mM; and found to be in excellent agreement with values previously reported in the literature. The technique was then applied to the less well-characterized nonionic surfactants poly(oxyethylene) 8 myristyl ether (CMC ∼ 9 M), poly(oxyethylene) 8 decyl ether (CMC ∼ 0.95 mM) and poly(oxyethylene) 4 lauryl ether.     

Separation of linoleic acid oxidation products by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis

In this work the suitability of micellar electrokinetic capillary chromatography (MEKC) and nonaqueous capillary electrophoresis (CE) to the analysis of the primary oxidation products of linoleic acid was studied with uncoated fused-silica capillaries. The primary autoxidation products of linoleic acid are the four hydroperoxide isomers 13-hydroperoxy-cis-9, trans-11-octadecadienoic acid, 13-hydroperoxy-trans-9, trans-11-octadecadienoic acid, 9-hydroperoxy-trans-10,cis-12-octadecadienoic acid, 9-hydroperoxy-trans-10, trans-12-octadecadienoic acid. Addition of a surfactant such as sodium dodecyl sulfate (SDS) or sodium cholate (SC) into the running buffer (20-30 mM 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS) or ammonium acetate, pH 9.5-11) was required to enhance the water solubility of the sample and selectivity of the separation. MEKC proved to be a promising new technique for the separation of the primary oxidation products of lipids giving results comparable to high performance liquid chromatography (HPLC). Partial separation of hydroperoxide isomers was also achieved using nonaqueous CE with methanol-acetonitrile-sodium cholate as running buffer.     

Gold nanomaterials based pseudostationary phases in capillary electrophoresis: A brand‐new attempt at chondroitin sulfate isomers separation

In this work, a CE method with bare gold nanorods (GNRs) based pseudostationary phase was developed and applied for the separation of chondroitin sulfate (CS) isomers, CS, and dermatan sulfate (DS). The separation efficiency was investigated by varying the experimental parameters such as concentration and pH of the BGE, separation voltage, internal diameter of capillary, different size, and morphology of gold nanomaterials. Results showed that different size and morphology of gold nanomaterials had different effects on the separation of CS and DS. The best separation of CS and DS was achieved in the BGE composed of aqueous 150 mmol/L (mM) ethylenediamine + 20 mM sodium dihydrogen phosphate + 30% v/v GNRs, pH 4.5, at the separation voltage of ?10 kV. Capillary was 59.2 cm in length (effective length 49 cm), 50 μm id capillary thermostated at 25°C. CE with bare GNRs used as pseudostationary phase was shown to be a suitable technique for the separation of CS and DS mixtures with wider peaks. RSD of migration time and peak area of CS and DS were 0.13, 0.14 and 0.86, 1.07%, respectively.     

Improved workup for glycosaminoglycan disaccharide analysis using CE with LIF detection

This work describes improved workup and instrumental conditions to enable robust, sensitive glycosaminoglycan (GAG) disaccharide analysis from complex biological samples. In the process of applying CE with LIF to GAG disaccharide analysis in biological samples, we have made improvements to existing methods. These include (i) optimization of reductive amination conditions, (ii) improvement in sensitivity through the use of a cellulose cleanup procedure for the derivatization, and (iii) optimization of separation conditions for robustness and reproducibility. The improved method enables analysis of disaccharide quantities as low as 1 pmol prior to derivatization. Biological GAG samples were exhaustively digested using lyase enzymes, the disaccharide products and standards were derivatized with the fluorophore 2‐aminoacridone and subjected to reversed polarity CE‐LIF detection. These conditions resolved all known chondroitin sulfate (CS) disaccharides or 11 of 12 standard heparin/heparan sulfate disaccharides, using 50 mM phosphate buffer, pH 3.5, and reversed polarity at 30 kV with 0.3 psi pressure. Relative standard deviation in migration times of CS ranged from 0.1 to 2.0% over 60 days, and the relative standard deviations of peak areas were less than 3.2%, suggesting that the method is reproducible and precise. The CS disaccharide compositions are similar to those obtained by our group using tandem MS. The reversed polarity CE‐LIF disaccharide analysis protocol yields baseline resolution and quantification of heparin/heparan sulfate and CS/dermatan sulfate disaccharides from both standard preparations and biologically relevant proteoglycan samples. The improved CE‐LIF method enables disaccharide quantification of biologically relevant proteoglycans from small samples of intact tissue.     

Capacitively coupled contactless conductivity detection as an alternative detection mode in CE for the analysis of kanamycin sulphate and its related substances

A method was developed to determine simultaneously kanamycin, its related substances and sulphate in kanamycin sulphate using capacitively coupled contactless conductivity detection. Kanamycin is an aminoglycoside antibiotic that lacks a strong UV-absorbing chromophore. Due to its physicochemical properties, CE in combination with capacitively coupled contactless conductivity detection was chosen. The separation method uses a BGE composed of 40 mM 2-(N-morpholino)ethanesulphonic acid monohydrate and 40 mM L-histidine, pH 6.35. A 0.6 mM N-cetyltrimethyl ammonium bromide (CTAB) solution was added as electroosmotic flow modifier in a concentration below the critical micellar concentration (CMC). Ammonium acetate 50 mg/L was used as internal standard. In total, 30 kV was applied in reverse polarity on a fused-silica capillary (65/41 cm; 75 μm id). The optimized separation was obtained in less than 6 min with good linearity (R(2)=0.9999) for kanamycin. It shows a good precision expressed as RSD on the relative peak areas equal to 0.3 and 1.1% for intra-day and inter-day precision, respectively. The LOD and LOQ are 0.7 and 2.3 mg/L, respectively. Similarly, for sulphate, a good linearity (R(2)=0.9996) and precision (RSD 0.4 and 0.6% for intra-day and inter-day, respectively) were obtained.     

Determination of Dexamethasone in Cosmetics by MEKC

A rapid and reliable method based on micellar electrokinetic capillary chromatography has been developed for the determination of dexamethasone in cosmetics. Effects of buffer composition, concentration and pH, the detection wavelength, separation voltage, and injection time were systematically investigated. The optimum conditions were: 30 mM borax buffer containing 20 mM sodium dodecyl sulfate at pH 9.0, detection at 254 nm, injection time 10 s at a height of 10 cm, and a separation voltage of 15 kV. Under these conditions, the analysis of dexamethasone in cosmetics was carried out within 6 min. The method was validated for stability, precision, linearity and accuracy. Excellent linearity was obtained in the range of 50–1,000 μg mL⁻¹, and acceptable precision, in intra-day and inter-day analysis, was also obtained with relative standard deviation in the range of 0.19–0.86 and 2.50–4.90% for migration time and peak area ratio, respectively. The method was used to analyse eight cosmetic samples purchased locally.     

Separation of polycyclic aromatic hydrocarbons by micellar electrokinetic chromatography with aqueous short-chain alcohol solvent

Micellar electrokinetic capillary chromatography (MEKC) with aqueous organic solvent has been developed to separate polycyclic aromatic hydrocarbons (PAHs). Methanol, ethanol or propanol as an organic modifier was added to sodium dodecyl sulfate (SDS) micellar solution in order to increase the solubility of very hydrophobic solutes in mobile phase. Both methanol and ethanol can be used as co-solvents for the separation of PAHs. Use of ethanol resulted in a shorter analysis time than use of methanol. The separations of some PAHs were unsatisfactory using propanol although the analysis time was much shorter than with ethanol. The influence of ethanol content, SDS concentration and temperature on the separations was studied. Benzene and nine polycyclic aromatic hydrocarbons were successfully separated using 50 mM SDS-20 mM phosphate-5 mM borate, containing 40% (v/v) ethanol at 35 degrees C. The relative standard deviation (R.S.D.) of t(R) ranged from 0.5 to 1.5% for six repeat injections.     

Analysis of phenoxymethylpenicillin potassium by capillary electrophoresis

The application of capillary electrophoresis for separation of penicillin V and its impurities was investigated. The phosphate-borate buffer supplemented with sodium dodecyl sulfate (SDS) 20.0 g/L (69 mM) and pentanesulfonic acid sodium salt (PS) 2.2 g/L (12.5 mM) adjusted to pH 6.3, and current voltage 15 kV seem to provide optimal conditions for this aim. The resolution between penicillin V and each impurity was very good. The statistical analysis of phenoxymethylpenicillin V assay showed no significant differences between the results obtained by CE and HPLC methods.     

Dodecyl thioglycopyranoside sulfates: novel sugar-based surfactants for enantiomeric separations by micellar electrokinetic capillary chromatography

Four novel chiral anionic surfactants having carbohydrate hydrophilic heads, sodium n-dodecyl 1-thio-beta-D-glucopyranoside 6-hydrogen sulfate (6-betaGlcD), sodium n-dodecyl 1-thio-beta-L-glucopyranoside 6-hydrogen sulfate (6-betaGlcL), sodium n-dodecyl 1-thio-beta-L-fucopyranoside 3-hydrogen sulfate (3-betaFucL), and sodium n-dodecyl 1-thio-alpha-L-rhamnopyranoside 3-hydrogen sulfate (3-alphaRhaL), were synthesized by selective sulfation of the corresponding thioglycosides. Their CMC determined by fluorescence using pyrene as a probe in water was 1.3-2.7 mM. These surfactants found to be useful as chiral selectors for enantiomeric separation by MEKC. The enantiomeric separation was optimized with respect to pH, buffer concentration, and surfactant concentration. Under the optimized conditions (50 mM phosphate buffer at pH 6.5, 30 mM surfactant, 20 kV), the enantiomeric separations of five dansylated amino acids (Dns-AAs) were achieved within approximately 20 min with the migration order of Val相似文献   

乳状液膜体系分离锌(Ⅱ)

研究了span80(失水山梨醇单油酸脂)-SDS(十二烷基磺酸钠)与span80-AOT(2-乙基己基琥珀酸酯磺酸钠)两种乳状液膜体系对锌(Ⅱ)分离效果的比较。分别讨论了液膜体系中表面活性剂和内相试剂浓度、乳水比和油内比对锌(Ⅱ)去除率的影响。试验了锌(Ⅱ)与共存组分的分离。     

Analysis of eleven iridoid glycosides by micellar electrokinetic capillary chromatography (MECC) and screening of plant samples by partial filling (MECC)-electrospray ionisation mass spectrometry

Of ammonium, lithium and sodium salts of dodecyl sulfate studied as surfactants in the separation of iridoid glycosides by micellar electrokinetic capillary chromatography (MECC), the last one gave the best results. Eleven neutral iridoid glycosides were separated by MECC with sodium dodecyl sulfate as surfactant, and the water–micelle partition coefficients of the compounds were calculated. The separation system was coupled via a coaxial sheath flow electrospray interface to a mass spectrometer, and the partial filling technique was used in the on-line analysis. Seven plant species belonging to five genera (Plantago, Veronica, Melampyrum, Succisa and Valeriana) were screened for the iridoid glycosides by the new method that was developed. The findings confirmed those of an earlier study on five of the iridoid glycosides. Some new iridoid glycosides were found in Plantago lanceolata, Veronica spicata and V. chamaedrys.     

A comparative study of the enantiomeric separation of labeled amino acids with cyclodextrins and mixed micelles in capillary electrophoresis

Enantiomeric separations of fluorescently labeled amino acids are studied by capillary electrophoresis (CE) under a novel variety of experimental conditions. Three different labels are evaluated using two different additives: cyclodextrins (beta- and gamma-) and a dual surfactant system of sodium dodecyl sulfate and sodium taurodeoxycholate. Fluorescein-5-isothiocyanate is the best label to use in this cyclodextrin-based system, and dansyl chloride is the best label to use in this dual surfactant system. Possible limitations for separation of the enantiomers using the mixed micelle system include the fact that there is little interaction of the solute with the surfactants, the negative charge of the solute is limiting the separation window of the system, and the amount of the chiral phase available for partitioning is limited. The separations using cyclodextrins as a chiral selector show that the label affects migration order of the enantiomers, and the cyclodextrins are very effective in separating numerous enantiomers. Overall, cyclodextrins are the better buffer additive for CE use, and the dual surfactant systems, including sodium taurodeoxycholate, offer future promise.     

Niacin Determination in Legumes by Capillary Electrophoresis (CE). Comparison with High Performance Liquid Chromatography (HPLC)

Available and total niacin content in lentils and faba beans have been analyzed by capillary electrophoresis (CE), and the results compared with those obtained by high performance liquid chromatography (HPLC). Acidic and enzymatic hydrolysis have been carried out for available niacin determination, and an alkaline extraction performed for total niacin. The extracts were subsequently purified using a strong anion exchanger resin. Precise conditions for purification had to be worked out for each one of the two analytical methods (HPLC and CE). The HPLC analysis for available and total niacin was carried out in an ion-pair reverse phase column with UV detection at 261 nm. For the CE separation, the following conditions were employed: a 20 mM sodium tetraborate; 15 mM sodium dodecyl sulfate and 20% isopropyl alcohol solution as separation buffer; 30 kV and 25 or 30°C. Separation was carried out in a 70 cm effective length × 75 μm i.d. fused-silica capillary using on-column UV detection at 254 nm. The results obtained by CE for lentils and faba beans were similar to those obtained by HPLC.