Formation of rippled surface morphology during Si/Si （100） epitaxy by ultrahigh vacuum chemical vapour deposition

The Si epitaxial films are grown on Si (100) substrates using pure Si2H6 as a gas source using ultrahigh vacuum chemical vapour deposition technology. The values of growth temperature T_g are 650 ℃, 700 ℃, 730 ℃, 750 ℃, and 800 ℃. Growth mode changes from island mode to step-flow mode with T_g increasing from 650 ℃ to 700 ℃. Rippled surface morphologies are observed at T_g = 700 ℃, 730 ℃, and 800 ℃, but disappear when T_g = 750 ℃. A model is presented to explain the formation and the disappearance of the ripples by considering the stability of the step-flow growth.     

Historical overview and introduction

The complex balance of processes occurring at the cascade of exotic H-atoms is usually described by the so-called standard cascade model, but this model neglects variations of the kinetic energy T of the exotic atom during the cascade which are crucial for the analysis of several important experiments. New experimental results on T _μp at H₂ pressures between 0.063 and 4 hPa demonstrate the importance of acceleration due to Coulomb de-excitation processes at highly excited μp levels n > 9. The data at the lowest density are sensitive to the initial values of the kinetic energy and n-levels at the moment of atomic capture. From the measured low-energy tail of the T _μp-distribution it can be concluded that a considerable part of the μp(2s) atoms is metastable at pressures of a few hPa. This revised version was published online in August 2006 with corrections to the Cover Date.     

Phase-field simulation of dendritic growth in a binary alloy with thermodynamics data

This paper simulates the dendrite growth process during non-isothermal solidification in the Al-Cu binary alloy by using the phase-field model. The heat transfer equation is solved simultaneously. The thermodynamic and kinetic parameters are directly obtained from existing database by using the Calculation of Phase Diagram （CALPHAD） method. The effects of the latent heat and undercooling on the dendrite growth, solute and temperature profile during the solidification of binary alloy are investigated. The results indicate that the dendrite growing morphologies could be simulated realistically by linking the phase-field method to CALPHAD. The secondary arms of solidification dendritic are better developed with the increase of undercooling. Correspondingly, the tip speed and the solute segregation in solid-liquid interface increase, but the tip radius decreases.     

Multilayer transition in a spin-1 Blume–Capel model with RKKY interaction and quantum transverse anisotropy

Using mean-field theory, we have studied the effect of quantum transverse anisotropies with RKKY interaction on the multi-layer transition and magnetic properties of the spin-1 Blume--Capel model of a system formed by two magnetic multi-layer materials, of different thicknesses, separated by a non-magnetic spacer of thickness M. It is found that the multilayer magnetic order--disorder transition temperature depends strongly on the value of the transverse anisotropy. The multilayer transition temperature decreases when increasing the transverse anisotropy. Furthermore, there exists a critical quantum transverse anisotropy Δ_xL beyond which the separate transitions occur in the two magnetic layers. The critical transverse anisotropy Δ_xL decreases (increases) on increasing the non-magnetic spacer of thickness M (on increasing the crystal field), and Δ_xL undergoes oscillations as a function of the Fermi level.     

Hot deformation in nanocrystalline Ndben Feben B backward extruded rings

Radially oriented Nd-Fe-B rings are prepared by backward extrusion of fine grained melt-spun powder. Melt-spun powder with the nominal composition of Nd_30.5Fe_bal.Co_6.0Ga_0.6Al_0.2B_0.9 (wt%) is used as starting material. The effects of process variables, such as deformation temperature (T_d), strain rate (ε) and height reduction (Δh%), on the magnetic properties of the rings are investigated. A scanning electron microscope (SEM) equipped with an energy spectrum device is used to study the metallograph and microfracture of the extruded rings. The B_r and (BH)_max reach the optimum values at T_d=800℃, ε =0.01 mm/s, and Δh% =70%. It is found by SEM observations that the particle boundaries, which seemingly correspond to the interfaces of the starting melt-spun powders, emerge after the corrosion of metallography specimens. This is helpful for studying the effects of powder-powder interface on the local deformation and deformation homogeneity in the rings. For different spatial positions of the extruded rings, there are characteristic metallographies and microfractures. The upper end of the rings has the least deformation and worst texture, and therefore the worst magnetic properties. The magnetic properties in the radial direction increase slightly along the axis from the bottom to the middle, then steeply decrease at the upper end of the ring. The deformation and the formation-of-texturing processes are discussed. The deformation and the texturing formation of melt-spun Nd-Fe-B alloys probably involve grain boundary sliding and grain rotation, the solution-precipitation process and preferential growth of Nd₂Fe₁₄B nanograins along the easy growth a-axis.     

Effect of channelben protein interaction on translocation of a protein-like chain through a finite channel

We study the translocation of a protein-like chain through a finite cylindrical channel using the pruned-enriched Rosenbluth method (PERM) and the modified orientation-dependent monomer-monomer interaction (ODI) model. Attractive channels (ε_cp=-2.0, -1.0, -0.5), repulsive channels (ε_cp=0.5, 1.0, 2.0), and a neutral channel (ε_cp =0) are discussed. The results of the chain dimension and the energy show that Z₀=1.0 is an important case to distinguish the types of the channels. For the strong attractive channel, more contacts form during the process of translocation. It is also found that an external force is needed to drive the chain outside of the channel with the strong attraction. While for the neutral, the repulsive, and the weak attractive channels, the translocation is spontaneous.     

A phase-field model for simulating various spherulite morphologies of semi-crystalline polymers

A modified phase-field model is proposed for simulating the isothermal crystallization of polymer melts. The model consists of a second-order phase-field equation and a heat conduction equation. It obtains its model parameters from the real material parameters and is easy to use with tolerable computational cost. Due to the use of a new free energy functional form, the model can reproduce various single crystal morphologies of polymer melts under quiescent conditions, including dendritic, lamellar branching, ring-banded, breakup of ring-banded, faceted hexagonal, and spherulitic structures. Simulation results of isotactic polystyrene crystals demonstrate that the present phase-field model has the ability to give qualitative predictions of polymer crystallization under isothermal and quiescent conditions.     

Neutron diffraction study on composite compound Nd2Co7

The crystallographic and the magnetic structures of the composite compound Nd₂Co₇ at 300 K are investigated by a combined refinement of X-ray diffraction data and high-resolution neutron diffraction data. The compound crystallizes into a hexagonal Ce₂Ni₇-type structure and consists of alternately stacking MgZn₂-type NdCo₂ and CaCu₅-type NdCo₅ structural blocks along the c axis. A magnetic structure model with the moments of all atoms aligning along the c axis provides a satisfactory fitting to the neutron diffraction data and coincides with the easy magnetization direction revealed by the X-ray diffraction experiments on magnetically pre-aligned fine particles. The refinement results show that the derived atomic moments of the Co atoms vary in a range of 0.7 μ_B-1.1 μ_B and the atomic moment of Nd in the NdCo₅ slab is close to the theoretical moment of a free trivalent Nd³⁺ ion, whereas the atomic moment of Nd in the NdCo₂ slab is much smaller than the theoretical value for a free Nd³⁺ ion. The remarkable difference in the atomic moment of Nd atoms between different structural slabs at room temperature is explained in terms of the magnetic characteristics of the NdCo₂ and NdCo₅ compounds and the local chemical environments of the Nd atoms in different structural slabs of the Nd₂Co₇ compound.     

Intrinsic tunneling study of underdoped Bi2Sr2-xLaxCuO6+δ superconductors

We report on a tunneling study of underdoped submicron Bi₂Sr_2-xLa_xCuO_6+δ (La-Bi2201) intrinsic Josephson junctions (IJJs), whose self-heating is sufficiently suppressed. The tunneling spectra are measured from 4.2 K up to the pseudogap opening temperature of T^* = 260 K. The gap value found from the spectral peak position is about 35 meV and has a weak temperature dependence both below and above the superconducting transition temperature of T_c = 29 K. Since the superconducting gap should have a value of 10-15 meV, our results indicate that the pseudogap (～35 meV) plays an important role in the underdoped La-Bi2201 intrinsic tunneling spectroscopy down to the lowest temperature of 4.2 K. However, the contribution of the superconducting gap can be separated by normalizing the spectra to the one near and above T_c, which shows that the IJJs can be a useful tool for the study of the electronic properties of the La-Bi2201 cuprate superconductors.     

Crystal electric field next to a hydrogen-like interstitial— µ+ in PrNi5

Muon spin rotation measurements of the temperature dependence and the anisotropy of the μ⁺ Knight shift in single crystals of the crystal electric field singlet ground state system PrNi₅ reveal pronounced deviations from a linear scaling of the Knight shift with the bulk magnetic susceptibility atT≤50 K. They are explained by a μ⁺ induced modification of the atomic susceptibility of neighboring Pr³⁺ ions. From the Knight shift anisotropy atT> 50 K it is determined that the implanted μ⁺ occupy a single intersitial site, namely the 6i site (0.5, 0, 0.21±0.02). Using this site information, good model fits to the measured data are obtained assuming a μ⁺ induced perturbation of the crystal electric field at the Pr³⁺ ions next to the μ⁺. Apparently, the presence of the μ⁺ leads to a lowering of the local symmetry, causing a lifting of the degeneracy and a pronounced rearrangement of the low lying crystal electric field levels for these ions.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.