Synthesis and structure of biodegradable hexylene terephthalate-co-lactide copolyesters

To obtain a biodegradable polymer material with satisfactory thermal properties, higher elongation and modulus of elasticity, a new copolyester, poly(hexylene terephthalate-co-lactide) (PHTL), was synthesized via direct polycondensation from terephthaloyl dichloride, 1,6-hexanediol and oligo(lactic acid). The resulting copolyesters were characterized by proton nuclear magnetic resonance (¹H NMR), differential scanning calorimetry (DSC), thermogravimetry (TG) and wide-angle X-ray scattering (WAXS). By using the relative integral areas of the dyad peaks in ¹H NMR spectrum of copolyesters PHTL, the sequence lengths of the hexylene terephthalate and lactide units in the resultant copolyesters are 3.5 and 1.5, respectively. Compared to poly(hexylene terephthalate) (PHT), PHTL has lower T _m but higher T _g due to the incorporation of lactide unit into the main chains of copolyesters. The degradation test of copolyesters under a physiological condition shows that the degradability of PHTL is sped up due to incorporation of lactide segments.     

Ablative photodecomposition of polymer films by pulsed far-ultraviolet (193 nm) laser radiation: Dependence of etch depth on experimental conditions

Data on the ablative photodecomposition of three condensation polymers [polyimide, poly(ethylene terephthalate), and polycarbonate] and one addition polymer (polymethyl methacrylate) by laser pulses at 193 nm are presented. The etch depth/pulse is a linear function of the number of pulses at constant laser fluence. It varies with the logarithm of the fluence in a linear manner at different fluences. The etch depth is independent of the atmosphere above the film, whether it is air at 1 atm, or a vacuum. The etching of PMMA at fluences > 100 mJ/cm² is believed to follow a mechanism different from the process at lower fluences. Etching of polyimide and polyethylene terephthalate at 248 and 308 nm is also reported. The mechanism of etching by laser radiation may receive greater contribution from a thermal process with increasing wavelength. This is manifested in the etch depth versus log fluence plot by sharp changes in slope.     

New polymer syntheses. CIX. Biodegradable,alternating copolyesters of terephthalic acid,aliphatic dicarboxylic acids,and alkane diols

Copolyesters with an alternating sequence of terephthalic acid and aliphatic dicarboxylic acids were prepared with three different methods. First, dicarboxylic acid dichlorides were reacted with bis(2‐hydroxyethyl)terephthalate (BHET) in refluxing 1,2‐dichlorobenzene. Second, the same monomers were polycondensed at 0–20 °C in the presence of pyridine. Third, dicarboxylic acid dichlorides and silylated BHET were polycondensed in bulk. Only this third method gave satisfactory molecular weights. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry revealed that the copolyesters prepared by the pyridine and silyl methods might have contained considerable fractions of cyclic oligoesters and polyesters despite the absence of transesterification and backbiting processes. The alternating sequences and thermal properties were characterized with ¹H NMR spectroscopy and differential scanning calorimetry measurements, respectively. In agreement with the alternating sequence, all copolyesters proved to be crystalline, but the crystallization was extremely slow [slower than that of poly(ethylene terephthalate)]. A second series of alternating copolyesters was prepared by the polycondensation of silylated bis(4‐hydroxybut‐ yl)terephthalate with various aliphatic dicarboxylic acid dichlorides. The resulting copolyesters showed significantly higher rates of crystallization, and the melting temperatures were higher than those of the BHET‐based copolyesters. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3371–3382, 2001     

Electrospun Polyethylene Terephthalate/Graphene Nanocomposite as a New Solid-Phase Microextraction Fiber Coating for Enhanced Determination of Organochlorine Compounds

A new unbreakable solid-phase microextraction fiber coating based on polyethylene terephthalate/graphene nanocomposite was developed. The nanocomposite coatings were prepared by an electrospinning technique using a polyethylene terephthalate (PET) polymer solution containing the dispersed graphene on the outer surface of a stainless-steel rod. The applicability of polyethylene terephthalate/graphene nanocomposite coatings was examined by extraction of organochlorine compounds (OCs) including heptachlor epoxide, aldrin, γ-HCH, and β-HCH from aqueous samples in headspace mode. Influential parameters on extraction efficiency such as polymer concentration, the weight ratio of components, the electrospinning time, time and temperature of extraction, the salt concentration, and desorption condition were investigated. Eventually, the developed method was validated by gas chromatography micro electron capture detector (GC-µECD). At the optimum conditions, the intra-day relative standard deviations for the determination of chloro compounds in distilled water spiked at the levels of 400, 800, and 1500 ng L^??1 were 1.9–7.3% (n?=?3), the limit of detection is between 5 and 30 ng L^??1, and the calibration plots cover the 100 to 5000 ng L^??1 range. Inter-day precision values obtained for three replicates measured on different days were in the range of 2.6–9.5% at concentration levels of 400, 800, and 1500 ng L^??1. The method was applied to the analysis of (spiked) water samples and relative recoveries were found to range from 81 to 106%.     

Poly(ethylene terephthalate) copolymers containing 5‐nitroisophthalic units. II. Crystallization studies

The microstructure and crystallization behavior of a set of poly(ethylene terephthalate‐co‐5‐nitroisophthalate) copolymers (PETNI) containing 5‐nitroisophthalic units in the 10–50 mol % range were examined and compared to those of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate‐co‐isophthalate) (PETI) copolymers. A ¹³C NMR analysis of PETNI copolymers in a trifluoroacetic acid solution indicates that they are random copolymers with average sequence lengths in accordance with ideal polycondensation statistics. Differential scanning calorimetry (DSC) studies show that PETNI containing 5‐nitroisophthalic units up to 20 mol % are able to crystallize and that crystallization takes place in these copolymers at much slower rates than in PET. Wide‐angle X‐ray diffraction from powder and fibers reveals that crystallizable PETNI adopts the same triclinic crystal structure as PET, with the nitroisophthalate units being excluded from crystallites. Fourier transform infrared in combination with cross‐polarization/magic‐angle spinning ¹³C NMR spectroscopy demonstrates the occurrence of a gauche–trans conversion encompassing the crystallization process. A correlation between DSC and spectroscopic data leads us to conclude that the content of trans conformer in the noncrystallized phase of PETNI is higher than in both PET and PETI copolymers and suggests that secondary crystallization in the homopolymer must proceed by a mechanism different than that in copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1553–1564, 2001     

Characterization of Poly(ethyleneoxyethylene terephthalate‐co‐adipate) using NMR Spectroscopy

Comonomer sequence distribution and ¹H‐NMR chemical shifts were determined for poly(ethyleneoxyethylene terephthalate‐co‐adipate) (PEOETA) copolyester. The sequence distribution of terephthalate (T) and adipate (A) residues was found to be random, which is typical for copolyesters synthesized via bulk polycondensation. The inner methylene protons of EOE residues appeared as a pair of doublets due to chemical shift differences among the EOE‐centered dyad sequences TT, TA, AT, and AA. The four equivalent phenylene protons of T residues appeared as a triplet due to chemical shift differences among the T‐centered triad sequences TTT, TTA (?ATA), and ATA. Higher‐order tetrad and pentad sensitivity were also observed for the inner methylene and phenylene protons, respectively, especially for TT‐ and TTT‐centered sequences. The sequence sensitivity of the phenylene protons was attributed to unique spatial interactions between themselves and protons within adjacent adipate and EOE units. These spatial interactions were confirmed using Nuclear Overhauser Enhancement Spectroscopy (NOESY).     

Thermal and spectroscopy studies on ternary miscibility and phase behavior in blends comprising poly(4‐vinyl phenol) and two aryl polyesters

Thermal analysis and Fourier transform infrared spectroscopy characterizations were performed on three ternary blend systems that comprise poly(4‐vinyl phenol) (PVPh) and any two of the three homologous aryl polyesters [poly(ethylene terephthalate) (PET), poly(trimethylene terephthalate) (PTT), and poly(butylene terephthalate) (PBT)]. Although PVPh is miscible with any one of the polyesters in forming a binary blend system, miscibility in ternary systems by introducing one more polymer of different structures to the blend system is not always expected. However, this study concludes that miscibility does exist in all these three ternary blends of all compositions investigated. Reasons and factors for such behavior were probed. Quantitative interactions in the ternary blend system were also estimated. The overall interaction energy density (B) by analysis of melting point depression for the PBT/PVPh/PET ternary blend system led to a negative value (B = −5.74 cal/cm³). Similarly, T_g‐composition analyses were performed on two other ternary blend systems, PET/PVPh/PTT and PTT/PVPh/PBT. Comparison of the qualitative results showed that the interaction energy densities in the other two ternary blend systems are similarly negative and comparable to the PBT/PVPh/PET ternary blend system. The Fourier transform infrared spectroscopy results also support the qualitative findings among these three ternary blend systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1339–1350, 2006     

Geminal poly(silyl ester)s: Highly labile degradable polymers

Geminal silyl ester linkages were used for the backbone construction of linear polymers, which exhibit rapid cleavage in the presence of atmospheric water. A series of poly(gem-silyl ester)s with two ester groups flanking each silicon atom were synthesized, in order to probe the effects of different silyl-substituted side-chain groups upon the physical and chemical properties. The transsilylation condensation reaction of bis(trimethylsilyl) terephthalate with dichlorodiisopropylsilane, dichlorodicyclohexylsilane, dichloromethyl-n-octadecylsilane, and dichloromethyl-4-methylphenethylsilane gave the four poly(gem-silyl ester)s with two isopropyl, two cyclohexyl, one methyl plus one octadecyl, and one methyl plus one 4-methyl-phenethyl side-chain groups per silicon, respectively. The polymers were characterized by NMR (¹H, ¹³C, and ²⁹Si), infrared spectroscopy (IR), size-exclusion chromatography (SEC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Hydrolytic degradation studies of the polymers solvated in tetrahydrofuran and as bulk samples in the solid state were performed in the presence of atmospheric water as the nucleophilic cleavage agent, and the molecular weight loss was monitored by SEC. Poly(diisopropylsilyl terephthalate) (1a) and poly(dicyclohexylsilyl terephthalate) (1b) were found to be more stable towards nucleophilic degradation in comparison to poly(methyl-n-octadecylsilyl terephthalate) (1c) and poly(methyl-4-methylphenethylsilyl terephthalate) (1d), due to the presence of sterically bulky isopropyl or cyclohexyl groups attached to the silicon atoms. All of the polymers degraded into small molecules upon hydrolysis, with the exception that the degradation products of 1c and 1d self-condensed in the solid state to form the respective polysiloxanes. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3606–3613, 1999     

Poly(ethylene terephthalate) terpolyesters containing isophthalic and 5‐tert‐butylisophthalic units

Poly(ethylene terephthalate‐co‐isophthalate‐co‐5‐tert‐butylisophthalate) (PETI^tBI) terpolymers were investigated with reference to poly(ethylene terephthalate) (PET) homopolymer and poly(ethylene terephthalate‐co‐isophthalate) (PETI) copolymers. Three series of PETI^tBI terpolyesters, characterized by terephthalate contents of 90, 80, and 60 mol %, respectively, with different isophthalate/5‐tert‐butylisophthalate molar ratios, were prepared from ethylene glycol and mixtures of dimethyl terephthalate, dimethyl isophthalate, and 5‐tert‐butylisophthalic acid. The composition of the terpolymers and the composition of the feed agreed. All terpolymers had a random microstructure and number‐average molecular weights ranging from 10,000 to 20,000. The PETI^tBI terpolyesters displayed a higher glass‐transition temperature and a lower melting temperature than the PETI copolymers having the same content of terephthalic units. Thermal stability appeared essentially unchanged upon the incorporation of the 5‐tert‐butylisophthalic units. The PETI^tBIs were crystalline for terephthalate contents higher than 80 mol %, and they crystallized at lower rates than PETI. The crystal structure of the crystalline terpolymers was the same as that of PET with the 1,3‐phenylene units being excluded from the crystalline phase. Incorporation of isophthalate comonomers barely affected the tensile modulus and strength of PET, but the brittleness of the terpolymers decreased for higher contents in 5‐tert‐butylisophthalic units. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 124–134, 2003     

Determination and comparison of the plane stress essentialwork of fracture of three polyesters PET, PPT and PBT

The essential work of fracture (EWF) method has been used to study the relationship between molecular structure and thin film fracture toughness for three ductile polyesters at ambient temperature. The fracture toughness of PPT is of particular interest. Successful fracture characterisation of thin film polyesters has been achieved by the EWF method using double edge notched tension (DENT) specimens. The specific essential work of fracture, w _e, for polyethylene terephthalate (PET), polypropylene terephthalate (PPT) and polybutylene terephthalate (PBT) films is found to be 35.54±2.56, 41.03±3.23 and 31.34±8.60 kJ m^–2, respectively. Differential scanning calorimetry (DSC) has been employed to investigate the crystallinity of the polymers concerned and the effect of this on their EWF values.     

Synthesis of halide anion‐doped bismuth terephthalate hybrids for organic pollutant removal

Halide anion‐doped bismuth terephthalate hybrids were synthesized using a facile solvothermal method. Four series of hybrids doped with halide anions X^? (F^?, Cl^?, Br^? and I^?) were produced by varying the molar ratios (n) of X^? relative to Bi(NO₃)₃ (n = 0.25, 0.5, 0.75 and 1) in dimethylformamide solution. The results indicated that 0.25 equiv. of different halide anion‐doped bismuth terephthalate hybrids, especially BiBDC‐Cl(0.25) and BiBDC‐Br(0.25), exhibited excellent photocatalytic activity under visible light and UV light irradiation. They also exhibited excellent adsorption performance for Rhodamine B which could be attributed to high surface areas and negative charge on the surface of the catalysts. Moreover, the degradation of Rhodamine B under visible light irradiation is a photosensitization process and ^?O₂^? is the most important active species. The halide anion‐doped bismuth terephthalate hybrids are promising photocatalysts for removal of organic pollutants. Copyright © 2016 John Wiley & Sons, Ltd.     

Broad-line NMR and dynamic mechanical behavior of some aromatic polyesters

The dynamic mechanical properties of four aromatic polyesters were measured at temperatures in the 78–540°K region at 10³–10⁴ cps. The polymers studied were: poly(1,3 phenylene isophthalate), poly(1,4 phenylene terephthalate), poly(4,4′ diphenylene isophthalate), and poly(4,4′ diphenylene terephthalate). All four polymers had β loss peaks at about 280°K. Distinct β^* mechanical processes were found for the two terephthalate esters. Broad-line nuclear magnetic resonance measurements were carried out in the 150–440°K temperature range on the four polyesters mentioned above in addition to poly(4,4′ diphenylene 4,4′ biphenyl dicarboxylate). A change in NMR second moment takes place in the 190–330°K region, the magnitude of which is dependent on the polymer structure. The results are compared with those found for a series of aromatic polyamides and are discussed in terms of possible motional processes.     

Syntheses and Characterization of Three New Compounds Based on Terephthalate and 2‐(2‐Pyridin‐4‐yl‐vinyl)benzimidazole Ligands

Three new compounds based on H₂BDC and PyBImE [H₂BDC = 1,4‐benzenedicarboxylatic acid, PyBImE = 2‐(2‐pyridin‐4‐yl‐vinyl)benzimidazole], namely, [Co(PyBImE)(BDC)(H₂O)₂] ( 1 ), [Co(PyBImE)₂(HBDC)(BDC)_0.5] ( 2 ), and [(HPyBImE)⁺ · (BDC)²–_0.5 · (H₂BDC)_0.5] ( 3 ), were synthesized by hydrothermal methods and characterized by single‐crystal X‐ray diffraction. Compound 1 is a one‐dimensional chain bridged by terephthalate in a bis(monodentate) fashion. In the complex the nitrogen atom from N_BIm and the coordination water molecule complete the coordination sphere. In complex 2 , the dinuclear cobalt units are bridged by terephthalate in a bis(bidentate) fashion into a one‐dimensional chain, but different from complex 1 , the nitrogen atom from N_Py and the oxygen atom from hydrogenterephthalate complete the coordination sphere. Complex 3 is a co‐crystal with PyBImE and H₂BDC in a 1:1 ratio and the transfer of hydrogen atoms leads the complex into a salt. Interesting supramolecular structures are shown due to the hydrogen bonding as well as π ··· π interactions in the three complexes. Thermal and magnetic properties of 1 and 2 were also studied.     

Chain mobility of some terephthalic acid polyesters in solution. A 13C spin-relaxation study

Carbon-13 spin-lattice relaxation times (T₁), nuclear Overhauser enhancements (NOE), and resonance linewidths (Δp) have been measured for a series of terephthalic acid polyesters containing ethyl, butyl, hexyl, and isopropyl groups between neighboring terephthalate units. The relaxation parameters of all carbons in the terephthalate groups are independent of the length of the separating alkyl chain. Reduced NOE's are seen for all carbons. The data are interpreted in terms of a log X²distribution of correlation times of constant width, but variable average mobility. The average mobility in the alkyl chain increases with increasing distance from the terephthalate group in a given polymer. For a given position in the chain. mobility increases with increasing chain length. This behavior is consistent with the presence of independently reorienting, highly solvated terephthalate groups.     

Configurational properties of aromatic polyesters: Dipole moments of poly(diethylene terephthalate) chains

Dielectric constants have been determined for a fraction of poly(diethylene terephthalate) in benzene at several temperatures. The data indicate that the dipole moment ratio 〈μ²〉/Nm² is somewhat higher than that of poly(ethylene oxide), and its temperature coefficient is in the vicinity of zero. Both the dipole ratio and its temperature coefficient are in very good agreement with those predicted by the rotational isomeric state theory. Using this theory, the unperturbed dimensions of poly(diethylene terephthalate) were calculated and it was found that (〈r²〉/M)_∞ = 0.80 Ų (g mol wt)^?1, a value intermediate between those of poly(ethylene oxide) (0.57) and poly(ethylene terephthalate) (1.05).     

Chain structure and thermal behavior of reactive blends of PET/LCP with bis(2-oxazoline)

The sequence structure and thermal behavior of reactive blends of poly(ethylene terephthalate) (PET) with the liquid crystalline copolyester 60 PHB/PET containing 60 mol % of p-hydroxybenzoic acid (PHB) with addition of bis(2-oxazoline) (BOZ) were studied in detail. ¹H NMR results indicate that both the number average sequence length of PET and PHB segments (L _PET and L _PHB) decrease with increasing mixing time and temperature via transesterification between PET and LCP. The transesterification is promoted in the presence of BOZ. As a consequence, the sequence structure and in turn the crystallization both from the glassy and the melt state and the melting behavior are markedly affected.     

Optical constants of poly(ethylene terephthalate) in the range of 1410-cm−1 IR absorption band

The optical constants, namely, the refractive index n and the absorption coefficient κ, have been determined for commercial poly(ethylene terephthalate) films of different types in the range of the IR absorption band at 1410 cm^?1 (the band of the internal standard). It has been proposed that the obtained spectra are characteristic of poly(ethylene terephthalate).     

Behavior of pressure dependence of melting temperatures in aromatic polyesters: Influence of polymer structure

The thermal behavior of three aromatic polyesters in a homologous series, poly(ethylene terephthalate) (PET), poly(trimethylene terephthalate) (PTT), and poly(butylene terephthalate) (PBT) was studied under hydrostatic pressure up to 200 MPa by using a high pressure differential thermal analysis apparatus. Confining fluid high pressure dilatometer was used to establish the volume–temperature curves (in both solid and liquid regions) from which volume change on melting of these polyesters at atmospheric pressure was determined. Single endothermic peak was seen for PET and PTT, whereas PBT showed double peaks above 50 MPa. Pressure coefficient of melting temperature at atmospheric pressure (dT_m/dp₍₀₎), was obtained from the quadratic fit. The dT_m/dp₍₀₎ for PTT was newly determined to be 0.445 KMPa^?1, whereas for PET and PBT were 0.503 and 0.455 KMPa^?1, respectively, comparable to reported values. The dT_m/dp₍₀₎ exhibited the odd‐even behavior corresponding to odd and even number of methylene groups in the repeat unit. Enthalpy and entropy of fusion had the most influence on this coefficient. Entropy related to conformational and volume change were evaluated and the former was found to have a significant impact on the value of dT_m/dp₍₀₎. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1799–1808, 2009     

Poly[[tetraaquadi‐μ4‐glutarato‐μ2‐terephthalato‐dineodymium(III)] heptadecahydrate]

The title compound, [Nd₂(C₅H₆O₄)₂(C₈H₄O₄)(H₂O)₄]·17H₂O, obtained via hydrothermal reaction of Nd₂O₃ with glutaric acid and terephthalic acid, assembles as a three‐dimensional open framework with ten‐coordinate Nd–O polyhedra. The asymmetric part of the unit cell contains half a glutarate anion, a quarter of a terephthalate dianion, half an Nd^III cation, one coordinated water molecule and 4.25 solvent water molecules. Each [NdO₁₀] coordination polyhedron is comprised of six O atoms originating from four glutarate anions, two others from a terephthalate carboxylate group, which coordinates in a bidentate fashion, and two from water molecules. The Nd—O distances range from 2.4184 (18) to 2.7463 (18) Å. The coordination polyhedra are interconnected by the glutarate anions, extending as a two‐dimensional layer throughout the bc plane. Individual two‐dimensional layers are interlinked via terephthalate anions along the a axis. This arrangement results in rectangular‐shaped cavities with interstices of approximately 3.5 × 6 × 6.5 Å (approximately 140 ų), which are occupied by water molecules. The Nd^III cations, terephthalate anions, glutarate anions and one of the interstitial water molecules are located on special crystallographic positions. The Nd–terephthalate–Nd units are located across twofold rotation axes parallel to [100], with the Nd^III cations located directly on these axes. In addition, the terephthalate anion is bisected by a crystallographic mirror plane perpendicular to that axis, thus creating an inversion centre in the middle of the aromatic ring. The glutarate ligand is bisected by a crystallographic mirror plane perpendicular to (001). One of the solvent water molecules lies on a site of 2/m symmetry, and the symmetry‐imposed disorder of its H atoms extends to the H atoms of the other four solvent water molecules, which are disordered over two equally occupied and mutually exclusive sets of positions.     

Synthesis,Characterization and Catalytic Behaviour of Silica Supported Zinc Salicylaldimine Complex

Zinc salicylaldimine complex immobilized on silica gel was used as a promising catalyst for the transesterification reaction of dimethyl terephthalate (DMT) and ethylene glycol (EG).The catalyst was characterized by Fourier transform infra‐red spectroscopy (FT‐IR), thermogravimetric analysis (TGA) and atomic absorption spectroscopy (AAS). The product bis‐(2‐hydroxyethyl)terephthalate (BHET)was confirmed by mass and ¹H‐NMR studies. In comparison to zinc acetate i.e., homogeneous catalyst, a polymer supported catalyst showed better stability, catalytic activity and ease of separation from the reaction product. The catalyst can be reutilized during successive catalytic cycles.