The Course of the Catalytic Hydrogenation/Isomerization Reaction of Steroidal Ring B Olefins in the 13β- and 13α-Series

The course of the catalytic hydrogenation and isomerization (H₂/Raney-Ni/dioxane or H₂/Pd/C/EtOH) of Δ^5.7-, Δ⁷-, Δ⁸-, and Δ⁸⁽¹⁴⁾-steroid olefins was shown to depend strongly on the configuration at C(13). The known hydrogenation/isomerization of reactions of Δ^5.7-dienes in the 13β-series to Δ⁷-(H₂/Raney-Ni/dioxane) and Δ⁸⁽¹⁴⁾-olefins (H₂/Pd/C/EtOH) were also confirmed in the 3β, 19-epoxy-13β- and 3-Oxo-19-acetoxy-13β-steroid series (e.g. 32 → 35 → 37 , Scheme 3). On the other hand, in the corresponding 13α-steroid series the same reactions afforded the Δ⁷-. and the Δ⁸-olefins (mixture of products with H₂/Raney-Ni/dioxane; quantitatively the Δ⁸-compounds with H₂/Pd/C/EtOH; s. e.g. Scheme 3). A similar dependence on the C(13) configuration was observed in the allylic oxidation of these olefins with SeO₂ (Fieser's test, see Table), and in the acid catalyzed opening of the 7α, 8α-epoxides (e.g. 60 → 62 + 63 in the 13β-series, and 56 → 64 + 65 in the 13α-series, Scheme 8).     

Metal complexes of macrocyclic ligands. Part XXXVII. Synthesis of Heteroditopic Bis-macrocycles and Their Potential for Preparing Heterobinuclear Metal Complexes

A new and generally applicable synthetic path for the preparation of heteroditopic bis-macrocycles using tri-N-protected tetraazacycloalkanes as building blocks and bromoacetyl bromide as bridging reagent is described. In the first step, bromoacetyl bromide is used as acylating agent for one of the macrocycles, whereas in the second step it is used as alkylating agent for the second macrocycle, thus giving protected bis-macrocyclic amides (e.g. 6 ). After reduction of the amide moiety and deprotection, bis-azamacrocycles with an ethylene bridge are obtained (e.g. 8 ). The corresponding homoditopic bis-macrocycles 16 and 17 are also prepared for comparison purpose. Spectrophotometric studies indicate that bis-macrocycle 8 , which consists of a 12- and a 14-membered ring, binds two metal ions with equal affinity, whereas compound 13 , in which an unsubstituted (cyclam) and a trimethyl-substituted tetraazacyclotetradecane unit (Me₃cyclam) are bridged, shows selective metal-ion binding. The first metal ion is always incorporated into the cyclam unit, whereas the second one binds to the Me₃cyclam macrocycle. Thus, by sequential addition of two different metal ions, heterobinuclear complexes can easily be prepared. The electrochemistry of the binuclear Ni²⁺ complexes, studied by CV and DPV, as well as the EPR spectra of the binuclear Cu²⁺ complexes clearly indicate metal-metal interactions.     

Photochemische Erzeugung und Reaktionen des Benzonitril-benzylids. 42. Mitteilung über Photoreaktionen

Photochemical Generation and Reactions of Benzonitrile-benzylide The low temperature irradiation of 2,3-diphenyl-2H-azirine ( 1 ) in DMBP-glass at ?196° has been reinvestigated. It was possible to convert 1 nearly quantitatively into the dipolar species benzonitrile-benzylide ( 3 , Φ₃ = 0,78), which exhibits UV.-absorptions at 344 (? = 48000) and 244 nm (? = 28500) (Fig. 1, Tab. 1). Irradiation of 3 with 345 nm light at ?196° resulted in almost complete reconversion to the azirine 1 (Φ = 0,15; Fig. 2). When the solution of 3 in the DMBP-glass was warmed up to about ?160° a quantitative dimerization to 1,3,4, 6-tetraphenyl-2,5-diaza-1,3,5-hexatriene ( 8 ) occurred. This proves that 8 is not only formed by the indirect route 3 + 1 → 7 \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\longrightarrow }\limits^{hv} $\end{document} 11 → 8 known before (Scheme 1), but also by dimerization of 3 either by direct head to head coupling or via the intermediate e (p. 2675), followed by a fast thermal hydrogen transfer reaction. The occurrence of the dipolar intermediate 11 in the photochemical conversion of the bicyclic compound 7 to 8 could also be demonstrated by low temperature experiments: On irradiation at ?196° 7 gave the cherry red dipolar intermediate 11 (λ_max = 520 nm), which at ?120° isomerizes to 8 . It should be noted, that neither 7 nor 11 are formed by dimerization reactions of 3 . Experiments carried out at room temperature demonstrate, that both processes for the formation of 8 may compete: Irradiation of a solution of 1 (DMBP, c = 8 × 10^?4 to 5 × 10^?3M ) with 350 nm light of high intensity (which does not excite the bicyclic compound 7 ) leads to a relative high photostationary concentration of the dipolar species 3 . Under these conditions the formation of 8 is due to dimerization of 3 (Φ₈ = 0,19). With low light intensity only a very low stationary concentration of 3 can be obtained. Therefore the reaction of 3 with 1 , leading to the bicyclic intermediate 7 , becomes now predominant (Φ_?1 = 1,55, which corresponds with the expected value of 2 × 0,8). Irradiation of 1 at ?130° with 350 nm light of high intensity gives 8 with a quantum yield of 0,44. This is in agreement with the theoretical value Φ₈ = 0,4 for an exclusive formation of 8 by dimerization of 3 . The lower quantum yield for the formation of 8 at room temperature makes probable that under these conditions 3 not only dimerizes to 8 , but also to another, so far unidentified dimer, e.g. 2,3,5,6-Tetraphenyl-2,5-dihydropyrazine. By flash photolysis of a solution of 1 (cyclohexane, c = 10^?4M , 25°) the disappearance of 3 could directly be measured by UV.-spectroscopy: At relative high concentrations (c ≥ 10^?7M ) 3 disappeared according to a second order reaction with the rate constant k = 5 × 10⁷M ^?1S ^?1. At lower concentrations (c ≤ 10^?7M) the rate of disappearance of 3 follows first order kinetics. The rate constant of this pseudo first order reaction ( 3 + 1 → 7 ) has been determined to be 1 → 10⁴M^?1S^?1. Using Padwa's table of relative rates for the cycloaddition of the dipolar species 3 to various dipolarophiles, including the azirine 1 , an absolute rate constant of k ≈ 8 × 10⁸M ^?1S ^?1 for the addition of 3 to the most active dipolarophile fumaronitrile could be estimated. In cyclohexane at room temperature, the diffusion controlled rate constant equals 6,6 × 10⁹M ^?1S ^?1. In Table 1 the UV.-maxima of several nitrile-ylides, among them a purely aliphatic one, are given.     

Verdampfung von Kupfer(II)chlorid und Struktur des Dampfes untersucht mit UV./VIS.- und Raman-Spektroskopie

The vapour pressure of CuCl₂ and the dimerization of CuCl₂(g) have been investigated by optical spectroscopy in the range 420–650°C, p = 0.5-5 atm. The enthalpy of dimerization of CuCl₂(g) was determined by visible and by Raman spectroscopy and good agreement was found (?154 kJmol^?1 and ?143 kJmol^?1). CuCl₂(g) shows two totally symmetric Raman modes (373 and 127 cm^?1) indicating that, at least at elevated temperatures, CuCl₂(g) is not a linear molecule. The optical spectra of Cu₂Cl₄(g) and CuLCl₅(g) (L ? Ga, In) are very similar supporting a CuCl₃-chromophor in both cases. The formerly proposed structure of CuL₂Cl₈(g) (L ? Al, Ga) contains bridging and terminal chlorides, structural elements also present in Cu₂Cl₄(g). In agreement with the proposed structure v is identical in Cu₂Cl₄(g) and CuL₂Cl₈(g), while V is at lower energies (20–30 cm^?1) in CuL₂Cl₈(g) than in Cu₂Cl₄(g).     

Synthesis and Biological Activity of Ethyl 4‐Alkyl‐2‐(2‐(substituted phenoxy)acetamido)thiazole‐5‐carboxylate

A series of novel ethyl 4‐(methyl or trifluoromethyl)‐2‐(2‐(substituted phenoxy)acetamido)thiazole‐5‐carboxylates 7a , 7b , 7c , 7d , 7e and 8f , 8g , 8h , 8i , 8j , 8k , 8l , 8m , 8n , 8o , 8p , 8q , 8r were synthesized, and their structures were confirmed by IR, ¹H‐NMR, MS spectra and elemental analysis. The results of preliminary bioassays show that some of the title compounds exhibit moderate to good herbicidal activities. Compared with the fluorine free compounds 7a , 7b , and 7e , the compounds bearing fluorine 8g , 8j , and 8q showed higher herbicidal activities with 70–100% inhibition against Capsella bursa‐pastoris, Amaranthus restroflexus, and Eclipta prostrata at the dosage of 150 g/ha, which indicated that the trifluoromethyl on the thiazole ring was beneficial for the herbicidal activity. Furthermore, compounds 8f , 8g , 8h , 8i , 8j , 8k , 8l , 8m , 8n , 8o , 8p , 8q , 8r were tested for fungicidal activity against Pseudoperonospora cubensis at 500 µg/mL. Compounds 8f and 8q showed the best fungicidal activity with more than 80% inhibition.     

Der [M+11]+-Pik in den Massenspektren von Diaminen 38. Mitteilung über massenspektrometrische Untersuchungen

The [M+ U]⁺-Peak in the Mass Spectra of Diamines The mass spectra of di- and polyamines containing a 1,2-ethandiamine or a 1,3-propandiamine unit are quite often characterized by [M+ 1l]⁺-peaks. It is demonstrated that these peaks correspond to a fragment-ion formed by loss of H. from a formaldehyde-condensation product (e. g. 15) or by loss of CH³. from a acetaldehyde-condensation product (e. g. 16 ) with the diamine. The aldehydes are usually impurities in solvents (especially methanol) used by chromatography, synthesis etc. of the diamines.     

Effect of cucurbit[n]urils on tropicamide and potential application in ocular drug delivery

The supramolecular interactions of the ocular drug tropicamide (TR) with cucurbit[7]uril (CB7) and cucurbit[8]uril (CB8) were investigated in aqueous solutions by using ¹H NMR, ESI-MS and UV–vis spectroscopic techniques. The results indicate a 1:1 binding stoichiometry of TR with CB7 and CB8. The binding constants of TR in its protonated form were higher (e.g. K = 4 × 10⁶ M^? 1 with CB8) than in its neutral form (e.g. K = 1.4 × 10⁴ M^? 1 with CB8), which led to a complexation-induced increase in its pK _a value of ca. 0.5 and 2 units with CB7 and CB8, respectively. In the presence of about 1% (w/v) CB8, the ionisation degree of 0.1% (w/v) TR was increased from 2% to 62% at neutral pH. The increase in the pK _a value and thus stabilisation of the protonated TR species at neutral pH is discussed in the context of supramolecular drug delivery of ophthalmologic drugs.     

Inclusion complexes of the natural product gossypol. Recognition by gossypol of halogeno methanes. Structure of the dichloromethane complex of gossypol and single crystal conservation after decomposition

The structures of gossypol complexes are extremely sensitive to the halogenomethane present as the guest; e.g. changing the number of Cl atoms in chloromethane derivatives changes the structure of the gossypol complex. The crystals of C₃₀H₃₀O₈·CH₂Cl₂ are monoclinic, space groupC2/c,a=21.320(4),b=19.199(6),c=15.765(2)Å, =113.05(2)^o,V=5916(2)ų,Z=8,D _x=1.35 g/cm³,T=295 K. The structure has been solved by direct methods and refined to the finalR value of 0.084 for 1828 reflections. In the structure H-bonded gossypol molecules form columns, generating channels in the structure which are filled by guest molecules. After decomposition (desolvation) monocrystals of the complexes are conserved without destruction, in which there are rather wide and empty channels though slightly smaller than in the complex. An attempt is made to explain some peculiarities of the behavior of the gossypol polymorph formed on the basis of its structure with empty channels. Supplementary data relevant to this article have been deposited with the British Library Publication No. SUP 82165 (17 pages).     

Photochemische Reaktionen. 62. Mitteilung [1]. Die Photofragmentierung von O-acetyljervin

On ultraviolet irradiation O-acetyljervine ( 1 ) is subjected to several parallel fragmentations. From the complex reaction mixtures obtained in a variety of solvents (dioxan, tetrahydrofuran, acetonitrile, iso-octane, benzene) the major alicyclic products 6 – 8 and the heterocyclic compounds 12 – 16 have been isolated. Products 6 – 8 undergo further photochemical changes, e.g., decarbonylation of 7 to 9 and hydrolytic cleavage of 8 to 10 . These photofragmentations are initiated almost specifically upon selective π → π* excitation at 2537 Å with a quantum yield of Φ²⁵³⁷ = 0.145 for conversion of starting material. Reaction upon irradiation in the long-wavelength n → π* absorption band is very much less efficient (Φ³⁶⁶⁰ = 0.611 · 10^?3, both determinations for O-trimethylsilyl-jervine ( 2 ) in tetrahydrofuran). A high degree of photostability is observed also at 2537 Å on N-protonation of O-acetyljervine ( 1 ) in acetic acid. Furthermore, reactivity is greatly reduced for the N-methyl ( 3 ) and N-acetyl ( 4 ) derivatives in neutral solvents at 2537 Å. N-Chloro-O-acetyljervine ( 5 ) in dioxan at 2537 Å gave preferentially O-acetyljervine hydrochloride.     

Synthesis and Antimicrobial Activity of Novel 2‐Substituted Phenoxy‐N‐(4‐substituted Phenyl‐5‐(1H‐1,2,4‐triazol‐1‐yl)thiazol‐2‐yl)acetamide Derivatives

A series of 2‐substituted phenoxy‐N‐(4‐substituted phenyl‐5‐(1H‐1,2,4‐triazol‐1‐yl)thiazole‐2‐yl)acetamide derivatives 8a , 8b , 8c , 8d , 8e , 8f , 8g , 8h , 8i , 8j , 8k , 8l , 8m , 8n , 8o , 8p , 8q , 8r , 8s , 8t was synthesized by the reaction of phenoxyacetyl chloride 7 with intermediate 4‐substituted phenyl‐5‐(1H‐1,2,4‐triazol‐1‐yl)thiazol‐2‐amine 5 . Their structures were confirmed by ¹H NMR, ¹³C NMR, MS, IR, and elemental analyses. The synthesized compounds were also screened for their antimicrobial activity against three types of plant fungi (Gibberella zeae , Phytophthora infestans , and Paralepetopsis sasakii ) and two kinds of bacteria [Xanthomonas oryzae pv. oryzae (Xoo ) and Xanthomonas axonopodis pv. citri (Xac )] showing promising results. In particular, 8b , 8f , 8g , and 8h exhibited excellent antibacterial activity against Xoo , with 50% effective concentration (EC₅₀) values of 35.2, 80.1, 62.5, and 82.1 µg/mL, respectively, which are superior to the commercial antibacterial agent bismerthiazol (89.9 µg/mL). The preliminary structure–activity relationship studies of these compounds are also briefly described.     

A thermodynamic and kinetic study on the stability of the conformational states of N-acetyl-proline-methylamide by IR. Spectroscopy and chemical relaxation

N-Acetyl-proline-methylamide (APMA) was synthesized by the mixed anhydride method and investigated by IR. spectroscopy and chemical relaxation measurements. The temperature-induced variation of the IR. absorption bands of the internally hydrogen bonded (b) and of the extended, unbonded (e) species at 3330 and 3450 cm^?1 respectively, were used to evaluate the molar absorptivities, a(b) = 280 and a(e) = 50 l/mol · cm, the equilibrium constant K = 0.70, and the molar enthalpy of reaction ΔH = ? 2280 ± 60 cal/mol. The entropy was estimated to be in the range ? 8 to ? 9 e.u. The reaction rates of this conformational transition were measured by the chemical dipole field effect. The relaxation time of the rate process is τ = 2.7 · 10^?9s, the rate constant for the formation of the hydrogen bond k(b) is 2.2 · 10⁸ s^?1, and that for the unfolding accompanied by the breakage of the amide hydrogen bond k(e) is 1.5 · 10⁸s^?1.     

Synthesis and Antimicrobial Activity of Some Novel [4‐(1,2,3‐thiadiazol‐4‐yl)phenoxy]methylene anchored 1,3,4‐triazoles and 1,3,4‐thiadiazoles

A series of novel [4‐(1,2,3‐thiadiazol‐4‐yl)phenoxy]methylene anchored 1,3,4‐triazoles ( 8a , 8b , 8c , 8d , 8e , 8f , 8g , 8h ) and 1,3,4‐thiadiazoles ( 9a , 9b , 9c , 9d , 9e , 9f , 9g , 9h , 9i ) were synthesized from thiosemicarbazide ( 7a , 7b , 7c , 7d , 7e , 7f , 7g , 7h , 7i , 7j ). The structures of these newly synthesized compounds were confirmed on the basis of IR, ¹H‐NMR, mass spectral techniques, and elemental analysis. The in vitro antimicrobial screenings of the synthesized compounds were carried out against four bacterial pathogens, namely Staphylococcus aureus, Streptococcus pyogenes, Escherichia coli, Pseudomonas aeruginosa and three fungal pathogens Candida albicans, Aspergillus niger and Aspergillus clavatus, using broth microdilution minimum inhibitory concentration method. The compounds 7d , 7j , 8a , 9a , 9b , and 9i exhibited promising antibacterial activity against the tested strains, whereas some compounds were found to be active against one of the tested bacterial strains.     

Zum Mechanismus der Photochemie des Benzfurazans

Mechanistic studies on the photochemical reactions of benzfurazan . From other works it is known that irradiation of benzfurazan ( 1 ) in methanol gives the carbaminacid-ester 4 , whereas in benzene the azepinederivative 3 is obtained (Scheme 1). The compounds 5–8 (Scheme 2) have been proposed as intermediates. In our investigations we detected and characterized by means of UV.- and IR.-spectroscopy the two species 5 and 8 . Irradiation of 1 with 350 nm light at room temperature in a strongly polar solvent (e.g. H₂O) yields exclusively 5 (Fig. 1) with a quantum yield of 0.48. In non polar solvents (e.g. hexane) 5 isomerizes in a second photochemical step to 8 (quantum yield 0.43) (Fig. 3). Thermally, 5 can be converted back to 1 . The rate constant for this reaction at room temperature is 2 · 10^–5s^–1. The transformation 5 → 8 was also investigated at low temperature. There was no direct evidence for any intermediates of the type oxazirene ( 6 ) or nitrene ( 7 ). However, the formation of azepine 3 upon irradiation of 5 in benzene suggests as intermediate the nitrene 7 which could be converted into 8 in a fast thermal reaction (Scheme 3).     

1,6‐ and 1,7‐naphthyridines. IV. Synthesis of hydroxycarboxamide derivatives

A series of 8‐hydroxy‐1,6‐naphthyridin‐5(6H)‐one‐7‐carboxamides 1 and the isomeric 5‐hydroxy‐1,7‐naphthyridin‐8(7H)‐one‐6‐carboxamides 2 were synthesized. N‐Lactam unsubstituted compounds 1a‐c and 2a,b were obtained by alkoxide‐induced rearrangement of the corresponding quinolinimidoacetamides 3 . Compounds 1e,f and 2e,f were synthesized by heterocyclization of the corresponding quinolinamic esters 6 and 7 . Spectroscopic properties (uv, ir, ¹H and ¹³C nmr and ms) were analyzed and the proposed structures confirmed.     

Resorcinol - formaldehyde adsorption of cesium from Hanford waste solutions

Batch equilibrium measurements were conducted at 25±2 °C with a granular resorcinol-formaldehyde (RF) resin to determine the distribution coefficients (K _d ) for cesium. In the tests, Hanford Site actual waste sample containing radioactive cesium (¹³⁷Cs) and a pretreated waste sample that was spiked with non-radioactive ¹³³Cs were used. Initial concentrations of non-radioactive cesium in the waste sample were varied to generate an equilibrium isotherm for cesium. Majority of the tests were conducted at 25±2 °C using a liquid to solid phase ratio of 100 ml/g and at a contact time of 72 hours. Two additional tests were conducted at a liquid to solid phase ratio of 10 and at contact time of 120 hours. The measured distribution coefficient (K _d ) for radioactive cesium (¹³⁷Cs) was 948 ml/g, the K _d for non-radioactive cesium (¹³³Cs) was 1039 ml/g. The K _d for nonradioactive cesium decreased from 1039 to 691 ml/g with increased initial cesium concentration from 8 to 64 g/ml. Very little change of the K _d was observed at initial cesium concentration above 64 g/ml. The maximum sorption capacity for cesium on granular RF resin was 1.17 mmole/g dry resin. This value was calculated from the fit of the equilibrium isotherm data to the Dubinin-Radushkevich equation. Previously, a total capacity of 2.84 mmole/g was calculated by Bibler and Wallace for air-dried RF resin.This work was conducted at the Savannah River Technology Center in Aiken, SC, which is operated for the U. S. Department of Energy (DOE) by Westinghouse Savannah River Company under Contract DE-AC09-96SR18500. The Hanford River Protection Project-Waste Treatment Plant (RPP-WTP) funded this work. The authors are very grateful to Karen Palmer, Betty Mealer, and Yvonne Simpkins for their assistance in the experimental work.     

The Synthesis,Spectral, and Electrochemical Characterization of Novel Alkoxybenzoquinone Derivatives

The novel monosubstituted benzoquinone compounds 3e , 3g , 3h ; 2,5‐O‐ substituted benzoquinone compounds 4a , 4b , 4c , 4d , 4e 4g and known compound 4h and 2,6‐O‐ substituted benzoquinone compounds 5e , 5f , 5g , 5h were obtained by the reaction of p‐chloranil ( 1 ) and related alcohol compounds in potassium carbonate (K₂CO₃) solution of acetonitrile or chloroform with Et₃N. The novel cyclic compounds 7 , 8 and 10 , 11 were obtained from the reaction of p‐chloranil ( 1 ) and diols in potassium carbonate (K₂CO₃) solution of acetonitrile at room temperature. The structures of novel compounds were characterized by using micro analysis, FT‐IR, ¹H‐NMR, ¹³C‐NMR, MS and cyclic voltammetry.     

Resorcinol - formaldehyde adsorption of cesium from Hanford waste solutions

Batch equilibrium measurements were conducted at 25±2 °C with a granular resorcinol-formaldehyde (RF) resin to determine the distribution coefficients (K _d ) for cesium. In the tests, Hanford Site actual waste sample containing radioactive cesium (¹³⁷Cs) and a pretreated waste sample that was spiked with non-radioactive ¹³³Cs were used. Initial concentrations of non-radioactive cesium in the waste sample were varied to generate an equilibrium isotherm for cesium. Majority of the tests were conducted at 25±2 °C using a liquid to solid phase ratio of 100 ml/g and at a contact time of 72 hours. Two additional tests were conducted at a liquid to solid phase ratio of 10 and at contact time of 120 hours. The measured distribution coefficient (K _d ) for radioactive cesium (¹³⁷Cs) was 948 ml/g, the K _d for non-radioactive cesium (¹³³Cs) was 1039 ml/g. The K _d for nonradioactive cesium decreased from 1039 to 691 ml/g with increased initial cesium concentration from 8 to 64 g/ml. Very little change of the K _d was observed at initial cesium concentration above 64 g/ml. The maximum sorption capacity for cesium on granular RF resin was 1.17 mmole/g dry resin. This value was calculated from the fit of the equilibrium isotherm data to the Dubinin-Radushkevich equation. Previously, a total capacity of 2.84 mmole/g was calculated by Bibler and Wallace for air-dried RF resin.This work was conducted at the Savannah River Technology Center in Aiken, SC, which is operated for the U. S. Department of Energy (DOE) by Westinghouse Savannah River Company under Contract DE-AC09-96SR18500. The Hanford River Protection Project-Waste Treatment Plant (RPP-WTP) funded this work. The authors are very grateful to Karen Palmer, Betty Mealer, and Yvonne Simpkins for their assistance in the experimental work.     

Emulsifier-free emulsion polymerization of tetrafluoroethylene by radiation. II. Effects of reaction conditions on polymer particle size and number

The size, distribution, and number of PTFE particles formed by radiation-induced emulsifier-free polymerization were measured by electron microscope and automatic particle analyzer (centrifugation method). From the electron micrographs we found that the particles are formed within 5 min. The change in the number of polymer particles (n_p) with reaction time (t) depends on the relative concentration of growing polymer chains to stabilizing species produced by the radiolysis of water and monomer; that is, it was governed by TFE pressure/dose rate ratio and classified into three cases: case I, dn_p/dt = 0 (e.g., at 3 × 10⁴ rad/hr and 20 kg/cm²); case II, dn_p/dt < 0 (e.g., at dose rate below 1.9 × 10⁴ rad/hr and 20 kg/cm²); case III, dn_p/dt > 0 (e.g., at 3 × 10⁴ rad/hr and 2 kg/cm²). The polymer molecular weight above 10⁶ is almost independent of the particle size. The polymerization loci are mainly on the surface of polymer particles dispersed in the aqueous phase in cases I and II except in the initial stage. In case III new particles are formed successively during polymerization. Therefore the polymerization loci are mainly in the aqueous phase. Especially in case I, we concluded that after the generation of particles the propagation proceeds mainly on the surface of polymer particles like the core shell model proposed by Granico and Williams.     

Ferrocene Compounds. XXXI. Structure of 3-Ferrocenylpropanoic Acid

The title compound was prepared by modified procedure and characterized by means of IR, [¹H] and [¹³C] NMR spectroscopy. The structure was also determined by a single-crystal X-ray diffraction (XRD). 3-Ferrocenylpropanoic acid crystallizes as orange prisms in the triclinic space group P with a = 7.645(1) Å, b = 7.953(1) Å, c = 9.961(1) Å, = 81.67(1), = 68.43(1), = 83.76(1), V = 556.3(1) ų, Z = 2, R = 0.0435. In the ferrocene skeleton, Fe-C distances are in the range 2.033(2)–2.052(2) Å and C C distances in the range 1.412(5)–1.431(3) Å. The angle defined by ring centers and Fe atom is 177.7(1). The cyclopentadienyl rings are twisted from the eclipsed conformation by 8.3(2) (average value). In the structure was observed strong intermolecular hydrogen bond of 2.670(3) Å forming cyclic dimers of the R₂ ² (8) type.     

Single‐Chain Self‐Folding of Synthetic Polymers Induced by Metal–Ligand Complexation

The controlled folding of a single polymer chain is for the first time realized by metal‐ complexation. α,ω‐Bromine functional linear polymers are prepared via activators regenerated by electron transfer (ARGET) ATRP (_,SEC = 5900 g mol⁻¹, Đ = 1.07 and 12 000 g mol⁻¹, Đ = 1.06) and the end groups of the polymers are subsequently converted to azide functionalities. A copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction is carried out in the presence of a novel triphenylphosphine ligand and the polymers to afford homotelechelic bis‐triphenylphosphine polymeric‐macroligands (MLs) (_,SEC = 6600 g mol⁻¹, Đ = 1.07, and 12 800 g mol⁻¹, Đ = 1.06). Single‐chain metal complexes (SCMCs) are formed in the presence of Pd(II) ions in highly diluted solution at ambient temperature. The results derived via ¹H and ³¹P{¹H} NMR experiments, SEC, and DLS unambiguously evidence the efficient formation of SCMCs via metal ligand complexation.