Selective Fluorogenic Derivatization with Isotopic Coding of Catechols and 2-Amino Phenols with Benzylamine: A Chemical Basis for the Relative Determination of 3-Hydroxy-tyrosine and 3-Nitro-tyrosine Peptides

The derivatization of catecholamines and catechols, first with diphenylethylenediamine and latter benzylamine, to apparently form the same highly fluorescent product has been described for many years. Based on fluorescence spectral evidence, previous conclusions were that the same product was formed for each analyte class with either reagent. In the present investigation this conclusion has been revisited by isolating and characterizing (X-ray crystal determination, MS, NMR, etc.) the product resulting from reaction of 4-methylcatechol with benzylamine. These investigations definitively establish that catecholamines and catechols undergo this reaction to form related but different 6-substituted 2-phenyl benzoxazole products. Based on a plausible product formation mechanism, it was postulated and shown that 2-aminocresol would participate in this fluorogenic derivatization reaction to form the same product as results from 4-methylcatechol. It appears that this is a general transformation available for analytes bearing the 2-hyroxyl-phenol (catechol) and/or the 2-amino-phenol moieties. Further experimentation confirmed that ²H₅-benzylamine reacts with 4-methylcatechol and 2-aminocresol to form the same product in identical analytical yield as previously noted for ¹H₅-benzylamine, thus establishing a potential chemical basis for the relative quantitation of 3-hyroxy-tyrosine (DOPA) residues and 3-nitro-tyrosine residues (reduction to the corresponding 3-amino-tyrosine residue required) in proteins that have been subjected to oxidative stress. In preliminary experiments relative quantitation was achieved for 4-methylcatechol and the 3-hydroxy-tyrosine containing peptide DOPA-Gly-Gly.     

Synthesis of water-soluble polymeric prodrugs possessing 4-methylcatechol derivatives by mechanochemical solid-state copolymerization and nature of drug release

In this study we synthesized the water-soluble polymeric prodrugs possessing a 4-methylcatechol (4MC) derivative as a side chain by mechanochemical solid-state copolymerization. 1-benzoyl-4-methylcatechol (Bz4MC) was selected as a model compound of 4MC, and its methacryloyl derivative (1) was synthesized. 6-O-methacryloyl-D-galactose (2) was also prepared as a water-soluble monomer. The mechanochemical solid-state copolymerization of 1 and 2 was carried out to obtain the water-soluble polymeric prodrug possessing the Bz4MC as a side chain. The mechanochemical copolymerization of 1 and 2 proceeded to completion, and the polymeric prodrug produced possessed a narrow molecular weight distribution. Three kinds of polymeric prodrugs, whose compositions were different from one another, were hydrolyzed in vitro. The hydrolysis of these polymeric prodrugs proceeded to completion. The rate constants of hydrolysis decreased with increasing the mole fraction of 1 in polymeric prodrug. It was suggested that the rate constant of hydrolysis could be controlled by the composition, the mole fraction of 1 in the polymeric prodrug.     

A green method for the electroorganic synthesis of new 1,3-Indandione derivatives

This is an environmentally friendly method in the field of electroorganic reactions under controlled potential electrolysis, without toxic reagents at a carbon electrode in an undivided cell which involves the (EC) mechanism reaction and comprises two steps alternatively; (i) electrochemical oxidation and (ii) chemical reaction. In particular, the electrochemical oxidation of 4-tert-butylcatechol, 4-methylcatechol and 2,3-dihydroxybenzoic acid in the presence of 2-phenyl-1,3-indandione has been studied in a water-acetonitrile (90 : 10) mixture. The research includes the use of a variety of experimental techniques, such as cyclic voltammetry, controlled-potential electrolysis, and spectroscopic identification of products (FT-IR, (1)H-NMR, and MS spectrometry).     

Study of the O-glycidylation of natural phenolic compounds. The relationship between the phenolic structure and the reaction mechanism

The O-alkylation reaction by epichlorohydrin of some natural phenolic compounds such as 4-methylcatechol, gallic acid, protocatechuic acid, pyrogallol and resorcinol was investigated. Phenolic compounds reacted first with epichlorohydrin in the presence of benzyltriethylammonium chloride as phase transfer catalyst. Then, an aqueous solution of sodium hydroxide was added.It was demonstrated that the two competitive mechanisms involved in the O-alkylation reaction were highly dependent of the starting material. The O-alkylated products obtained in this reaction could be further used as bisphenol A substitutes in the synthesis of epoxy resins pre-polymers.     

Ultrasmall c(RGDyK)-coated Fe3O4 nanoparticles and their specific targeting to integrin alpha(v)beta3-rich tumor cells

We report a direct synthesis of ultrasmall c(RGDyK) peptide-coated Fe3O4 NPs (<10 nm in hydrodynamic diameter) and demonstrate their in vivo tumor-specific targeting capability. The Fe3O4 NPs are synthesized by thermal decomposition of iron pentacarbonyl in the presence of 4-methylcatechol (4-MC), and the peptide is coupled to the nanoparticles through 4-MC via Mannich reaction. The c(RGDyK)-MC-Fe3O4 NPs have an overall diameter of approximately 8.4 nm and are stable in physiological conditions. When administrated intravenously, these c(RGDyK)-MC-Fe3O4 NPs accumulate preferentially in the integrin alphavbeta3-rich tumor area, which are readily tracked by MRI.     

A promising green method in cyclization reaction.Oxidation of 3-methylcatechol in the presence of 1,10-phenanthroline

Electrochemical oxidation of 3-methylcatechol as a model compound has been studied in the presence of 1,10-phenanthroline as a bi-dentate nucleophile in water/acetonitrile(70/30,v/v) solution using cyclic voltammetry and controlled-potential coulometry. The results revealed that anodically generated 3-methylcyclohexa-3,5-diene-1,2-dione participates in inter and intramolecular Michael addition reactions with 1,10-phenanthroline and via an ECEC pathway converts to the corresponding heterocyclic compound.The present work has led to the development of a facile and one-pot method with high atom economy under ambient conditions and in an undivided cell using a carbon electrode.     

Effect of AOT on enzymatic activity of the organic solvent resistant tyrosinase from Streptomyces sp. REN-21 in aqueous solutions and water-in-oil microemulsions

The effect of AOT (sodium-bis(2-ethylhexyl sulfosuccinate)) on enzymatic activity of the organic solvent resistant tyrosinase (OSRT) in aqueous phosphate buffer solutions and in water-in-oil microemulsions of the water/AOT/isooctane system has been investigated. In contrast to mushroom tyrosinase, AOT does not activate OSRT in aqueous solutions, altering its activity very little at concentrations lower than 2 mM. Increasing contents of AOT in isooctane reduce the observed initial reaction rates of oxidation of t-butylcatechol (tBC) and 4-methylcatechol (4-MC). Similarly to mushroom tyrosinase, the effect has been described using an equation based on preferential binding of the substrates by surfactant interface layers. The apparent Michaelis-Menten substrate binding constants increase linearly with AOT concentration (with slopes of 0.12+/-0.02 and 0.051+/-0.006 for tBC and 4-MC, respectively), and the effective enzyme turnover number in the microemulsions remains practically constant.     

KI-catalysed synthesis of 4-methylcatechol dimethylacetate and fragrant compound Calone 1951®

Synthesis of the fragrant compound Calone 1951® from 4-methyl catechol and methyl bromoacetate entails three successive reactions: the Williamson reaction, Dieckmann condensation, and hydrolysis-decarboxylation reaction. In this paper, the synthesis of 4-methylcatechol dimethylacetate (MCDA) via the Williamson reaction by adding KI as catalyst was investigated. It was found that the addition of an appropriate amount of KI can significantly increase the product yield due to generation of methyl iodoacetate via the reaction between KI and methyl bromoacetate. The synthesised MCDA as well as Calone 1951® were first characterised by melting points, HPLC, IR, and NMR analyses. Next, the effect of the key operating factors on MCDA synthesis by the Williamson reaction was investigated and the optimum operating conditions were obtained via a group of orthogonal experiments. The verification experiments demonstrated that, under the optimum operating conditions, the MCDA yield could be increased from 78.5 % to 95.4 % by the addition of an appropriate amount of KI; the corresponding yield of Calone 1951® increased to 68 %.     

Electrochemical oxidation of catechols in the presence of ketene N,O-acetals: indole formation versus α-arylation

Anodic oxidation of catechols has been investigated in the presence of ketene N,O-acetals using cyclic voltammetry and constant current electrolysis methods. The results show that in the presence of ketene N,O-acetals, the anodic oxidation of 4-methylcatechol affords α-arylated products in satisfactory yields. Meanwhile, indoles can be synthesized from simple 3-substituted catechols or catechol itself following an ECEC mechanism. In addition, either α-arylation or indole formation could be the dominant pathway by simply modifying the composition of the electrolyte solution.     

Characterisation by liquid chromatography coupled to electrospray ionisation ion trap mass spectrometry of phloroglucinol and 4-methylcatechol oxidation products to study the reactivity of epicatechin in an apple juice model system

The reactivity of the (-)-epicatechin structure towards caffeoylquinic acid o-quinones was studied in an apple juice model solution. The approach consisted in considering separately the reactivities of the two phenolic moieties of an (-)-epicatechin molecule: phloroglucinol and 4-methylcatechol were chosen to represent A- and B-rings, respectively. The oxidation products were characterised by RP-HPLC coupled with electrospray ionisation Mass spectrometry (MS). The reactivities of the A- and B-rings were clearly different on the basis of the oxidation products formed. Both A- and B-rings could be involved in covalent bond formation, but electron transfers only occurred with the B-ring. Most of the (-)-epicatechin oxidation products were linked by A/B-ring linkage ("head-to-tail" intermolecular coupling). After this first dimerisation step, intramolecular reactions seemed to be favoured. Therefore, the complexity of oxidation products in apple juice does not only result from an extensive polymerisation of native phenolic compounds, but also from a multiplicity of small molecules in different oxidation states and isomeric forms.     

Tyrosinase/laccase bienzyme biosensor for amperometric determination of phenolic compounds

Tyrosinase/laccase bienzyme biosensor for amperometric determination of phenolic compounds was constructed. Enzymes were immobilized in titania gel matrix. The obtained biosensor was successfully used for determination of 2,6-dimethoxyphenol, 4-tertbutylcatechol, 4-methylcatechol, 3-chlorophenol and catechol. The highest sensitivity and the widest linear range were noticed for catechol, 234 mA L mol^− 1 and 2.0 × 10^− 7–3.2 × 10^− 5 mol/L, respectively. Detection limit for catechol, at signal-to-noise ratio of 3 was 1.3 × 10^− 7 mol/L.     

Multistep Conversion of para-Substituted Phenols by Phenol Hydroxylase and 2,3-Dihydroxybiphenyl 1,2-Dioxygenase

A multistep conversion system of para-substituted phenols by recombinant phenol hydroxylase (PH_IND) and 2,3-dihydroxybiphenyl 1,2-dioxygenase (BphC_LA-4) was constructed in this study. Docking studies with different para-substituted phenols and corresponding catechols inside of the active site of PH_IND and BphC_LA-4 predicted that all the substrates should be transformed. High-performance liquid chromatography–mass spectrometry analysis showed that the products of multistep conversion were the corresponding para-substituted catechols and semialdehydes. For the first-step conversion, the formation rate of 4-fluorocatechol (0.39 μM/min/mg dry weight) by strain PH_IND hydroxylation was 1.15, 6.50, 3.00, and 1.18-fold higher than the formation of 4-chlorocatechol, 4-bromocatechol, 4-nitrocatechol, and 4-methylcatechol, respectively. For the second-step conversion, the formation rates of semialdehydes by strain BphC_LA-4 were as follows: 5-fluoro-HODA?>?5-chloro-HODA?>?2-hydroxy-5-nitro-ODA?>?5-bromo-HODA?>?2-hydroxy-5-methyl-ODA. The present study suggested that the multistep conversion by both ring hydroxylase and cleavage dioxygenase should be potential in the synthesis of industrial precursors and provide a novel avenue in the wastewater recycling treatment.     

Electrochemical study of catechol and some 3-substituted catechols in the presence of 4-hydroxy coumarin: application to the electro-organic synthesis of new coumestan derivatives

Electrochemical oxidation of catechol (1d), 3-methylcatechol (1a), 3-methoxycatechol (1b) and 2,3-dihydroxybenzoic acid (1c) in the presence of 4-hydroxycoumarin as nucleophile in aqueous solution has been studied using cyclic voltammetry and controlled-potential coulometry. The results indicate that (1a–1d) participating in a 1,4 (Michael) addition reaction convert to coumestan derivatives (5a–5d). The electrochemical synthesis of 5a–5d has been successfully performed in an undivided cell in good yield and purity.     

On the Adsorption of Some Catechol Derivatives from Aqueous Solutions onto Activated Carbon Cloth: Equilibrium and Kinetic Studies

The removal of some of pollutants including catechol, 3-methylcatechol, 3-methoxycatechol, and 2,3-dihydroxybenzoic acid by adsorption onto activated carbon cloth (ACC) at 35.0 ± 0.1°C was investigated. The equilibrium experimental data were fitted to Langmuir, Freundlich, Temkin, Langmuir-Freundlich, and Redlich-Peterson isotherms. Also the kinetic experimental data were fitted to the pseudo-first-order and pseudo-second-order kinetic models. It was found that the pseudo-second-order model describes the kinetic of adsorption better than the other one. By comparing the obtained results with the previously reported data, it can be concluded that ACC is a high efficient adsorbent for removal of phenolic compounds from aqueous solutions.     

Effects of aliphatic acids, furfural, and phenolic compounds on Debaryomyces hansenii CCMI 941

Debaryomyces hansenii is a polyol overproducing yeast that can have a potential use for upgrading lignocellulosic hydrolysates. Therefore, the establishment of its tolerance to metabolic inhibitors found in hydrolysates is of major interest. We studied the effects of selected aliphatic acids, phenolic compounds, and furfural. Acetic acid favored biomass production for concentrations <6.0 g/L. Formic acid was more toxic than acetic acid and induced xylitol accumulation (maximum yield of 0.21 g/g of xylose). All tested phenolics strongly decreased the specific growth rate. Increased toxicity was found for hydroquinone, syringaldehyde, and 4-methylcatechol and was correlated to the compound’s hydrophobicity. Increasing the amount of furfural led to longer lag phases and had a detrimental effect on specific growth rate and biomass productivity.     

Electrochemical oxidation of some catechol derivatives in the presence of some betadicetone derivatives: mechanistic and thermodynamic study

Electrochemical oxidations of 4-methylcatechol (1), 4-tert-butylcatechol (5) and catechol (7) in the presence of different nucleophiles have been investigated both experimentally and theoretically. Experimental results have been obtained by means of cyclic voltammetry and controlled-potential coulometry. Also the theoretical results were calculated at DFT (B3LYP) level of theory and 6–311+G (p, d) basis set. The calculated results indicate that oxidation potential of catechols (1, 5, 7) and their substituted species are directly dependent on the ?G _tot, and continuance of reactions during electrolysis is dependent on ?G _tot of produced species on the surface of electrode. The current study indicates that theoretical studies along with empirical research can be useful in displaying electrochemical reaction mechanisms.     

Electro-oxidation of catechols in the presence of benzenesulfinic acid. Application to electro-organic synthesis of new sulfone derivatives

The mechanism of electrochemical oxidation of catechol (1a), 3-methylcatechol (1b) and 3-methoxycatechol (1c) in the presence of benzenesulfinic acid (3) as a nucleophile has been studied in an aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the catechol derivatives (1a–1c) are converted to sulfone derivatives (4a–4c) through Michael addition of benzenesulfinate to anodically generated o-quinones (2a–2c). The electrochemical synthesis of 4a–4c has been successfully performed in an undivided cell in good yields and purity.     

C-N coupling of 3-methylcatechol with primary amines using native and recombinant laccases from Trametes versicolor and Pycnoporus cinnabarinus

Five laccase genes from Pycnoporus cinnabarinus and Trametes versicolor encoding for different isoenzymes have been cloned, recombinantly expressed and characterized. Following C-N coupling of primary linear, branched-chained and cyclic amines to 3-methylcatechol was mediated by native and recombinant laccases yielding the corresponding secondary amines. Formation of C5-monoaminated ortho-methylquinones occurred within 1-2 h; prolonged incubation led to the formation of high-molecular mass products. No difference between the use of native or recombinant isoenzymes from P. cinnabarinus or T. versicolor was observed. Optimization of the reaction conditions included variation of amine donor ratios, pH, amount and type of enzyme preparations. The formation of by-products could be suppressed at pH values corresponding to the enzymes optima (pH 4-5). A total of 10 secondary amines were synthesized with product formations of up to 80%. Furthermore, all purified secondary amines were characterized by NMR-, LC-MS- and HRMS-analysis and log P values were determined.     

Reaktionen von o-Chinonen mit Aminen und Proteinen. 4. Mitteilung. 7a-Methyl-5,6-dioxo-5,6,7,7a-tetrahydroindol-Derivate aus 4-Methylbrenzcatechin und Enaminen

Reactions of o-Quinones with Amines and Proteins. 7a-Methyl-5,6,7,7a-tetrahysroindole Derivatives from 4-Methylcatechol and Enamines Methyl l-[2′-(methoxycarbonyl)ethyl]-7a-methyl-5,6-dioxo-5.6.7,7a-tetrahydro-indole-3-carboxylate ( 1 ) was isolated after the oxidation of 4-methylcatechol with silver ( 1 ) oxide in the presence of b?-alanine methyl ester in glacial acetic acid. The formation of 1 requires in situ dehydrogenation of the b?-aminocarboxylate and addition of the resulting enamine to 4-methyl-1,2-benzoquinone. Reaction of ethyl 3-(phenylamino)crotonate with 4-methyl-1,2-benzoquinone afforded ethyl 2,7a-dimethyl-5,6-dioxo-1-phenyl-5,6,7,7a-tetrahydroindole-3-carboxylate ( 6 ). Despite the fact that the yields are low, the addition of enamines to o-quinones represents an interesting novel extension of the Nenitzescu-reaction which is well known in the p-quinone series. Compound 1 may be considered as a novel model for the crosslinking of proteins by o-quinones. Formation of 1 was, however, not observed under physiological conditions.     

Factors That Affect the Accumulation of Strecker Aldehydes in Standardized Wines: The Importance of pH in Oxidation

Strecker aldehydes (SA) can be formed in wine from the degradation of Strecker and, to a lesser degree, via the oxidation of higher alcohols. The objective of this article is to assess the magnitude of the differences introduced by wine compositional factors other than amino acids and Fe, in the accumulation of SA during oxidation. Eight red, two rosé and two white wines were oxidized. The accumulation of SA was analyzed. Whites and rosés presented negative accumulations for isobutyraldehyde, and in general, these wines accumulated smaller concentrations of the other SA than red wines. Only methional and phenylacetaldehyde were accumulated in all of the wines during oxidation. 2-methylbutanal and 3-methylbutanal were accumulated in 9 out of the 12 wines, whereas isobutyraldehyde was accumulated only in 5 out of the 12. 2-methylbutanal was, on average, the least accumulated aldehyde. Methional was the aldehyde formed most homogenously. Most of the observed differences can be attributed to three factors: the pH, oxidation time and native levels of Strecker aldehydes. The influence of pH was particularly intense in the cases of phenylacetaldehyde and methional. An independent test using synthetic wines with Strecker amino acids and 4-methylcatechol with different pHs (4.2, 3.5 and 2.8) was carried out in order to verify the higher pH value, the greater accumulation in SA after oxidation process. The results strongly suggest the important role played by pH in the accumulation of SA in wine oxidation.