Surface modification of polymer latex particles by AGET ATRP of a styrene derivative bearing a lactose residue

Grafting of a styrene derivative bearing a lactose residue, i.e., N-2-4-(vinylbenzenesulfonamido)ethyl lactobionamide (VBSAELA), onto polymer latex particles was carried out in aqueous media by activator generated electron transfer atom transfer radical polymerization (AGET ATRP). The core polymer latex particles having α-chloroester groups as ATRP-initiating groups were prepared by miniemulsion polymerization of styrene and 2-chloropropionyloxyethyl methacrylate (CPEM) in the presence of a polymerizable surfactant, i.e., N,N-dimethyl-N-dodecyl-N-2-methacryloyloxyethylammonium bromide (C₁₂Br). AGET ATRP was initiated with tris[(2-pyridylmethyl)amine] copper (II) dichloride and l-ascorbic acid. Dynamic light scattering (DLS) revealed that the P(St-CPEM)-g-P(VBSAELA) particles possess graft layers of 10 nm in thickness on the core particles of 91 nm in diameter. Critical coagulation concentration measurement revealed that the dispersion stability of the particles in water increased due to hydrated P(VBSAELA) shell layers. Adsorption of bovine serum albumin (BSA) onto the particles was considerably suppressed by the hydrated shell layers.     

Macromolecular models for branched PVC. II. Reactivity of chlorine bound to a tertiary carbon atom in the copolymer vinyl chloride–isopropenyl chloride

The selectivity of the phenolysis reaction of a chlorine atom bound to a tertiary carbon Cl_T on a macromolecular model, i.e., the copolymer of vinyl chloride–isopropenyl chloride, was verified. The phenolysis reaction can be used as a chemical method to determine Cl_T in the copolymers. Phenolic polyelectrolytes are obtained as products. The increase of the Cl_T content leads to an appreciable decrease of the thermal stability of the polymer. The thermal decomposition by dehydrochlorination is a chain reaction. The γ and ultraviolet radiolysis processes did not reveal a remarkable influence of Cl_T; the samples with an increased Cl_T content showed a decreased stability towards sunlight. One concludes that when Cl_T is present in PVC it can initiate the decomposition reaction at lower temperatures than would be expected.     

Radical copolymerization of N-alkylmaleimides with isobutene and the properties of the resulting alternating copolymers

Radical copolymerization of N-methylmaleimide (MeMI) as well as other N-alkylmaleimides (RMI) and isobutene (IB) was carried out with 2,2′-azobis(isobutyronitrile) as an initiator at 60°C. The initial rate of the copolymerization (R_p) was dependent on the monomer composition and was maximum at the 40 mol % of MeMI in the feed. A solvent effect on the R_p and the monomer reactivity ratio was observed in this copolymerization system, i.e., copolymerization in chloroform produced a higher R_p and an alternating tendency compared with those in dioxane (r_MeMI = 0.14, r_1B = 0 in chloroform and r_MeMI = 0.47, r_1B = 0 in dioxane). The alternating copolymer of RMI and IB shows a high glass transition temperature (T_g) and excellent thermal stability, e.g., the T_g and the thermal decomposition temperature (T_d) were 152 and 363°C, respectively, for the alternating copolymer of MeMI and IB. Both the T_g and T_d increased as the concentration of the MeMI unit in the copolymers increased. Colorless transparent sheets were obtained from press molding the alternating copolymers. They showed excellent mechanical and optical properties. © 1996 John Wiley & Sons, Inc.     

Preparation and characterization of polystyrene (PS)/layered double hydroxides (LDHs) composite by a heterocoagulation method

Polystyrene (PS)/layered double hydroxides (LDHs) composites were prepared for the first time from LDHs aqueous suspension and PS emulsion by electrostatic assembly. The morphology characterization based on XRD and TEM showed that the LDHs were partially exfoliated in PS matrix. By using a reactive emulsifier, i.e., sodium 2-hydroxyl-3-(methacryloxy)propane-1-sulfonate (HMPS), which was able to copolymerize with styrene, a strong polymer-LDHs platelets interaction was achieved. The glass transition temperature (T _g ) of the composites was measured by DSC and DMA. The results showed that a strong polymer-LDHs platelets interaction played a dominant role in affecting the mobility of polymer chains, i.e., the T _g . With a strong interaction, PS-HMPS/LDHs composite showed a significant enhancement in T _g while a slight increase in T _g was observed for PS-SDS (PS prepared by emulsion polymerization using sodium dodecyl sulfate as emulsifier)/LDHs composite with a weak interaction. The addition of LDHs improved the thermal stability of PS, and the improvement depended on the dispersion of the LDHs platelets.     

Synthesis and UCST‐type phase behaviors of OEGylated random copolypeptides in alcoholic solvents

A series of OEGylated random copolypeptides with similar main‐chain lengths and different oligo(ethylene glycol) (OEG) molar content and chain lengths were prepared from triethylamine initiated ring‐opening polymerization (ROP) of OEGylated γ‐benzyl‐_L‐glutamic acid based N‐carboxyanhydride (OEG_mBLG–NCA, m = 2, 3) and γ‐benzyl‐_L‐glutamic acid based N‐carboxyanhydride (BLG–NCA). ¹H NMR analysis verified copolypeptides structures and determined the OEG molar content (x). FTIR analysis further confirmed the molecular structures, indicated α‐helical conformations of copolypeptides in the solid‐state, and revealed H‐bonding interactions between OEG pendants and alcoholic solvents. The copolypeptides exhibited a reversible upper critical solution temperature (UCST)‐type phase behavior in various alcoholic solvents (i.e., methanol, ethanol, 1‐propanol, 1‐butanol, and 1‐pentanol) depending on the x values and OEG side‐chain lengths (m). Variable‐temperature UV–vis analysis revealed that the UCST‐type transition temperatures (T_pts) of the copolypeptides in alcohols decreased as x or m value increased or as polymer concentration decreased. T_pts of copolypeptides with high x values (x ≥ 0.50) increased as the number of methylene of the alcoholic solvent increased from 3 (i.e., 1‐propanol) to 5 (i.e., 1‐pentanol). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3444–3453     

Rendering polyureas melt processible

Because of the presence of extensive H‐bonding in the hard segments, polyureas are processed by solution techniques (e.g., dry spinning) by the use of relatively costly and environmentally unfriendly solvents. Thus, the objective of this research was to render polyureas melt processible, (i.e., to reduce their flow temperature, T_flow) without compromising their excellent mechanical properties. We hypothesized and herein demonstrate that by using conventional chain extenders (CEs) in combination with small amounts of H‐bond acceptor chain extenders (HACEs), the T_flow of polyureas can be significantly reduced from ～230 to ～180 °C, and thus melt processible products with excellent mechanical properties can be obtained. We document the synthesis of conventional polytetramethylene oxide‐based and novel polyisobutylene (PIB)‐based polyureas with T_flows ～ 180 °C and excellent mechanicals by the addition of few percents of commercially available HACEs. Products were characterized by various techniques, including Instron (tensile strengths, elongations), durometer (Shore A Hardness), dynamic mechanical thermal analysis (T_flow), and thermal gravimetric analysis (TGA) (thermal weight loss). According to TGA, a polyurea with T_flow of ～180 °C did not degrade up to ～234 °C in air. A micromorphology for melt processible polyureas is proposed that emphasizes flexibilized hard segments in the presence of HACEs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thermal properties of post-consumer PET processed in presence of phosphites

Thermal properties of recycled triphenylphosphite (TPP) chain extended poly(ethylene terephthalate) (PET) was investigated. As the TPP concentration increases, both reaction residues and molecular mass increase affecting significantly the thermal properties and crystallization behavior of the material. The presence of TPP residues did not affect the crystalline melt temperature (T _m), but modified the glass transition temperature (T _g), the crystallization temperature on heating (T _hc) and the crystallization temperature on cooling (T _cc). In the samples submitted to extraction with acetone, the properties were influenced by molecular mass changes, probably due to the presence of some insoluble reaction residue. The thermal stability of the sample purified by extraction after chain extension was comparable to that of the non-extended sample when heating was carried out under nitrogen atmosphere.This revised version was published online in November 2005 with corrections to the Cover Date.     

Reaction of polyamine polymer with molecular iodine via charge-transfer complex formation

The reaction of a Mannich base type-polyamine polymer with iodine (I₂) was studied kinetically and thermodynamically in order to clarify the polymer effects in the formation of triiodide ions (I₃^?). N,N-Dimethyl-p-(4-methylpiperazinomethyl) aniline and 1,4-dimethylpiperazine were used as low molecular weight donor model compounds. Triiodide ions are produced from the polyamine–I₂ system immediately after mixing the two-component solutions, while in the systems with I₂ and N,N-dimethyl-p-(4-methyl-piperazinomethyl)aniline and 1,4-dimethylpiperazine they are obtained only when relatively high concentrations of both donor and acceptor solutions were mixed. This is explained by the entropic contributions of the polymer chain such as the stacking effect of donor nitrogen atoms, i.e., the increment of local donor concentration around I₂ in the reaction field. The relation between the solution behavior of the reaction systems and the rate of formation of I₃^? ions also supports this kind of polymer effect. The effects of neighboring groups and dielectric constant on the reaction are also discussed.     

Synthesis and UCST‐type phase behavior of polypeptide with alkyl side‐chains in alcohol or ethanol/water solvent mixtures

A series of thermoresponsive polypeptides bearing 1‐butyl, 1‐hexyl, or 1‐dodecyl side‐chains (i.e., 6a ‐ 6c ) were synthesized by copper‐mediated 1,3‐dipolar cycloaddition with high grafting efficiency (>95%) between side‐chain “clickable” polypeptide, namely poly(γ‐4‐(propargoxycarbonyl)benzyl‐_L‐glutamate) ( 5 ) and 1‐azidoalkanes. 5 with different degree of polymerization (DP = 48–86) were prepared from triethylamine initiated ring‐opening polymerization of γ‐4‐(propargoxycarbonyl)benzyl‐_L‐glutamic acid based N‐carboxyanhydride ( 4 ). ¹H NMR, FTIR, and GPC results revealed the successful preparation of the resulting polypeptides. 6a ‐ 6c showed reversible UCST‐type phase behaviors in methanol, ethanol, and ethanol/water solvent mixtures depending on the polymer main‐chain length, alkyl side‐chain length, weight percentage of ethanol (f_w) in the binary solvent, and so forth. FTIR analysis revealed the presence of the van der Waals interaction between the alkyl pendants of polypeptides and alkyl groups of alcoholic solvents. Variable‐temperature UV‐vis spectroscopy revealed that the UCST‐type phase transition temperature (T_pt) increased as polymer main‐chain length or concentration increased. In ethanol/water solvent mixtures, polypeptide with short alkyl pendant (i.e., 1‐butyl group) and short main‐chain length (DP = 41) showed the widest f_w range and T_pts in the range of 61.0–71.1 °C. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3425–3435     

Molecular Weight Development in Free‐Radical Polymerization with Polyfunctional Chain‐Transfer Agents, 1. Equal Reactivity Model

The analytic expression for the weight‐average molecular weight development in free‐radical polymerization that involves a polyfunctional chain‐transfer agent is proposed. Free‐radical polymerization is kinetically controlled; therefore, the probability of chain connection with a polyfunctional chain‐transfer agent as well as the primary chain‐length distribution changes during the course of polymerization. We consider the primary chains formed at different times as different types of chains, and the heterochain branching model is used to obtain the weight‐average chain length at a given conversion level in a matrix formula, described as P_w = W { D _w + ( I + T ) SP ( I – TSP )^–1 D_f }. Because the primary chains are formed consecutively, the number of chain types N is extrapolated to infinity, but such extrapolation can be conducted with the calculated values for only three different N values. The criterion for the onset of gelation is simply described as a point at which the largest eigenvalue of the product of matrixes, TSP reaches unity, i. e., det  ( I – TSP ) = 0. The present model can readily be extended for the star‐shaped polyfunctional initiators, and the relationships between the model parameters and kinetic rate expression for such reaction systems are also shown.     

Poly(arylene ether)s,poly(arylene thioether)s,and poly(arylene sulfone)s derived from a dihydroxy(imidoarylene) monomer

Novel poly(arylene ether)s, poly(arylene thioether)s, and poly(arylene sulfone)s were synthesized from the dihydroxy(imidoarylene) monomer 1 . The syntheses of poly(arylene ether)s were carried out in DMAc in the presence of anhydrous K₂CO₃ by a nucleophilic substitution reaction between the bisphenol and activated difluoro compounds. Poly(arylene thioether)s were synthesized according to the recently discovered one-pot polymerization reaction between a bis(N,N′-dimethyl-S-carbamate) and activated difluoro compounds in the presence of a mixture of Cs₂CO₃ and CaCO₃. The bis(N,N′-dimethyl-S-carbamate) 3 was synthesized by the thermal rearrangement reaction of bis(N,N′-dimethylthiocarbamate) 2 , which was synthesized from 1 by a phase-transfer catalyzed reaction. The poly(arylene thioether)s were further oxidized to form poly(arylene sulfone)s, which would be very difficult, if not impossible, to synthesize by other methods. All of the polymers described have extremely high T_gs and thermal stability as determined from DSC and TGA analysis. Poly(arylene sulfone)s have the highest T_gs and they are in the range of 298–361°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1201–1208, 1998     

Influence of the polymer structure on the achievement of polar orientation in high glass transition temperature nonlinear optical polyimides by photo-assisted poling

We have used combinations of light, heat, and electrostatic fields to investigate the orientation of nonlinear azo-chromophores chemically incorporated into high glass transition temperature (T_g) polyimides. A number of nonlinear optical polyimides have been synthesized in which the interaction between the nonlinear optical chromophore and the polymer main chain was systematically altered to determine to what extent this steric interaction influences the orientation of the nonlinear chromophore. Chromophores in polymers may be oriented by a number of methods: (a) polarized light at room temperature (i.e., photo-induced orientation or PIO), (b) polarized light and electric fields (i.e., photo-assisted poling or PAP) at temperatures ranging from room temperature to the polymer T_g, and (c) electric fields at T_g (thermal poling). While thermal poling and PIO are usually possible, PAP depends strongly on the molecular structure of the polymer. Previously we have shown that PIO can be accomplished at room temperature in a system where the nonlinear chromophore is embedded into the polyimide main chain via the donor substituent, and this orientation can only be thermally erased at temperatures approaching T_g. In this article we show that, whereas photoisomerization can efficiently depole donor-embedded polyimides in a matter of few minutes at room temperature, PAP does not induce any polar order. This behavior is in marked contrast to a structurally related, side-chain, nonlinear polyimide, in which the azo chromophore is tethered via a flexible linkage to the polymer backbone. In this case some PAP occurs even at room temperature, while no PAP is observed for a donor-embedded system with a similar T_g. We suggest that the orientation during PAP below T_g in the side-chain polyimide is primarily due to the movement of the azo side chains, and there is a very little coupling of this motion to the main chain. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1669–1677, 1998     

A comparative study of the effects of decomposition rate control and mechanical grinding on the thermal decomposition of aluminum hydroxide

Summary Two different processes of the thermal decomposition of synthetic bayerite, i.e., the non-isothermal decomposition of mechanically ground sample in flowing N₂ and the controlled rate thermal decomposition of crystalline bayerite under vacuum, were investigated comparatively. In comparison with the conventional non-isothermal decomposition of crystalline bayerite in flowing N₂, the reaction temperature of the thermal decomposition was lowered by the individual effects of mechanical grinding of the sample and the reaction rate control. These decomposition processes indicated similar behavior characterized by the restricted changes of the specific surface area during the course of decomposition reaction and the formation of an amorphous alumina as the decomposition product. Different thermal behaviors were observed for those amorphous Al₂O₃ produced by the respective decomposition processes.     

Reversible Addition Fragmentation Chain Transfer Polymerization of Isobutyl Methacrylate

Abstract

The reversible addition fragmentation chain transfer (RAFT) bulk polymerization of isobutyl methacrylate (i‐BMA) has been studied using 2‐cyanoprop‐2‐yl dithionaphthalate (CPDN) as RAFT agent in the presence of 2,2′‐azobisisobutyronitrile (AIBN). The results of polymerizations of i‐BMA show that i‐BMA can polymerize in a controlled way by RAFT polymerization using CPDN as RAFT agent; i.e., the polymerization rate is first order with respect to monomer concentration, molecular weight increases linearly with monomer conversion, and polydispersities are relatively low (PDI?<?1.2). The structure of the polymer was characterized by ¹H‐NMR. A chain‐extension experiment of the resulting polymer was successfully carried out. The influences of [i‐BMA]₀/[CPDN]₀/[AIBN]₀ molar ratio and reaction temperature were investigated.     

Synthesis and characterization of multifunctional polymers via atom transfer radical polymerization of N‐(ω′‐alkylcarbazolyl) methacrylates initiated by Ru(II) polypyridyl chromophores

A series of poly(N‐(ω′‐alkylcarbazoly) methacrylates) tris(bipyridine) Ru‐centered bifunctional polymers with good filming, thermal, and solubility properties were synthesized and characterized. Atom transfer radical polymerization (ATRP) of N‐(ω′‐alkylcarbazoly) methacrylates in solution was used, where Ru complexes with one and three initiating sites acted as metalloinitiators with NiBr₂(PPh₃)₂ as a catalyst. ATRP reaction conditions with respect to polymer molecular weights and polydispersity indices (PDI) of the target bifunctional polymers were examined. Electronic absorption and emission spectra of the resultant functional polymers provided evidence of chromophore presence within a single polymeric chain. The thermal properties of all polymers were also investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), and these analyses have indicated that these polymers possess higher thermal stabilities than poly(methyl methacrylate) (PMMA) obtained via free radical polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6057–6072, 2005     

Continuous and gradual photo-activation methods: influence on degree of conversion and crosslink density of composite resins

Thermal properties and degree of conversion (DC%) of two composite resins (microhybrid and nanocomposite) and two photo-activation methods (continuous and gradual) displayed by the light-emitting diode (LED) light-curing units (LCUs) were investigated in this study. Differential scanning calorimetry (DSC) thermal analysis technique was used to investigate the glass transition temperature (T _g) and degradation temperature. The DC% was determined by Fourier transform infrared spectroscopy (FT-IR). The results showed that the microhybrid composite resin presented the highest T _g and degradation temperature values, i.e., the best thermal stability. Gradual photo-activation methods showed higher or similar T _g and degradation temperature values when compared to continuous method. The Elipar Freelight 2^TM LCU showed the lowest T _g values. With respect to the DC%, the photo-activation method did not influence the final conversion of composite resins. However, Elipar Freelight 2^TM LCU and microhybrid resin showed the lowest DC% values. Thus, the presented results suggest that gradual method photo-activation with LED LCUs provides adequate degree of conversion without promoting changes in the polymer chain of composite resins. However, the thermal properties and final conversion of composite resins can be influenced by the kind of composite resin and LCU.     

Synthesis and DSC study of model hard segments from diphenyl methane diisocyanate and butane diol

Model hard segments having different chain length and chain terminating groups, such as methyl, ethyl, octyl, and octadecyl, have been synthesized from diphenyl-methane diisocyanate (MDI) and butanediol and studied by DSC. In the case of short chain ends (i.e., methyl, ethyl, and octyl), hard segments having up to three MDI units show an increase of melting temperature T_m, while those with octadecyl chain end have T_m increase continuously with the number of MDI units. Enthalpy and entropy decrease with the augmentation of the hard-segment length. Side groups on the chain ends have a great influence on the melting properties.     

Initiation and termination mechanism in the cooligomerization of the styrene–methyl methacrylate–carbon tetrachloride system

The analysis of the endgroups of the oligomers produced in the styrene (A)–CCl₄(S) system (system I), the methyl methacrylate(B)–CCl₄ system (system II), and the styrene–methyl methacrylate–CCl₄ system (system III) was carried out in order to clarify the mechanism of the initiation, transfer, and termination. In system I, the number of Cl atoms per oligomer molecule N_Cl increases with the molar ratio of [S]/[A] when the molar ratio of [S]/[A] is below unity and is about four when the molar ratio of [S]/[A] is above unity, and the number of initiator fragments per oligomer molecule N_I decreases with the increase in the molar ratio of [S]/[A]. In system II, N_Cl is about 0.45 over a considerably wide range of the molar ratio of [S]/[B]. In system III, N_Cl increases and N_I decreases with the increase in the molar ratios of [S]/([A] + [B]) and [A]/[B]. From the data of N_Cl and N_I, the fraction I_CC14 of the initiation by the tri-chloromethyl radical in the overall initiation reactions and the fraction T_CC14 of the chain transfer reaction of the growing radical of styrene in all the reactions which produce the cooligomer in the system III were calculated. I_CCl3 and T_CC14 both increase with the molar ratios [S]/([A] + [B]) and [A]/[B].     

Organophotocatalyzed Synthesis of Vinyl-SCF3 and Benzoyl-SCF3 Using a New N-(SCF3)(CF3)-Shelf-Stable Reagent

We report the photocatalyzed C−SCF₃ bond formation using a new shelf-stable PhPh-N-(SCF₃)(CF₃) reagent I in combination with 4CzIPN as organophotocatalyst under blue LED irradiation. While the synthesis of vinyl-SCF₃ is performed in the presence of bromide salts as an activator of reagent I , the synthesis of trifluoromethylthioesters was undertaken using aldehydes as starting material in the presence of a hydrogen atom transfer catalyst (HAT). Preliminary mechanistic investigations including EPR spectroscopy and cyclic voltammetry analysis shed the light on the reaction mechanisms.     

Activation energy for thermal decomposition of nitric oxide

Variation of the reaction mechanism for homogeneous thermal decomposition of NO into N₂ and O₂ in the temperature range between 1000 and 4000 K is studied. The decomposition always proceeds through an atomic chain mechanism initiated by formation of oxygen atom. However the step of the oxygen atom initiation depends on the reaction condition, i.e., collision between two NO molecules at low conversions (when P_O2/P_NO ratio≪ ≪ 1) and collision between NO and O₂ and/or unimolecular decomposition of O₂ at high conversions (after substantial O₂ has been accumulated from the reaction). In this study, apparent activation energy (E_app) of the decomposition reaction has been theoretically determined on the basis of our proposed mechanisms. The E_app thus determined varies widely (from 254 to 401 kJ mol⁻¹) with the accepted step of initiation. This variation can account for the variations among experimental activation energies for the decomposition reaction in the literature. © 1996 John Wiley & Sons, Inc.