Kinetics of the gas-phase thermal elimination of N-alkyl-pyrazoles

The kinetic study of the gas-phase thermal elimination reactions of N-ethyl-3,5 dimethyl-pyrazole (I), N-ethyl-pyrazole (II), N-sec-butyl-pyrazole (III), and N-tert-butyl-pyrazole (IV) using a flow system is reported. After obtaining activation parameters for I we carried out competitive reactions with II, III and IV using I as internal standard to obtain their E_a. The values of Δ(ΔH) calculated for II, III and IV agree with the little differences in E_a experimentally found.     

Preparation of maleopimar adducts of polyfluoroalkyl esters of tall colophony

Maleopimar adducts of tall colophony esters with alcohols-telomers 1H,1H,5H-perfluoropentane-1-ol, 1H,1H,7H-perfluoroheptane-1-ol, and 1H,1H,9H-perfluorononane-1-ol were synthesized in conditions of Diels-Alder reaction.     

Estimation of the lattice heat capacity of rare-earth compounds

On the basis of the experimental data reported in literature, the contributions of cation mass (m) and molar volume (V) to lattice heat capacity (C) were analyzed. The volumetric-mass formula, C_x=(l —f)·C₁+f·C₂+C_m·(m_x — m_x′), was presented for estimating the heat capacities of rare-earth compounds. In the formula C₁ and C₂ represent the lattice heat capacities of two reference substances respectively, f = V_x—V₁/V₂—V₁ and C_m represents the lattice heat capacity variation with the variation 1 g of cation mass. The equation relating the C_m with temperatures was derived as follows: C_m = 0.084 e ?0.0074T ?0.27 e ?0.045T, and m_x and m_x′ (= (1 - f) m₁₊f m₂) represent the practical and “assumed” cation masses of the substance in question respectively.     

The spread of unicyclic graphs with given size of maximum matchings

The spread s(G) of a graph G is defined as s(G) = max _i,j |λ _i − λ _j |, where the maximum is taken over all pairs of eigenvalues of G. Let U(n,k) denote the set of all unicyclic graphs on n vertices with a maximum matching of cardinality k, and U ^*(n,k) the set of triangle-free graphs in U(n,k). In this paper, we determine the graphs with the largest and second largest spectral radius in U ^*(n,k), and the graph with the largest spread in U(n,k).      

Synthetic transformations of methylenelactones of eudesmanic type. Behavior of isoalantolactone under the conitions of heck reaction

By Heck reaction of isoalantolactone with aryl bromides or aryl iodides (3aR,4aS, 8aR,9aR,E)-3-arylmethylidene-8a-methyl-5-methylidenedecahydronaphtho[2,3-b]furan-2(3H)-ones and (4aS,8aR,9aS)-3-arylmethyl-8a-methyl-5-methylidene-4a,5,6,7,8,8a,9,9a-octahydronaphtho[2,3-b]furan-2(4H)-ones, products of the double bond shift, were synthesized. The yields of the arylation products depend on the nature of the catalytic system and on the structure of the aryl halide. The structures of (3aR,4aS,8aR,9aR,E)-3-(3,4-dimethoxybenzylidene)-8amethyl-5-methylidenedecahydronaphtho[2,3-b]furan-2(3H)-one and (4aS,8aR,9aS)-3-(2-methylsulfanylbenzyl)-8amethyl-5-methylidene-4a,5,6,7,8,8a,9,9a-octahydronaphtho[2,3-b]furan-2(4H)-one were proved by XRD analysis.     

Approximation of any physicochemical constants of homologues with the use of recurrect functions

Dependencies of various physicochemical constants of organic compounds (A) versus number of carbon atoms in the molecule within different homologous series [A = f(n _C )] usually are non-linear. The simplest recurrent equation A(n + 1) = a A(n) + b, connecting A-values for homologues (n + 1 carbon atoms) with the values of the same constants for previous members of series (n carbon atoms), indicates practically “ideal” linear character for most properties of organic compounds. It is the reasonable basis for approximation (or extrapolation) any physicochemical constants within any homologous series using the standard approach without special selection of appropriate algebraic functions. Principal mathematical properties of the function A(n + 1) = aA(n) + b and some of its chemical applications are considered.     

Construction of characteristic polynomial of reciprocal graphs from the number of pendant vertices

A method for construction of the characteristic polynomial (CP) coefficients of the three classes of reciprocal graphs, viz., L_n + n(p), C_n + n(p), and K_1,n?1 + n(p), has been developed that requires only the value of n. The working formulas have been expressed in matrix product form, computer programs for which can easily be developed. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Enumeration of the isomers of phenylenes

Summary The [h]phenylene C_6h H_2h+4 isomers are enumerated up toh=12. The numbers are compared with old and new data for C _n H₅ isomers of benzenoids, fluoranthenoids and biphenylenoids.

---

Anzahl möglicher Isomerer von Phenylenen

Zusammenfassung Die Anzahl der [h]Phenylen-Isomeren C_6h H_2h+4 wurde bish=12 ausgewertet. Die Zahlen wurden mit alten und neuen Daten für C _n H _s -Isomere von Benzenoiden, Fluoranthenoiden und Biphenyloiden verglichen.

     

Analysis of the melt viscosity and glass transition of polystyrene

The melt viscosity, the glass transition, and the effect of pressure on these are analyzed for polystyrene on the basis of the Tammann-Hesse viscosity equation: log η = log A + B/(T ? T₀). Evidence that the glass transition is an isoviscosity state (log η_g ? 13) for lower molecular weight fractions (M < M_c) is reviewed. For a polystyrene fraction of intermediate molecular weight (M ? 19,000; t_g = 89°C.), it is shown that B is independent of the p–v–T state of the polymer liquid and that dT₀/dP = dT_g/dP. This is consistent with the postulate that B is determined by the internal barriers to rotation in the isolated polymer chain. Relationships are derived for flow “activation energies” at constant pressure and at constant volume, and for the “activation volume.” Values for polystyrene along the zero-pressure isobar and along the constant viscosity, glasstransition line are reported. For the latter, ΔV_g* is constant and corresponds to about 10 styrene units. The “free volume” viscosity equation: log η = log A + b/2.3?, is reexamined. For polystyrene and polyisobutylene, ?_g/b = 0.03, but ?_g and b themselves differ appreciably in these polymers. The parameter b is the product of an equilibrium term Δα and the kinetic term B, and none of these is a “universal” constant for different polymers. The physical significance of the free volume parameter ?, particularly with regard to the “excess” liquid volume, remains undefined. Two new relationships for dT_g/dP, one an exact derivation and the other an empirical correlation, are presented.     

Chemical composition and antibacterial activity of methanolic extract and essential oil of Iranian Teucrium polium against some of phytobacteria

The antibacterial activity of essential oil and methanolic extract of Teucrium polium was determined against Pseudomonas aeruginosa, Pantoea agglomerans, Brenneria nigrifluens, Rhizobium radiobacter, Rhizobium vitis, Streptomyces scabies, Ralstonia solanacearum, Xanthomonas campestris and Pectobacterium cartovorum by disc diffusion method. Minimum inhibitory concentration and minimum bactericidal concentration were determined by using the serial dilution method. Chemical composition of essential oil and methanolic extract was determined by GC-MS and HPLC. α-Pinene (25.769%) and myrcene (12.507) were of the highest percentage in T. polium essential oil, and sinapic acid (15.553 mg/g) and eugenol (6.805 mg/g) were the major compounds in the methanolic extract. Our results indicate that both methanolic extract and essential oil did not show antibacterial activity against P. aeruginosa. Also the essential oil did not show antibacterial activity against P. cartovorum. In general, both methanolic extract and essential oil showed the same antibacterial activity against R. solanacearum, P. agglomerans, B. nigrifluens and S. scabies.     

Graphical representation of the state of orientation of polymer systems

The orientation distribution function for noncrystalline structural units in polymer systems cannot be determined completely from any experimental source; only the second and/or fourth moments of the distribution function, i.e., the second and/or fourth orders of the generalized orientation factors F_lm^j, can be evaluated. It is there-fore necessary to estimate the distribution function from F_2m^j and F_4m^j. In this paper, a graphical representation of the state of orientation is first discussed in terms of plots of F₄₀^j against F₂₀^j for several types of distribution functions for uniaxial orientation. These are three types of extreme concentration of the distribution at particular polar angles θ₀ given by θ₀ = 0, 0<θ₀<π/2, and θ₀ = π/2; five types of rather realistic distributions having single maxima at θ_j = 0, θ₀, π/2 and double maxima at θ_j = 0, π/2, and a single minimum at θ_j = θ₀; and four types of more realistic distributions including Kratky's floating rod model in an affine matrix. Second, estimation of the distribution function for uniaxial orientation from F₄₀^j and F₂₀^j is discussed quantitatively in terms of the mean-square error by three approximation methods: (a) expansion of the distribution function in finite series of spherical harmonics through the fourth order, (b) approximation of the distribution function as a composite of two components, random orientation and a particular orientation distribution given by N_a (cos²θ_j)^a, N_a being a constant, and (c) approximation of the distribution function by N_a (cos²θ_j)^a alone. It is concluded that when the orientation distribution is sharp, estimation by the second method of approximation gives a smaller error than the first.     

Synthesis of Phenyl- and Benzyl-Substituted Pyrrolidines and of a Piperidine by Intramolecular C-Alkylation. Synthons for tricyclic skeletons

The construction of new or novelly functionalized annulated and bridged tricylic compounds by two consecutive C,C-bond formations (a and b in la , Scheme 1) is described. In a first step, chloroalkyl-substituted aminonitriles yielded pyrrolidines 8 , 15a , 15b , 23 , 25 and piperidine 18 by carbanionic ring closure (Schemes 5, 6, 7 and 8). Subsequent Friedel-Crafts cyclization transformed the β-aminonitriles 8 , 15a , 15b , and 18 either directly or via their carboxylic acid derivatives to the indeno [1, 2-c]pyrrole, 2, 5-methano-3-benzazocine, benz [f]isoindoline and 1, 4-ethano-2-benzazapine skeletons 11 , 16a , 16b and 21 , respectively (Schemes 5, 6 and 7). By classical ring expansion reactions the pyrrolo [3, 4-c]isoquinoline and benzopyrano-[3, 4-c]pyrrole skeletons 28 resp. 31 were obtained from 11 (Scheme 9).     

Chromatographic Evaluation of the Lipophilic Properties of Selected Pesticides

Monolinuron, chlortoluron, diuron, isoproturon, linuron, diflubenzuron, dimefuron, teflubenzuron, and lufenuron have been chromatographed on an RP-HPLC column and on RP-HPTLC plates with methanol–water in different volume proportions as mobile phases. The retention values log k, and R_M were extrapolated to zero methanol content. Chromatographic lipophilicities (log k_w, R_Mw, _o(HPLC), and _{o (TLC)}) were compared with measured (log P_exp) partition coefficients and with values (A log Ps, IA log P, C log P, log P_Kowin, and x log P) calculated by use of five different software products. The most significant correlations were found between the chromatographic lipophilicities and C log P values. Satisfactory linear correlation was also obtained between lipophilicity (log k_w, R_Mw) and the valence Gutman index (M).     

N-Glucosides of Aminobenzoic Acids and Aminophenols

N-o-, -m-, and -p-carboxyphenyl-D-glucosylamines and N-o-, -m-, and -p-hydroxyphenyl-D-glucosylamines were synthesized by reaction of D-glucose with o-, m-, and p-aminobenzoic acids and o-, m-, and p-aminophenols. It was demonstrated that both - and -anomers were formed by N-glycosylation of o-, m-, and p-aminobenzoic acids; only -anomers, by N-glycosylation of o-, m-, and p-aminophenols.     

Some aspects of the polymerization of N-vinylcarbazole by grignard reagents

The polymerization of N-vinylcarbazole (NVC) initiated by PhMgBr in benzene was studied at 32°C. R_p is second order with respect to PhMgBr concentration but increases with NVC concentration (up to 0.06 M) and falls thereafter. R_p and P _n are depressed by the addition of thiophene and water. Modifiers such as benzaldehyde, butanone, and ethylene glycol practically inhibit the polymerization. Carbon tetrachloride and carbon dioxide, when passed through the NVC solution first, enhance the R_p and P _n increases with increasing PhMgBr and NVC concentrations, respectively. R_p increases with temperature, but P _n shows a maxium at a certain temperature. A cationic mechanism has been proposed where the polymerization is initiated by RMg⁺ cations produced from the ionization of PhMgBr by the Ashby and Smith mechanism.     

Theory of polydisperse reacting polymer systems

The kinetics of irreversible reactions between polymer chains of different molecular weights are studied, with emphasis on the case of highly reactive end groups. We calculate the rate constant k(N, M) for reaction between chains of lengths N and M respectively, in dilute and semi-dilute solutions and in the melt. In all cases, k(N, M) is dominated by the shortest chain: the limit k(N) ≡ k(N, ∞) is well-defined and scales as if both chains were of length N. In dilute solutions k(N, M) obeys mean field theory, being proportional to the equilibrium reactive group contact probability. For melts and concentrated solutions, k(N, M) follows diffusion-controlled laws: k(N, M) ≈ (R/τ_N)ƒ(M/N) where R_N and τ_N are the coil size and relaxation time of the shortest chain N, and ƒ(M/N) is a cross-over function describing the approach to the asymptotic form k(N) for M/N ≫ 1. We calculate the leading contributions to this cross-over function, which has universal forms depending on the concentration regime. The implications of these results for high-conversion free-radical polymerization are discussed.     

Effect of length and number of interlinking molecules on the strength of adhesion

The fracture energy G of an adhesive bond appears to be a product of two terms: G = G_O [1 + f(R, T)], where G_O is the intrinsic (chemical) strength of the interface and f(R, T), usually much larger than unity, reflects energy dissipated within the adherends at a crack speed R and temperature T. Values of G_O have been determined for interlinked sheets of an SBR elastomer by measuring the peel strength at low rates and high temperatures, and in the swollen state, to minimize internal losses. Both the density ΔN and molecular length L of interlinking molecules were varied. G_O was found to increase in proportion to (ΔN)L^3/2, in accord with the molecular theory of Lake and Thomas. As the peel rate was raised and the test temperature lowered, G was considerably increased by internal dissipative processes, becoming as much as 1000 × G_O near the glass transition. The loss function f(R, T) was found to depend somewhat upon the strand length L, being about twice as large at intermediate peel rates when L was increased by 40%. It also depended on the density ΔN of interlinking molecules, being about twice as large at high peel rates when the density of interlinks was reduced by a factor of six. Thus, the loss function f(R, T) is greater when the interlinking molecules are few and long, and it is lower when they are many and short. However, it is mainly governed by two parameters: peel rate R and temperature difference (T − T_g), in accord with a viscoelastic loss mechanism. © 1996 John Wiley & Sons, Inc.     

Hydrostannylation of phosphaalkenes [1]

Hydrostannylation reactions of the phosphaalkenes 9,11, and 21 with the triorganotin hydrides 1 proceed by different routes. Whereas the trior-ganotin hydrides 1a,b undergo regioselective 1,2-addition to the P/C double bond of the P-aminophosphaalkene 9 to furnish the 2-stannylphosphanes 17a,b, the 1,2-addition products to the P-halophosphaalkenes 11 and 21 can only be postulated as the reactive intermediates 20 and 23, respectively. The reactions of 11 with 1a,b proceed with cleavage of the triorganotin halide via the diphosphene 15 to furnish the cyclophosphanes 18 and 19. On the other hand, the hydrostannylation reactions of the phosphaalkene 21 are not selective, and the 1,3-diphosphetane 22 is isolated as one of the reaction products. © 1998 John Wiley & Sons, Inc. Heteroatom Chem 9:453–460, 1998