Sind die ‚Lehrbuch-Anionen’︁ O2−, [CO3]2− und [SO4]2− Fiktionen?

Are the ‘Textbook Anions’ O^2?, [CO₃]^2?, and [SO₄]^2? Fictitious? Experimental second electron affinities are still unknown for the title anions. It will be shown by means of quantum chemical ab initio calculations that these dianions are unstable with respect to spontaneous ionization. They all must be designated as non-existent.     

Synthese und Kristallstrukturen von (Ph4P)4[Bi8I28], (nBu4N)[Bi2I7] und (Et3PhN)2[Bi3I11] – Iodobismutate mit isolierten bzw. polymeren Anionen

Synthesis and Crystal Structures of (Ph₄P)₄[Bi₈I₂₈], (ⁿBu₄N)[Bi₂I₇], and (Et₃PhN)₂[Bi₃I₁₁] – Bismuth Iodo Complexes with Isolated and Polymeric Anions Solutions of BiI₃ in methanol react with NaI and (ⁿBu₄N)(PF₆) or (Et₃NPh)(PF₆) to form anionic bismuth iodo complexes (ⁿBu₄N)[Bi₂I₇] 1 and (Et₃PhN)₂[Bi₃I₁₁] 2 . In 1 Bi₄I₁₆ units, and in 2 Bi₆I₂₄ units are linked by common I-atoms to onedimensional infinite chains. Reaction of BiI₃ with (Ph₄P)(PF₆) in methanol yields (Ph₄P)₄[Bi₈I₂₈] 3 . The anions of 1–3 consist of edge-sharing BiI₆ octahedra. (ⁿBu₄N)[Bi₂I₇] 1 : Space group I2/m (No. 13), a = 1 082.3(5), b = 2 597.1(13), c = 1 206.1(6) pm, β = 93.17(2)°, V = 3 385(3) · 10⁶ pm³; (Et₃PhN)₂[Bi₃I₁₁] 2 : Space group P1 (No. 2), a = 1 283.5(6), b = 1 345.9(7), c = 1 546.3(8) pm, α = 83.87(2), β = 74.24(2), γ = 68.26(2)°, V = 2 388(2) · 10⁶ pm³; (Ph₄P)₄[Bi₈I₂₈] 3 : Space group P1 (No. 2), a = 1 329.3(4), b = 1 337.0(4), c = 2 193.1(5) pm, α = 104.20(2), β = 99.73(2), γ = 100.44(2)°, V = 3 622(2) · 10⁶ pm³.     

Theoretical study on HBC− and HCB− anions using multiconfiguration second‐order perturbation theory

The HBC^? and HCB^? anions have been studied using the complete active space self‐consistent field, CASPT2, and DFT/B3LYP methods with the contracted atomic natural orbital (ANO) and cc‐pVTZ basis sets. The geometries of all stationary points along the potential energy surfaces were optimized at the CASSCF/ANO and B3LYP/cc‐pVTZ levels. The ground state of HBC^? is predicted to be X²? state, which is different from the previously published results. The CASPT2/ANO potential energy curves (PECs) of isomerization reactions were calculated as a function of HBC bond angle and the PECs also show the ²? state is the ground state of HBC^? anion. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

(PPh4)[(ReO2S2)CuI] und (NEt4)2[(ReOS3)Cu3Cl4]: Fixierung der bisher nicht isolierten Ionen [ReO2S2]− und [ReOS3]− durch Ausnutzung der Stabilität der CuS2(Re)- und Cu3S3(Re)-Fragmente

(PPh₄)[(ReO₂S₂)CuI] and (NEt₄)₂[ReOS₃)Cu₃Cl₄]: Fixation of the up to now not Isolated Ions [ReO₂S₂]^? and [ReOS₃]^? Utilizing the Stability of the CuS₂(Re) and Cu₃S₃(Re) Fragments (PPh₄)[(ReO₂S₂)CuI] ( 1 ) and (NEt₄)₂[ReOS₃)Cu₃Cl₄] ( 2 ) containing the up to now not isolated oxothioperrhenate ions [ReO₂S₂]^? and [ReOS₃]^? as ligands, have been prepared by the reaction of (NEt₄)[ReS₄] with PPh₃ and CuI in acetone in the presence of (PPh₄)I (( 1 )) or with CuCl in CH₂Cl₂ in the presence of (NEt₄)Cl (( 2 )), respectively. 1 and 2 have been characterized by X-ray structure analysis, elemental analysis and spectroscopic studies (IR, UV/Vis). The electronic spectra show bands which can approximately be assigned to interesting low-energy charge-transfer-transitions of the type d(Cu) → d(Re). For crystal data see Inhaltsübersicht.     

Die Reaktion von SeCl4 mit Übergangsmetalltetrachloriden. Synthese und Kristallstrukturen von (SeCl3)2MCl6 mit M = Zr,Hf, Mo,Re

The Reaction of SeCl₄ with Transition Metal Tetrachlorides. Synthesis and Crystal Structures of (SeCl₃)₂MCl₆ with M = Zr, Hf, Mo, Re The transition metal tetrachlorides ZrCl₄, HfCl₄ and MoCl₄ react with SeCl₄ in closed ampoules at temperatures of 140°C to (SeCl₃)₂MCl₆ (M = Zr, Hf, Mo) which are all isotypic and crystallize in the (SeCl₃)₂ReCl₆ structure type (orthorhombic, Fdd2, Z = 8, lattice constants for M = Zr: a = 1165.7(1)pm, b = 1287.2(2)pm, c = 2180.2(2)pm; for M = Hf: a = 1162.9(2)pm, b = 1285.0(2)pm, c = 2178.2(3)pm; for M = Mo: a = 1153.8(1)pm, b = 1267.7(1)pm, c = 2147.4(2)pm). The Cl^? ions form a hexagonal closest packing with one fourth of the octahedral holes filled by Se⁴⁺ and M⁴⁺ in an ordered way. The MCl₆ octahedra are regular, the SeCl₆ octahedra are distorted with 3 short and 3 long Se? Cl bonds (mean 215 pm and 287 pm). The structures can thus be regarded as built of SeCl₃⁺ and MCl₆^2? ions. Magnetic susceptibility measurements show for M = Zr the expected diamagnetic behavior, for M = Mo and Re paramagnetic behavior according to the Curie-Weiss law with magnetic moments of 2.5 B. M. for M = Mo and 3.7 B. M. for M = Re corresponding to 2 and 3 unpaired electrons respectivly.     

Metal‐ and Oxidant‐Free Alkenyl C−H/Aromatic C−H Cross‐Coupling Using Electrochemically Generated Iodosulfonium Ions

A three‐step transformation consisting of 1) addition of electrochemically generated iodosulfonium ions to vinylarenes to give (1‐aryl‐2‐iodoethoxy)sulfonium ions, 2) nucleophilic substitution by subsequently added aromatic compounds to give 1,1‐diaryl‐2‐iodoethane, and 3) elimination of HI with a base to give 1,1‐diarylethenes was developed. The transformation serves as a powerful metal‐ and chemical‐oxidant‐free method for alkenyl C?H/aromatic C?H cross‐coupling.     

1‐Oxa‐nido‐dodecaborate [OB11H12]− from the Controlled Oxidation of the closo‐Borates [B11H11]2− and [B12H12]2−

The closo‐dodecaborate [B₁₂H₁₂]^2? is degraded at room temperature by oxygen in an acidic aqueous solution in the course of several weeks to give B(OH)₃. The degradation is induced by Ag²⁺ ions, generated from Ag⁺ by the action of H₂S₂O₈. Oxa‐nido‐dodecaborate(1?) is an intermediate anion, that can be separated from the reaction mixture as [NBzlEt₃][OB₁₁H₁₂] after five days in a yield of 18 %. The action of FeCl₃ on the closo‐undecaborate [B₁₁H₁₁]^2? in an aqueous solution gives either [B₂₂H₂₂]^2? (by fusion) or nido‐B₁₁H₁₃(OH)^? (by protonation and hydration), depending on the concentration of FeCl₃. In acetonitrile, however, [B₁₁H₁₁]^2? is transformed into [OB₁₁H₁₂]^? by Fe³⁺ and oxygen. The radical anions [B₁₂H₁₂] ^{˙ ?} and [B₁₁H₁₁] ^{˙ ?} are assumed to be the primary products of the oxidation with the one‐electron oxidants Ag²⁺ and Fe³⁺, respectively. These radical anions are subsequently transformed into [OB₁₁H₁₂]^? by oxygen. The crystal structure analysis shows that the structure of [OB₁₁H₁₂]^? is derived from the hypothetical closo‐oxaborane OB₁₂H₁₂ by removal of the B3 vertex, leaving a non‐planar pentagonal aperture with a three‐coordinate O vertex, as predicted by NMR spectra and theory.     

Theoretical prediction on HBeN− and HNBe− anions using multiconfiguration second‐order perturbation theory

The HBeN^? and HNBe^? anions have been investigated for the first time using the CASSCF, CASPT2, and DFT/B3LYP methods with the contracted atomic natural orbital (ANO) and cc‐pVTZ basis sets. The geometries of all stationary points along the potential energy surfaces were optimized at the CASSCF/ANO and B3LYP/cc‐pVTZ levels. The ground and the first excited states of HBeN^? are predicted to be X²Π and A²Σ⁺ states, respectively. It was predicted that the ground state of HNBe^? is X²Σ⁺ state. The A²Π state of HNBe^? has unique imaginary frequency. A bend local minimum M1 was found along the 1²A″ potential energy surface and the A²Π state of HNBe^? should be the transition state of the isomerization reactions for M1 ? M1. The CASPT2/ANO potential energy curves of isomerization reactions were calculated as a function of HBeN bond angle. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Die inneren Schwingungen der Tetrahetero-Tetrahedran-Anionen Ge44, Sn44- und Pb44

The Internal Vibration of the Tetrahetero-Tetrahedrane Anions Ge₄^4?, Sn₄⁴-, and Pb₄⁴ The Frequencies of the internal vibrations ν₁ (A₁), ν₂(E), ν₃(T₂) of the tetrahetero-tetrahedrane an ions Ge₄⁴- and Sn₄⁴- are determined from the infrared and Raman spectra of K₇LiGe₈ and KSn, respectively. A comparison of the characteristic vibration of tetrahedrane anions X₄⁴- (X = Si, Ge, Sn)and the isoelectronic neutral tetrahedranes Y₄ of the neighbouring elements (Y = P, As, Sb) shows a rather constant ratio of the corresponding frequencies k = v^?(X₄⁴-) = 0,77. This allows for an estimate of v^?(Pb₄⁴-) from the known Bi₄data. In the inflated spectrum of KPb bands are observed in the predicted frequency range.     

Salze von Halogenophosphorsäuren XIX [1] Über die Bildung und den Nachweis stabiler Intermediate bei der Reaktion von Fluorid mit Phosphoroxidchlorid

Salts of Halogenophosphoric Acids. XIX Formation and Identification of Stable Intermediates on the Reaction of Fluoride with Phosphorus Oxychloride By reaction of POCl₃ with fluorides of tertiary amines in the presence of the free amines the oxo-fluorophosphates [F₂P(O? O? PF₅)]^?, [OPF₅]^2?, and [OPF₄]^? are formed as intermediates on the way to [PF₆]^?. The compounds were characterized by NMR spectroscopy.     

Synthesis of Carbazoles and Related Heterocycles from Sulfilimines by Intramolecular C−H Aminations

While direct nitrene insertions into C?H bonds have become an important tool for building C?N bonds in modern organic chemistry, the generation of nitrene intermediates always requires transition metals, high temperatures, ultraviolet or laser light. We report a mild synthesis of carbazoles and related building blocks through a visible light‐induced intramolecular C?H amination reaction. A striking advantage of this new method is the use of more reactive aryl sulfilimines instead of the corresponding hazardous azides. Different catalysts and divergent light sources were tested. The reaction scope is broad and the product yield is generally high. An efficient gram‐scale synthesis of Clausine C demonstrates the applicability and scalability of this new method.     

Rhodium(III)‐Catalyzed Redox‐Neutral Coupling of α‐Trifluoromethylacrylic Acid with Benzamides through Directed C−H Bond Cleavage

A rhodium(III)‐catalyzed redox‐neutral coupling of α‐trifluoromethylacrylic acid with bezamides proceeds smoothly accompanied by amide‐directed C?H bond cleavage to produce β‐[2‐(aminocarbonyl)phenyl]‐α‐trifluoromethylpropanoic acid derivatives. One of the products can be transformed to a trifluoromethyl substituted heterocyclic compound. In addition, the redox‐neutral coupling of α‐trifluoromethylacrylic acid with related aromatic substrates possessing a nitrogen‐containing directing group can also be conducted under similar conditions.     

Transition Metal Catalyzed Coupling Reactions under C−H Activation

C−C coupling by transition metal catalyzed C−H activation has developed into a diverse area of research. The applicable catalysts are manifold, and the variety of products obtained range from basic chemicals to pharmaceuticals and building blocks for carbon networks. One reaction, in which several C−C bonds are formed under C−H activation of a methyl group, is the conversion of ortho-iodoanisole according to Equation (1).     

C−H Coupling Reactions Directed by Sulfoxides: Teaching an Old Functional Group New Tricks

Sulfoxides are classical functional groups for directing the stoichiometric metalation and functionalization of C?H bonds. In recent times, sulfoxides have been given a new lease on life owing to the development of modern synthetic methods that have arisen because of their unique reactivity. They have recently been used in catalytic C?H activation proceeding via coordination of an internal sulfoxide to a metal or through the action of an external sulfoxide ligand. Furthermore, sulfoxides are able to capture nucleophiles and electrophiles to give sulfonium salts, which subsequently enable the formation of C?C bonds at the expense of C?H bonds. This Review summarizes a renaissance period in the application of sulfoxides arising from their versatility in directing C?H functionalization.     

Single and Twofold Metal‐ and Reagent‐Free Anodic C−C Cross‐Coupling of Phenols with Thiophenes

The first electrochemical dehydrogenative C−C cross‐coupling of thiophenes with phenols has been realized. This sustainable and very simple to perform anodic coupling reaction enables access to two classes of compounds of significant interest. The scope for electrochemical C−H‐activating cross‐coupling reactions was expanded to sulfur heterocycles. Previously, only various benzoid aromatic systems could be converted, while the application of heterocycles was not successful in the electrochemical C−H‐activating cross‐coupling reaction. Here, reagent‐ and metal‐free reaction conditions offer a sustainable electrochemical pathway that provides an attractive synthetic method to a broad variety of bi‐ and terarylic products based on thiophenes and phenols. This method is easy to conduct in an undivided cell, is scalable, and is inherently safe. The resulting products offer applications in electronic materials or as [OSO]²⁻ pincer‐type ligands.     

Shedding Light on the Diverse Reactivity of NacNacAl with N‐Heterocycles

The aluminum(I) compound NacNacAl (NacNac=[ArNC(Me)CHC(Me)NAr]^?, Ar=2,6‐iPr₂C₆H₃, 1 ) shows diverse and substrate‐controlled reactivity in reactions with N‐heterocycles. 4‐Dimethylaminopyridine (DMAP), a basic substrate in which the 4‐position is blocked, induces rearrangement of NacNacAl by shifting a hydrogen atom from the methyl group of the NacNac backbone to the aluminum center. In contrast, C?H activation of the methyl group of 4‐picoline takes place to produce a species with a reactive terminal methylene. Reaction of 1 with 3,5‐lutidine results in the first example of an uncatalyzed, room‐temperature cleavage of an sp² C?H bond (in the 4‐position) by an Al^I species. Another reactivity mode was observed for quinoline, which undergoes 2,2′‐coupling. Finally, the reaction of 1 with phthalazine produces the product of N?N bond cleavage.     

Palladium(II)‐Catalyzed ortho‐Arylation of Aromatic Alcohols with a Readily Attachable and Cleavable Molecular Scaffold

A palladium(II)‐catalyzed C?H arylation process of alcohols has been developed. The strategy utilizes a novel quinoline‐based hemiacetal scaffold that can direct the selective C?H bond functionalization. This reaction provides a useful method to construct biaryl compounds of benzyl alcohols in good to excellent yields. The new molecular scaffold can be readily attached, removed, and recovered.     

Lewis Acid Assisted Nickel‐Catalyzed Cross‐Coupling of Aryl Methyl Ethers by C−O Bond‐Cleaving Alkylation: Prevention of Undesired β‐Hydride Elimination

In the presence of trialkylaluminum reagents, diverse aryl methyl ethers can be transformed into valuable products by C?O bond‐cleaving alkylation, for the first time without the limiting β‐hydride elimination. This new nickel‐catalyzed dealkoxylative alkylation method enables powerful orthogonal synthetic strategies for the transformation of a variety of naturally occurring and easily accessible anisole derivatives. The directing and/or activating properties of aromatic methoxy groups are utilized first, before they are replaced by alkyl chains in a subsequent coupling process.     

Mild C−H/C−C Activation by Z‐Selective Cobalt Catalysis

Cationic cobalt complexes enable unprecedented cobalt‐catalyzed C?H/C?C functionalizations with unique selectivity features. The versatile cobalt catalyst proved broadly applicable, enabled efficient C?H/C?C cleavage at room temperature, and delivered Z‐alkenes with excellent diastereocontrol.