Binuclear ruthenium macrocycles formed via the weak-link approach

The "weak-link approach" for the synthesis of metallomacrocycles has been used to synthesize a series of novel Ru(II) macrocycles in high yield. RuCl2(PPh3)3 has been reacted with two different phosphino-alkyl-ether hemilabile ligands, 1,4-(PPh2(CH2)2O)2C6H4 and 1,4-(PPh2(CH2)2OCH2)2C6H4. The hemilabile bidentate ligand coordinates to Ru(II) centers through both the P and O atoms to form bimetallic "condensed intermediates". The weak Ru-O bonds have been selectively cleaved with CO, 1,2-diaminopropane, and pyridine to yield large open macrocycles. This is the first example of the weak-link approach employed to synthesize macrocycles with Ru, and metal centers in general that have more than four coordination sites.     

A meso-helical coordination polymer from achiral dinuclear [Cu2(H3CCN)2(micro-pydz)3][PF6]2 and 1,3-bis(diphenylphosphanyl)propane-synthesis and crystal structure of 1 to infinity Cu(mu-pydz)2][PF6 (pydz=pyridazine)

Reaction of achiral [Cu2(H3CCN)2(mu-pydz)3][PF6]2 (1) (pydz = pyridazine) with bidendate 1,3-bis(diphenylphosphanyl)propane (2) in acetonitrile at room temperature in a 1:1 ratio yielded the mononuclear copper(I) complex [Cu[CH2(CH2PPh2)2]2][PF6] (3) together with new one-dimensional coordination polymer 1 to infinity[[Cu(mu-pydz)2][PF6]] (4). Air-sensitive single crystals of 4, suitable for X-ray structure determination, were grown from a mixture of dichloromethane/ hexane [crystal system: monoclinic; space group: C2/c: a = 21.910(3), b = 12.130(2), c = 25.704(3) A,beta = 110.08(10) degrees, V = 6416.65(16) A3]. The one-dimensional coordination polymer 1 to infinity[[Cu(mu-pydz)2][PF6]] (4) exhibits as outstanding feature the rare structure of a meso-helix.     

C-H and P-C(Ph) activation competitive processes caused by interaction with the solvate [cis-Pt(C6F5)2(thf)2

The study of the reaction between the ethylene [Pt(eta-H2C = CH2)(PPh3)2] or alkyne [Pt(eta2-HC [triple bond] CR)(PPh3)2] (R = SiMe3 1, Bu(t) 2) complexes with [cis-Pt(C6F5)2(thf)2] (thf = tetrahydrofuran) has enabled us to observe the existence of competitive processes between the activation of a P-C(Ph) bond on the PPh3 ligand, to give the binuclear derivative [cis-(C6F5)2Pt(mu-Ph)(mu-PPh2)Pt(PPh3)] 3, and the activation of a C-H bond of the unsaturated group, to give the corresponding (mu-hydride)(mu-vinyl) [cis, cis-(PPh3)2Pt(mu-H)(mu-1kappaC(alpha):eta2-CH = CH2)Pt(C6F5)2] 4 or (mu-hydride)(mu-alkynyl) [cis,cis-(PPh3)2Pt(mu-H)(mu-1kappaC(alpha):eta2-C [triple bond]CR)Pt(C6F5)2] (R = SiMe3 5, Bu(t) 6) compounds, respectively. The monitoring of these reactions by NMR spectroscopy has allowed us to detect several intermediates, and to propose a mechanism for the C-H bond activation. In addition, the structures of the (muo-hydride)(mu-alkynyl) complex 5 and the unprecedented (mu-hydride)(mu-vinyl) derivative 4 have been obtained by X-ray crystallographic analyses.     

Synthesis, spectroscopic, and structural studies on transition metal complexes involving homoleptic tripodal selenoether and telluroether coordination

The reaction of [MCl2(NCMe)2] (M = Pd or Pt) with 2 molar equiv of MeC(CH2ER)3 (E = Se, R = Me; E = Te, R = Me or Ph) and 2 molar equiv of TlPF6 affords the bis ligand complexes [M(MeC(CH2ER)3)2][PF6]2. The crystal structure of [Pt(MeC(CH2SeMe)3)2][PF6]2 (C16H36F12P2PtSe6, a = 12.272(10) A, b = 18.563(9) A, c = 15.285(7) A, beta = 113.18(3) degrees, monoclinic, P2(1)/n, Z = 4) confirms distorted square planar Se4 coordination at Pt(II), derived from two bidentate tripod selenoethers with the remaining arm not coordinated and directed away from the metal center. Solution NMR studies indicate that these species are fluxional and that the telluroether complexes are rather unstable in solution. The octahedral bis tripod complexes [Ru(MeC(CH2SMe)3)2][CF3-SO3]2 and [Ru(MeC(CH2TePh)3)2][CF3SO3]2 are obtained from [Ru(dmf)6][CF3SO3]3 and tripod ligand in EtOH solution. The thioether complex (C18H36F6O6RuS8, a = 8.658(3) A, b = 11.533(3) A, c = 8.659(2) A, alpha = 108.33(2) degrees, beta = 91.53(3) degrees, gamma = 106.01(2) degrees, triclinic, P1, Z = 1) is isostructural with its selenoether analogue, involving two facially coordinated trithioether ligands in the syn configuration. NMR spectroscopy confirms that this configuration is retained in solution for all of the bis tripod Ru(II) complexes. These low-spin d6 complexes show unusually high ligand field splittings. The hexaselenoether Rh(III) complex [Rh(MeC(CH2SeMe)3)2][PF6]3 was obtained by treatment of [Rh(H2O)6]3+ with 2 molar equiv of MeC(CH2SeMe)3 in aqueous MeOH in the presence of excess PF6- anion, while the iridium(III) analogue [Ir(MeC(CH2SeMe)3)2][PF6]3 was obtained via the reaction of the Ir(I) precursor [IrCl(C8H14)2]2 with the selenoether tripod in MeOH/aqueous HBF4. NMR studies reveal different invertomers in solution for both the Rh and Ir species. The Cu(I) complexes [Cu(MeC(CH2ER)3)2]PF6 were obtained from [Cu(NCMe)4]PF6 and tripod ligand in CH2Cl2 solution. The corresponding Ag(I) species [Ag(MeC(CH2TeR)3)2]CF3SO3 (R = Me or Ph) were obtained from Ag[CF3SO3] and tripod telluroether. In contrast, a similar reaction with 2 molar equiv of MeC(CH2SeMe)3 afforded only the 1:1 complex [Ag(MeC(CH2SeMe)3)]CF3SO3. The structure of this species (C9H18AgF3O3SSe3, a = 8.120(3) A, b = 15.374(3) A, c = 14.071(2) A, beta = 93.86(2) degrees, monoclinic, P2(1)/n, Z = 4) reveals a distorted trigonal planar geometry at Ag(I) derived from one bidentate selenoether and one monodentate selenoether. These units are then linked to adjacent Ag(I) ions to give a one-dimensional linear chain cation.     

Mononuclear and dinuclear palladium and nickel complexes of phosphinimine-based tridentate ligands

The tridentate bis-phosphinimine ligands O(1,2-C(6)H(4)N=PPh(3))(2)1, HN(1,2-C(2)H(4)N=PR(3))(2) (R = Ph 2, iPr 3), MeN(1,2-C(2)H(4)N=PPh(3))(2)4 and HN(1,2-C(6)H(4)N=PPh(3))(2)5 were prepared. Employing these ligands, monometallic Pd and Ni complexes O(1,2-C(6)H(4)N=PPh(3))(2)PdCl(2)6, RN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][Cl] (R = H 7, Me 8), [HN(1,2-CH(2)CH(2)N=PiPr(3))(2)PdCl][Cl] 9, [MeN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][PF(6)] 10, [HN(1,2-CH(2)CH(2)N=PPh(3))(2)NiCl(2)] 11, [HN(1,2-CH(2)CH(2)N=PR(3))(2)NiCl][X] (X = Cl, R = iPr 12, X = PF(6), R = Ph 13, iPr 14), and [HN(1,2-C(6)H(4)N=PPh(3))(2)Ni(MeCN)(2)][BF(4)]Cl 15 were prepared and characterized. While the ether-bis-phosphinimine ligand 1 acts in a bidentate fashion to Pd, the amine-bis-phosphinimine ligands 2-5 act in a tridentate fashion, yielding monometallic complexes of varying geometries. In contrast, initial reaction of the amine-bis-phosphinimine ligands with base followed by treatment with NiCl(2)(DME), afforded the amide-bridged bimetallic complexes N(1,2-CH(2)CH(2)N=PR(3))(2)Ni(2)Cl(3) (R = Ph 16, iPr 17) and N(1,2-C(6)H(4)N=PPh(3))(2)Ni(2)Cl(3)18. The precise nature of a number of these complexes were crystallographically characterized.     

Group 11 complexes with unsymmetrical P,S and P,Se disubstituted ferrocene ligands

The reaction of the unsymmetrical ligands 1-diphenylphosphino-1'-(phenylsulfanyl)ferrocene and 1-diphenylphosphino-1'-(phenylselenyl)ferrocene, Fc(EPh)PPh2(E = S, Se), with several group 11 metal derivatives leads to the synthesis of complexes of the type [MX{Fc(EPh)PPh2}](M = Au, X = Cl, C6F5; M = Ag, X = OTf), (OTf = trifluoromethanesulfonate), [M{Fc(EPh)PPh2}2]X (M = Au, X = ClO4; M = Ag, X = OTf), [M(PPh3){Fc(EPh)PPh2}]OTf (M = Au, Ag), [Au2{Fc(SPh)PPh2}2](ClO4)2, [Au(C6F5)2{Fc(SePh)PPh2}]ClO4, [Au(C6F5)3{Fc(EPh)PPh2}], [Au2(C6F5)6{Fc(SePh)PPh2}] or [Cu{Fc(EPh)PPh2}2]PF6(E = S, Se). In these complexes coordination depends upon the metal centre; with gold it takes place predominantly to the phosphorus atom and with silver and copper to both phosphorus and chalcogen atoms. The treatment of some of the gold complexes with other metal centres affords heterometallic derivatives that in some cases are in equilibrium with the homometallic derivatives. Several compounds have been characterized by X-ray diffraction, four pairs of homologous compounds, yet not a single pair is isotypic. In many of them a three dimensional network is formed through secondary bonds such as hydrogen bonds, Au...Cl or Au...Se interactions. The complex [Ag(OTf){Fc(SePh)PPh2}] forms one-dimensional chains through trifluoromethanesulfonate bridging ligands.     

Unprecedented luminescent heteropolynuclear aggregates with gold thiolates as building blocks

The reaction of [AuCl(P-N)], in which P-N represents a heterofunctional phosphine ligand, with pentafluorothiophenol, HSC(6)F(5), gives the thiolate gold derivatives [Au(SC(6)F(5))(P-N)] (P-N = PPh(2)py (1), PPh(2)CH(2)CH(2)py (2), or PPhpy(2) (3)). Complex [Au(SC(6)F(5))(PPh(2)py)] (1) reacts with [Au(OTf)(PPh(2)py)] in a 1:1 or 1:2 molar ratio to afford the di- or trinuclear species [Au(2)(μ-SC(6)F(5))(PPh(2)py)(2)]OTf (4) and [Au(3)(μ(3)-SC(6)F(5))(PPh(2)py)(3)](OTf)(2) (5), with the thiolate acting as a doubly or triply bridging ligand. The reactivity of the mononuclear compounds [Au(SC(6)F(5))(P-N)] toward silver or copper salts in different ratios has been investigated. Thus, the treatment of [Au(SC(6)F(5))(P-N)] with Ag(OTf) or [Cu(NCMe)(4)]PF(6) in a 1:1 molar ratio gives complexes of stoichiometry [AuAg(OTf)(μ-SC(6)F(5))(P-N)] (P-N = PPh(2)py (6), PPh(2)CH(2)CH(2)py (7), or PPhpy(2) (8)) or [AuCu(μ-SC(6)F(5))(P-N)(NCMe)]PF(6) (P-N = PPh(2)py (9), PPh(2)CH(2)CH(2)py (10), or PPhpy(2) (11)). These complexes crystallize as dimers and display different coordination modes of the silver or copper center, depending on the present functionalized phosphine ligand. The treatment of [Au(SC(6)F(5))(PPh(2)py)] with silver and copper compounds in other molar ratios has been carried out. In a 2:1 ratio, the complexes [Au(2)M(μ-SC(6)F(5))(2)(μ-PPh(2)py)(2)]X (M = Ag, X = OTf (12); M = Cu, X = PF(6) (13)) are obtained. The same reaction in a 4:3 molar ratio affords the species [Au(4)M(2)(μ-SC(6)F(5))(3)(μ-PPh(2)py)(4)]X(3) (M = Ag, X = OTf (14); M = Cu, X = PF(6) (15)). The crystal structures of some of these complexes reveal different interactions among the metallic d(10) centers. The complexes display dual emission. The band at higher energy has been attributed to intraligand (IL) transitions, and the one at lower energy has been assigned to a ligand to metal (LM) charge transfer process. The latter emission is modulated by the heterometal (silver or copper).     

Oxidative addition of aryl halides: routes to mono- and dimetallic nickel amino-bis-phosphinimine complexes

Oxidative addition of an aryl-halide to Ni(COD)(2) in the presence of an equivalent of amino-bis-phosphinimine ligand affords complexes of the form [HN(CH(2)CH(2)N=PPh(3))(2)Ni-Ar][X] (Ar = C(6)H(4)F, C(6)H(5), X = Cl, Br) while the analogous reactions with 2 equivalents of Ni yield the amido-bridged complexes N(CH(2)CH(2)N=PPh(3))Ni(2)Br(3) and N(1,2-C(6)H(4)N=PPh(3))Ni(2)Br(3).     

Self-assembly of rings, catenanes, and a doubly braided catenane containing gold(I): the hinge-group effect in diacetylide ligands

Reaction of the flexible dialkynyldigold(I) precursors X(4-C6H4OCH2C-CAu)2 with 1,4-bis(diphenylphosphino)butane gave complexes of formula [[[mu-X(4-C6H4OCH2CCAu)2[mu-(Ph2PCH2CH2CH2CH2PPh2)]]n]. The complexes exist as 25-membered ring compounds with n = 1 when X = O or S, as [2]catenanes with n = 2 when X = CH2 or CMe2, and as a unique doubly braided [2]catenane, containing interlocked 50-membered rings with n = 4 when X = cyclohexylidene. These compounds form easily and selectively by self-assembly; reasons for the selectivity are also discussed.     

ortho-Metallated complexes of platinum(II) and diplatinum(I) containing the carbanions (2-diphenylphosphino)phenyl and (2-diphenylphosphino)-n-tolyl (n = 5, 6)

When the ortho-metallated complexes cis-[Pt(kappa(2)-C6H3-5-R-2-PPh2)2] (R = H 1, Me 2) are either heated in toluene or treated with CO at room temperature, one of the four-membered chelate rings is opened irreversibly to give dinuclear isomers [Pt2(kappa(2)-C6H3-5-R-2-PPh2)2(mu-C6H3-5-R-2-PPh2)2] (R = H 10, Me 11). A single-crystal X-ray diffraction study shows the Pt...Pt separation in 10 to be 3.3875(4) A. By-products of the reactions of 1 and 2 with CO are polymeric isomers (R = H 13, Me 14) in which one of the P-C ligands is believed to bridge adjacent platinum atoms intermolecularly. In contrast to the behaviour of 1 and 2, when cis-[Pt(kappa(2)-C6H3-6-Me-2-PPh2)2] (cis-3) is heated in toluene, the main product is trans-3, and reaction of cis-3 with CO gives a carbonyl complex [Pt(CO)(kappa(1)-C-C6H3-6-Me-2-PPh2)(2-C6H3-6-Me-2-PPh2)] 15, in which one of the carbanions is coordinated only through the carbon. Formation of a dimer analogous to 10 or 11 is sterically hindered by the 6-methyl substituent. Comproportionation of 1 or 2 with [Pt(PPh3)2L] (L = PPh3, C2H4) gives diplatinum(I) complexes [Pt2(mu-C6H3-5-R-2-PPh2)2(PPh3)2] (R = H 16, Me 17). An X-ray diffraction study shows that 17 contains a pair of planar-coordinated metal atoms separated by 2.61762(16) A. There is no evidence for the formation of an analogue containing mu-C6H3-6-Me-2-PPh2. The axial PPh3 ligands of 16 are readily replaced by ButNC giving [Pt2(mu-2-C6H4PPh2)2(CNBut)2] 18, which is protonated by HBF4 to form a mu-hydridodiplatinum(II) salt [Pt2(mu-H)(mu-2-C6H4PPh2)2(CNBut)2]BF4 [21]BF4. The J(PtPt) values in [21]BF4 and 18, 2700 Hz and 4421 Hz, respectively, reflect the weakening of the Pt-Pt interaction caused by protonation. Similarly, 16 and 17 react with the electrophiles iodine and strong acids to give salts of general formula [Pt2(mu-Z)(mu-C6H3-5-R-2-PPh2)2(PPh3)2]Y (Y = Z = I, R = H 19+, Me 20+; Z = H, Y = BF4, PF6, OTf, R = H 22+; Z = H, Y = PF6, R = Me 23+). A single-crystal X-ray diffraction study of [23]PF6 shows that the cation has an approximately A-frame geometry, with a Pt-Pt separation of 2.7888(3) A and a Pt-H bond length of 1.62(1) A, and that the 5-methyl substituents have undergone partial exchange with the 4-hydrogen atoms of the PPh2 groups of the bridging carbanion. The latter observation indicates that the added proton of [23]+ undergoes a reversible reductive elimination-oxidative addition sequence with the Pt-C(aryl) bonds.     

A new route to coordination complexes of nitroxyl (HN=O) via insertion reactions of nitrosonium triflate with transition-metal hydrides

Nitrosonium triflate reacts with cold methylene chloride solutions of mer,trans-ReH(CO)3(PPh3)2 (1) with 1,1-insertion of NO+ into the Re-H bond to give the orange nitroxyl complex [mer,trans-Re(NH=O)(CO)3(PPh3)2][SO3CF3] (3) in 86% isolated yield. Use of [NO][PF6] or [NO][BF4] gives analogous insertion products at low temperature, which decompose on warning to ambient temperature to the fluoride complex mer,trans-ReF(CO)3(PPh3)2 (4). A related 1,1-insertion is observed in the reaction of 1 with [PhN2][PF6] in acetone that affords the yellow-orange phenyldiazene salt [mer,trans-Re(NH=NPh)(CO)3(PPh3)2][PF6] (2), which has been characterized by X-ray crystallographic methods. The methyl derivative mer,trans-Re(CH3)(CO)3(PPh3)2 (5) also undergoes a 1,1-insertion reaction with [NO][SO3CF3] to give the nitrosomethane adduct [mer,trans-Re{N(CH3)=O}(CO)3(PPh3)2][SO3CF3] (6) as red crystals in 75% yield. The nitroxyl complex [cis,trans-OsBr(NH=O)(CO)2(PPh3)2][SO3CF3] (8) can be similarly prepared as orange crystals in 52% yield by reaction of cis,trans-OsHBr(CO)2(PPh3)2 (7) with [NO][SO3CF3] in cold methylene chloride solution.     

Penta- and hexaruthenium carbonyl 'raft' complexes supported by monocarborane cage ligands

Reaction between [PPh4][closo-4-CB8H9] and [Ru3(CO)12] in refluxing toluene affords the unprecedented hexaruthenium metallacarborane salt [PPh4][2,3,7-{Ru(CO)3}-2,6,11-{Ru(CO)3}-7,11,12-{Ru(CO)3}-3,6,12-(micro-H)3-2,2,7,7,11,11-(CO)6-closo-2,7,11,1-Ru3CB8H6] (1a), which contains a planar Ru6 'raft' supported by a {CB8} monocarborane cluster. Addition of [CuCl(PPh3)]4 and Tl[PF6] to a CH2Cl2 solution of 1a results in simple cation replacement, forming the analogous [Cu(PPh3)3]+ salt (1b). The phenyl-substituted monocarborane [NEt4][6-Ph-nido-6-CB9H11] reacts with [Ru3(CO)12] in refluxing 1,2-dimethoxyethane to afford the pentaruthenium cluster species [N(PPh3)2][2,3,7-{Ru(CO)3}-3,4,8-{Ru(CO)3}-7,8-(micro-H)2-1-Ph-2,2,3,3,4,4-(CO)6-hypercloso-2,3,4,1-Ru3CB8H6] (2), after addition of [N(PPh3)2]Cl. Treatment of 2 with [CuCl(PPh3)]4 and Tl[PF6] in CH2Cl2 forms the zwitterionic complex [10,12-{exo-Cu(PPh3)2}-2,3,7-{Ru(CO)3}-3,4,8-{Ru(CO)3}-7,8,10,12-(micro-H)4-1-Ph-2,2,3,3,4,4-(CO)6-hypercloso-2,3,4,1-Ru3CB8H4] (3). Substitution of CO by PPh3 with concomitant cation replacement occurs on introduction of [AuCl(PPh3)], Tl[PF6], and PPh3 to a CH2Cl2 solution of 2, forming [Au(PPh3)2][2,3,7-{Ru(CO)2PPh3}-3,4,8-{Ru(CO)2PPh3}-7,8-(micro-H)2-1-Ph-2,2,3,3,4,4-(CO)6-hypercloso-2,3,4,1-Ru3CB8H6] (4). Crystallographic studies confirmed the cluster architectures in 1b, 2, and 3.     

Tetranuclear platinum phosphido complexes with different structures

The addition of [NBu4]Br or [NBu4][BH4] to solutions of [Pt4(mu-PPh2)4(C6F5)4(CO)2] yields the complexes [NBu4]2[Pt4(mu-PPh2)4(mu-X)2(C6F5)4] (X=Br, H,) in which the two CO groups have been replaced by two anionic, bridging X ligands. The total valence electron counts are 64 and 60, respectively; thus, complex does not require Pt-Pt bonds, while two metal-metal bonds are present in, as their NMR spectra confirm. Also, the NMR spectra indicate a nonsymmetrical "Pt(mu-PPh2)2Pt(mu-PPh2)(mu-X)Pt(mu-PPh2)(mu-X)Pt" disposition for and. Treatment of with HX (X=Cl, Br) yields the complexes [NBu4]2[Pt4(mu-PPh2)4(mu-H)2(C6F5)3X] (X=Cl, Br,). These complexes react with [Ag(OClO 3)PPh3] with displacement of the halide and formation of [NBu4][Pt4(mu-PPh2)4(mu-H)2(C6F5)3PPh3]. Complexes maintain the same basic skeleton as, with two Pt-Pt bonds. Complex is, however, an isomer of the symmetric [NBu4]2[{(C6F5)2Pt(mu-PPh2)2Pt(mu-Br)}2], which has been prepared by a metathetical process from the well-known [NBu4]2[{(C6F5)2Pt(mu-PPh2)2Pt(mu-Cl)}2]. The comparison of the X-ray structures of and confirms the different disposition of the bridging ligands, and their main structural differences seem to be related to the size of Br- and its position in the skeleton.     

Trithio-chloro molybdate [MoClS3]-: a versatile precursor for molybdenum trisulfido complexes

The reaction of trithiomolybdate [PPh 4] 2[MoOS 3] ( 1) with 2 equiv of trimethylchlorosilane generated trithio-chloro molybdate [PPh 4][MoClS 3] ( 2) in high yield, by way of a siloxy complex [PPh 4][Mo(OSiMe 3)S 3] ( 3). This intriguing reaction provided us with a convenient entry into a series of mononuclear molybdenum trisulfido complexes, [PPh 4][MoS 3X] ( 4, X = Cp*; 6a, X = S (t) Bu; 6b, X = SPh; 6c, X = SMes (Mes = mesityl); 6d, X = STip (Tip = 2,4,6-triisopropylphenyl); 6e, X = SDmp (Dmp = 2,6-dimesitylphenyl); 7, X = NPh 2; 8a, X = O (t) Bu; 8b, X = OPh; 8c, X = OC(CH 2) (t) Bu; 8d, X = OC(CH 2)Ph), which were obtained by the reactions of 2 with the corresponding potassium salts. In a similar manner, a citrate complex [PPh 4][MoS 3(Me 3cit)] ( 9, Me 3cit = OC(CH 2CO 2Me) 2(CO 2Me)) was synthesized, which may model the molybdenum site of the nitrogenase FeMo-cofactor. The molecular structures of 2, 6c, 7, 8a, 8b, 8c, and 9 were determined by X-ray crystallography.     

Synthesis and Crystal Structure of [CpRu(η5-C5H5)(dppc)Cl][PF6]

The title complex [Ru(η5-C5H5)(dppc)Cl][PF6] has been synthesized by the reaction of [Ru(η5-C5H5)(PPh3)2Cl] with [dppc][PF6] (1,1'-bis(diphenylphosphino)cobaltocenium hexaflurophospate) in CH2Cl2, and its crystal structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in monoclinic, space group P21/n with a = 15.754(8), b =13.704(7), c=19.120(10) (A),β=106.148(9)°, V=3965(4) (A)3, Z=4, C40H35Cl3CoF6P3Ru, Mr=988.94, Dc=1.657 g/cm3, F(000) = 1984 and μ(MoKα) = 1.181 mm-1. The final R = 0.0425 and wR = 0.1001 for 7002 independent reflections. The title complex shows a mononuclear Ru(Ⅱ)capped by an η5-Cp ring, a chelating η2-dppc and a terminal chloride to assume a three-legged piano-stool configuration.     

Gold and silver complexes with the ferrocenyl phosphine FcCH2PPh2

Linear gold(I) and silver(I) complexes with the ferrocenyl phosphine FcCH2PPh2 [Fc = (eta5-C5H5)Fe(eta5-C5H4)] of the types [AuR(PPh2CH2Fc)], [M(PPh3)(PPh2CH2Fc)]OTf, and [M(PPh2CH2Fc)2]OTf (M = Au, Ag) have been obtained. Three-coordinate gold(I) and silver(I) derivatives of the types [AuCl(PPh2CH2Fc)2] and [M(PPh2CH2Fc)3]X (M = Au, X = ClO4; M = Ag, X = OTf) have been obtained from the corresponding gold and silver precursors in the appropriate molar ratio, although some of them are involved in equilibria in solution. The crystal structures of [AuR(PPh2CH2Fc)] (R = Cl, C6F5), [AuL(PPh2CH2Fc)]OTf (L = PPh3, FcCH2PPh2), [Au(C6F5)3(PPh2CH2Fc)], and [Ag(PPh2CH2Fc)3]OTf have been determined by X-ray diffraction studies.     

Heteropolynuclear complexes with the ligand Ph2PCH2SPh: theoretical evidence for metallophilic Au-M attractions

Addition of two equivalents of diphenylthiomethylphosphine (PPh2-CH2SPh) to the starting materials [Au(tht)2]A (tht = tetrahydrothiophene), AgCF3SO3, or [Cu(CH3CN)4]CF3SO3 produces the mononuclear derivatives [M(PPh2CH2SPh)2]A (M = Au, A = CF3SO3 (1a); M = Au, A = ClO4 (1b); M = Ag, A = CF3SO3 (4); M = Cu, A = CF3SO3 (5)) which are able to form the heterodinuclear complexes [AuM'(PPh2CH2SPh)2](CF3SO3)2 (M' = Ag (2), Cu (3)) with a P-Au-P environment. If the starting gold complex is [Au(C6F5)(tht)], reaction with the phosphine produces [Au(C6F5)-(PPh2CH2SPh)] (6) from which, by reaction with AgCF3SO3 or [Cu(CH3CN)4]CF3SO3, the "snake"-type linear complexes [Au2M(C6F5)2-(PPh2CH2SPh)2]CF3SO3 (M = Ag (7), Cu (8)) are obtained. If the silver starting complex is AgCF3CO2, reaction in a 1:1 ratio gives the tetranuclear complex [Au2Ag2(C6F5)2(PPh2CH2SPh)2-(CF3CO2)2] (9). When the molar ratio is 1:2 the trinuclear complex [AuAg2(C6F5) (CF3CO2)2(PPh2CH2SPh)] (10) is obtained. According to ab initio calculations, the presence of only one gold atom is enough to induce metallophilic attractions in the group congeners, and this effect can be modulated depending on the gold ligand.     

Spectroelectrochemical Studies of Copper(I) Complexes with Binaphthyridine and Biquinoline Ligands. Crystal Structure Determination of Bis(6,7-dihydrodipyrido[2,3-b:3',2'-j][1,10]phenanthroline)copper(I) Tetrafluoroborate

The electrochemical and spectral properties of some copper(I) polypyridyl complexes based on 6,7-dihydrodibenzo[b,j][1,10]phenanthroline, dmbiq, and 6,7-dihydrodipyrido[2,3-b:3',2'-j][1,10]phenanthroline, dmbinap, are reported. These complexes are [Cu(dmbiq)(2)](+), 1; [Cu(dmbiq)(PPh(3))(2)](+), 2; [Cu(dmbinap)(2)](+), 3; and [Cu(dmbinap)(PPh(3))(2)](+), 4. 3 and 4 may be reduced to form ligand-based radical anion species. The resonance Raman spectra of 3(*)()(-)() and 4(*)()(-)() are almost identical and correspond closely to the spectrum of dmbinap(*)()(-)() and the reported spectra of complexes containing 2,2'-biquinoline radical anion moieties. Reduction processes for 1 and 2 are irreversible. For 1 the electronic spectral changes arising from reduction suggest demetallation of the complex. The structure of [Cu(C(18)H(12)N(4))(2)][BF(4)].CH(2)Cl(2) (3[BF(4)].CH(2)Cl(2)) was determined by single-crystal X-ray diffraction. It crystallized in the monoclinic space group P2(1)/c with cell dimensions a = 14.059(7) ?, b = 15.058(6) ?, c = 16.834(9) ?, beta = 111.56(5) degrees, Z = 4, rho(calcd) = 1.611 g/cm(3), and R(F(o)) = 0.0497.     

Diazo complexes of rhenium: preparations and crystal structures of the bis(dinitrogen), [Re(N2)2(PPh(OEt)2)4][BPh4] and methyldiazenido [ReCl(CH3N2)(CH3NHNH2)(PPh(OEt)2)3][BPh4] derivatives

Depending on experimental conditions and the nature of the hydrazine, the reactions of ReCl3P3 [P = PPh(OEt)2] with RNHNH2 (R = H, CH3, tBu) afford the bis(dinitrogen) [Re(N2)2P4]+ (2+), dinitrogen ReClN2P4 (3), and methyldiazenido [ReCl(CH3N2)(CH3NHNH2)P3]+ (1+) derivatives. In contrast, reactions of ReCl3P3 [P = PPh(OEt)2, PPh2OEt] with arylhydrazines ArNHNH2 (Ar = Ph, p-tolyl) give the aryldiazenido cations [ReCl(ArN2)(ArNHNH2)P3]+ (4+) and [ReCl(ArN2)P4]+ (7+) and the bis(aryldiazenido) cations [Re(ArN2)2P3]+ (5+, 6+). These complexes were characterized spectroscopically (IR; 1H and 31P NMR), and the BPh4 complexes 1, 2, and 7 were characterized crystallographically. The methyldiazenido derivative [ReCl(CH3N2)(CH3NHNH2)(PPh(OEt)2)3][BPh4] (1) crystallizes in space group P1 with a = 15.396(5) A, b = 16.986(5) A, c = 11.560(5) A, alpha = 93.96(5) degrees, beta = 93.99(5) degrees, gamma = 93.09(5) degrees, and Z = 2 and contains a singly bent CH3N2, group bonded to an octahedral central metal. One methylhydrazine ligand, one Cl- trans to the CH3N2, and three PPh(OEt)2 ligands complete the coordination. The complex [Re(N2)2(PPh(OEt)2)4][BPh4] (2) crystallizes in space group Pbaa with a = 23.008(5) A, b = 23.367(5) A, c = 12.863(3) A, and Z = 4. The structure displays octahedral coordination with two end-on N2 ligands in mutually trans positions. [ReCl(PhN2)(PPh(OEt)2)4][BPh4] (7) crystallizes in space group P2(1)/n with a = 19.613(5) A, b = 20.101(5) A, c = 19.918(5) A, beta = 115.12(2) degrees, and Z = 4. The structure shows a singly bent phenyldiazenido group trans to the Cl- ligand in an octahedral environment. The dinitrogen complex ReClN2P4 (3) reacts with CF3SO3CH3 to give the unstable methyldiazenido derivative [ReCl(CH3N2)P4][BPh4]. Reaction of the methylhydrazine complex [ReCl(CH3N2)(CH3NHNH2)P3][BPh4] (1) with Pb(OAc)4 at -30 degrees C results in selective oxidation of the hydrazine, affording the corresponding methyldiazene derivative [ReCl(CH3N=NH)(CH3N2)P3][BPh4] (8). In contrast, treatment with Pb(OAc)4 of the related arylhydrazines [ReCl(ArN2)(ArNHNH2)P3][BPh4] (4) [P = PPh(OEt)2] gives the bis(aryldiazenido) complexes [Re(ArN2)2P3][BPh4] (5). Possible protonation reactions of Br?nsted acids HX with all diazenides, 1, 4, 5, 6, and 8, were investigated and found to proceed only in the cases of the bis(aryldiazenido) complexes 5 and 6, affording, with HCl, the octahedral [ReCl(ArN=NH)(ArN2)P3][BPh4] or [ReCl(Ar(H)NN)(ArN2)P3][BPh4] (10) (Ar = Ph; P = PPh2OEt) derivative.     

From a trinuclear platinum(III) phosphido derivative to a platinum(II) cluster: formation of a P-C bond

Reaction of the trinuclear Pt(III)-Pt(III)-Pt(II) [(C6F5)2Pt(III)(mu-PPh2)2Pt(III)(mu-PPh2)2Pt(C6F5)2] (2) derivative with NBu4Br or NBu4I results in the formation of the trinuclear Pt(II) complexes [NBu4][(PPh2C6F5)(C6F5)Pt(mu-PPh2)(mu-X)Pt(mu-PPh2)2Pt(C6F5)2] [X = I (3), Br (4)] through an intramolecular PPh2/C6F5 reductive coupling and the formation of the phosphine PPh2C6F5. The trinuclear Pt(II) complex [(PPh2C6F5)(C6F5)Pt(mu-PPh2)Pt(mu-PPh2)2Pt(C6F5)2] (5), which displays two Pt-Pt bonds, can be obtained either by halide abstraction in 4 or by refluxing of 2 in CH2Cl2. This latter process also implies an intramolecular PPh2/C6F5 reductive coupling. Treatment of complex 5 with several ligands (Br-, H-, and CO) results in the incorporation of the ligand to the cluster and elimination of one (X = H-) or both (X = Br-, CO) Pt-Pt bonds, forming the trinuclear complexes [NBu4][(PPh2C6F5)(C6F5)Pt(mu-PPh2)(mu-X)Pt(mu-PPh2)2Pt(C6F5)2] [X = Br (6), H (7)] or [(PPh2C6F5)(C6F5)Pt(mu-PPh2)2Pt(mu-PPh2)(CO)Pt(C6F5)2(CO)] (8). The structures of the complexes have been established on the basis of 1H, 19F, and 31P NMR data, and the X-ray structures of the complexes 2, 3, 5, and 7 have been established. The chemical relationship between the different complexes has also been studied.