Quasi-solid medium for photoinduced charge separation

New quasi-solid was proposed as a medium for photoinduced charge separation. Photoinduced charge separation and hydrogen production with the new quasi-solid medium using polysaccharide has been investigated. The new medium is a quasi-solid polysaccharide containing a large quantity of water. This medium is tight and elastic solid, obtained by cooling an aqueous solution of a polysaccharide (agarose or κ-carrageenan in this paper) to room temperature after it was dissolved in water by heating. When the quasi-solid (agarose or κ-carrageenan) involving sacrificial electron donor ethylenediaminetetraacetate (EDTA), tris(2,2′-bipyridine)ruthenium complex ([Ru(bpy)₃]²⁺) and methylviologen (MV²⁺) was irradiated with visible light, methylviologen cation radical (MV⁺) was formed. The formation rate of methylviologen cation radical in an agarose solid was faster than that in a κ-carrageenan one. Photoinduced hydrogen production was achieved with this system containing additionally proton reduction catalyst such as platinum black (Pt black), platinum oxide (PtO₂), and ruthenium oxide (RuO₂). The characteristics of this solid medium for photochemical reactions were discussed.     

Methylviologen cation radiacal,its dimer and complex in various media

Chemical, photochemical and radiolytic reduction of methylviologen, MV²⁺ (1,1'-dimethyl-4,4' -dipiridinum) leads to the formation of methylviologen cation radical, MV ^+.. It is stable in aprotic solvents, dry polymer foils and frozen aqueous solutions. In the presence of water at ambient temperatures MV^+. can undergo oxidation or conversion into dimer (MV^+.)₂ and/or complex MV^+. (MV²⁺). Upon freezing or addition of neutral salt, MV^+. forms dimers in diluted MV²⁺ solutions (below 0.01 mol dm^-3) while in concentrated ones (exceeding 0.05 mol dm^-3) the formation of the complex prevails. Spectral and E.S.R. characteristics of MV^+., its dimer and complex are given.     

Hydrogen Evolution from Water by Visible Light,a Homogeneous Three Component Test System for Redox Catalysis

Irradiation by visible light of a neutral aqueous solution containing Ru (bipy) as a sensitizer, methylviologen (MV⁺²) as an electron acceptor and triethanolamine or cysteine as an electron donor leads to the formation of stable methylviologen radical cation (MV⁺). The kinetics and mechanism of the photoinduced reactions occurring in such a system were explored by laser photolysis technique. In the presence of Adams catalyst MV⁺ is reoxidized by water under simultaneous evolution of hydrogen. Optimum conditions for the water reduction under continuous illumination are elaborated and implications for an energy conversion system discussed.     

The Electrochemical Measurement of Rate Constants for the Catalyzed Oxidation and Reduction of Water in microheterogeneous systems

The appearent first-order rate constants for the oxidation of water by iron tris (bipyridyl) (Fe (bpy)³⁺₃), and reduction of water by methylviologen (MV⁺) catalyzed by a stabilized RuO₂ or Pt-sol, respectively, were measured. Rate constants for water oxidation at pH 7 of 0.4 s^?1 and water reduction at pH 4.7 and pH 1 of up to 460 s^?1 for different sols were found.     

Electrochemical Condensation of Methylviologen on Specifically‐adsorbed Anion Layers

The adsorption of methylviologen dications (MV²⁺) on single‐crystalline Au electrodes in both H₂SO₄ and HClO₄ was examined. MV²⁺ strongly interacted with sulfate and bisulfate anions adsorbed on the Au(111) electrode surface in 0.05 M H₂SO₄ under a controlled potential of 1.25 V vs. the reversible hydrogen electrode (RHE). A characteristic non‐Faradaic current was observed at 1.10 V vs. RHE. When adsorption of MV²⁺ was carried out in 0.1 M HClO₄, the electrochemical response of MV²⁺ was less than that obtained in H₂SO₄. The results show that the formation of a highly ordered sulfate/bisulfate adlayer plays an important role in the formation of condensed MV²⁺ layers. Examination of polycrystalline Au and Au(100) electrodes revealed a poor electrochemical response due to the surface roughness of the Au substrate, but the electrochemical detection was applicable to polycrystalline Au electrodes. A systematic investigation of the structural dependency of viologen derivatives showed that molecular size is important for electrostatic interactions with a highly ordered sulfate/bisulfate adlayer. The findings of the present study demonstrate successful detection of MV²⁺ at a concentration of ≤1 pM with a non‐Faradaic current.     

Photoelectrochemical and characterization of intercalation compound of KTiNbO5 with methylviologen

Methylviologen (1,1′-dimethyl-4,4′dipyridinium ion, MV²⁺) has been intercalated into the interlayer space of layered potassium titanoniobate (KTiNbO₅) by a method involving the displacement of guest molecules using a n-hexylammonium titanoniobate (HeNH₃⁺-TiNbO₅) intercalation compound. The methylviologen titanoniobate (MV²⁺-TiNbO₅) intercalation compound was characterized using SEM, TEM, XRD, IR and elemental analysis. The photochemical and electrochemical behaviors of the MV²⁺-TiNbO₅ hybrid thin film were investigated. The photo excitation of oxygen-present MV²⁺-TiNbO₅ thin film with UV light indicated the electron transfer from the titanoniobate layer to MV²⁺ to form MV⁺ radical cation. The cyclic voltammogram of the MV²⁺-TiNbO₅ hybrid thin film exhibited two consecutive electron-transfer steps.     

Microdetermination of nitroprusside by its inhibitory effect on the photolysis of the methylviologen-EDTA-acridine yellow system

A study of the photochemical reaction of the methylviologen (MV²⁺)-EDTA-Acridine Yellow system in the presence of nitroprusside (NP) is presented. The rate of photoreduction of methylviologen to the cation radical MV⁺ is dramatically retarded by small amounts of NP, which has an inhibitory effect on the excited state of Acridine Yellow, which is the activator of the process. Optimal conditions for the determination of NP in the range of concentrations between 2 × 10^–6 and 3 × 10^–5 M are described. The method proposed has been applied with excellent results to the determination of NP in pharmaceuticals and human serum, after protein elimination by perchloric acid.     

Wasserphotolyse mit Hilfe von funktionellen Tris-(2,2′-bipyridin)ruthenium(II)-Komplexen

19 Tris(2,2-bipyridyl)ruthenium(II) complexes with functional groups were synthesized and investigated as sensitizers in photochemical hydrogen production by visible light with the four component system Ru(bipy) ₃ ²⁺ , methylviologen, ethylenediamintetraacetic acid and colloidal platinum ruthenium-bipyridine complexes with electron accepting groups, e.g. halogen or carboxylate were found to be most effective in hydrogen generation.

Herrn Prof. Dr. mult.Viktor Gutmann zum 65. Geburtstag gewidmet.     

Thermotropic gelation of ovalbumin 1. Viscoelastic properties of gels as a function of heating conditions and protein concentration at various pH values

A study has been undertaken of stress relaxation in ovalbumin thermotropic gels with a concentration of 8–20%, depending on time and temperature of heating (respectively, 20–60 min, 70°–110°C), at pH 2.5–10.0. In all instances, the dependence of the initial gel elasticity modulus on heating has a single maximum. Gelation conditions corresponding to this maximum are considered optimal. Optimal gelation time is 30 min, regardless of pH. On the other hand, the optimal heating temperature depends on pH. To the right and left of the isoelectric point of protein (2.5pH<4.0 and 5.5G) of gels on heating conditions, pH and protein concentration (X ₁,X ₂,X ₃,X ₄), as well as on time of relaxation (t) may be generally described asG(X ₁,X ₁,X ₁,X ₁,t)=G _e(X ₁,X ₂,X ₃,X ₄)f(t), whereG _e is the equilibrium value of the elasticity modulus, and f(t) the relaxation function. Thus, a change in the parameters only affects the value of the equilibrium elasticity modulus, and exerts no effect on the relaxation time spectrum. For this reason, all the relaxation curves obtained may be transformed into two normalized relaxation functions:f(t)=f(t)/f(1)=G(X ₁,X ₂,X ₃,X ₄,t)/G(X ₁,X ₂,X ₃,X ₄, 1)Each of these normalized functions corresponds to one of the homologous groups. Rheological similarity of gels in each homologous group evidently points to their structural similarity. Invariance of the gel relaxationproperties with regard to protein concentration, leads to a concentration dependence of the equilibrium modulus at various pH values. These dependences are curvilinear on a double logarithmic scale. The slope of the curve exceeds 2 in the entire concentration interval studied. In other words, the dependences obtained cannot be described by the usual law of squares. On the other hand, they adequately match Hermans theoretical relation for a network formed by random association of identical polyfunctional particles without cyclization. This simple model evidently gives a true picture of the major regularities of thermotropic gelation for ovalbumin. An agreement between this theory and experiment was achieved for a protein concentration ofC ^*=6.0±1.0% at the gel point regardless of pH. Invariance of gelpoint position with regards to pH demands further confirmation.List of symbols T _h,t _h heating temperature and time - T _h ^* ,t _h ^* optimal heating temperature and time - C protein concentration - C ^* protein concentration in gel-point - G relaxation modulus - G _e equilibrium modulus - f(t) relaxation function - t time of relaxation - f(t) normalized relaxation function - fT _A (t), f _B (t) normalized relaxation functions of groups A and B - G ₁ T _h,t _h-reduced modulus - G ₂ T _h,t _h, pH-reduced modulus - G ₃ C-reduced modulus - b ₁ T _h, t_h reduction parameter of modulus - b ₂ pH reduction parameter of modulus - b ₃ C reduction parameter of modulus - W_g gel-fraction     

基于曙红Y氧化性猝灭的高活性和高稳定的可见光催化产氢催化剂

以曙红Y(EY)敏化Pt/TiO₂(EY-Pt/TiO₂)光催化产氢体系为模型, 研究了电子传递剂甲基紫精(MV²⁺)的加入对该体系产氢活性和稳定性的影响, 并通过紫外-可见光(UV-Vis)吸收光谱、荧光光谱和光电化学表征手段对MV²⁺的作用机制进行了研究. 结果表明, 当以三乙醇胺(TEOA)为电子给体时, MV²⁺可使EY激发态发生氧化性和还原性淬灭, 有效降低了不稳定中间体EY^3-·的形成和积累, 促进了电子由染料分子向产氢活性位点的有效传递, 从而提高了产氢体系的活性和稳定性. 两种敏化体系瞬态光电流以及产氢活性受EY浓度影响的差异进一步证明, MV²⁺作为电子传递剂有效提高了光生电子的传递和利用效率.     

The viscoelasticity of spinnable solutions of alkyltrimethylammonium salicylates

The viscoelasticity has been measured for aqueous solutions of tetradecyl-and hexadecyltrimethylammonium salicylates (C₁₄TASal, C₁₆TASal). The aqueous solutions of C₁₄TASal without salt displayed the gel-like behavior at 10.0×10^–2 g cm^–3, but those more dilute than 3.2×10^–2 g cm^–3 presented the viscoelasticity similar to that of a Maxwell liquid. The Maxwell-like behavior was converted to the polymer-like one on the addition of (0.1–0.2) M NaBr or (0.02–0.2) M NaSal. The gel-like viscoelasticity can be connected with the spinnability of cohesive fracture failure, and the Maxwell-like and polymer-like viscoelasticities are concerned with the spinnability of ductile failure. The gel-like and Maxwell-like viscoelasticities originate in the pseudo-network formed by the pseudo-linkages between rodlike micelles, while the polymer-like viscoelasticity is caused by the entanglement of long rodlike micelles in semidilute and concentrated solutions. The aqueous solutions of C₁₆TASal behaved very similar to those of C₁₄TASal.     

Polymer adsorption on fine particles; the effects of particle size and its stability

The effects of particle size on polyacrylamide (PAAm,M _w =59×10⁴, 500×10⁴) adsorption were investigated using a series of well-characterized hematite (-Fe₂O₃) dispersions. The -Fe₂O₃ particles with highly monodisperse and nearly spherical shape ranged in radius from 23 nm to 300 nm. the maximum amount of PAAm adsorption (M _m ) in each system, showed a steady increase with decreasing particle radius and was influenced strongly by particle concentrations in the medium. Furthermore, it was realized that the diameter of -Fe₂O₃ particles after treatment with PAAm under different particle concentrations decreased with increasing particle concentration. The relation between particle concentration in the medium and particle size after treatment was also influenced by the medium pH, i.e., at the medium pH close to the isoelectric point of -Fe₂O₃ particles (pH^o=9.2), the particle size after treatment increased with increasing particle concentration. All these results suggest that in the system of ultra-fine particles, the mixing process between particle-particle and polymerparticle will play an important role on the conformation of adsorbed polymer layer.     

Solar hydrogen production from cellulose biomass with enzymatic and artificial photosynthesis system

Bio-hydrogen gas production from renewable resources of timber waste, including cellulose, lignin, etc., is important in the environmental science and energy source development fields. A solar hydrogen production system by coupling waste paper including cellulose biomass with cellulase and glucose dehydrogenase (GDH), and hydrogen production with platinum nano-particle via the photoreduction of methylviologen (MV²⁺) using the visible light-harvesting function of Mg Chl-a, is developed.     

Transport and kinetics at microheterogeneous electrodes: Part V. The methylviologen/platinum system

Results are reported for the reaction of methylviologen radical cation, MV⁺ with platinum colloidal particles, studied by stopped flow spectrophotometry. The rate of the reaction depends on the gaseous pretreatment of the particles. For particles reduced by hydrogen, the kinetics are usually first order with respect to MV⁺. The reaction is also first order in the concentration of platinum, and is inhibited in a first order manner by the product MV²⁺. This inhibition suggests that MV²⁺ is adsorbed on the particle surfaces, and this has been confirmed by ac, ring—disc electrode studies on macroscopic platinum electrodes. At high concentrations of MV⁺ some deviation from first order kinetics is observed. These results are all explained by a kinetic model in which either the desorption of MV²⁺ or the adsorption of MV⁺ is the rate limiting process. The rate of consumption of MV⁺ on an oxidised surface is an order of magnitude faster than that on the reduced surface. Ring—disc studies show that this is because the MV⁺ is not producing H₂ but is reducing the surface oxide. The results are shown to fit a simple model which takes into account this titration of the oxide layer. The model also explains why the rate on partially oxidised surfaces will appear to have an order greater than one in [Pt].     

Inclusion of methylviologen dication in a cadmium tetracyanoplatinate host clathrate showing photochromism and photoluminescence modulation

A cadmium tetracyanoplatinate host clathrate, (MV)[Cd₂{Pt(CN)₄}₃]?2(H₂O) (1), including a methylviologen dication (MV²⁺) was synthesized, and the crystal structures, photochromic and photoluminescence properties were investigated. In 1, the alternatively parallel stacking between the MV²⁺ dications as electron acceptors in the channels and the electron donors [Pt1(CN)₄]^2– units in the host frameworks give a unique donor-acceptor (DA) system. Under UV irradiation, the electron transfer between MV²⁺ and [Pt(CN)₄]^2– ions generates MV^·+ radicals with a photochromic behavior from pale-yellow to blue. This process occurs through single-crystal-to-single-crystal (SCSC) transformation and obvious structure variation of viologen cations is successfully observed. Moreover, the spectral overlap between the emission bands of 1 and the absorption around 623 nm for the MV^·+ radicals leads to a modulation of the photoluminescence.     

The effect of metallic cations on the electrophoretic properties of a pretreatedHevea latex

High-ammonia latex concentrate prepared from doubly-centrifuged fieldHevea latex was exhaustively dialysed to remove any residual water-soluble non-rubber constituents. The electrophoretic mobilities of the dialysed latex in the presence of various metallic cations were investigated as a function of electrolyte concentration. The mobility decreased with increasing concentration of the cations Na⁺, Ba²⁺, Mg²⁺ and Ca²⁺ in a manner consistent with the effect of simple electrolyte on compression of the electric double layer. Anomalous behaviour was noted for the divalent ion copper, in that it reversed the charge of the latex particles at a concentration even lower than that of uranyl ions. Multivalent cations (lanthanum, cerium and thorium) had a profound influence on the latex particles where very low charge reversal concentrations were observed. It is believed that strong adsorption of hydrolysed species from the metallic ions was responsible for reversing the charge of the originally negative latex particles. These experiments indicated that the efficiency with which the cations reversed the charge of the latex particle surface was in the order: lanthanum > cerium > copper > thorium > uranyl > calcium > magnesium > barium > sodium. The number of cation binding sites on the latex particle surface and the chemical free energies of cation adsorption were calculated. It was found that the interaction of the latex particle with the hydrolysable metallic cations was much more stronger than that with the simple divalent cations and that this intercation was comparable to that of biological surfaces.     

Electrical properties of planar bimolecular surfactant membrane

Planar bimolecular film of the triple long-chain salt(dihexadecyldimethylammonium hexadecanesulfonate) was found to be formed in the electrolyte solutions was carried out at different temperatures by the transient D. C. method. In four electrolyte solutions of Li⁺, Na⁺, K⁺, and Cs⁺ chlorides, the resistance of the membrane was very high (up to 10⁷ ohm·cm²). From the temperature-dependence of conductivity, the activation energy of ion transfer through the film was calculated by the Arrhenius equation. The magnitude of the activation energy was related with the size of the crystallographic radius.The authors acknowledge financial support from the Swiss National Science Foundation.     

The electrical double layer on oxides: Specific adsorption of chloride and methylviologen on ruthenium dioxide

The double-layer properties of colloidal RuO₂, prepared by thermal decomposition of RuCl₃ at 420°C, have been studied by potentiometric acid-base titrations in combination with electrophoretic mobility measurements. The point of zero charge (pzc) in KNO₃ solutions was found to be pH 5.75 ± 0.05, and the isoelectric point (iep) is positioned at pH 5.8. From the total capacitance of the double layer at the pzc an electrochemical surface area of 21.5 m²/g has been found, which is equal to the BET surface area. The capacitance of the inner part of the double layer (C_i) is 300 μF/cm², which is high compared to C_i on AgI and Hg, but of the same order as that commonly found for oxides. This subject is briefly discussed. The surface charge (σ₀) as a function of pH could be fitted satisfactorily with a simple double-layer model. In the presence of KCl the pzc and the iep are shifted to higher and lower pH, respectively, indicating specific adsorption of Cl⁻ ions. The ionic composition of the double layer as a function of σ₀ and the specific adsorption of Cl⁻ at the pzc have been calculated by a straightforward thermodynamic analysis combined with diffuse double-layer theory. Methylviologen (MV²⁺) also adsorbs specifically and at negative surface charges superequivalent adsorption can take place. In the presence of an excess of KNO₃, specific adsorption of MV²⁺ is no longer noticeable. Some consequences for the catalytic reduction of water by RuO₂ in the presence of MV²⁺ are considered.     

Photochemical Reduction of Water to Hydrogen Catalyzed by Mixed-Valent Tetranuclear Platinum Complex

Abstract

Mixed-valent tetranuclear platinum complex, [Pt₄(NH₃)₈(C₄H₆NO)₄] ⁿ⁺ (n = 4, 5, 6, 8; C₄H₆NO = deprotonated α-pyrrolidone), is used as a homogeneous hydrogen-producing catalyst in a photochemical model system containing EDTA as an electron donor, Ru(bpy)₃ ²⁺ as a sensitizer and methylviologen (MV²⁺) as an electron relay.     

Effect of polyvinylpyrrolidone and sodium dodecyl sulphate on the dispersity and fluidity of concentrated kaolinite suspension

Flow curves for the concentrated suspension of kaolinite (20 g/30 ml-medium) were obtained in the presence of polyvinylpyrrolidone (PVP) and sodium dodecyl sulphate (SDS) by means of a Couette-type rotary viscometer. The flow curves were Newtonian or non-Newtonian, depending on the concentration of PVP and SDS added. From these curves, the plastic viscosity (_PL) and Bingham yield value (F₀) were obtained. The relative viscosity (_rel) of _PL with respect to the medium viscosity (₀) were calculated and the contour lines for F₀ and for _rel obtained as a function of the concentration of SDS and PVP added. The feature of these contour lines was qualitatively similar to that for the mean diameter (d_m) of the secondary particles in a dilute suspension of kaolinite. It was concluded that both the increase in d_m in the dilute suspension and the increase in _rel and F₀ in the concentrated suspension were brought about by the interparticle bridging effect of PVP. The increase in_rel was due to the formation of bulky flow units of large void volume. The increase in F₀ reflected the growth of gel structure caused by the bridging effect. It was shown that PVP behaved as a flocculating agent at lower concentrations, but behaved as a dispersing agent at higher concentrations, while SDS at any concentration behaved as a dispersing agent for kaolinite suspension.Dedicated to Professor Dr. Dr. h. c. Armin Weiss on the occasion of his 60th birthday.