Flow-injection photometric determination of manganese(II) based on its catalysis of the periodate oxidation of N,N'-bis(2-hydroxy-3-sulfopropyl)tolidine

A novel flow-injection spectrophotometric method has been developed for the determination of manganese(II) at sub-nanogram/ml levels. The method is based on its catalytic effect on the oxidation of N,N′-bis(2-hydroxy-3-sulfopropyl)tolidine (HSPT) by periodate. The catalytic effect of manganese(II) was enhanced by the presence of 2,2′-bipyridine as an activator. By monitoring the change in absorbance of the oxidation product of HSPT at 670 nm, manganese(II) ranging 0.02-3.0 ng ml⁻¹ could be determined with the relative standard deviations of less than 2%. The interfering ions were effectively suppressed by the addition of 2,2′-iminodiethanol and citric acid. The proposed method is directly applicable to the determination of manganese in lake and river water samples.     

Catalytic flow injection determination of vanadium by oxidation of N-(3-sulfopropyl)-3,3',5,5'-tetramethylbenzidine using bromate

A catalytic flow-injection (FI) method was developed for the determination of 10⁻⁹ mol l⁻¹ levels of vanadium(IV, V). The method is based on the catalytic effect of vanadium(V) on oxidation of N-(3-sulfopropyl)-3,3′,5,5′-tetramethylbenzidine (TMBZ·PS) using bromate as oxidant to form a yellow dye (λ_max=460 nm). The use of 5-sulfosalicylic acid (SSA) as an activator enhanced the sensitivity of the method. The calibration graphs with a working range 0.05–8.0 ng ml⁻¹ were obtained for vanadium(V). Vanadium(IV) was also determined, being oxidized by bromate. The detection limit (signal/noise, S/N=3) was 0.01 ng ml⁻¹ (ca. 2×10⁻¹⁰ mol l⁻¹) vanadium. The relative standard deviations (R.S.D.) for 15 determinations of 0.5 ng ml⁻¹ vanadium, and for ten determinations of 0.1 and 1.0 ng ml⁻¹ vanadium were 0.41, 2.6 and 0.25%, respectively, with a sampling rate of 15 samples h⁻¹. The proposed method was successfully applied to the determination of vanadium in natural waters.     

Flow-injection spectrophotometry of manganese by catalysis of the periodate oxidation of 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)

A sensitive flow-injection spectrophotometric procedure is proposed for the determination of manganese(II), based on its catalytic effect on the oxidation of 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) with periodate. By monitoring the change in absorbance of the oxidation product of ABTS at 415 nm, manganese(II) in the range 0.05–1.0 ng ml⁻¹ can be determined with a sampling frequency of 30 h⁻¹. A relative standard deviation (R.S.D.) (n=10) is 1.6% at the 0.5 ng ml⁻¹ level. The proposed method suffers from few interferences and has been successfully applied to the determination of manganese in river, lake and seashore water samples.     

A lead(II)-selective PVC membrane based on a Schiff base complex of N,N'-bis(salicylidene)-2,6-pyridinediamine

PVC membrane electrodes for lead ion based on N,N’-bis(salicylidene)-2,6-pyridinediamine as membrane carrier were prepared. Among their membranes, a membrane electrode (m-3) containing o-NPOE as a plasticizer and 50 mol% additive displays an excellent Nernstian response (29.4 mV/decade) and the limit of detection of −log a (M) = 6.04 to Pb²⁺ in Pb(NO₃)₂ solutions at room temperature. It has a rapid response time within 10 s over the entire concentration range. The proposed electrode revealed good selectivity and response for Pb²⁺ over a wide variety of other metal ions in a pH 5.0 buffer solutions, and good reproducibility of base line in subsequent measurements.     

Kinetic-spectrophotometric determination of traces of vanadium(V) by its catalytic effect on the oxidation of 1,4-dihydroxyphthalimide dioxime with bromate

A kinetic-spectrophotometric method for the determination of trace amounts of vanadium(V) is described. It is based on the catalytic action of this ion on the oxidation of 1,4-dihydroxyphthalimide dioxime by bromate, which yields a red-violet product in acidic medium. The reaction is followed spectrophotometrically by measuring the rate of change in absorbance at 500 nm and 30°C. Using several kinetic methods (tangent, fixed-time and fixed-absorbance), vanadium(V) in the range 10–400 ng ml^?1 can be determined. The proposed methods are hardly subject to interferences. The tangent method was used for the determination of vanadium in atmospheric particulate matter, human serum and synthetic mixtures. The kinetic parameters of the catalysed and uncatalysed reactions are reported.     

Flow-injection catalytic spectrophotometic determination of molybdenum(VI) in plants using bromate oxidative coupling of p-hydrazinobensenesulfonic acid with N-(1-naphthyl)ethylenediamine

A novel flow-injection spectrophotometry has been developed for the determination of molybdenum(VI) at nanograms per milliliter levels. The method is based on the catalytic effect of molybdenum(VI) on the bromate oxidative coupling of p-hydrazinobenzenesulfonic acid with N-(1-naphthyl)ethylenediamine to form an azo dye (λ_max = 530 nm). Chromotropic acid (4,5-dihydroxy-2,7-naphthalenedisulfonic acid) acted as an effective activator for the molybdenum(VI)-catalyzed reaction and increased the sensitivity of the method. The reaction was monitored by measuring the change in absorbance of the dye produced. The proposed method allowed the determination of molybdenum(VI) in the range 1.0-20 ng mL⁻¹ with sample throughput of 15 h⁻¹. The limit of detection was 0.5 ng mL⁻¹ and a relative standard deviation for 10 ng mL⁻¹ molybdenum(VI) (n = 10) was 2.5%. The interfering ions were eliminated by using the combination of a masking agent and on-line minicolumn packed with cation exchanger. The present method was successfully applied to the determination of molybdenum(VI) in plant foodstuffs.     

Synthesis and characterization of a tetraruthenium butterfly cluster containing a quadruply-bridging ligand derived from an N,N′-dipyrid-2-ylurea

The tetraruthenium cluster complex [Ru₄(μ₄-κ⁴-dmpu)(CO)₁₀], H₂dmpu = N,N′-bis(6-methylpyrid-2-yl)urea, has been prepared by treating [Ru₃(CO)₁₂] with H₂dmpu in toluene at reflux temperature. An X-ray diffraction study has determined that this cluster has a butterfly metallic skeleton hold up by a doubly-deprotonated N,N′-bis(6-methylpyrid-2-yl)urea ligand (dmpu). This ligand has the pyridine N atoms attached to the wing-tip Ru atoms and the amido N atoms spanning Ru-Ru wing-edges, in such a way that the cluster has C₂ symmetry. The donor atoms of doubly-deprotonated N,N′-dipyrid-2-ylureas seem to be appropriately arranged to hold butterfly tetranuclear clusters.     

Flow-injection chemiluminescent determination of vanadium(IV) and total vanadium by means of catalysis on the periodate oxidation of purpurogallin

A flow-injection chemiluminescent (CL) method is proposed for the successive determination of nanogram levels of vanadium(IV) and total vanadium. The method is based on the catalytic effect of vanadium(IV) on the oxidation of purpurogallin by periodate to produce light emission at 4 °C. The presence of hydrogen carbonate enhanced the light emission arising from the vanadium(IV)-catalyzed reaction. Since vanadium(V) did not catalyze the CL reaction of purpurogallin, vanadium(V) was determined after being reduced to vanadium(IV) by using an on-line silver-reducing column. Calibration curves for vanadium(IV) and (V) were linear in the range 0.1–10 ng ml⁻¹ with sampling rate of about 50 h⁻¹. The limit of detection for signal-to-noise ratio of 2 was 0.05 ng ml⁻¹ and the relative standard deviations were 1.4 and 1.6% for ten determinations of 2.0 ng ml⁻¹ vanadium(IV) and (V), respectively. Interferences from metal ions could be eliminated by the use of O,O′-bis(2-aminoethyl)ethyleneglycol- N,N,N′,N′-tetraacetic acid and diphosphate as masking agents. The proposed method was successfully applied to the determination of vanadium(IV) and total vanadium in fresh water samples.     

Synthesis of 3-arylcoumarins via Suzuki-cross-coupling reactions of 3-chlorocoumarin

A convenient, new, and effective protocol for a rapid synthesis of different substituted 3-arylcoumarins is reported. The developed synthetic route involves Pd-catalyzed cross-coupling reaction, using a catalytic complex Pd-salen. Under these conditions, a series of different substituted boronic acids have been successfully reacted with a coumarin halide to afford the coupling products in good yields.     

Synthesis and analytical application of a novel tetradentate N(2)O(2) Schiff base as a chromogenic reagent for determination of nickel in some natural food samples

A novel sensitive chromogenic reagent, N,N′-bis(3-methylsalicylidene)-ortho-phenylene diamine (MSOPD), has been synthesized and used in the spectrophotometric determination of nickel. At pH 8, MSOPD can react with nickel ion at room temperature to form a 1:1 complex. The apparent molar absorptivity is 9.5 × 10⁴ l mol⁻¹ cm⁻¹ at 430 nm. Beer's low is obeyed over the range 0-1.0 × 10⁻⁵ M of nickel with a detection limit of 1.36 × 10⁻⁸ M. The relative standard deviation for measurement of 3.41 × 10⁻⁶ M nickel is 1.3% (n = 10). The method has successfully been applied to determination of trace amounts of nickel in some natural food samples.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

N,N′-Bis(aryl)pyridine-2,6-dicarboxamide complexes of ruthenium: Synthesis,structure and redox properties

Reaction of five N,N′-bis(aryl)pyridine-2,6-dicarboxamides (H₂L-R, where H₂ denotes the two acidic protons and R (R = OCH₃, CH₃, H, Cl and NO₂) the para substituent in the aryl fragment) with [Ru(trpy)Cl₃](trpy = 2,2′,2″-terpyridine) in refluxing ethanol in the presence of a base (NEt₃) affords a group of complexes of the type [Ru^II(trpy)(L-R)], each of which contains an amide ligand coordinated to the metal center as a dianionic tridentate N,N,N-donor along with a terpyridine ligand. Structure of the [Ru^II(trpy)(L-Cl)] complex has been determined by X-ray crystallography. All the Ru(II) complexes are diamagnetic, and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry on the [Ru^II(trpy)(L-R)] complexes shows a Ru(II)–Ru(III) oxidation within 0.16–0.33 V versus SCE. An oxidation of the coordinated amide ligand is also observed within 0.94–1.33 V versus SCE and a reduction of coordinated terpyridine ligand within −1.10 to −1.15 V versus SCE. Constant potential coulometric oxidation of the [Ru^II(trpy)(L-R)] complexes produces the corresponding [Ru^III(trpy)(L-R)]⁺ complexes, which have been isolated as the perchlorate salts. Structure of the [Ru^III(trpy)(L-CH₃)]ClO₄ complex has been determined by X-ray crystallography. All the Ru(III) complexes are one-electron paramagnetic, and show anisotropic ESR spectra at 77 K and intense LMCT transitions in the visible region. A weak ligand-field band has also been shown by all the [Ru^III(trpy)(L-R)]ClO₄ complexes near 1600 nm.     

Synthesis, structural and spectroscopic properties of a new Schiff base ligand N,N′-bis(trifluoromethylbenzylidene)ethylenediamine

The Schiff base compound, N,N′-bis(trifluoromethylbenzylidene)ethylenediamine (C₁₈H₁₄F₆N₂) (1), CF₃C₆H₄CHNCH₂CH₂NCHC₆H₄CF₃ has been synthesized by adding a solution of ethylenediammine (en), 0.1 mmol in chloroform to 4-(trifluoromethyl)-benzaldehyde, CF₃C₆H₄CHO (0.2 mmol) and the product was crystallized in ethanol with the mp, 109.2 °C and 75% yield. The crystal structure was investigated by a single-crystal X-ray diffraction study at 150 K. The compound crystallizes in monoclinic space group, P2₁/c with a = 9.295(3), b = 5.976(5), c = 15.204(9) Å and α = 90°, β = 96.56(5)° and γ = 90°. The crystal structure is stabilized by intermolecular CH · · · F hydrogen bonds. The asymmetric unit contains only one-half of the molecule related to the center of symmetry coinciding with C(1)-C(1′) and as a whole, the title molecule is in the staggered conformation. The phenyl rings and the CN imine bonds are co-planar. The infrared spectrum showed a sharp peak at 1640 cm⁻¹ which is typical of the conjugated CN stretching and strong peaks at 800-1400 cm⁻¹ regions are due to the C-C and C-H stretching modes. Electronic absorption spectra exhibits strong absorption in the UV region (240 nm wavelength) which have been ascribed to , and electronic transitions. The ¹H NMR spectra showed three distinct peaks at 2.5, 7.8 and 8.5 ppm which are assigned based on the splitting of resonance signals and are clearly confirmed by the X-ray molecular structure. The aromatic protons appear at about 7.8 ppm and the imine protons at 8.5 ppm. The sharp singlet at about 3.95 ppm is assigned to the CH₂-CH₂ protons. Mass spectra of the titled compound showed the molecular ion peak at m/e 372 (M⁺), and fragments at m/e 353 (M-F), 342 (M-2F), 200 (M-CF₃C₆H₄CHN), 186 (M-CF₃C₆H₄CHNCH₂).     

Probing trace Pb(2+) using electrodeposited N,N'-(o-phenylene)-bis-benzenesulfonamide polymer as a novel selective ion capturing film

A novel film modified electrode for the determination of trace lead was developed in this work. The modified electrode was prepared by the electropolymerization of N,N′-(o-phenylene)-bis-benzenesulfonamide (PBSA) as the ion capturing reagent to create the functional film. The modified electrode shows a high selectivity towards Pb²⁺ over interfering cations, e.g. Cu²⁺, Cd²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cr²⁺, and the calibration curve was linear in the concentration range of 2.0 × 10⁻⁹ to 1.0 × 10⁻⁷ M with correlation coefficient of 0.999. For 20 min accumulation, detection limit of 1.0 × 10⁻⁹ M was obtained at the signal to noise ratio of 3. Analytical availability of the modified electrode was demonstrated by the application for samples from pond water.     

Catalyst-free synthesis of functionalized dihydro-2-oxypyrroles by the reaction of enaminones and N,N′-bis(phenylmethylidene)phenylmethane

A catalyst-free and convenient approach for the preparation of substituted dihydro-2-oxypyrrole is described. This three-component reaction between primary amines, dialkyl acetylenedicarboxylate, and N,N′-bis(phenylmethylidene)phenylmethane proceeds in MeOH under reflux conditions in good to excellent yields.     

Synthesis of new fluorescent 2-(2′,2″-bithienyl)-1,3-benzothiazoles

Bithienyl-1,3-benzothiazole derivatives were synthesised by reacting various 5-formyl-5′-alkoxy- or 5-formyl-5′-N,N-dialkylamino-2,2′-bithiophenes with ortho-aminobenzenethiol in good to excellent yields. Evaluation of the fluorescence properties of these compounds was carried out. They show strong fluorescence in the 450-600 nm region, as well as high quantum yields and large Stokes’ shifts.     

Encapsulation of Pd(II) by N4 and N2O2 macrocyclic ligands: their use in catalysis and biology

New macrocyclic Schiff base Pd(II) compounds were synthesized by treating N₄ and N₂O₂ macrocycles with palladium chloride in a 1 : 1 ratio. The resulting macrocyclic compounds were characterized by elemental, IR, ¹H-NMR, ¹³C-NMR, mass, molar conductance, magnetic susceptibility, electronic spectra, and thermal analysis. These compounds were used as catalysts in the development of an efficient catalytic method for reduction of organic substrates having nitro, olefinic, acetylenic, and aldehyde groups under mild reaction conditions. The biological activities of all the macrocycles and macrocyclic Pd(II) compounds have been tested against gram positive (Bacillus subtilis and Staphylococcus aureus) and gram negative (Escherichia coli and Klebsiella pneumonia) bacteria and found to be more active than commercially available antibacterial drugs like Streptomycin and Ampicillin.     

N,N-Dichlorobis(2,4,6-trichlorophenyl)urea (CC-2) as a new reagent for the synthesis of pyrimidone and pyrimidine derivatives via Biginelli reaction

A simple and efficient method for the synthesis of 3,4-dihydropyrimidin-2-(1H)one and benzo[4,5]imidazo/thioazo[1,2-a]pyrimidine derivatives has been described using N,N′-dichlorobis(2,4,6-trichlorophenyl)urea (CC-2) as a new reagent. This method is found to be efficient and convenient for the synthesis of pyrimidone and pyrimidine derivatives.     

N,N′-bis(salicylidene)propane-1,2-diamine lanthanide(III) coordination polymers: Synthesis, crystal structure and luminescence properties

Reaction of Ln(NO₃)₃·6H₂O with H₂L [H₂L=N,N′-bis(salicylidene)propane-1,2-diamine] gives rise to five new coordination polymers, viz. [Pr(H₂L)(NO₃)₃(MeOH)]_n (1) and [Ln(H₂L)_1.5(NO₃)₃]_n [Ln=La (2), Eu (3), Sm (4) and Gd (5)]. Crystal structural analysis reveals that H₂L effectively functions as a bridging ligand forming one-dimensional (1D) chain and two-dimensional (2D) open-framework polymers. Solid-state fluorescence spectra of 3 and 4 exhibit typical red fluorescence of Eu(III) and Sm(III) ions at room temperature while 2 emits blue fluorescence of ligand H₂L. The lowest triplet level of ligand H₂L was calculated on the basis of the phosphorescence spectrum of 5. The energy transfer mechanisms in the lanthanide polymers were described and discussed.