Enhanced electrochemical sensing of nitric oxide using a nanocomposite consisting of platinum-tungsten nanoparticles,reduced graphene oxide and an ionic liquid

We describe a high-performance nitric oxide (NO) sensor by using a nanocomposite consisting of platinum-tungsten alloy nanoparticles, sheets of reduced graphene oxide and an ionic liquid (PtW/rGO-IL) that was deposited onto the surface of a glassy carbon (GC) electrode. The modified GC electrode exhibits excellent electrocatalytic activity toward the oxidation of NO with a strong peak at 0.78 V vs. Ag/AgCl due to the synergistic effects of bimetallic PtW nanoparticles, reduced graphene oxide nanosheets and an ionic liquid. The sensor possesses a detection limit as low as 0.13 nM, high sensitivity (3.01 μA μM^?1 cm²), and good selectivity over electroactive interferents that may exist in biological systems. The sensor was tested to selectively distinguish NO in actual human serum and urine samples, confirming potential practical applications. In our perception, the approach described here may be extended to the fabrication of various kind of composites made from metal nanostructures, graphene and ionic liquids for medical and environmental analysis.

Open image in new window

Graphical abstract Enhanced electrochemical sensing of nitric oxide (NO) is demonstrated by utilizing the synergistic effects of bimetallic PtW nanoparticles dispersed on reduced graphene oxide and ionic liquid nanocomposite.

     

Sensitive determination of nitric oxide using an electrochemical sensor based on MWCNTs decorated with spherical Au nanoparticles

This paper describes the synthesis, characterisation and application of a very sensitive electrochemical sensor based on a glassy carbon electrode modified with multiwalled carbon nanotubes (MWCNTs) decorated with homogeneously distributed spherical gold nanoparticles (AuNPs). These AuNPs presented diameters ranging from 2 to 10 nm. The AuNPs were prepared directly on the MWCNTs’ surface via a synthesis using HAuCl₄ and citric acid as the reducing agent. The resulting material (Au/MWCNTs) was characterised by scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDX), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and Raman spectroscopy. The developed Au/MWCNTs sensor was used in the determination of nitric oxide (NO) in phosphate buffer solution at pH 4.4 by differential pulse voltammetry. In the potential window between 0.5 and 0.65 V, a well-defined oxidation peak was observed, whose height was proportional to the NO concentration in the solution. The Au/MWCNTs-modified electrode exhibited high sensitivity for the determination of nitric oxide, with the limit of detection being 0.21 nmol L^?1 (S/N?=?3). No significant interference was detected for nitrite and CO₂ in the NO detection. Our study demonstrated that the resultant Au/MWCNT-modified electrode can be used for nitric oxide detection in the presence of ascorbic acid, dopamine and uric acid, being potentially useful for determinations of NO in real samples. Figure

?     

Patterning cellular motility using an electrochemical technique and a geometrically confined environment

We describe herein a method for controlling the pattern of permissible cell migration and proliferation on a substrate in time and space. Using this method, a confluent monolayer of cells that is confined within a defined region is released into a neighboring region. Incorporated into the method is an electrochemical technique that uses a scanning microelectrode to draw regions on the surface of the system that thereafter can support cell migration and growth. The supporting glass substrate is patterned with regions of 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer that are not affected by the electrochemical treatment and also robustly resist cellular overgrowth as well as regions that can be individually switched when electrochemically treated from cell repellent to cell adhering. It is therefore possible to strictly define the areas into which cells can migrate. We found that HeLa cells migrate more rapidly as the width of cell-adhering lanes increases until a width of ca. 50 microm is reached, at which point the migration rate is roughly constant. We also designed a drug assay using our cell migration technique. The technique allows for cell migration only into defined region(s) and therefore may become an important tool for evaluating the biological activity of potential drugs because drug activity and cell motility often directly correlate.     

Sensitive and selective detection of nitric oxide using an H-NOX domain

Tt Y140F, a mutant of the H-NOX (Heme-Nitric Oxide or OXygen binding domain) protein from Thermoanaerobacter tengcongensis, is presented as a novel genetically encoded NO sensor. Tt Y140F is easily purified and obtained in high yields from standard E. coli expression systems. It is extremely stable as both the ferrous unligated and ferrous-nitrosyl complexes in air over a range of temperatures (up to 70 degrees C) without oxidizing, denaturing, or binding O2. NO binding is quantitative and can be followed using simple absorbance spectroscopy. In theory, NO concentrations between 300 nM and 30 muM can be accurately and easily detected.     

Fast, sensitive and cost-effective detection of nerve agents in the gas phase using a portable instrument and an electrochemical biosensor

The nerve agents are chemical warfare agents known to be used during terrorist attacks. An inexpensive and portable system to be used by first responders and military personnel is of interest owing to the continuing threat of possible terrorist attacks. Amperometric biosensors based on cholinesterase inhibition show such potentialities. In this work butyrylcholinesterase was immobilized onto screen-printed electrodes modified with Prussian blue and the nerve agent detection was performed by measuring the residual activity of enzyme. The optimized biosensor was tested with sarin and VX standard solutions, showing detection limits of 12 and 14 ppb (10% of inhibition), respectively. The enzymatic inhibition was also obtained by exposing the biosensors to sarin in gas phase. Two different concentrations of sarin gas (0.1 and 0.5 mg m⁻³) at different incubation times (from 30 s up to 10 min) were tested. It is possible to detect sarin at a concentration of 0.1 mg m⁻³ with 30-s incubation time, with a degree of inhibition of 34%, which match the legal limits (immediate danger to life and health).     

Simultaneous,real-time measurement of nitric oxide and oxygen dynamics during cardiac ischemia-reperfusion of the rat utilizing sol-gel-derived electrochemical microsensors

In this study, we simultaneously measured nitric oxide (NO) and oxygen (O₂) dynamics in the myocardium during myocardial ischemia-reperfusion (IR) utilizing sol-gel modified electrochemical NO and O₂ microsensors. In addition, we attempted to clarify the correlation between NO release in the ischemic period and O₂ restoration in the myocardium after reperfusion, comparing a control heart with a remote ischemic preconditioning (RIPC)-treated heart as an attractive strategy for myocardial protection. Rat hearts were randomly divided into two groups: a control group (n = 5) and an RIPC group (n = 5, with RIPC treatment). Myocardia that underwent RIPC treatment (182 ± 70 nM, p < 0.05) released more NO during the ischemic period than those of the control group (63 ± 41 nM). The restoration value of oxygen tension (pO₂) in the RIPC group significantly increased and was restored to pre-ischemic levels (92.6 ± 36.8%); however, the pO₂ of the control group did not increase throughout the reperfusion period (5.7 ± 7.5%, p = 0.001). Myocardial infarct size measurements revealed a significant decrease in cell death in the myocardium region of the RIPC group (41.44 ± 6.42%, p = 0.001) compared with the control group (60.05 ± 10.91%). As a result, we showed that the cardioprotective effect of RIPC could be attributed to endogenous NO production during the ischemic period, which subsequently promoted reoxygenation in post-ischemic myocardia during early reperfusion. Our results suggest that the promotion of endogenous formation during an ischemic episode might be helpful as a therapeutic strategy for protecting the myocardium from IR injury. Additionally, our NO and O₂ perm-selective microsensors could be utilized to evaluate the effect of drug or treatment.     

Accumulated detection of ethidium bromide using a UV-irradiated DNA film modified electrode and its application for electrochemical detection of an environmental pollutant

In this study, DNA was first fabricated on a glassy carbon electrode by UV-irradiation. Through this process, water-soluble DNA was converted into insoluble materials, and a stable DNA film formed on the electrode. Ethidium bromide (EtBr), a typical model substance for harmful chemicals having planer structure, was used as an electroactive intercalator. This allowed our group to investigate the electrochemical and accumulative behaviors of the intercalator in UV-irradiated DNA film on the electrode. The UV-irradiated, DNA film-modified electrode (UV-DNA-FE) made it possible to accumulate electroactive EtBr on the electrode and detect it after accumulation. The modified electrode was used to detect dibenzofuran (DBF) as an environmental pollutant. The measurements were successfully obtained by focusing on the variation of the electrode response of EtBr, based on the competitive reaction between EtBr and DBF for the intercalating sites of DNA. The results indicated the possibility of using UV-DNA film as a sensing mechanism.     

High-intensity fluorescence imaging and sensitive electrochemical detection of cancer cells by using an extracellular supramolecular reticular DNA-quantum dot sheath

Acting as a cage-type cellular probe, an extracellular supramolecular reticular DNA-quantum dot (QD) sheath has been developed for high-intensity fluorescence microscopy imaging and the sensitive electrochemical detection of Ramos cells. The extracellular supramolecular reticular DNA-QD sheath is constructed from layer-by-layer self-assembly of DNA-CdTe QD probes and DNA nanowire frameworks functionalized with a Ramos cell-binding aptamer. The DNA-QD sheath forms specifically and quickly on the surface of Ramos cells at physiological temperature, and the assembly of large numbers of DNA-CdTe QD probes on the surface of Ramos cells produces exceedingly high fluorescence intensity. Using the extracellular supramolecular reticular DNA-QD sheath as the cellular probe, Ramos cells can be clearly observed and easily distinguished from a mixture of multiple cancer cells by fluorescence microscopy imaging. Using the new cage-type cellular probe, a sensitive sandwich-type electrochemical strategy has also been developed to achieve accurate quantitative analysis of Ramos cells. Under the optimized conditions, Ramos cells can be detected quantitatively in a range from 10 to 1000 cells with a detection limit of 10 cells. This strategy presents a promising platform for highly sensitive and convenient evaluation of cancer cell levels.     

Determination of direct orange 8 in effluent using a polypyrrole modified electrode

Electrochemical studies of direct orange 8 were carried out with a bare glassy carbon electrode (GCE) and a polypyrrole-coated GCE in aqueous acetonitrile medium using voltammetric techniques. One reversible couple around 0.3?V due to the redox reaction of the phenol group, one reduction peak around ?0.4?V due to reduction of the azo group and one oxidation peak around 1.0?V due to oxidation of the amino group were observed. Chronocoulometric studies revealed dye adsorption on the GCE. A square-wave stripping method was developed for the determination of the dye at pH 13.0, and a linear calibration equation obtained. The reproducibility in the measurement of peak currents was confirmed from the RSD value 2.8% at 0.001?mg?mL^?1 concentration. A comparison of the stripping voltammetric method with the UV-Vis spectrophotometric method was made. The determination limits are wider and the RSD value is lower in the stripping voltammetric method. The concentration of the dye present in dye effluent was determined using this method.     

Niobium oxide dispersed on a carbon-ceramic matrix, SiO2/C/Nb2O5, used as an electrochemical ascorbic acid sensor

A film of niobium oxide was immobilized on a SiO₂/C carbon-ceramic matrix (specific surface area 270 m² g⁻¹) and characterized by N₂ adsorption-desorption isotherms, scanning electron microscopy, X-ray photoelectron spectroscopy and atomic force microscopy. This new carbon-ceramic material, SiO₂/C/Nb₂O₅, was used for construction of electrodes, and it shows ability to improve the electron-transfer between the electrode surface and ascorbic acid. The electrocatalytic oxidation of ascorbic acid was made by differential pulse and cyclic voltammetry techniques, making it potentially useful for developing a new ascorbic acid sensor.     

Dual electrochemical microsensor for simultaneous measurements of nitric oxide and oxygen: Fabrication and characterization

A planar-type amperometric dual microsensor was developed for the simultaneous measurement of the nitric oxide (NO) and oxygen (O₂) concentrations. The sensor (overall diameter = 500 μm) consisted of a dual working electrode (WE) containing two platinized platinum microdisks (25 μm diameter, WE1, WE2, distance between two disks > 330 μm) and a Ag/AgCl wire reference electrode covered with an expanded poly(tetrafluoroethylene) gas-permeable membrane. The differentiation and concurrent measurements of NO and O₂ were obtained successfully using two sensing WEs with different applied potentials (+0.75 V for WE1 and −0.4 V for WE2). Cross-talk between WE1 and WE2 was eliminated with an optimized internal solution composition. Linear dynamic range, selectivity, sensitivity, detection limit (<5 nM for NO; <500 nM for O₂), and stability (>50 h) were evaluated.     

Selective ethylene formation by pulse-mode electrochemical reduction of carbon dioxide using copper and copper-oxide electrodes

Although the electrochemical reduction of carbon dioxide (CO₂) with a copper electrode produces hydrocarbons, the activity toward the conversion of CO₂ is lost for several 10 min by the deposition of poisoning species on the electrode. To solve the poisoning species problem, the electrochemical reduction of CO₂ was carried out using a copper electrode with a pulse electrolysis mode with anodic as well as cathodic polarization. The anodic polarization intervals suppressed the deposition of poisoning species on the electrode, and the amount of two hydrocarbons, CH₄ and C₂H₄, barely decreased even after an hour. By choosing appropriate anodic potential and time duration, the selectivity for the C₂H₄ formation was greatly enhanced. The enhancement was found to be due to the copper oxide formed on the copper electrode. The selectivity was further improved when the electrochemical reduction was made with the copper-oxide electrode. The highest efficiency of about 28% is obtained at −3.15 V.     

Atrazine analysis using an amperometric immunosensor based on single-chain antibody fragments and regeneration-free multi-calibrant measurement

This work describes the development of an electrochemical immunosensor for the analysis of atrazine using recombinant single-chain antibody (scAb) fragments. The sensors are based on carbon paste screen-printed electrodes incorporating the conducting polymer polyaniline (PANI)/poly(vinylsulphonic acid) (PVSA), which enables direct mediatorless coupling to take place between the redox centres of antigen-labelled horseradish peroxidase (HRP) and the electrode surface. Competitive immunoassays can be performed in real-time using this separation-free system. Analytical measurements based on the pseudo-linear relationship between the slope of a real-time amperometric signal and the concentration of analyte, yield a novel immunosensor set-up capable of regenerationless amperometric analysis. Multiple, sequential measurements of standards and samples can be performed on a single scAb-modified surface in a matter of minutes. No separation of bound and unbound species was necessary prior to detection. The system is capable of measuring atrazine to a detection limit of 0.1 ppb (0.1 μg l⁻¹). This system offers the potential for rapid, cost-effective immunosensing for the analysis of samples of environmental, medical and pharmaceutical significance.     

Co(salen)/Nafion修饰电极对天然海水中一氧化氮的催化氧化及其测定

用Co(salen)/Nafion修饰铂电极对天然海水介质中的一氧化氮进行了测定,在最佳实验条件下,确定了Co(salen)/Nafion修饰电极的检出限是0.1 μmol/L,线性范围分别为0.1～1.0和1.0～9.9 μmol/L,相对标准偏差为0.24%,并且探讨了Co(salen)对NO的催化机理.     

First electrochemical investigation of organophosphorus pesticide azametiphos and its quantification using electroanalytical approach

ABSTRACT

In this work, the electrochemical behaviour and the subsequent development of an analytical procedure for quantification of pesticide azamethiphos, using boron-doped diamond (BDD) electrode are reported for the first time. It was found that azamethiphos electrochemical behaviour is irreversible oxidation at the potential of around 1.70 V, in 1 M nitric acid (pH 0). Also, it was found that potential of this oxidation was not pH dependent which can be attributed to the no proton involvement in electrochemical reaction on the electrode surface. The square wave voltammetric method was most appropriate for azamethiphos quantification. Under optimised experimental conditions, linear working range from 2 to 100 µM was estimated with the detection limit of 0.45 µM. Negligible effect of the possible interfering compound was observed. The obtained results show that the developed analytical methodology can be an adequate replacement for the, up to date, used methods for detection of organophosphorous pesticide.     

Evaluation of antioxidative capacity via measurement of the damage of DNA using an electrochemical biosensor and an ionic liquid solvent

We report on the electrodeposition of palladium nanomaterials in choline chloride–based ionic liquid ethaline. A glassy carbon electrode (GCE) was modified with cobalt nanoparticles (acting as sacrificial templates) and a GCE modified with palladium nanoparticles (PdNPs) were fabricated and used to study the electrocatalytic oxidation of hydrazine (N₂H₄). Scanning electron microscopy revealed that the PdNP modified GCE has a uniform morphology. Zero current potentiometry was used for in-situ probing the changes in interfacial potential of the oxidation of hydrazine. An amperometric study showed that the PdNP modified GCE possesses excellent electrocatalytic activity towards N₂H₄. The modified electrode displays a fast response (<2 s), high sensitivity (74.9 μA m(mol L^?1)^?1?cm^?2) and broad linearity in the range from 0.1 to 800 μmol L^?1 with a detection limit of 0.03 μmol L^?1 (S/N?=?3).

Recent advances in nanomaterial-based electrochemical sensing of nitric oxide and nitrite for biomedical and food research

Nitric oxide (NO) and nitrite are of significant importance in clinical/biomedical research and in quality control applications for the food industry. Electrochemical sensing of NO and nitrite has been extensively pursued over the last two years. Efficient interfaces based on functional nanomaterials and bioactive molecules (e.g. metals, metal oxides, carbon-based nanomaterials, conducting polymers, and heme proteins) have been widely explored toward sensor development. Herein, we review the most recent advances in the electrochemical sensing of NO and nitrite, while the critical roles of nanomaterials in the design of advanced electrochemical sensors are highlighted.     

Study on the electrochemical behavior and differential pulse voltammetric determination of rhein using a nanoparticle composite film-modified electrode

A sensitive electrochemical method was developed for the differential pulse voltammetric determination of rhein at a glassy carbon electrode (GCE) modified with a nanoparticle composite film. In the present paper, multi-wall carbon nanotube (MWNT) was dispersed into dihexadecyl phosphate (DHP) to give a homogeneous suspension. After the solvent evaporation, a uniform film of MWNT-DHP composite film was obtained on the GCE surface. The MWNT-DHP composite film-modified GCE exhibited excellent electrocatalytic behavior toward the redox of rhein. Compared with an irreversible reduction of rhein at the bare GCE, a reversible redox behavior of rhein was observed at the MWNT-DHP composite film-modified GCE and the redox current was also enhanced greatly. Based on this, a cathodic differential pulse voltammetry (DPV) was applied for the determination of rhein. The experimental parameters, which influence the current of rhein, were optimized. Under optimal conditions, the cathodic DPV measurements were performed and a linear response of rhein was obtained in the range from 1.0 x 10(-8) to 5.0 x 10(-6) mol L(-1) and with a limit of detect (LOD) of 5.0 x 10(-9) mol L(-1). The proposed procedure was successfully applied to assay rhein in real samples with satisfactory results.