Coulometric generation of protons by oxidation of hydrogen dissolved in palladium, in non-aqueous media

Coulometric generation of H(+) ions by the oxidation of hydrogen dissolved in palladium, in media such as acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, acetic anhydride and acetic acid-acetic anhydride mixture, for use in titration of bases, has been investigated. The hydrogen is oxidized at potentials which are much more negative than those of the bases and other components present in the solution. Titrations of numerous bases have established that the oxidation is quantitative and proceeds with 100% current efficiency.     

The application of deuterium-palladium electrodes in the coulometric-potentiometric determination of bases in ketone media

The application of deuterium-palladium electrodes as generator, indicator and reference electrodes for the determination of organic bases in acetone and methyl ethyl ketone has been investigated. Deuterium dissolved in palladium is oxidized at a potential that is close to the oxidation potential of hydrogen in palladium and more negative than the oxidation potentials of the bases titrated, indicator, and the solvents used. The anodic oxidation of deuterium dissolved in palladium proceeds with 100% current efficiency in the solvents investigated. The relative errors for the determination of 5 x 10(-4)M solutions of bases are less than 1%.     

the extraction of some metallic bromides from aqueous solutions with methyl ethyl ketone and methyl iso-butyl ketone

The extraction of the following metals from aqueous solutions containing excess bromide with methyl ethyl ketone (MEK), and methyl isobutyl ketone MIBK has been investigated:—Cu(I), Cu(II), Zn(II), Ni(II), Co(II), Fe(II), Fe(III), Al(III), Mn(II), Sn(II) and Sn(IV). The use of MEK was found to be strictly limited by its solubility in acidic aqueous solutions. Determinations of the formulae of the extracted compounds were attempted in two cases but were found to be not wholly satisfactory and were discontinued. An interesting reaction between the cupric bromide complex and the solvents was noticed. Separations of Fe(IIl) from Mn(II), Fe(III) from Al(III), Fe(III) from Co(Il) and Fe(III) from Ni(II) could be achieved under suitable conditions.     

Coulometric generation of hydrogen ions by oxidation of mercury in anhydrous acetone

The application of a mercury anode for the quantitative generation of H(+) ions in anhydrous acetone has been investigated. From the changes of anode potential with current density in 0.25M sodium perehlorate in anhydrous acetone it has been established that in this solvent mercury is oxidized at a potential which is much more negative than the oxidation potentials of the bases to be titrated, the indicator used and the solvent. Protons generated in this way have been used for titration of some organic bases, with either visual or potentiometric end-point detection. The oxidation of mercury in anhydrous acetone and the reaction of mercury ions with acetone have been found to proceed with 100% current efficiency.     

Coulometric generation of acetylions by oxidation of mercury in acetic anhydride and in acetic acid/acetic anhydride mixture

Coulometric generation of acetyl (CH₃CO⁺) ions by oxidation of mercury in acetic anhydride and in acetic acid/acetic anhydride (5:95, v/v) is described. Current/potential curves for solvents, titrated bases, indicator and mercury showed that in both these solvents mercury is oxidized at potentials which are much more negative than those for the titrated bases and other components present in the solution. Quinoline, triethanolamine, triethylamine, pyridine and quinolin-8-ol in acetic anhydride, as well as triethylamine, 2,2′-bipyridine, 2,4,6-collidine, pyridine and sodium acetate in acetic acid/acetic anhydride were titrated with acetyl ions generated by the oxidation of mercury. In this way, it was established that the oxidation of mercury to mercury (I) ions proceeds quantitatively with 100% current efficiency.     

Radiochemical solvent extraction of Au(III) using thionalide in ethyl methyl ketone/iso buthyl methyl ketone

A radiochemical method for the determination of gold using¹⁹⁸Au, has been developed. It is based on the synergistic extraction of Au(III) with thionalide (TA) in ethyl methyl ketone (EMK) or isobuthyl methyl ketone (IBMK) at pH 5.0.Effect of various parameters such as pH, nature of solvent and interferences due to other radionuclides have been studied. The method can be used up to 25 ng of Au.     

Kinetics and mechanism of oxidation of acetone,ethyl methyl ketone and diethyl ketone with chloramine-T in hydrochloric acid medium

The kinetics of oxidation of aliphatic ketones (acetone, ethyl methyl ketone and diethyl ketone) by chloramine-T in presence of hydrochloric acid (0.1 to 0.3M) have been investigated at 30 °C. The rate of disappearance of chloramine-T has been found to be first order each with respect to oxidant, ketone and [H⁺], in the range of the acid concentrations studied. The thermodynamic and kinetic parameters have been evaluated by determining the rate constants at different temperatures. The products of the reaction have been identified as chloroketones by their NMR spectra. The solvent isotope effect has been studied in the case of the oxidation of acetone and ethyl methyl ketone. A mechanism has been proposed.     

Coulometric generation of H+ ions by anodic oxidation of esters of gallic acid,phenols and ascorbic acid in propylene carbonate

The application of esters of gallic acid (methyl, ethyl, propyl, butyl, octyl and dodecyl gallate), phenols (pyrocatechol and pyrogallol) and ascorbic acid for the coulometric generation of H⁺ ions in propylene carbonate, is described. The current-potential curves recorded for these depolarizers, titrated bases, indicator and the solvent used showed that the investigated depolarizers are oxidized at lower potentials than the oxidation potentials of other components in the solution H⁺ ions formed by the oxidation of these depolarizers were used for the titration of organic bases (pyridine, piperidine and quinoline) with visual and potentiometric end-point detection. The current efficiency was 100%.     

The extraction of ferric chloride with methyl isobutyl ketone and amyl acetate

Summary The extraction of iron as ferric chloride in 7 M hydrochloric acid by a mixture of (1+1) or (2+1) methyl isobutyl ketone and amyl acetate is quantitative for macro as well as for micro amounts of iron. The distribution ratio is very high ( 4000). With these mixtures no emulsification difficulties are encountered as they are with methyl isobutyl ketone alone. The behaviour of 44 elements in this extraction has been investigated.     

(Liquid + liquid) equilibria of (water + propionic acid + methyl isoamyl ketone or diisobutyl ketone or ethyl isoamyl keton) at T = 298.2 K

(Liquid + liquid) equilibrium (LLE) data for (water + propionic acid + solvent) were measured at T = 298.2 K and atmospheric pressure. The solvents were methyl isoamyl ketone (5-methyl-2-hexanone), ethyl isoamyl ketone (5-methyl-3-heptanone) and diisobutyl ketone. The tie-line data were correlated by means of the NRTL and UNIQUAC equation, and compared with results predicted by the UNIFAC method. A comparison of the extracting capabilities of the solvents was made with respect to distribution coefficients, separation factors, and solvent free selectivity bases.     

Equilibrium and kinetics of Zn(II) bromide extraction with Amberlite LA-2 and methyl isobutyl ketone

The rates of extraction of Zn(II) from hydrobromic acid solutions into benzene solutions of the liquid anion exchanger Amberlite LA-2 and those into methyl isobutyl ketone (MIBK) have been investigated. The distribution equilibria of this system have been also studied. Under the used experimental conditions the extracted species of Zn(II) have been proposed. The kinetic data indicated a first order reaction with respect to Zn(II) in both systems, nearly one with respect to HBr and from 0–0.38 for LA-2. In case of extraction of Zn(II) with methyl isobutyl ketone, MIBK, the reaction order with respect to MIBK was found to be 4 and with respect to HBr inverse first order. The rate constants of these extraction processes were determined and the rate determining steps were discussed in the light of the obtained results.     

Simultaneous determination of odorous volatile organic compounds with gas chromatography and a thermal desorber: A case study on methyl ethyl ketone, methyl isobutyl ketone, butyl acetate, toluene, and xylene

In this study, a series of experiments were conducted to examine the feasibility of the gas chromatographic approach for the quantification of several odorous volatile organic compounds (VOCs) in environmental samples which included methyl ethyl ketone, isobutyl alcohol, methyl isobutyl ketone, and butyl acetate plus benzene, toluene, and xylene (namely, BTX). The gaseous working standards (WS) of seven compounds were initially calibrated at varying concentration ranges by direct injection (DI) into GC injector. The detection properties of these compounds were then tested with a thermal desorber (TD). The relative sensitivities of three aromatic VOCs differed greatly between DI and TD methods. In contrast, four polar VOCs tend to consistently exhibit relative enhancement in response factors with increasing molecular mass (an exception of butyl acetate), regardless of method. The TD-based analysis was reliable enough to detect all target VOCs below their odor threshold values with their detection limit (DL) values. This TD method, when tested against a number of environmental samples collected from several industrial facilities, confirmed the presence of these odorous VOCs at a wide concentration range.     

Coulometric generation of H+ ions by oxidation of thiols at a platinum anode and by oxidation of mercury in acetic acid—acetic anhydride

The coulometric generation of hydrogen ions by anodic oxidation of propane-1-thiol, butane-1-thiol, 2-mercaptopropionic acid, heptane-1-thiol, 2-mercaptoethanol, methyl and ethyl thioglycollate and p-thiocresol in acetic acid—acetic anhydride (1 + 6 v/v) is described, together with the possibility of coulometric generation of protons by mercury oxidation in the presence of p-thiocresol in the same solvent system.Current-potential curves for the solvent, indicator, titrated bases, mercury and the investigated thiols showed that in acetic acid—acetic anhydride (5 + 95, v/v), mercury and the investigated thiols are oxidized at potentials which are much more negative than those of the titrated bases and other components present in the solution.Titration of potassium hydrogenphthalate and sodium acetate with protons generated by the oxidation of thiols, and of sodium acetate, lithium acetate and pyridine with protons generated by the oxidation of mercury, demonstrated that the oxidation of both thiols and mercury proceeds quantitatively with 100% current efficiency.     

Extraction of vanadium into isobutyl methyl ketone

Because of its advantages in atomic-absorption spectroscopy, isobutyl methyl ketone was chosen as organic solvent for an extraction study on vanadium. Of eight chelating agents which were evaluated for completeness of extraction, ease of use, working pH range, and freedom from interference, cupferron was judged best.     

Ultrasonic velocities and isentropic compressibilities of N-methyl-2-pyrrolidone with ketones and branched alcohols at 303.15 K

The ultrasonic sound velocities and densities are measured for the binary mixtures of N-methyl-2-pyrrolidone (NMP) with ketones and branched alcohols at 303.15?K. The ketones include methyl ethyl ketone, methyl propyl ketone, diethyl ketone, methyl isobutyl ketone and cyclohexanone. The branched alcohols include 2-propanol, 2-methyl-1-propanol, 3-methyl-1-butanol, 2-butanol and 2-methyl-2-propanol. The ultrasonic sound velocity data were used to compute isentropic compressibilities (k _s). The deviations in the value of k _s from ideal value were computed. Except cyclohexanone all the binary mixtures formed by NMP with ketones at 303.15?K exhibit negative deviation from ideal behaviour over the entire range of composition. Cyclohexanone with NMP exhibit positive deviation over the entire range of composition. An inversion in the sign of Δk _s from positive to negative was observed for 2-propanol system and negative deviation was observed in four binary mixtures formed by NMP with other branched alcohols at 303.15?K. The ultrasonic sound velocities of these mixtures have been analysed is terms of Free Length Theory (FLT), Collision Factor Theory (CFT) and Nomoto's relation.     

Mutual effects of metals in extractions from fluoride solutions with oxygen-containing solvents

The simultaneous extraction of niobium, zirconium and tantalum from hydrofluoric ncid solutions with oxygen-containing solvents has been studied. When solvents of relatively high dielectric constant- tributyl phosphate. methyl isobutyl ketone and cyclohexanone -are used. the extration of micro amounts of niobium and zirconium is suppressed by the presence of macro amounts of tantalum. This suppression of extraction in the presence of tantalum is also evident with solvents of low polarity, such as diethyl and diisopropyl others, but with these solvents, zirconium is co-extracted with niobium. One of the principal causes of these mutual influences of metals is dissociation and association of the compounds extracted in the organic phase. The formation of mixed ion associated in the extract allows co-extraction of one metal with another. Conversely, the dissociation of complex acids in the organic phase causes suppression of extraction of micro elements by the common ion effect.     

Multifunctional catalysis by Pd-polyoxometalate: one-step conversion of acetone to methyl isobutyl ketone

Pd metal supported on Cs2.5H0.5PW12O40 is an efficient bifunctional catalyst for the one-step conversion of acetone to methyl isobutyl ketone in gas and liquid phase.     

Aza-Baylis-Hillman reaction of salicyl N-tosylimines with methyl vinyl ketone, ethyl vinyl ketone or phenyl vinyl ketone

Reactions of salicyl N-tosylimines with methyl vinyl ketone, ethyl vinyl ketone or phenyl vinyl ketone proceeded smoothly under mild conditions to give the corresponding chromanes or aza-Baylis-Hillman adducts in moderate to excellent yields in the presence of phosphine or nitrogen Lewis base.     

Photodegradation in solution of copolymers of methyl vinyl ketone and methyl isopropenyl ketone with methyl methacrylate

Copolymers of methyl vinyl ketone (MVK) and methyl isopropenyl ketone (MIK) with methyl methacrylate (MMA), have been prepared covering the whole composition range. Reactivity ratios have been estimated as follows: MMA/MVK, r_MMA = 0·63 ± 0·2, r_MVK = 0·53 ± 0·2; MMA/MIK, r_MMA = 0·98 ± 0·2, r_MIK = 0·69 ± 0·2. Number average molecular weights have been measured during the course of photodegradation under 253·7 nm radiation in methyl acetate solution and rates of chain scission calculated. In each system the copolymers are less stable than the corresponding homopolymers, the rate passing through a maximum at 20–30% ketone content. These results have been discussed from a mechanistic point of view.     

Separation of99mTc from parent99Mo by solid-phase column extraction as a simple option for a new99mTc generator concept

Evidence is obtained to show that the liquidliquid extraction separation of^99mTc from⁹⁹Mo with methyl ethyl ketone, methyl propyl ketone and methyl isobutyl ketone can be transformed into a solid-phase column extraction procedure. The aqueous alkaline⁹⁹molybdate solution is immobilized on a column of a granular large-pore diatomaceous earch support, which is the neluted with the abovementioned extractants. Rapid and clean separation of^99mTc can be with all three solvents. The^99mTc can be back-extracted from the organic phase on a column filled with distilled water /or saline/ loaded granular diatomaceous earth /Extrelut^®/. The possibility of using the abovementioned procedure as a basis for a new^99mTc/⁹⁹Mo generator concept is envisaged.