Sensitive fluorimetric method for the determination of aniline by using tetra-substituted amino aluminium phthalocyanine

This is the first report of the determination of aniline with tetra-substituted amino aluminium phthalocyanine (TAAlPc) by a fluorimetric method. In KBr-HCl solution, nitrite ion diazotizes TAAlPc, thus, the fluorescence of TAAlPc is dramatically quenched. However, there is less quenching in the presence of aniline and the recovery in fluorescence intensity is linear with the concentration of aniline. Based on this, a novel method has been developed for the determination of aniline in aqueous solutions. Under the optimal conditions, the calibration graph for aniline is from 5 to 300 ng ml⁻¹ with a 3σ limit of detection of 1.8 ng ml⁻¹. The relative standard deviation for nine replicate measurements of 100 ng ml⁻¹ aniline is 1.7%. The method was applied to the analysis of water samples with satisfactory results.     

Chemiluminescence determination of barbituric acid using Ru(phen)(3)(2+)-Ce(IV) system

A chemiluminescence (CL) method for the determination of barbituric acid (BA) was proposed, which is based on the enhancement of BA to the CL intensity of Tris-(1,10-phenanthroline)ruthenium(II) (Ru(phen)₃²⁺)-cerium(IV) (Ce(IV)) system. The concentration of BA is proportional to the CL intensity in the range of 5.0×10⁻³-2.0 μg ml⁻¹. The detection limit is 6.9×10⁻⁴ μg ml⁻¹. The relative standard deviation (R.S.D.) of determining 11 samples containing 0.20 μg ml⁻¹ BA is 3.2%. This CL method has been successfully applied to the determination of BA in the synthetic samples. The mechanism of CL reaction was studied.     

Fluorimetric determination of mebendazole and flubendazole in pharmaceutical dosage forms after alkaline hydrolysis

The selective and very sensitive fluorimetric determination of mebendazole and flubendazole is based on alkaline hydrolysis and adsorption on Whatman 42 filter paper. Limits of detection are 0.1 μg ml^?1 and 0.5 μg ml^?1, respectively, with linear response sponse up to 10 μg ml^?1 and 50 μg ml^t?1. The fluorescence produced is very stable (λ_em = 460 nm) and the method is applicable to anthelmintic pharmaceutical preparations.     

Fluorimetric kinetic method for the determination of total ascorbic acid with o-phenylenediamine

A fluorimetric reaction-rate method for the determination of L-ascorbic acid (AA) in aqueous solution is presented. The technique is based on the rapid oxidation of AA by mercury(II) chloride to dehydro-L-ascorbic acid, which then reacts with o-phenylenediamine to form a fluorescent quinoxaline. The formation of the product is monitored fluorimetrically with a data acquisition system based on a microcomputer, a voltage-to-frequency converter and a timer-counter board. The initial rate is estimated with a fixed-time computational method. With a 20-s measurement time (after a 5-s delay from initiation of the reaction), the detection limit for AA is 0.02 μg ml^?1 with a linear dynamic range extending to 10 μg ml^?. The procedure is applied to the determination of the AA in vitamin pills and juice. The relative standard deviation is 1.9% or better.     

Flow injection spectrophotometric determination of europium using chlortetracycline

A flow injection (FI) spectrophotometric determination of europium (III) is described, based on the complexation between europium (III), and chlortetracycline (CTC) in a Tris-buffer pH 8.0 medium. The resulting yellow-coloured complex is measured at its absorption maximum of 400 nm after 100 μl of sample or standard solution containing europium (III) are injected into the merged streams of CTC and Tris-buffer solutions. Optimum conditions for determining μg amounts of europium (III) are achieved by univariate method. Various types of reactors are also investigated. It is shown that the use of a single bead string reactor gives rise to the enhancement of peak height. A linear calibration curve over the range of 0.10-0.60 μg ml⁻¹ europium (III) is established with the regression equation (n=6) Y=34.93X+0.01 and the correlation coefficient of 0.9994 is obtained. A detection limit (3σ) of 0.01 μg ml⁻¹ of europium (III) and the relative standard deviation (R.S.D.) of 4.32% for determining 1.0 μg ml⁻¹ of europium (III) (n=7) are obtained. The recommended method has been applied to the quantitation of europium (III) in spiked water and stream sediment samples with average recoveries of 99.9 and 97.5%, respectively. The sampling rate is found to be 85 h⁻¹.     

Spectrofluorimetric determination of formaldehyde in air after collection onto silica cartridges coated with Fluoral P

In the present work, a sensitive and selective fluorimetric method for formaldehyde determination in air samples is described. The method is based in the reaction between formaldehyde and Fluoral P producing 3,5-diacetyl-1,4-dihydrolutidine, which, when excited at 410 nm, emits fluorescence at 510 nm.The Fluoral P was prepared by the reaction of 0.3 ml of acetic acid, 0.2 ml of acetylacetone and 15.4 g of ammonium acetate. Then, the volume was completed to 100 ml with deionized water. The Fluoral P obtained, if stored under refrigeration in the dark, can be used, safely, for 60 days.The calibration curve obtained with concentrations of formaldehyde in the range of 12 to 192 ng ml⁻¹ (n=9) was Intensity=1.11C+0.06 (R²=0.9920). In the quantification of formaldehyde, air samples were passed at 1 l min⁻¹, during 120 min, through glass impingers containing 40 ml of Fluoral P, followed by direct fluorescence measuring, or through two SEP PAK silica cartridges, coated with Fluoral P. The cartridges were eluted with 10 ml of Fluoral P solution and quantified by spectrofluorimetry. Under these conditions, the detection limit (S/N=3) obtained was 2.0 ng ml⁻¹.The new methodology was validated by comparison with a well-known HPLC method in which formaldehyde was collected into SEP PAK C18 cartridges coated with 2,4 dinitrophenylhydrazine. The application of the t_95% test did not show significant differences between the HPLC and either fluorimetric methodologies.This method has been used in the determination of gas phase formaldehyde in both indoor and outdoor sites. For the indoor site, the measured concentrations were in the range of 9.0 to 67.7 μl l⁻¹, while for the outdoor site they were in the range of 16.8 to 38.8 μl l⁻¹. Further, due to the ease of handling in field studies, the SEP PAK cartridges coated with Fluoral P were used. The formaldehyde concentrations thus determined, in outdoor sites, were in the range of 2.09 to 25.1 μl l⁻¹. The main advantage of this analytical procedure is its selectivity for formaldehyde, without interferences from bisulfite and other aldehydes, especially acetaldehyde, and low blank level, resulting in low detection limits. In addition, very little sample preparation is required.     

Fluorimetric determination of nucleic acid using the enhancement of terbium-gadolinium-nucleic acid-cetylpyridine bromide system

It is found that the fluorescence intensity of Tb-cetylpyridine bromide (CPB)-nucleic acid system can be enhanced by La³⁺, Gd³⁺, Lu³⁺, Sc³⁺ and Y³⁺, of which Gd³⁺ has the greatest enhancement. The experiments indicate that under the optimum condition, the fluorescence intensity of the system is in proportion to the concentration of nucleic acids in the range from 9×10⁻⁸ to 1×10⁻⁵ g ml⁻¹ for yeast RNA, from 1×10⁻⁷ to 1×10⁻⁵ g ml⁻¹ for fish sperm DNA. The detection limits are 3.2 and 4.1 ng ml⁻¹, respectively. This method has been used satisfactorily for the determination of both synthetic and actual samples. In comparison with most fluorescence method for the determination of nucleic acids, this method has higher sensitivity and stability.     

Influence of ultrasonic waves on phosphate determination by the molybdenum blue method

Polymeric bonds between molybdate monomeric ions in acidic medium were broken by 40 kHz ultrasonic wave irradiation, improving the reaction kinetics with o-phosphate in the presence of ascorbic acid. It could be assumed that the ultrasonic wave irradiation of molybdate solution in acidic medium during 1.0 min was sufficient to increase the rate of the molybdenum blue formation. The approach was applied to the o-phosphate determination in natural waters. Precise results were obtained in the range from 0.05 to 0.50 μg ml⁻¹ (r=0.9994; N=6), and the detection limit was estimated as 0.027 μg ml⁻¹ PPO₄. Advantages over the classical analogous procedure are emphasised.     

Fluorimetric properties of a 2-hydroxypropyl-β-cyclodextrin: 9-methyl-benzo[a]phenothiazine inclusion complex in aqueous media. Analytical usefulness

The formation of an inclusion complex between 9-methyl-12H-benzo[a]phenothiazine (MeBPHT) and 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) was investigated in aqueous medium. A 12-fold fluorescence emission intensity enhancement was found for the complexed relative to the free analyte. MeBPHT forms a 1:1 stoichiometry complex with HP-β-CD. A formation constant of 460 (±100) M⁻¹ was calculated using the Benesi-Hildebrand method and fluorimetric data. The limit of detection was 7 ng ml⁻¹ for MeBPHT in the presence of HP-β-CD instead of 60 ng ml⁻¹ in the absence of HP-β-CD.     

Determination of trace concentrations of citrate in aqueous systems

A fluorimetric method for the determination of citrate is described. Through a series of reactions, citrate is converted into citrazinic acid. The ammonium salt of this compound exhibits a fluorescence maximum at 430 nm when an excitation source of 340 nm is used. The method does not suffer from the normal interferences. The limit of detection is 0.01 μg ml^-, and the best working range is 0.1–10 μg ml^-1.     

Electrochemiluminescence assay for the detection of acridinium esters

An electrochemiluminescence (ECL)-based method for rapid and sensitive detection of acridinium ester in neutral solution was described. Strong ECL emission was observed when a positive voltage over 2.0 V (versus Ag/AgCl) was applied to the working electrode (Pt) immersed in the acridinium ester solution of 2.0 mol l⁻¹ KNO₃ (pH 7.0). The possible ECL mechanism was discussed. It was proposed that the ECL emission came out of N-methylacridone, the oxidization product of acridinium ester by the nascent oxygen generated on the surface of working electrode in the course of oxidization of water. Other influenced factors including the electrochemical parameters, the ECL reaction medium and pH value, were investigated in detail. Under the optimal conditions, ECL intensity has a linear relationship with the concentration of acridinium ester in the range of 0.24-96 ng ml⁻¹ (r=0.9999). The relative standard deviation for 24 ng ml⁻¹ acridinium ester was 4.6% (n=11). The limit of detection was 0.16 ng ml⁻¹.     

Spectrophotometric flow-injection analysis of mercury(II) in pharmaceuticals with p-nitrobenzoxosulfamate

A new, simple and rapid spectrophotometric FI method for the accurate and precise determination of Hg(II) in pharmaceutical preparations has been developed. The method is based on the measuring the decrease of absorbance intensity of p-nitrobenzoxosulfamate (NBS) due to the complexation with Hg(II). The absorption peak of the NBS, which is decreased linearly by addition of Hg(II), occurs at 430 nm in 2×10⁻⁴ mol l⁻¹ HNO₃ as a carrier solution. Optimization of chemical and FI variables has been made. A micro column consisting of several packing materials applied instead of reaction coil was also investigated. A background level of Fe(III) maintained in reagent carrier solution with NBS was found useful for sensitivity and selectivity. Under the optimized conditions, the sampling rate was over 100 h⁻¹, the calibration curve obtained were linear over the range 1-10 μg ml⁻¹, the detection limit was lower than 0.2 μg ml⁻¹ for a 20 μl injection volume, and the precision [S_r=1% at 2 μg ml⁻¹ Hg(II) (n=10)] was found quite satisfactory. Application of the method to the analysis of Hg(II) in pharmaceutical preparations resulted a good agreement between the expected and found values.     

Flow-injection chemiluminescence determination of aminomethylbenzoic acid and aminophylline based on N-bromosuccinimide-luminol reaction

A novel and sensitive chemiluminescence (CL) method for the determination of aminomethylbenzoic acid and aminophylline coupled with flow-injection analysis (FIA) technique is developed in this paper. It is based on the inhibition effect of the studied drugs on the chemiluminescence emission of N-bromosuccinimide-luminol (NBS-luminol) system. Under the optimum conditions, the decreased CL intensity is linear with the concentration of aminomethylbenzoic acid in the range of 2×10⁻⁸ to 1.0×10⁻⁶ g ml⁻¹ and with the concentration of aminophylline in the range of 1×10⁻⁷ to 7.0×10⁻⁶ g ml⁻¹, respectively. The detection limit is 7.0×10⁻⁹ g ml⁻¹ for aminomethylbenzoic acid (3σ) and 3.4×10⁻⁸ g ml⁻¹ for aminophylline (3σ). The relative standard deviations (R.S.D.) for 11 parallel measurements of 2.0×10⁻⁷ g ml⁻¹ aminomethylbenzoic acid and 1.0×10⁻⁶ g ml⁻¹ aminophylline are 2.6 and 3.0%, respectively. The proposed methods have been applied for the determination of the studied drugs in their pharmaceutical formulations with satisfactory results. The possible use of the proposed system for the determination of aminomethylbenzoic acid in plasma sample was also tested. The possible inhibition mechanism of aminomethylbenzoic acid and aminophylline on luminol-NBS system was discussed briefly.     

A novel spectrofluorimetric method for the ultra trace analysis of nitrite and nitrate in aqueous medium and its application to air, water, soil and forensic samples

A highly sensitive and virtually specific method has been developed for the trace and ultra trace 5 ng ml⁻¹-1 μg ml⁻¹ fluorimetric analysis of nitrite. The method is based on the quenching action of nitrite on the native fluorescence of murexide (ammonium purpurate) [λ_ex=349.0 nm, λ_em=444.5 nm] in the acid range of 0.045-0.315 (M) H₂SO₄. The method is very precise and accurate (S.D.=±0.4877 and R.S.D.=0.4878% for the determination of 0.1 μg ml⁻¹ of nitrite in 11 replicates). Relatively large excesses of over 35 cations and anions do not interfere. The proposed technique has been successfully applied for the determination of nitrite and nitrate in ground water, surface water and sea water, nitrite in soil and nitrate in forensic samples. The method has also been extended for the analysis of NO_x in air.     

Fluorimetric assay of ergotamine

Studies on the fluorescence properties of ergotamine in water at various pH values, and in several organic solvents are described. An assay procedure for ergotamine, based on its intense fluorescence in ethanol, is presented. Extraction of ergotamine into benzene from basic aqueous solution is followed by transfer of the extract to ethanol for fluorescence determination. The plot of fluorescence intensity vs. concentration is linear up to 5 μg ml^?1, and the assay has a limit of detection of 0.002 μg ml^?1. Reproducibility data at the 2.5-μg ml^?1 level are given.     

Kinetic spectrophotometric determination of trace manganese (II) with dahlia violet in nonionic microemulsion medium

A new catalytic kinetic spectrophotometric method has been developed for the determination of trace amount of manganese (II) in nonionic microemulsion medium. The method is based on the catalytic effect of manganese (II) on the oxidation of dahlia violet by potassium periodate with nitrilotriacetic acid as an activitor in the presence of nonionic microemulsion. Under the optimum conditions, the calibration graph is linear in the range of 0.0004-0.0056 μg ml⁻¹ of manganese (II) at 580 nm. The detection limit achieved is 3.75×10⁻⁵ μg ml⁻¹. Manganese (II) in foodstuff samples was determined with satisfactory results.     

Chlorodesmethyldiazepam Fluorimetric Determination in Pharmaceutical Formulations and in Aqueous Media

Abstract

A direct fluorimetric method for the determination of chlorodesmethyldiazepam was proposed. The fluorescence process was pH dependent. The dynamic range for the method was 1.6–12 µg ml^–1. A linear relationship between the fluorescence intensity and the concentration of chlorodesmethyldiazepam solution was obtained with r ² of 0.9958. The detection limit for the method was found to be 0.224 µg ml^–1. The method has successfully applied to the determination of chlorodesmethyldiazepam in pure, authentic, and aqueous samples.     

Determination of Biacetyl by Sensitized Photochemical Kinetic Fluorimetry

Abstract

A new in-situ photochemical kinetic fluorimetric method was proposed for the determination of biacetyl (BI). It is based on the sensitization of BI on the photochemical reaction of amaranth (AM). AM, a nonfluorescent compound was converted into an intensively fluorescent compound in a slightly alkaline medium by the sensitized photochemical reaction, and BI was indirectly determined by monitoring the change of the fluorescence intensity. The determination can be carried out by fixed-time method or tangent method. The kinetic behavior of the reaction and the effects of some experimental conditions were investigated and discussed. The calibration graph was rectilinear from 1.0 μg ml^?1 to 10.0 μg ml^?1 of BI (r = 0.999), the limit of detection was 1.0 ng ml^?1, and the coefficient of variation was 0.44% for 0.90 μg ml^?1 of BI (n = 6). The mechanism for the sensitization of BI was examined and the triplet-triplet energy transfer, in which BI acted as the energy donor and AM as the energy acceptor, was suggested to be the main cause. Its application to real samples has been tested.     

Determination of aristolochic acids in medicinal plant and herbal product by liquid chromatography-electrospray-ion trap mass spectrometry

This paper describes a liquid chromatography-electrospray-ion trap mass spectrometry (LC-ES-ITMS) method for the determination of aristolochic acid I and II (AA-I and AA-II) in medicinal plants and Chinese herbal remedies. A reversed phase C₁₈ column with gradient elution was utilized. The effects of mobile phase additives, acetic acid and ammonium acetate, on LC separation and ES ionization were investigated. For both AA-I and AA-II, the [M+NH₄]⁺ ion was found to be the precursor ion for target MS/MS analysis. The MS/MS product ion, [M+H−44]⁺, was used for the quantitative measurement of AA-I and AA-II. The linearity was good from 0.03 to 5 μg ml⁻¹ and good correlation (r²=0.999) over the range examined was determined for both AA. The detection limit based on a signal-to-noise ratio of three was 0.012 and 0.015 μg ml⁻¹ for AA-I and AA-II, respectively. Various Chinese herbal remedies obtained from renal failure patients and medicinal plants were examined by this newly developed method.     

Flow-injection fluorimetric determination of menadione using on-line photo-reduction in micellar media

A very sensitive fluorimetric method for the determination of menadione using a flow injection system is proposed. The method is based on the on-line reduction of menadione in dodecylsulphate micelles upon irradiation with UV light. The strong fluorescence of the reduced menadione in micellar medium is measured at 410 nm with excitation at 340 nm. The method shows a linear range between 2.42 and 245 ng ml⁻¹ and a limit of detection of 0.18 ng ml⁻¹. The sample throughput was 90 injections per hour. The applicability of the assay was demonstrated by analysing this vitamin in commercial pharmaceutical preparations.