Synthesis and X-ray crystal structure analysis of the first nickel bisoxazoline pincer complex

The reaction in toluene between 2-iodo-1,3-bis(4′,4′-dimethyl-2′-oxazolinyl)benzene and Ni(COD)₂ gave [2,6-bis(4′,4′-dimethyl-2′-oxazolinyl)phenyl-N,C¹,N′]iodonickle(II) isolated in 69% yield. The structure of this novel nickel bisoxazoline pincer complex was confirmed by a X-ray crystal structure analysis.     

Preparations of bis[2-(2-arylethynyl)-3-thienyl]arenes and bis[2-{2-(trimethylsilyl)ethynyl}-3-thienyl]arenes

4,4′-Bis[2-(2-phenylethynyl)-3-thienyl]biphenyl, 4,4′-bis[2-{2-(trimethylsilyl)ethynyl}-3-thienyl]biphenyl and their congeners were prepared and their properties were studied. Extension of π-system through the central benzene ring was suggested by UV-vis spectra. Connection of two 1,4-bis[2-{2-(trimethylsilyl)ethynyl}-3-thienyl]benzene units was exemplified.     

A new type of chiral porphyrin: Organopalladium porphyrins with chiral chelating diphosphine ligands

Peripherally palladated Ni(II) porphyrins have been prepared using enantiopure chiral chelating diphosphines as supporting ligands on the attached Pd(II) fragment. Both enantiomers of the following complexes have been obtained in good yields, using oxidative addition of the bromoporphyrin starting material 5-bromo-10,20-diphenylporphyrinatonickel(II) (NiDPPBr (1)) to the [Pd⁰L] complex generated in situ from Pd₂dba₃ and the chiral ligand L: [PdBr(NiDPP)(CHIRAPHOS)] (2a,b) [CHIRAPHOS = 2,3-bis(diphenylphosphino)butane], [PdBr(NiDPP)(Tol-BINAP)] (3a,b) [Tol-BINAP) = 2,2′-bis(di-p-tolylphosphino)-1,1′-binaphthyl] and [PdBr(NiDPP)(diphos)] [diphos = 1,2-bis(methylphenylphosphino)benzene] (4a,b). The induced asymmetry in the porphyrin was readily detected by ¹H NMR and CD spectroscopy. The porphyrin chiroptical properties are strongly dependent upon the structure of the chiral ligand, such that a monosignate CD signal, and symmetric and asymmetric exciton couplets were observed for 4a, 2b, and 3a,b, respectively.     

Reactions of 1,4-bis(tetrazole)benzenes: formation of long chain alkyl halides

The reactions of 1,4-bis[2-(tributylstannyl)tetrazol-5-yl]benzene with α,ω-dibromoalkanes were carried out in order to synthesise pendant alkyl halide derivatives of the parent bis-tetrazole. This led to the formation of several alkyl halide derivatives, substituted variously at N1 or N2 on the tetrazole ring. The crystal structures of 1,4-bis[(2-(4-bromobutyl)tetrazol-5-yl)]benzene (2-N,2-N′), 1,4-bis[(2-(4-bromobutyl)tetrazol-5-yl)]benzene (1-N,2-N′) and 1,4-bis[(2-(8-bromooctyl)tetrazol-5-yl)]benzene (2-N,2-N′) are reported. Further discussion involves the structure of 1,4-bis[2-(6-bromohexyl)-2H-tetrazol-5-yl]benzene (2-N,2-N′) previously reported.     

Reactions of bis(tetrazole)phenylenes. Surprising formation of vinyl compounds from alkyl halides

The reactions of 1,2-bis(tetrazol-5-yl)benzene (1), 1,3-bis(tetrazol-5-yl)benzene (2), 1,4-bis(tetrazol-5-yl)benzene (3), 1,2-(Bu₃SnN₄C)₂C₆H₄ (4), 1,3-(Bu₃SnN₄C)₂C₆H₄ (5) and 1,4-(Bu₃SnN₄C)₂C₆H₄ (6) with 1,2-dibromoethane were carried out by two different methods in order to synthesise pendant alkyl halide derivatives of the parent bis-tetrazoles. This lead to the formation of several alkyl halide derivatives, substituted at either N1 or N2 on the tetrazole ring, as well as the surprising formation of several vinyl derivatives. The crystal structures of both 1,2-[(2-vinyl)tetrazol-5-yl)]benzene (1-N,2-N′) (1b) and 1,3-bis[(2-bromoethyl)tetrazol-5-yl]benzene (2-N,2-N′) (5d) are discussed.     

Raman and infrared spectral study of meso-sulfonatophenyl substituted porphyrins (TPPSn,n = 1, 2A, 2O, 3, 4)

Raman and IR spectra of the free base p-sulfonatophenyl and phenyl meso-substituted porphyrins [5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS4); 5,10,15-tris(4-sulfonatophenyl)-20-phenyl-porphyrin (TPPS3); 5,10-bis(4-sulfonatophenyl)-15,20-diphenylporphyrin (TPPS2A); 5,15-bis(4-sulfonatophenyl)-10,20-diphenylporphyrin (TPPS2O); and 5-(4-sulfonatophenyl)-10, 15,20-trisphenylporphyrin (TPPS1)] and their N-diprotonated derivatives (porphyrin diacids) were studied. The Raman spectra of the deuterated analogues of these porphyrins, in which the central hydrogen atoms were substituted with deuterium, were also measured. The observed vibrational bands were assigned on the basis of the deuteration shifts and compared with the structural analogues of these compounds. In IR spectra of the free-base porphyrins, the p-sulfonation of phenyl groups results in evident alteration for the phenyl modes and the porphyrin skeleton modes that are strongly coupled with phenyl vibrations. While the p-sulfonation of phenyl groups causes only slight changes for the high-frequency Raman bands (> 850 cm(-1)), dramatic shifts and band splitting were observed in the low-frequency region (< 500 cm(-1)) of Raman spectra. The observed differences of low-frequency Raman spectra were attributed to the alteration of the structure of the porphyrin ring, especially the CalphaCmCalpha bond-angles, by different meso-sulfonatophenyl substitutions. In addition, different packing style of TPPSn molecules in the aggregates is also responsible for the alteration of the vibrational spectra of the aggregated TPPSn.     

High functionalization of 5-nitro-1H-imidazole derivatives: the TDAE approach

We report herein the synthesis of substituted 2-[4-(1,2-dimethyl-5-nitro-1H-imidazol-4-yl)phenyl]-1-arylethanols, ethyl 3-[4-(1,2-dimethyl-5-nitro-1H-imidazol-4-yl)-phenyl]-2-hydroxypropanoate and 2-[4-(1,2-dimethyl-5-nitro-1H-imidazol-4-yl)benzyl]-2-hydroxy-acenaphthylen-1(2H)-one from the reactions of 4-[4-(chloromethyl)phenyl]-1,2-dimethyl-5-nitro-1H-imidazole with various aromatic carbonyl and a-carbonyl ester derivatives using tetrakis(dimethylamino)ethylene (TDAE) methodology.     

Synthesis of n-chloroquinolines and n-ethynylquinolines (n=2, 4, 8): homo and heterocoupling reactions

The n-(ethynyl)quinolines were satisfactorily prepared by heterocoupling reaction between the appropriate n-chloroquinoline and 2-methyl-3-butyn-2-ol, catalyzed by palladium, followed by treatment with a catalytic amount of powdered sodium hydroxide in toluene. The n-(ethynyl)quinolines were transformed in the corresponding conjugate 1,4-bis[n′-(quinolyl)]buta-1,3-diynes by oxidative dimerization, catalyzed by cuprous chloride, with excellent yields. Moreover, the heterocoupling between n′-haloquinoline and n′-(ethynyl)quinoline (n′, 2′ or 3′), catalyzed by palladium, gives 2′,2′-bis(quinoline) or 1,2-di(3′-quinolyl)ethyne, respectively. The same coupling reaction with zerovalent nickel complexes, gives a mixture of 1,2,4- and 1,3,5-tri(n′-quinolyl)benzene.     

Synthesis of new imines and amines containing organosilicon groups

The Peterson olefination reaction of terephthalaldehyde with tris(trimethylsilyl)methyl lithium, (Me₃Si)₃CLi, in THF at 0 °C gives 4-[2,2-bis(trimethylsilyl)ethenyl]benzaldehyde (1) and 4,4-bis[2,2-bis(trimethylsilyl)ethenyl]benzene (2). The new aldehyde (1) reacts with variety of amines in ethanol to afford the corresponding imines (3) containing vinylbis(trimethylsilyl) group. The newly synthesized imines (3) can be completely converted into amines containing vinylbis(trimethylsilyl) group with an excess amount of NaBH₄. In the case of N-[4-(2,2-bis(trimethylsilyl)ethenyl)benzyl]-2,6-dimethylaniline LiAlH₄ was used as a reducing agent in THF.     

Preparation and properties of nitrogen-substituted thiosulfinyl compounds and related new heterocycles

The reaction of dilithiated N,N′-dimethyl-1,2-diphenylethylenediamine with disulfur dichloride (S₂Cl₂) gave a thiosulfinyl compound (R₂N)₂SS, 2,5-dimethyl-3,4-diphenyl-1,2,5-thiadiazolidine 1-sulfide, whereas the treatment of dilithiated N,N′-bis(p-toluenesulfonyl)-1,2-diphenylethylenediamine with S₂Cl₂ furnished a new heterocycle, 3,6-bis(p-toluenesulfonyl)-4,5-diphenyl-4H,5H-1,2,3,6-dithiadiazine.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.     

The reductive dimerization of some 1,3-dienes and of 1,3,5-cycloheptatriene in the presence of trimethylchlorosilane: a DFT investigation

Treatment of 1,3-dienes and 1,3,5-cycloheptatriene by chlorotrimethylsilane in the presence of wire of lithium led mainly to reductive dimerization with formation of bis(allylsilane) derivatives. Bis-silyl compounds obtained: from 1,3-butadiene, 1,8-bis(trimethylsilyl)-2,6-octadiene (70%); from isoprene, (Z,Z)-2,7-dimethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (44%) and 2,6-dimethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (19%); from butadiene-isoprene mixture (1:1), 3-methyl-1,8-bis(trimethylsilyl)-2,6-octadiene (55%); from 2,3-dimethylbutadiene, (E,E)-2,3,6,7-tetramethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (36%), from 1,3-cyclohexadiene, 4,4′-bis(trimethylsilyl)-bicyclohexyl-2,2′-diene (48%); from 1,3,5-cycloheptatriene, 1,1′-bi[(S^∗,S^∗)-6-(trimethylsilyl)cyclohepta-2,4-dien-1-yl] (53%). The structure of the various intermediates (radical anion, dianion, silylated radical, silylated anion) has been established by calculations at the B3LYP/6-311++G(d,p) level of theory with zero-point energy correction. These results are in accordance with a pathway including the formation of a radical anion, its silylation furnishing to a γ-silylated allylic radical followed by a dimerization reaction in the head to head manner.     

[1,5] Sigmatropic shifts in a 1,4-diphospholylbenzene

The central phenylene ring of 1,4-bis(3,4-dimethylphosphol-1-yl)benzene undergoes [1,5] shifts around both phospholyl rings above 150°C to give 1,4-bis(3,4-dimethyl-5H-phosphol-2-yl)benzene, which can be trapped by tolane, [CpFe(CO)₂]₂, or Mn₂ (CO)₁₀ to yield the corresponding bis-1-phosphanor-bornadiene, bis-phosphaferrocene, or bis-phosphacymantrene respectively.     

rac-Lactide polymerization using aluminum complexes bearing tetradentate phenoxy-amine ligands

A family of aluminum-methyl complexes supported by tetradentate phenoxy-amine ligands has been prepared and employed in the ring-opening polymerization of rac-lactide; the ligands include N,N-bis(3,5-dimethyl-2-hydroxybenyl)-N′,N′-dimethyl-1,2-diaminoethane (L¹), N,N-bis(3,5-diisopropyl-2-hydroxybenyl)-N′,N′-dimethyl-1,2-diaminoethane (L²) and N,N-bis(3,5-dichloro-2-hydroxybenyl)-N′,N′-dimethyl-1,2-diaminoethane (L³). Polymerizations of rac-lactide were carried out by treatment of the aluminum-methyl complexes with PhCH₂OH and rac-lactide at 70 °C, affording well-controlled formation of polylactide (PLA) and a moderate isotactic bias for initiators bearing L¹ and L²; the chloro-substituted ligand L³ afforded largely atactic PLA.     

A novel titanium tetrachloride-induced rearrangement of an enantiopure 4-naphthyldioxolane. The possible role of titanium in the umpolung of tosyloxy and chlorine

The rearrangement of (2′S,4′R,5′S)-2-(2′,5′-dimethyl-1′,3′-dioxolan-4′-yl)-4,5,7-trimethoxynaphthalen-1-yl 4″-methylbenzenesulfonate with titanium(IV) chloride affords (1R,3S,4R)-10-chloro-6,7,9-trimethoxy-1,3-dimethyl-3,4-dihydro-4-hydroxynaphtho[1,2-c]pyran in good yield. This transformation is characterized by two unusual aromatic substitution reactions in that, in one, tosyloxy is lost and, in the other, aromatic chlorination occurs with titanium(IV) chloride as the source of chlorine.     

Synthesis, crystal structure and antibacterial activity of a group of mononuclear manganese(II) Schiff base complexes

Five mononuclear complexes of manganese(II) of a group of the general formula, [MnL(NCS)₂] where the Schiff base L = N,N′-bis[(pyridin-2-yl)ethylidene]ethane-1,2-diamine (L¹), (1); N,N′-bis[(pyridin-2-yl)benzylidene]ethane-1,2-diamine (L²), (2); N,N′-bis[(pyridin-2-yl)methylidene]propane-1,2-diamine (L³), (3); N,N′-bis[(pyridin-2-yl)ethylidene]propane-1,2-diamine (L⁴), (4) and N,N′-bis[(pyridin-2-yl)benzylidene]propane-1,2-diamine (L⁵), (5) have been prepared. The syntheses have been achieved by reacting manganese chloride with the corresponding tetradentate Schiff bases in presence of thiocyanate in the molar ratio of 1:1:2. The complexes have been characterized by IR spectroscopy, elemental analysis and other physicochemical studies, including crystal structure determination of 1, 2 and 4. Structural studies reveal that the complexes 1, 2 and 4 adopt highly distorted octahedral geometry. The antibacterial activity of all the complexes and their respective Schiff bases has been tested against Gram(+) and Gram(−) bacteria.     

2,2-diphenyl-2λ5-phospha-phenalenyl-und 2,2-dimethyl-2λ5-phospha-indenyl-lithium

From the reaction of 1,8-bis(bromomethyl)naphthalene with diphenyl(trimethylsilyl)phosphine a cyclic phosphonium salt IX is formed which can be rearranged with (CH₃)₃PCH₂ to yield the cyclic ylide X. Its metallation with t-butyllithium gives 2,2-diphenyl-2λ⁵-phospha-phenalenyl-lithium XI. The anion of XI cannot be seen as a delocalized phospha-phenalenyl π-system but rather as a phosphonium-bis-ylide similar to the diphenylphosphonium-bis-benzylide.From 1,2-bis(chloromethyl)benzene and (C₆H₅)₂PSi(CH₃)₃ or from 1,2-bis(chloromagnesiummethyl)benzene and CH₃PCl₂, followed by quaternization using CH₃Br, cyclic phosphonium salts (XII and XV, respectively) can also be obtained, which may again be rearranged to form the ylides XIII or XVI. XVI gives with (CH₃)₃CLi 2,2-dimethyl-2λ⁵-phospha-indenyl-lithium XVII, containing a dimethyl-phosphonium-bis-ylide anion (“isophosphindolyl-lithium”).     

Synthesis of azepino[1,2-<Emphasis Type="Italic">a</Emphasis>]benzimidazoles and imidazo[1,2-<Emphasis Type="Italic">a</Emphasis>]azepines

Fusion of 4-bromo-1,3-diphenyl-2-buten-1-ones (γ-bromodypnones) with 1,2-dimethyl-1H-benzimidazole and further treatment of the reaction product with a base (morpholine) gives 7,9-diaryl-5-methyl5,10-dihydroazepino[1,2-a]benzimidazol-11-ium bromides. The reaction of γ-bromodypnone with 1-alkyl-2-methyl-1H-imidazoles in benzene at 25 °C gives quaternary azolium salts. Upon heating their solutions in alcohol in the presence of K₂CO₃ the latter cyclize to 1-R-6,8-diaryl-1,5-dihydroimidazo[1,2-a]azepin-4-ium bromides or 1-R-6,8-diaryl-1H-imidazo[1,2-a]azepines depending on the nature of the substituent in the benzene rings and the substituent at the N(1) atom of the imidazole.     

Synthesis of dithieno[2,3-b:4',3'-d]siloles and their selective bromination

The efficient synthesis of novel unsymmetrical dithienosiloles, 7,7-dimethyl-4,6-di(trimethylsilyl)-dithieno[2,3-b:4',3'-d]silole (1) and 7,7-dimethyl-2,4,6-tri(trimethylsilyl)-dithieno[2,3-b:4',3'-d]silole (2) has been developed by intramolecular silole formation with 4,4'-dibromo-2,2',5,5'-tetrakis(trimethylsilyl)-[3,3']bithienyl (3) as the starting material in the presence of t-BuLi. Upon treatment with N-bromosuccinimide (NBS) under controlled conditions, dithieno[2,3-b:4',3'-d]silole was selectively brominated to produce mono-, di-, and tribrominated dithieno[2,3-b:4',3'-d]siloles in good yields. The crystal structures of the title compounds are described.     

2,2′-Bifurylidene-5,5′-diones,Coumarins, 3a, 7a-dihydro-1H-inden-1-ones,and 5H-furo[3,2-b]pyran-5-ones from propyne and carbon monoxide

The [Co₂ (CO)₈]-catalyzed reaction between propyne and CO in acetone at 110° and 170 bar was re-investigated. There are five major products: (E)-3,4′-dimethyl-2,2′-bifurylidene-5,5′-dione ( 4 ), 3,5,8-trimethylcoumarin ( 8 ), 3a, 7a-dihydro-2,4,7,7a-tetramethyl-1H-inden-1-one ( 9 ), 2,6-dimethyl-5H-furo [3,2, -b]- pyran-5-one ( 11 ), and 2,7-dimethyl-5H-furo 3,2-b-pyran-5-one ( 12 ); of these, only one, 4 . had previously been recognized. In parallel experiments were obtained 2,6-dipentyl-5 H-furo[3,2-b]pyran-5-one ( 13 ), 2,7-dipentyl–5H-furo[3,2-b]pyran-5-one ( 14 ), 3a, 7a-dihydro-2,4,7,7a-tetrapentyl-1H-inden-1-one ( 15 ). And 3a, 7a-dihydro-2,4,6,7a-tetrapentyl-1H-inden-1-one ( 16 ) from hept-1-yne, and two further types of products from two atypical 1-alkynes: 3,6,9-tri(tert-butyl)-1-oxaspiro[4.4]nona-3,6,8-trien-2-one ( 20 ) from (tert-butyl)acetylene and the exo-dimer 21 of 2,5-bis(trimethylsilyl)cyclopenta-2,4-dien-1-one ( 22 ) from (trimethylsilyl)acetylene. Compounds 11,12 , and 20 were identified by X-ray analysis.