N-Polyfluoroethyl and N-2-chlorodifluorovinyl derivatives of azoles

Reactions of tetrafluoroethylene, chlorotrifluoroethylene and 1,2-dichlorodifluoroethylene with N-potassium salts of imidazole, 2-methylbenzimidazole, 3,5-dimethylpyrazole, 1,2,4-triazole, and benzotriazole lead to the formation of the corresponding N-(1,1,2,2-tetrafluoroethyl), N-(2-chloro-1,1,2-trifluoroethyl), and N-(2-chloro-1,2-difluorovinyl) azoles. Treatment of N-(2-chloro-1,2-difluorovinyl) and N-(2-chloro-1,1,2-trifluoroethyl) derivatives of azoles with tetramethylammonium fluoride is a useful synthetic method for the preparation of heterocycles with 1,2,2,2-tetrafluoroethyl group attached to nitrogen.     

Syntheses and structures of iron carbonyl complexes derived from N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine and N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine

The reaction of N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine (1) with Fe₂(CO)₉ in refluxing acetonitrile yielded di-(μ₃-thia)nonacarbonyltriiron (2), μ-[N-(5-methyl-2-thienylmethyl)-η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido]hexacarbonyldiiron (3), and N-(5-methyl-2-thienylmethylidene)amine (4). If the reaction was carried out at 45 °C, di-μ-[N-(5-methyl-2-thienylmethylidene)-η¹(N);η¹(S)-2-thiolethylamino]-μ-carbonyl-tetracarbonyldiiron (5) and trace amount of 4 were obtained. Stirring 5 in refluxing acetonitrile led to the thermal decomposition of 5, and ligand 1 was recovered quantitatively. However, in the presence of excess amount of Fe₂(CO)₉ in refluxing acetonitrile, complex 5 was converted into 2-4. On the other hand, the reaction of N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine (6) with Fe₂(CO)₉ in refluxing acetonitrile produced 2, μ-[N-(6-methyl-2-pyridylmethyl)-η¹ (N_py);η¹:η¹(N); η¹:η¹(S)-2-thiolatoethylamido]pentacarbonyldiiron (7), and μ-[N-(6-methyl-2-pyridylmethylidene)-η²(C,N);η¹:η¹(S)-2- thiolethylamino]hexacarbonyldiiron (8). Reactions of both complex 7 and 8 with NOBF₄ gave μ-[(6-methyl-2-pyridylmethyl)-η¹(N_py);η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido](acetonitrile)tricarbonylnitrosyldiiron (9). These reaction products were well characterized spectrally. The molecular structures of complexes 3, 7-9 have been determined by means of X-ray diffraction. Intramolecular 1,5-hydrogen shift from the thiol to the methine carbon was observed in complexes 3, 7, and 9.     

N-(Trifluoromethylsulfonyl)trifluoromethanesulfinimidic acid and its salts

Lithium, sodium and potassium N-(trifluoromethylsulfonyl)trifluoromethanesulfinimidates were obtained by the reaction of the corresponding sulfinimidoyl chloride with alkali metal trimethylsilanolates. The potassium and sodium salts were converted to the free acid, having predominantly the amidic tautomeric structure, CF₃S(O)NHSO₂CF₃, by treatment with concentrated H₂SO₄ or with H⁺-cationite.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

N-(Diethoxyphosphoryl)-O-benzylhydroxylamine—a convenient substrate for the synthesis of N-substituted O-benzylhydroxylamines

Easily available N-(diethoxyphosphoryl)-O-benzylhydroxylamine was shown to be convenient, orthogonally protected substrate for regioselective N-alkylation by means of diverse halides under basic conditions (sodium hydride/tetrabutylammonium bromide). An efficient procedure for dephosphorylation of N-substituted N-(diethoxyphosphoryl)-O-benzylhydroxylamine to provide N-substituted O-benzylhydroxylamines was also established.     

Elimination of benzotriazolyl group in N-(α-benzotriazol-1-ylalkyl)amides and N-(α-benzotriazol-1-ylalkyl)sulfonamides: their self-coupling and cross-coupling reactions with carbonyl compounds

The elimination of benzotriazolyl group from N-(α-benzotriazol-1-ylalkyl)amides and N-(α-benzotriazol-1-ylalkyl)sulfonamides are readily realized with samarium diiodide as a reducing agent. The resulting intermediates undergo a dimerization or cross-coupling reaction with carbonyl compounds, thus affording the corresponding dimers or α-hydroxyalkylated sulfonamides in moderate yields.     

A practical synthesis of 2-(N-substituted)-aminobenzimidazoles utilizing CuCl-promoted intramolecular cyclization of N-(2-aminoaryl)thioureas

A practical protocol for synthesis of 2-(N-substituted)-aminobenzimidazoles was developed. N-(2-Aminoaryl)thioureas undergo a CuCl-promoted intramolecular cyclization to give the corresponding 2-(N-substituted amino)benzimidazoles in good to excellent isolated yields.     

Synthesis and biological activities of N-(1,2,4-triazole-4-yl)-N′-(fluorine-containing-phenyl)carbamimidothioates

A series of N-(1,2,4-triazole-4-yl)-N′-(fluorine-containing-phenyl)carbamimidothioates 5a-i were synthesized by reacting 4-amine-1,2,4-trizaole with corresponding aryl isothiocyanates in ethanol at room temperature and, in a subsequent step, with methyl iodide. The antifungal activities of the title compounds against the fungi Rhizoctonia solan and Pyricularia orizae were screened.     

Transition-metal-free approach to synthesis of indolines from N-(ortho-chloromethyl)aryl amides and iodonium ylides

A transition-metal-free method for the synthesis of indolines has been developed. In the presence of K₂CO₃, the cyclization reaction of N-(ortho-chloromethyl)aryl amides and iodonium ylides proceeded smoothly at room temperature in moderate to good yields.     

Aza-Morita-Baylis-Hillman reactions of N-(benzylidene)polyfluoroanilines with methyl acrylate and acrylonitrile

Aza-Morita-Baylis-Hillman reactions of N-(benzylidene)polyfluoroanilines 1 with methyl acrylate or acrylonitrile were studied. It was found that Lewis base, solvent and reaction temperature can significantly affect the reaction. Using 3-hydroxyquinuclidine (3-HQD) as a Lewis base in the reactions of 1 with methyl acrylate in DMF, the normal aza-Morita-Baylis-Hillman adducts 3 were formed in moderate to excellent yields. For the reactions of 1 with acrylonitrile, 1,4-diazabicyclo[2.2.2]octane (DABCO) is the best Lewis base giving the corresponding aza-Morita-Baylis-Hillman adducts 4 as the sole product in good to moderate yield. However, upon treatment of 1 with acrolein 2c, the corresponding reaction did not occur even in the presence of a variety of catalysts.     

Simple and efficient cleavage of the N-(1-phenylethyl) unit of carboxamides with methanesulfonic acid

Cleavage of the N-(1-phenylethyl) unit of carboxamides using less than 1 equiv of MsOH in refluxing toluene was found to be simple and very efficient leading to the desired amides in good to excellent yields, and also proved to be more effective compared with reductive methods using hydrogen sources, or acid hydrolysis reagents such as TFA and TsOH. The method selectively cleaved only the N-(1-phenylethyl) group of N-benzyl-N-(1-phenylethyl)amides.     

Ascorbate amperometric determination using conducting copolymers from aniline and N-(3-propane sulfonic acid)aniline

The sequential electrochemical polymerization of aniline and N-(3-propane sulfonic acid)aniline (PSA) is proposed to construct a sensor able to detect ascorbate at physiological conditions. Compared to poly(aniline) modified electrode, a device with improved conducting and electrochemical properties at neutral pH is obtained. The electrochemical copolymerization of the same starting materials is also carried out. For a PSA:aniline ratio of 10:90, a polymer with a similar electrochemical behavior to the one grown in the sequential mode is observed.The detection of ascorbate was tested for both configurations at pH 7.2, the modified electrode is able to determine ascorbate at 0 mV versus Ag/AgCl; an optimized sensor constructed by sequential polymerization can easily detect ascorbate concentrations with a detection limit of 2.2 μM. Uric acid and dopamine does not interfere in the ascorbate determination.     

Study on thermal cure and heat-resistant properties of N-(3-acetylenephenyl)maleimide monomer

N-(3-acetylenephenyl)maleimide (3-APMI), was synthesized by reacting 3-aminophenylacetylene (3-APA) with maleic anhydride by the usual two-step procedure that included ring-opening addition to give maleamic acid, followed by cyclodehydration to maleimide. Structure of the monomer was confirmed by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR), elemental analysis (EA) and mass spectrum (MS). Thermal cure of the monomer was investigated by differential scanning calorimetry (DSC) and FTIR, then processing parameters and cure kinetics parameters were determined. The results showed that the monomer possesses excellent reactivity, whose cure peak temperature was 197.9 °C and cure reaction was almost complete after 4 h cure at 200 °C. Thermal properties of the cured monomer were determined by dynamic mechanical analysis (DMA) and the results show that glass transition temperature (represented by onset temperature of storage modulus) is high up to 460 °C. The results of thermogravimetry analysis (TGA) reveal that the cured monomer possessed excellent thermal stability, whose 10% weight loss temperature (T_10%) is 515.6 °C and char yield at 800 °C is 59.1%. All these characteristics make the 3-APMI monomer be an ideal candidate for matrix of thermo-resistant composites.     

Electroreductive intramolecular coupling of N-(oxoalkyl)phthalimides: complementary method to samarium(II) iodide reduction

The electroreductive intramolecular coupling of phthalimides with ketones in the presence of chlorotrimethylsilane gave five- and six-membered trans-cyclized products stereospecifically (>99%). Similar electroreductive intramolecular coupling of phthalimides with aldehydes afforded five-, six-, and seven-membered trans-cyclized products stereoselectively (75-93%). On the other hand, the reductive coupling of N-(oxoalkyl)phthalimides with samarium(II) iodide gave cis-cyclized products stereoselectively (88->99%).     

N-(Pyridin-2-yl)picolinamide tetranickel clusters: Synthesis,structure and ethylene oligomerization

A series of N-(pyridin-2-yl)picolinamide derivatives was synthesized and characterized. Tetranickel complexes were obtained by stoichiometric reaction of NiBr₂ and corresponding ligands, and characterized by elemental and spectroscopic analysis. Moreover, the coordination pattern of complex 3a was confirmed by single-crystal X-ray diffraction. In the structure, two ligands linked two nickel atoms to form a unit, and two units were bridged via μ₃-OMe and μ₂-Br to form a tetranickel cluster. These Ni(II) complexes were investigated in ethylene oligomerization and found to exhibit remarkable catalytic activities upon activation with MAO. Reaction conditions as well as ligand environment significantly affected the catalytic performance of the nickel complexes; the highest activity could be achieved to be 2.7 × 10⁶ g mol⁻¹ Ni h⁻¹.     

An amide orthoesterification route to N-(1′-alkylthioglucopyranosyl)indoles

The addition of 3-methylindolylmagnesium bromide to tetra-O-benzyl-α-d-gluconothionolactone yields the expected indole N-gluconothioamide as its hemiorthothioamide tautomer. The thiol function is alkylated to yield the corresponding orthothioamide, a 1′-alkylthio-substituted N-glycoside. Alternatively, the 1′-alkylthio-N-glycoside can be accessed from the corresponding indole N-gluconamide via a boron trifluoride-etherate mediated orthoesterification with ethanethiol. Radical reduction of the orthothioamide yields the N-glycosides in 2:1 stereoselectivity in favor of the β-N-glycoside, while reduction via the oxonium ion leads to an improved 6:1 selectivity.     

Some aspects of nitroxide-mediated living radical polymerization of N-(p-vinylbenzyl)phthalimide

The free radical polymerization of N-(p-vinylbenzyl)phthalimide (VBP) “initiated” with the adduct of 2-benzoyloxy-1-phenylethyl and TEMPO (BS-TEMPO) or TEMPO-terminated polystyrene (PS-TEMPO) in N,N-dimethylformamide (DMF) at 125 °C was found to proceed in a living fashion, providing low-polydispersity PVBP and block copolymers of the type PS-b-PVBA, where TEMPO is 2,2,6,6-tetramethylpiperidinyl-1-oxy. Unlike TEMPO-mediated styrene polymerization, the polymerization rate slightly but distinctly depended on the adduct concentration, which was interpretable as a pre-stationary behavior. The hydrolysis of those polymers gave poly(p-aminomethylstyrene) (PAMS) and PS-b-PAMS, and further treatment of the block copolymer with hydrogen chloride provided an amphiphilic block copolymer. The polymeric amphiphile was used as an emulsifier in emulsion polymerization to produce a positively charged polymeric microsphere.     

Experimental and theoretical study of N-(2-hydroxyethyl)morpholine betaine

N-(2-hydroxyethyl)morpholine betaine (HEMB) has been characterized by a single crystal X-ray analysis, FTIR spectroscopy and DFT calculations. The crystals are monoclinic, space group P2₁/c with a=10.273(2), b=9.360(2), c=9.447(2) Å and β=104.72(3)Å. Two molecules of HEMB form a centrosymmetric dimer (X2) connected by a pair of hydrogen bonds between the CH₂CH₂OH and COO⁻ groups, with the O?O distance of 2.672(2) Å. The morpholine ring adopts a chair conformation with the CH₂CH₂OH group in the axial and the CH₂COO⁻ group in the equatorial position. The structures of the dimer, B2, and two monomers, B1a and B1b, have been optimized by the B3LYP approach using the 6-31G(d,p) basis set. The computed structure of B2, agrees well with the experimental X2. From two stable monomeric conformers the more favored is B1a, with the intramolecular hydrogen bond with the O-H?O distance of 2.566 Å. The effects of hydrogen bonding and electrostatic interactions on the conformation of the molecules investigated have been discussed. The FTIR spectrum shows a broad absorption in the 3300-2600 cm⁻¹ region, typical of moderate O-H?O hydrogen bonds.     

General-buffer catalysis of the reaction of N-(hydroxymethyl)benzamide: a new pathway for the aqueous reaction of carbinolamides

The second-order rate constants for the general-buffer catalyzed breakdown of N-(hydroxymethyl)benzamide (1) in water at 25 °C, I = 1.0 (KCl) by pivalic, acetic, chloroacetic, and dichloroacetic acid were determined by initial rates. The observed rate increased with increasing amounts of the acidic form of the buffer and a Brønsted correlation of α = 0.35 was determined. The results presented here, represent the first evidence for a general-buffer catalytic mechanism for the aqueous reaction of 1 and for carbinolamides in general.