Palladium-catalyzed cross-coupling reactions of amines with alkenyl bromides: a new method for the synthesis of enamines and imines

The palladium-catalyzed cross-coupling reaction of alkenyl bromides with secondary and primary amines gives rise to enamines and imines, respectively. This new transformation expands the applicability of palladium-catalyzed C-N bond forming reactions (the Buchwald-Hartwig amination), which have mostly been applied to aryl halides. After screening of different ligands, bases, and solvents, the catalytic combination [Pd(2)(dba)(3)]/BINAP in the presence of NaOtBu in toluene gave the best results in the cross-coupling of secondary amines with 1-bromostyrene (dba=dibenzylideneacetone, BINAP=2,2'-bis(diphenylphosphino)-1,1'-binaphthyl). The corresponding enamines are obtained cleanly and in nearly quantitative yields. However, steric hindrance seems to be a limitation of the reaction, as amines carrying large substituents are not well converted. The same methodology can be applied to the coupling of secondary amines with 2-bromostyrene. Moreover, the reaction with substituted 2-bromopropenes allows regioselective synthesis of isomerizable terminal enamines without isomerization of the double bond. The best catalytic conditions for the cross-coupling of 1-bromostyrene with primary amines include again the use of the Pd(0)/BINAP/NaOtBu system. The reaction gives rise to the expected imines in very short times and with low catalyst loadings. A set of structurally diverse imines can be prepared by this methodology through variations in the structure of both coupling partners. However, 2-bromostyrene failed to give good results in this coupling reaction, probably due to product inhibition of the catalytic cycle. Competition experiments of vinyl versus aryl amination reveal that the reaction occurs preferentially on vinyl bromides.     

Organocatalyzed highly enantioselective direct aldol reactions of aldehydes with hydroxyacetone and fluoroacetone in aqueous media: the use of water to control regioselectivity

An organocatalyst prepared from (2R,3R)-diethyl 2-amino-3-hydroxysuccinate and L-proline exhibited high regio- and enantioselectivities for the direct aldol reactions of hydroxyacetone and fluoroacetone with aldehydes in aqueous media. It was found that water could be used to control the regioselectivity. The presence of 20-30 mol% of the catalyst afforded the direct aldol reactions of a wide range of aldehydes with hydroxyacetone to give the otherwise disfavored products with excellent enantioselectivities, ranging from 91 to 99% ee, and high regioselectivities. Aldolizations of fluoroacetone with aldehydes mediated by 30 mol% of the organocatalyst in aqueous media preferentially occurred at the methyl group, yielding products with high enantioselectivities (up to 91% ee); however, these additions took place dominantly at the fluoromethyl group in THF. Optically active 3,5-disubstituted tetrahydrofurans and (2S,4R)-dihydroxy-4-biphenylbutyric acid were prepared by starting from the aldol reaction of hydroxyacetone. Theoretical studies on the role of water in controlling the regioselectivity revealed that the hydrogen bonds formed between the amide oxygen of proline amide, the hydroxy of hydroxyacetone, and water are responsible for the regioselectivity by microsolvation with explicit one water molecule as a hydrogen-bond donor and/or an acceptor.     

Investigation of reactions between [60]fullerene and molecular fluorine in a CoF2 matrix

Fluorination of [60]fullerene dispersed in a CoF₂ matrix with molecular fluorine was studied. The reaction was carried out in a mass spectrometer. The partial pressures of volatile products were continuously monitored at the constant fluorine inlet. The differences in the activation barriers of subsequent fluorination from C₆₀ to C₆₀F₄₄ were estimated. The conditions, at which C₆₀F₁₈ and C₆₀F₃₆ were formed selectively, were found. Based on a comparison between the fluorination of pure C₆₀ and C₆₀ dispersed in CoF₂ matrix, the role of a matrix in the selectivity of this process was elucidated.     

A new method for the synthesis of N-protected β-amino-α-keto esters from fluoroalkanesulfonylazides and α-keto esters

In the presence of a secondary amine, treatment of α-keto esters with fluoroalkanesulfonyl azides at room temperature afforded N-sulfonyl protected β-amino-α-keto esters in good to excellent yields. This reaction provided a novel, direct and convenient access to N-sulfonyl protected β-amino-α-keto esters from α-keto esters and fluoroalkanesulfonyl azides under mild conditions. However, the reaction of fluoroalkanesulfonyl azides with β-ketoester enamines afforded two products: N-fluoroalkanesulfonyl amidines and diazoacetate. The reaction mechanism is discussed.     

Vinylsulfones versus alkylsulfones in the addition to chiral imines. Synthesis of N-(tert-butoxycarbonyl)-l-homophenylalanine

A study of the addition of vinylsulfones versus alkylsufones has been done, and applied to the synthesis of N-(tert-butoxycarbonyl)-l-homophenylalanine.     

Cyclizations in the reactions of isocyanates with compounds containing active methylene groups in the presence of triethylamine

Novel reactions of isocyanates with compounds containing active methylene groups in the presence of triethylamine are described. The reactions afford derivatives of pyrrolidine-2,3,5-trione and barbituric acid. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 844–849, May, 2006.     

A new finding in selective Baeyer-Villiger oxidation of α-fluorinated ketones; a new and practical route for the synthesis of α-fluorinated esters

α-Fluorinated esters were effectively prepared by the Baeyer-Villiger oxidation of α-fluorinated ketones with m-chloroperbenzoic acid (m-CPBA) under mild conditions. The yield of the esters was influenced by the choice of solvent, base, and substituent on the aryl group of the ketones. 4-Methoxyphenyl substituted fluoroketones were oxidized almost quantitatively with m-CPBA within 10 min to 12 h at room temperature using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as a cosolvent with CH₂Cl₂ (1:1, v/v) and aqueous buffer (KH₂PO₄-NaOH, pH 7.6) as an additive base. The oxidation reaction rates of α-fluorinated ketones were higher than those of the corresponding non-fluorinated ketones. The fluorine atom at α-position of fluoromethyl aryl ketones enhanced the reactivity in the Baeyer-Villiger oxidation.     

One-pot palladium-catalyzed highly chemo-, regio-, and stereoselective synthesis of trans-stilbene derivatives. A concise and convenient synthesis of resveratrol

A convenient, efficient and highly chemo-, regio-, and stereoselective one-flask synthetic method is reported for the construction of unsymmetrical (or symmetrical) trans-stilbene derivatives based on two sequential Heck-type reactions using tetraalkylammonium salt-based catalyst systems and vinyltrimethylsilane as double bond equivalents. Resveratrol has thus been concisely synthesized.     

Structural revision in the reactions of 3-cyanochromones with primary aromatic amines. Improved synthesis of 2-amino-3-(aryliminomethyl)chromones

3-Cyanochromones react with primary aromatic amines to give 2-amino-3-(aryliminomethyl)chromones as the sole products or as their mixtures with Z- and E-3-anilino-2-salicyloylacrylonitriles, depending on the reaction conditions. With aliphatic amines, 2-amino-3-(alkyliminomethyl)chromones are obtained in good yields. The reaction of 3-cyanochromone with o-phenylenediamine is reinvestigated and proof for the product structure and a possible reaction pathway are presented.     

Reactivity and regioselectivity in the synthesis of spiroindoles via indole o-quinodimethanes. An experimental and computational study

The 1,3-dipolar cycloaddition reactions of stable nitrile oxides with indole o-quinodimethanes have been examined. In all cases the ‘exo-anti’ addition products, dispiroisoxazolines, were isolated in moderate to good yields (25-47%). In addition, from the reaction of one of the indole quinodimethanes with mesitonitrile oxide the ‘exo-syn’ addition product was isolated in 7% yield along with the remarkable indole quinodimethane dimerization and cycloaddition product, which was isolated in 13% yield. An analogous dimerization and cycloaddition product was isolated in 18% yield from the reaction of the N-acetyl-indole quinodimethane with mesitonitrile oxide. In the case of the reaction of the N-benzoylindole quinodimethane with the 2,6-dichlorobenzonitrile oxide an oxime was also isolated in 13% yield. The proposed reaction mechanism is supported by semiempirical (AM1) MO calculations via FMO interactions. The observed selectivity was explained by an investigation of the transition states carried out also for analogous dispiroisoxazolines.     

Free radical reactions of carbohydrate derivatives in the synthesis of carbocyclic compounds. 1. Intramolecular C2–C6 cyclization of monosaccharides — A new route to substituted cyclopentanes

The feasibility of adopting a new approach to the preparation of chiral carbocyclic compounds has been demonstrated by experiment. Synthesis was achieved by way of intramolecular free radical C ₂ –C ₆ cyclization of carbohydrate derivatives, which produced compounds with quaternary C ₂ carbon atom having a strictly defined configuration.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117334 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 650–657, March, 1992.     

Stereoselectivity, periselectivity, and regioselectivity in the cycloadditions of 8-(p-chlorophenyl)-8-azaheptafulvene with cyclopentadiene and fulvenes

The stereoselectivity, periselectivity, and regioselectivity in the cycloaddition reactions of 8-(p-chlorophenyl)-8-azaheptafulvene with cyclopentadiene and symmetrical/unsymmetrical fulvenes is described.     

Adsorptive interaction between nitrogen compounds and organic and/or mineral phases in subsurface rocks. Models for compositional fractionation of pyrrolic nitrogen compounds in petroleum during petroleum migration

The results are reported of a range of laboratory chromatographic fractionation experiments with synthetic model compounds and a petroleum pyrrolic nitrogen fraction. Reversed phase separation of pyrrolic nitrogen compounds was governed mainly by the number of carbon atoms in the molecule, with little selectivity toward different positional isomers, whereas normal phase separation of the compounds could be explained in terms of steric effects related to alkylation position. Comparison of experimental results from model compounds with observations made previously using sets of natural samples taken from sedimentary basins clearly suggests adsorptive interactions between organic and mineral phases are involved in the compositional fractionation of pyrrolic nitrogen compounds in petroleum during migration. Detailed studies of the effects of petroleum migration on the molecular distribution of petroleum pyrrolic nitrogen compounds may provide useful, quantifiable, migration-related geochemical parameters.     

Knoevenagel condensation of cyclic ketones with benzoylacetonitrile and N,N′-dimethylbarbituric acid. Application of sterically hindered condensation products in the synthesis of spiro and dispiropyrans by hetero-Diels-Alder reactions

Inverse-electron demand Diels-Alder cycloadditions of sterically hindered cycloalkylidene derivatives of benzoylacetonitrile and N,N′-dimethylbarbituric acid with enol ethers, cyclic enol ethers and also sterically hindered cycloalkylidenecycloalkanes were investigated. New spiro, dispirodihydropyrans, spirouracils, and dispirouracils were obtained. To confirm the experimental results, frontier orbital HOMO and LUMO energies of heterodienes and dienophiles were calculated by semi-empirical AM1, PM3 methods and ab initio Hartree-Fock calculations.     

Oxygen replacement by fluorine in carbonyl derivatives of perfluoroaromatic compounds and isomerization of perfluoroindan-1,3-dione to perfluoro-3-methylenephthalide under the action of HF/SbF5

When acted upon by HF/SbF₅ at 95 °C, carbonyl groups of perfluorinated acetophenone (10), 3,4-dihydronaphthalen-1(2H)-one (8), 2,3-dihydronaphthalene-1,4-dione (9), benzocyclobutenone (6), benzocyclobutenedione (7) and indan-1-one (1) are converted into difluoromethylene groups to give the corresponding perfluoroaromatic products. Perfluoroindan-2-one (5), under the same conditions, is transformed to bis(perfluoroindan-2-yl) ether (21). On heating with HF/SbF₅, perfluoroindan-1,3-dione (2) isomerizes into perfluoro-3-methylenephthalide (4) at 95 °C, and gives 4,5,6,7-tetrafluoro-3-trifluoromethyl-phthalide (14) at 130 °C. Compound 4 in the absence of a solvent dimerizes giving perfluorodispiro[phthalide-3,1′-cyclobutane-2′,3″-phthalide] (18), and when heated with SbF₅ at 130 °C, it is converted into perfluoro-3-methylphthalide (3). When acted upon by HF/SbF₅ at 95 °C, perfluorinated benzoic acid (12) and phthalic anhydride (13) give the corresponding products with trifluoromethyl groups.     

Reactions between isocyanides and dialkyl acetylenedicarboxylates in the presence of 1,2-diacylhydrazines. One-pot synthesis of highly functionalized pyrazoles

The reactive 1:1 intermediate produced in the reaction between isocyanides and dialkyl acetylenedicarboxylates was trapped with 1,2-diacylhydrazines to yield highly functionalized pyrazoles in good yields.     

Comparison of the reactivity between 2- and 3-nitropyrroles in cycloaddition reactions. A simple indole synthesis

N-Tosyl-2-nitropyrroles react at high temperature with poorly and strongly activated dienes. They exhibit a dienophilic character similar to N-tosyl-3-nitropyrroles producing the corresponding indoles through a classical Diels-Alder process. A similar behaviour was observed in disubstituted N-tosyl-pyrroles.     

Gem-dinitro compounds in organic synthesis. 4. Use of the condensation product of glyoxal and dinitromethane in the synthesis of nitro-1,2,3-triazoles

The condensation of dinitromethane with glyoxal has been investigated and it has been demonstrated that 1,1,4,4-tetranitro-2,3-butandiol, -hydroxy-,-dinitropropionic acid or their mixture may be formed. Interaction of 1,1,4,4-tetranitro-2,3-butandiol or 1,4-dibromo-1,1,4,4-tetranitro-2,3-butanediol diacetates with sodium azide leads to bis(5-nitro-1,2,3-triazol-4-yl) via intermediate 1,1,4,4-tetranitro-1,3-butadiene.For communication 3, see [1].N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 2123–2131, September, 1992.     

Overloaded elution band profiles of ionizable compounds in reversed‐phase liquid chromatography: Influence of the competition between the neutral and the ionic species

The parameters that affect the shape of the band profiles of acido‐basic compounds under moderately overloaded conditions (sample size less than 500 nmol for a conventional column) in RPLC are discussed. Only analytes that have a single pK_a are considered. In the buffer mobile phase used for their elution, their dissociation may, under certain conditions, cause a significant pH perturbation during the passage of the band. Two consecutive injections (3.3 and 10 μL) of each one of three sample solutions (0.5, 5, and 50 mM) of ten compounds were injected on five C₁₈‐bonded packing materials, including the 5 μm Xterra‐C₁₈ (121 Å), 5 μm Gemini‐C₁₈ (110 Å), 5 μm Luna‐C₁₈(2) (93 Å), 3.5 μm Extend‐C₁₈ (80 Å), and 2.7 μm Halo‐C₁₈ (90 Å). The mobile phase was an aqueous solution of methanol buffered at a constant _W^WpH of 6, with a phosphate buffer. The total concentration of the phosphate groups was constant at 50 mM. The methanol concentration was adjusted to keep all the retention factors between 1 and 10. The compounds injected were phenol, caffeine, 3‐phenyl 1‐propanol, 2‐phenyl butyric acid, amphetamine, aniline, benzylamine, p‐toluidine, procainamidium chloride, and propranololium chloride. Depending on the relative values of the analyte pK_a and the buffer solution pH, these analytes elute as the neutral, the cationic, or the anionic species. The influence of structural parameters such as the charge, the size, and the hydrophobicity of the analytes on the shape of its overloaded band profile is discussed. Simple but general rules predict these shapes. An original adsorption model is proposed that accounts for the unusual peak shapes observed when the analyte is partially dissociated in the buffer solution during its elution.