Initial stages of hydroxide formation and its reduction on Co(0 0 0 1) studied by in situ STM and XPS in 0.1 M NaOH

In situ electrochemical scanning tunneling microscopy (STM) has been applied to study the initial stages of hydroxide formation and its reduction on Co(0 0 0 1) in 0.1 M NaOH. XPS investigations give chemical information about the adlayer composition after oxidation and at the different reduction stages. In the subpotential range of oxidation at E<−0.55 V (SHE) the formation of a Co(OH)₂(0 0 0 1) superstructure is observed. It shows a hexagonal symmetry with an average periodicity of P=1.25±0.20 nm. The coincidence cell of the observed structure consists of 16 unit cells Co(OH)₂(0 0 0 1) showing an average lattice parameter of a=0.33±0.05 nm and thus the Co(OH)₂ monolayer forms a 5 × 5 superstructure with respect to the underlying metallic Co(0 0 0 1) substrate. XPS results clearly prove the presence of hydroxide and exclude the formation of CoO in the subpotential range.At the very beginning of the reduction process small two-dimensional metal clusters and islands can be observed. It is assumed that they are crystallization nuclei for metal formation. They enlarge and grow together with other islands or larger terraces. During this reduction process two-dimensional adatomic arrays consisting of OH⁻-Co²⁺- OH⁻ trimers appear on the surface. Some of these trimers accumulate at step edges, and finally decorate them. This decoration builds up an energy barrier for further metal incorporation and prevents further growth of the terraces with remaining metal clusters on their surfaces. The reduction of the Co(OH)₂ layer is found to be not completed which is confirmed by XPS results.     

Bimodal growth of manganese silicide on Si(1 0 0)

Two different growth modes of manganese silicide are observed on Si(1 0 0) with scanning tunneling microscopy. 1.0 and 1.5 monolayer Mn are deposited at room temperature on the Si(1 0 0)-(2 × 1) substrate. The as-grown Mn film is unstructured. Annealing temperatures between room temperature and 450 °C lead to small unstructured clusters of Mn or Mn_xSi_y. Upon annealing at 450 °C and 480 °C, Mn reacts chemically with the Si substrate and forms silicide islands. The dimer rows of the substrate become visible again. Two distinct island shapes are found and identified as MnSi and Mn₅Si₃.     

Hydrogen adsorption on GaAs(0 0 1)-c(4 × 4)

Exposure of the As-terminated GaAs(0 0 1)-c(4 × 4) reconstructed surface to atomic hydrogen (H) at different substrate temperatures (50-480 °C) has been studied by reflection high-energy electron diffraction (RHEED) and scanning tunnelling microscopy (STM). Hydrogen exposure at low temperatures (∼50 °C) produces a disordered (1 × 1) surface covered with AsH_x clusters. At higher temperatures (150-400 °C) exposure to hydrogen leads to the formation of mixed c(2 × 2) and c(4 × 2) surface domains with H adsorbed on surface Ga atoms that are exposed due to the H induced loss of As from the surface. At the highest temperature (480 °C) a disordered (2 × 4) reconstruction is formed due to thermal desorption of As from the surface. The results are consistent with the loss of As from the surface, either through direct thermal desorption or as a result of the desorption of volatile compounds which form after reaction with H.     

Structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) reconstructions

We have performed the structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) surfaces in the submonolayer regime utilizing low-energy electron diffraction and scanning tunneling microscopy (STM). The almost identical series of one-dimensional chain structures (e.g., 3 × 2/3 × 1, 5 × 1, 7 × 1, 9 × 1, and 2 × 1 phases) are found in order of increasing metal coverage for both adsorbed systems, however, only the Eu/Si system reveals the ‘√3’-like reconstruction before the 2 × 1 endpoint phase. The atomic models of chain structures are proposed and discussed. In particular, our results suggest the odd-order n×1 (n=5,7,9,…) intermediate reconstructions to incorporate the Seiwatz chains and honeycomb chains with the proportion of m:1, where . The statistical analysis of STM images is carried out to examine the correlation of atomic rows on Eu/Si and Yb/Si surfaces. It is found that Eu stabilizes more ordered row configuration compared to Yb, which can be explained in terms of indirect electronic interaction of atomic chains or/and different magnetic properties of adsorbed species.     

Vibrational entropy-driven dealloying of Mo(1 0 0) and W(1 0 0) surface alloys

The formation and stability of Cu, Ag and Au-induced c(2 × 2) alloys at the Mo(1 0 0) and W(1 0 0) surfaces have been investigated with low-energy electron microscopy and diffraction. The ordered alloys transform to disordered overlayer structures at elevated temperature. Comparison of the transformation temperatures with energetics obtained from first principles calculations reveals the vibrational entropic contribution to the system free energy that defines alloy thermal stability. Effective Debye temperatures for metal adatoms are determined that exhibit the expected mass and bond strength dependence.     

Tl/Ge(1 0 0) system: Phase formation and phase transitions

Using scanning tunneling microscopy, phase formation and temperature-driven phase transitions in Tl/Ge(1 0 0) system have been studied. Evolution of Tl overlayer structure has been considered for three temperature ranges, including around room temperature (RT), high-temperature (HT) (350-450 K) and low-temperature (LT) (20-100 K) ranges. Upon RT growth, a 2 × 1-Tl phase develops in submonolayer range and is completed at around 1 ML of Tl. Cooling of the RT-deposited Tl overlayer results in formation of a set of various LT structures. These are 1D chains, 5 × 4-Tl and “stroked” phases observed in submonolayer range and a long-period c(12 × 14)-Tl phase developed at around 1 ML. All transitions between these RT and LT structures are reversible. At doses beyond 1 ML, RT deposition of Tl onto Ge(1 0 0) leads to the growth of second-layer Tl stripes, forming arrays with a 1 × 4 periodicity. Meanwhile, structure of the first layer also changes and it displays a set of various reconstructions, c(2 × 8), c(10 × 6) and c(10 × 7). All these structures remain unchanged upon cooling to LT. Growth at HT as well as heating of RT-deposited Tl overlayer irreversibly produces 3 × 2-Tl phase whose rows become decorated by second-layer Tl stripes at prolonged Tl deposition.     

Epitaxial growth of ultra-thin NiO films on Cu(1 1 1)

The very first stages of the growth of NiO on Cu(1 1 1) is examined on a microscopic scale. The paper focuses on the morphological and structural characterization of nanostructures formed in the 0-1 Å thickness range. Ultra-thin NiO films, obtained through evaporation of a Ni rod under an oxygen atmosphere were grown at 550 K. In the early stages of the growth the oxide film morphology shows 10-30 nm large, monolayer high, islands with a partial incorporation of metallic Ni in the first Cu(1 1 1) surface plane. The first layer is formed by an epitaxial atomic layer exhibiting a STM contrast similar to the one observed on adsorbed oxygen on Cu(1 1 0). A NiO cluster nucleation and coalescence mechanism is proposed in order to explain the formation of the second NiO layer. A α-Ni₂O₃ hexagonal phase, or a structural distortion of the NiO(1 1 1)()R30° structure could both explain the complex LEED patterns.     

Regular step formation on concave-shaped surfaces on 6H–SiC(0 0 0 1)

A concave-shaped surface has been prepared in a 6H–SiC(0 0 0 1) substrate by mechanical grinding. As a consequence, the different crystallographic planes building up the 6H–SiC polytype are cut under continuously changing polar angles in all azimuthal directions. Through hydrogen etching, this curved surface breaks up into a whole set of surfaces vicinal to the initial 6H(0 0 0 1) orientation. The local structural reorganisation after hydrogen etching has been studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Two types of local bond environments are present at the step edges leading to a strong anisotropy in the surface etching with hydrogen. As a result, the distribution of the terrace width and the step heights varies with the azimuthal angle and reflects the sixfold symmetry of the bulk crystal. For most azimuthal directions, an alternation of large and small terraces, separated by steps of 0.75 nm heights (height of half the 6H polytype, three bilayers) is observed and only for well defined azimuthal directions, equally spaced terraces separated by steps of 1.5 nm height (one unit cell of 6H–SiC, six bilayers) are found. In addition, the polar variations have been studied by taking various line-scans along the concave-shaped surface with AFM. It seems that for polar angles above 3°, step bunching of several SiC steps occurs whereas below 3° the bimodal terrace width distribution is observed.     

Observation of double- to single-domain transition on the Eu/Si(1 0 0) surface by LEED and STM

The orientational phase diagram and morphology of the Eu-adsorbed Si(1 0 0) surface miscut by 0.4° have been studied by low-energy electron diffraction and scanning tunneling microscopy. We demonstrate that the original double-domain configuration with single-layer steps on the Si(1 0 0) substrate can be drastically broken at 0.4 monolayer (ML) of Eu. At this coverage, the ordered domain pattern formed by topographically non-equivalent terraces with Eu-induced 2 × 3 and “2 × 1” (so-called “wavy” structure) reconstructions is found, while no orthogonal 3 × 2 and “1 × 2” domains are observed. A model of the single-domain surface is proposed. The origin of the double- to single-domain transition found for the Eu/Si(1 0 0) system is discussed.     

Decay of nano-islands located on Au(1 0 0) electrode in room temperature molten salt (EMImBF4)

The behaviour of nano-islands located on an Au(1 0 0) single crystal surface in contact with a room temperature molten salt, that is, 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF₄), has been investigated using electrochemical atomic force microscopy (EC-AFM) under potential control. It was found from the in situ EC-AFM observations that a nano-island located on an Au(1 0 0) electrode collapses in EMImBF₄ in the potential range between −1.05 and 0.2 V (vs. Ag/Ag⁺ in EMImBF₄). It was also found that the nano-islands decay faster when the Au(1 0 0) electrode potential is more positive. These in situ EC-AFM observations reveal that the behaviour of the nano-island in the EMImBF₄ shown above is quite similar to that observed in a sulfuric acid aqueous solution.     

Self-assembly formation of the ordered nanostructure arrays induced by Be interaction with Si(1 1 1) surface

Formation of the beryllium (Be) submonolayers on the Si(1 1 1)7 × 7 surface has been studied using scanning tunneling microscopy. It has been found that Be interaction with Si(1 1 1) at 500-700 °C results in a self-assembly formation of the four various types of the highly-ordered nanostructure arrays. The nanostructure arrays develop on top of the “soft” silicide layer, which period and orientation alter with the nanostructure growth: the shorter the nanostructure period, the larger the rotation angle. The main structural parameters of the silicide layer and nanostructure arrays have been established.     

Hydrogen adsorption and diffusion on Pd(1 1 1)

The adsorption, diffusion and ordering of hydrogen on Pd(1 1 1) was studied by scanning tunneling microscopy in the temperature range of 37-90 K. At low coverage isolated hydrogen atoms were observed. They formed √3×√3-1H islands as the coverage increased. Above 1/3 monolayer (ML) coverage areas of a new phase with √3×√3-2H structure were formed, with both structures coexisting between 1/3 and 2/3 ML. Finally a 1 × 1 structure was formed after high exposures of hydrogen above 50 K, with a coverage close to 1 ML. Atomically resolved images reveal that H binds to fcc hollow sites.     

Atomic structure of Bi-dimer row selectively adsorbed on Si(5 5 12)-2 × 1 surface

In order to understand the atomic structure of nanostructures self-assembled on the template with one-dimensional symmetry, Bi/Si(5 5 12) system has been chosen and Bi-adsorption steps have been studied by STM. With Bi adsorption, the clean Si(5 5 12) is transformed to (3 3 7) terraces with disordered boundary due to mismatched periodicities between (3 3 7) and (5 5 12), and Bi-dimer rows are formed inside the (3 3 7) unit as follows: Initially, when Bi atoms are deposited at the adsorption temperature of about 450 °C, they selectively replace Si-dimers and Si-adatoms and form adsorbed Bi-dimers and Bi-adatoms, respectively. If additional Bi is supplied, the Bi-dimers adsorb on the Bi-dimers and Bi-adatoms in the first layer. These adsorbed dimers in the second layer are facing each other to form a Bi-dimer pair with relatively stable p³bonding. Finally, a single Bi-dimer adsorbs above the Bi-dimer pair in the second layer, at which point the Bi layer thickness saturates. It has been concluded that the Bi-dimer pair with stable p³ bonding is the composing element in the second layer and such site-selective adsorption is possible due to the substrate-strain relaxation through inserting Bi-buffer layer limited to specific sites of the substrate.     

Room temperature observation of nitric oxide on Ir(1 1 1) by scanning tunneling microscopy

Room temperature (RT) adsorption of nitric oxide (NO) on Ir(1 1 1) was studied by scanning tunneling microscopy (STM). At low exposures, NO molecules can not be imaged by STM, because at RT the diffusion of NO is much faster than the STM scanning speed. At high exposures near the saturation coverage, however, a well-ordered 2 × 2 structure is observed. The coverage of the major 2 × 2 species is 0.25 and they can be assigned to the NO molecules adsorbed on the Ir ontop sites. A small number of less bright spots are assigned to nitrogen atoms produced by dissociation. Their number increases by annealing the NO-saturated surface at 380 K. A small number of another dissociation product, oxygen, are observed as black lines, indicating that the diffusion of oxygen atoms is fast. Scratch-like noise features were also detected by the STM, which suggests that a mobile precursor state exists, which was clearly shown by the effects of electron irradiation from the STM tip. These results are consistent with the previous molecular beam studies. Hopping of the 2 × 2 ordered NO species was frequently observed at the anti-phase domain boundaries and edges of the 2 × 2 islands.     

First-principles study of indium on silicon (1 0 0)—the structure, defects and interdiffusion

The atomic structures of indium (In) on silicon (Si) (1 0 0)-(2 × 1) surface are investigated by the local density approximation using first-principles pseudopotentials. Total energy optimizations show that the energetically favored structure is the parallel ad-dimer model. The adsorption energy of In on ideal Si(1 0 0)-(1 × 1) surface is significantly higher than that on reconstructed Si(1 0 0)-(2 × 1) surface, suggesting that In adsorption does not break the Si-Si dimer bond of the substrate. When Si surface contains single dimer vacancy defects, In chain will be interrupted, leading to disconnected In nanowires. Displacive adsorption of In on Si(1 0 0) is also considered, and the calculation suggests that interdiffusion of In into Si substrate will not be favorable under equilibrium conditions.     

Reversible local-modification of surface structure on clean Ge(0 0 1) by scanning tunneling microscopy below 80 K

The structure of the clean Ge(0 0 1) surface is locally and reversibly changed between c(4×2) and p(2×2) by controlling the bias voltage of a scanning tunneling microscopy (STM) below 80 K. It shows hysteresis for the direction of the sample bias voltage change. The c(4×2) structure is observed with the sample bias voltage V_b?−0.7 V. This structure is maintained at V_b?0.7 V with increasing the bias voltage from −0.7 V. When V_b is higher than 0.8 V, the structure changes to p(2×2). This structure is then maintained at V_b?−0.6 V with decreasing the bias voltage from +0.8 V. The area of the structure change can be confined in the single dimer row just under the STM tip using a bias voltage pulse. In particular, the minimum transformed length is four dimers along the dimer row in the transformation from p(2×2) to c(4×2). The observed local change of the reconstruction with hysteresis is attributed to the energy transfer process from the tunneling electron to the Ge lattice in the local electric field due to the STM bias voltage. A phenomenological model is proposed for the structure changes. It is based on a cascade inversion of the dimer buckling orientation along the dimer row.     

STM observation of initial growth of Sn atoms on Ge(0 0 1) surface

We have studied initial growth of Sn atoms on Ge(0 0 1) surfaces at room temperature and 80 K by scanning tunneling microscopy. For Sn deposition onto the Ge(0 0 1) substrate at room temperature, the Sn atoms form two kinds of one-dimensional structures composed of ad-dimers with different alignment, in the 〈3 1 0〉 and the 〈1 1 0〉 directions, and epitaxial structures. For Sn deposition onto the substrate at 80 K, the population of the dimer chains aligning in the 〈3 1 0〉 direction increases. The diffusion barrier of the Sn adatom on the substrate kinetically determines the population of the dimer chain. We propose that the diffusion barrier height depends on surface strain induced by the adatom. The two kinds of dimer chains appearing on the Ge(0 0 1) and Si(0 0 1) surfaces with adatoms of the group-IV elements are systematically interpreted in terms of the surface strain.     

Diverse magic nanoclustering in submonolayer Tl/Si(1 1 1) system

Using scanning tunneling microscopy, ordered magic nanoclustering in the submonolayer Tl/Si(1 1 1)7 × 7 system has been studied. In contrast to the other known metal/silicon systems where ordered magic nanoclustering takes place, the Tl/Si(1 1 1) system has been found to be the only one to exhibit the diverse magic clustering. In the present study, occurrence of, at least, three distinct types of the well-defined Tl/Si(1 1 1) magic clusters has been detected.     

Study of c(2 × 2)-MnAu(0 0 1) layers on Mn(0 0 1) by means of scanning tunneling microscopy/spectroscopy

Intermixing, growth, geometric and electronic structures of gold films grown on antiferromagnetic stacking body-centered-tetragonal manganese (0 0 1) films were studied by means of scanning tunneling microscopy/spectroscopy at room temperature in ultra-high vacuum. We found stable ordered c(2 × 2)-MnAu(0 0 1) alloy layers after depositing Au on pure Mn layers. Since at the fourth layer (5 × 23)-like Au reconstruction appears instead of the c(2 × 2) structure and local density of states peaks obtained on the c(2 × 2)-MnAu surface disappear, pure Au layers likely grow from the fourth layer.     

Atomic structure of the Si(5 5 12)-2 × 1 surface

Based on the results of scanning tunneling microscopy studies of the reconstructed Si(5 5 12)-2 × 1 surface, its atomic structure has been found. It turns out that Si(5 5 12)-2 × 1 consists of four one-dimensional structures: honeycomb (H) chain, π-bonded H′ (π) chain, dimer-adatom (D/A) row, and tetramer (T) row. Its period is composed of three subunits, i.e., (i) (3 3 7) unit with a D/A row [D(3 3 7)], (ii) (3 3 7) unit with a T row [T(3 3 7)], and (iii) (2 2 5) unit with both a D/A and a T row. Two kinds of adjacent subunits, T(3 3 7)/D(3 3 7) and D(3 3 7)/(2 2 5), are divided by H chains with 2× periodicity due to buckling, while one kind of adjacent subunits, T(3 3 7)/(2 2 5), is divided by a π chain with 1× periodicity. Two chain structures, H and π chains, commute with each other depending upon the external stresses perpendicular to the chain, which is the same for two row structures, D/A and T rows. It can be concluded that the wide and planar reconstruction of Si(5 5 12)-2 × 1 is originates from the stress balance among two commutable chains and two commutable rows.