Sulfide oxygenation by tert-butyl hydroperoxide with mononuclear (Me3TACN)Mn catalysts

Mononuclear (Me₃TACN)MnX₃ compounds, where X is Cl⁻, Br⁻, or N₃⁻, and Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane, have been tested for catalyzing both sulfide oxygenation and styrene epoxidation by tert-butyl hydroperoxide (TBHP) and display turnover frequencies (TOF) up to 200 h⁻¹ at room temperature. Sulfoxides or sulfones may be produced selectively by varying reaction conditions. Product distribution from the oxygenation reactions of ethyl phenyl sulfide, 2-chloroethyl phenyl sulfide, and styrene is consistent with a mechanism involving an early single-electron transfer (SET) step.     

Au(I)/Ag(I)-catalyzed annulation of sugar aldehyde tethered with 3-phenylprop-2-yn-1-yl ether with aryl amines for the pyrano[4,3-b]quinoline derivatives

Aryl amines undergo smooth annulation with O-phenylpropynyl sugar aldehyde in the presence of the Ph₃PAuCl (10 mol %)/AgSbF₆ (10 mol %) catalytic system to afford the corresponding tetrahydro-3aH-spiro[[1,3]dioxolo[4″,5″:4′,5′]furo[3′,2′:5,6]pyrano[4,3-b]quinoline-2,1′-cyclohexane] derivatives in good yields and selectivity.     

Controlled vinyl-addition-type polymerization of norbornene initiated by several cobalt complexes having substituted terpyridine ligands

A series of cobalt(II) complexes having terpyridine derivatives such as 2,2^′:6^′,2″-terpyridine (1), 4,4^′,4″-^tBu₃-2,2^′:6^′,2″-terpyridine (2), 5,5″-Me₂-2,2^′:6^′,2″-terpyridine (3), 6,6″-Me₂-2,2^′:6^′,2″-terpyridine (4) and 6,6″-(3,5-Me₂C₆H₃)₂-2,2^′:6^′,2″-terpyridine (5) was synthesized. The structures of 1, 3, and 4 were confirmed by X-ray crystallography. The coordination sphere around the cobalt center in 1 can be described as pseudo square pyramidal. On the other hand, complex 4 has pseudo trigonal bipyramidal structure. Upon activation with d-MAO (dried-methylaluminoxane), these complexes showed high activities for the polymerization of norbornene (NBE). In particular, polymerization of NBE with 4/d-MAO system at room temperature resulted in quantitative yield within several hours to give the polymers with relatively narrow molecular weight distributions and controlled molecular weight. The polymerizations of NBE with these cobalt catalyst systems proceeded in vinyl addition polymerization, which was confirmed by ¹H NMR spectra of the resulting polymers.     

Facile oxygenation of organic sulfides with H2O2 catalyzed by Mn-Me3TACN compounds

Two binuclear Mn-Me₃TACN (Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane) compounds catalyze the oxygenation of organic sulfides utilizing H₂O₂ under ambient conditions. Both phenyl sulfide and ethyl phenyl sulfide were converted to the corresponding sulfones and chloroethyl phenyl sulfide proceeds to its elimination product of phenyl vinyl sulfone.     

Rearrangements in the Scholl oxidation: implications for molecular architectures

Rearrangements readily occur in Scholl oxidations and interfere with the construction of certain molecular architectures. 3,3?,4,4′,4″,4?,5′,5″-Octamethoxy-1,1′,2′,1″,2″,1?-quaterphenyl and 3,3?,4,4′,4′′,4?,5′,5′-octamethyl-1,1′,2′,1″,2″,1?-quaterphenyl, which were conceived as precursors to benzenoid strips, rearranged under Scholl conditions to the unexpected C_2v-substituted products 1,2,5,6,9,10,12,13-octamethoxydibenzo[fg,op]naphthacene and 1,2,5,6,9,10,12,13-octamethyldibenzo[fg,op]naphthacene. This corrects a widely propagated error in the literature in which the assignments of 1,2,5,6,9,10,12,13-octamethoxydibenzo[fg,op]naphthacene (C_2v) and 1,2,5,6,8,9,12,13-octamethoxydibenzo[fg,op] naphthacene (C_2h) are crossed. A mechanism involving the migration of an aryl ring on an arenium cation intermediate is proposed.     

Synthesis of B-trisubstituted borazines via the rhodium-catalyzed hydroboration of alkenes with N,N′,N″-trimethyl or N,N′,N″-triethylborazine

Hydroboration of terminal and internal alkenes with N,N′,N″-trimethyl- and N,N′,N″-triethylborazine was carried out at 50 °C in the presence of a rhodium(I) catalyst. Addition of dppb or DPEphos (1 equiv.) to RhH(CO)(PPh₃)₃ gave the best catalyst for hydroboration of ethylene at 50 °C, resulting in a quantitative yield of B,B′,B″-triethyl-N,N′,N″-trimethylborazine. On the other hand, a complex prepared from (t-Bu)₃P (4 equiv.) and [Rh(coe)₂Cl]₂ gave the best yield for hydroboration of terminal or internal alkenes.     

Syntheses and structures of bowl-shaped triarylphosphines and their palladium(II) complexes

Novel bowl-shaped triarylphosphines, tris(2,2″,6,6″-tetraalkyl[1,1′:3′,1″-terphenyl]-5′-yl)phosphines (TRMP: alkyl = methyl; TRIP: alkyl = isopropyl), were prepared by lithiation of the corresponding m-terphenyl bromides followed by reaction with PCl₃. X-ray crystallographic analysis revealed that the phosphorus center of TRMP is embedded in the shallow bowl-shaped cavity of 16 Å diameter and 2.1 Å depth formed by three radially extended m-terphenyl units. Its cone angle was estimated to be as large as 174°. In the crystal structure of TRIP, the depth of the cavity and cone angle increased to 3.3 Å and 206°, respectively, because of the different arrangement of the m-terphenyl units. In contrast with TRMP, which can form the mononuclear complex, PdCl₂(TRMP)₂ (6), in the reaction with PdCl₂, treatment of TRIP (1 or 3 eq.) with PdCl₂ produced the trinuclear palladium(II) chloride complex, [(PdCl₂)₃(TRIP)₂] (8), as a single product. X-ray crystallography established the structure of 8, where the trimer of PdCl₂ is terminated by two TRIP ligands. The formation of the different types of PdCl₂ complexes was explained in terms of the difference in the cavity shape of TRMP and TRIP.     

Synthesis and liquid crystal properties of a novel family of oligothiophene derivatives

In order to develop novel oligothiophene-based liquid crystals capable of hydrogen bonding, new terthiophene derivatives containing an alkylamide group, N,N′-dialkyl-5,5″-dichloro-2,2′:5′,2″-terthiophene-4,4″-dicarboxamide (DNC_nDCl3T, n=8, 18), N,N′-dialkyl-5,5″-dibromo-2,2′:5′,2″-terthiophene-4,4″-dicarboxamide (DNC_nDBr3T, n=5, 8, 16, 18), or N,N′-dialkyl-5,5″-diiodo-2,2′:5′,2″-terthiophene-4,4″-dica-rboxamide (DNC_nDI3T, n=8, 18), were designed and synthesized, and their thermal behaviour was examined. It was found that DNC₁₈DCl3T, DNC₁₈DI3T and DNC_nDBr3T (n=8, 16, 18) form a smectic A phase and that the alkyl chain length greatly affects liquid crystal phase formation. The absence of liquid crystallinity in the corresponding ester derivatives suggests that intermolecular hydrogen bonding also plays a role in the formation of a liquid crystal phases in the DNC_nDBr3T system.     

Optically active pentacyclic binuclear diorganotin compounds

Three optically active binuclear diorganotin compounds (2-4) were prepared from an optically active oxalamide: (1S,2R)-(−)-[N-(2-hydroxy-1-methyl-2-phenyl-ethyl)-N′-(2-hydroxy-phenyl)-oxalamide (1). The new compounds [1-(2′,2′-diorganyl-1′-oxa-3′-aza-2′-stanna-indan-3′-yl)-2-(2″,2″-diorganyl-4″-methyl-5″-phenyl[1,3,2]-oxazastannolidin-3″-yl)-ethane-1,2-dione {organyl = methyl (2), n-butyl (3) or phenyl (4)} were characterized by IR, elemental analysis and mass spectrometry. Compounds 3 and 4 were submitted to a detailed NMR study in order to assign their resonances (¹H and ¹³C) and specially the two different ¹¹⁹Sn signals for each compound. The X-ray diffraction analysis of compound 4 showed a planar pentacyclic framework with two penta-coordinated tin atoms with a distorted tbp geometry and 12 intramolecular hydrogen bonds.     

New soluble aromatic polyamides containing ether linkages and laterally attached p-terphenyls

Two series of new polyamides containing flexible ether linkages and laterally attached side rods (3a-i and 4a-i) were synthesized from 2^′,5^′-bis(4-aminophenoxy)-[1,1^′;4^′,1^″]terphenyl (1a) and 2^′,5^′-bis(4-amino-2-trifluoromethylphenoxy)-[1,1^′;4^′,1^″]terphenyl (1b), respectively, with various aromatic dicarboxylic acids by the direct phosphorylation polycondensation. The polymers were produced with high yields and moderate to high inherent viscosities (0.41-0.97 dl/g) that corresponded to weight-average molecular weights (by size exclusion chromatography) of 47,000-65,000. Except for some polyamides that derived from rigid diacids, the obtained polyamides were readily soluble in aprotic polar solvents, such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc), and could afford flexible and tough films via solvent casting. The polymer films cast from DMAc solutions possessed tensile strengths of 85-106 MPa and initial moduli of 1.82-2.96 GPa. These polyamides showed glass-transition temperatures (T_g) in the range of 206-263 °C (by DSC) and softening temperatures (T_s) in the range of 211-253 °C (by TMA). Decomposition temperatures (T_d) for 10% weight loss all occurred above 400 °C (by TGA) in both nitrogen and air atmospheres. The polyamides 4a-i derived from trifluoromethyl-substituted diamine 1b generally showed a higher solubility, T_g and T_s but lower thermal stability as compared to the analogous polyamides 3a-i based on diamine 1a.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Cycloalkano[1″,2″:4,5;4″,3″:4′,5′]bis(pyrrolo[2,3-c]pyrimido[5,4-e]pyridazines): synthesis, structure and mechanism of their formation

Reactions of 3-alkylamino-6,8-dimethylpyrimido[4,5-c]pyridazine-5,7(6H,8H)-diones with cyclohexyl- and cycloheptylamines in the presence of AgPy₂MnO₄ produce novel cycloalkano[1″,2″:4,5;4″,3″:4′,5′]bis(pyrrolo[2,3-c]pyrimido[5,4-e]pyridazines). Detailed information concerning the scope and mechanism of these transformations is discussed.     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Synthesis, structures and electrochemical properties of ruthenium (II) complexes bearing bidentate 1,8-naphthyridine and terpyridine analogous (N,N,C)-tridentate ligands

1,8-Naphthyridine (napy) and terpyridine-analogous (N,N,C) tridentate ligands coordinated ruthenium (II) complexes, [RuL(napy-κ²N,N′) (dmso)](PF₆)₂ (1: L=L¹=N″-methyl-4′-methylthio-2,2′:6′,4″-terpyridinium, 2: L = L² = N″-methyl-4′-methylthio-2,2′:6′,3″-terpyridinium) were prepared and their chemical and electrochemical properties were characterized. The structure of complex 1 was determined by X-ray crystallographic study, showing that it has a distorted octahedral coordination style. The cyclic voltammogram of 1 in DMF exhibited two reversible ligand-localized redox couples. On the other hand, the CV of 2 shows two irreversible cathodic peaks, due to the Ru-C bond of 2 containing the carbenic character. The IR spectra of 1 in CO₂-saturated CH₃CN showed the formation of Ru-(η¹-CO₂) and Ru-CO complexes under the controlled potential electrolysis of the solution at −1.44 V (vs. Fc/Fc⁺). The electrochemical reduction of CO₂ catalyzed by 1 at −1.54 V (vs. Fc/Fc⁺) in DMF-0.1 M Me₄NBF₄ produced CO with a small amount of HCO₂H.     

Preparation, characterization and structure of ruthenium phosphine complexes containing non-innocent ligands

Phosphine ruthenate complexes containing the non-innocent ligands 4-chloro-1,2-phenylenediamine (opda-Cl) and 3,3′,4,4′-tetraamminebiphenyl (diopda) were synthesized and characterized by means of X-ray diffraction, electrochemistry, ³¹P{¹H} NMR and electronic spectroscopies. Crystals of cis-[RuCl₂(dppb)(bqdi-Cl)] complex were isolated as a mixture of two conformational isomers due to different positions of the chlorine atoms of the o-phenylene ligand in relation to the P1 atom of the phosphine moiety.     

Heavier alkali metal complexes of the bulky alkyl ligand 2-(bis(trimethylsilyl)methyl)-6-methylpyridine: Crystal structures of [{6-Me(2 Pyr)}(Me3Si)2CNa(pmdta)] and [{6-Me(2-Pyr)}(Me3Si)2CK]∞

Reaction of the bulky pyridyl based ligand 6-Me(2-Pyr)(Me₃Si)₂CH with ⁿBuM (M = Na, K) in the presence of the N donors pmdta (N,N′,N′,N″,N″ pentamethyldiethylenetriamine) and tmeda (N,N,N′,N′ tetramethylethylenediamine) resulted in the formation and crystallisation of the heavy alkali metal complexes, [{6-Me(2-Pyr)}(Me₃Si)₂CNa(pmdta)], 1, and [{6-Me(2-Pyr)}(Me₃Si)₂CK]_∞, 2. Single crystal X-ray diffraction studies show the sodium complex, 1, to be monomeric with a six coordinate metal centre, while the unsolvated potassium complex, 2, is polymeric, involving repeating η³ 1-aza-allyl and allylic interactions of the pyridyl moiety with the potassium cation.     

Synthesis of N-substituted cyclic triglycines and their response to metal ions

N,N^′,N^″-Trisubstituted-cyclo-triglycines were synthesized. The major conformation of these compounds has C₃ symmetry, and the carbonyl groups and substituents on the nitrogen are inclined in the same direction. Their response to various metal ions was estimated by constructing ion-selective electrodes. Two of them responded selectively to Ca²⁺ over other cations, demonstrating that N,N^′,N^″-trisubstituted-cyclo-triglycines provide a new scaffold to act as host molecules.     

Unexpected formation of the copper(II) dinuclear mixed-ligand species in the ternary system of N,N,N′,N″,N″-pentamethyldiethylenetriamine with methionine- or histidinehydroxamic acids in aqueous solution

Equilibrium studies of the mixed-ligand complexes of the copper(II) ion with pentamethyldiethylenetriamine (N,N,N′,N″,N″-pentamethyl-[bis(2-aminoethyl)amine], Me₅dien) as a primary ligand and methioninehydroxamic acid (2-amino-4-(methylthio)butanehydroxamic acid, Metha) or histidinehydroxamic acid (2-amino-3-(4′-imidazolyl)propanehydroxamicacid, Hisha) as a secondary ligand L were performed by potentiometric titration, UV–Vis and EPR spectroscopy. The results show that in these ternary systems the dinuclear [Cu₂(Me₅dien)L₂H₋₁]⁺ mixed-ligand species is formed as a predominant one in the basic solution. The monouclear [Cu(Me₅dien)L]⁺ species is formed in low concentration. Our spectroscopic results indicate that the geometry of these mixed-ligand five-coordinate complexes is strongly distorted towards trigonal-bipyramidal.     

An improved synthesis of deuterated Schöllkopf’s bis-lactim ether and its use for the asymmetric synthesis of (R)-[α-2H]-phenylalanine methyl esters

Treatment of (S)-3-isopropyl-2,5-dimethoxy-3,6-dihydropyrazine with trifluoroacetic acid in MeOD results in regioselective deuteration at its C₆-position affording its corresponding (S)-[6-²H₂]-isotopomer in excellent yield with no loss of stereochemical integrity at its C₃-stereocentre. The lithium aza-enolate of this deuterated chiral template has been alkylated with a range of substituted benzyl bromides to afford (3S,6R)-[6-²H]-3-isopropyl-6-benzyl-bis-lactim ethers that were hydrolysed to afford their corresponding (R)-[α-²H]-phenylalanine methyl esters as hydrochloride salts in good yield.     

The synthesis and properties of ferroceno[1′,2′;1″,2″]bis(1,3-dithiol-2-thione and -2-one) derivatives

The t-butyl and bis(t-butyl) derivatives of hexathia[3.3]ferrocenophane were prepared from the corresponding trithia[3]ferrocenophanes. The former was a mixture of chair-chair and chair-boat isomers, and the latter existed only chair-boat isomer. The hexathia[3.3]ferrocenophanes were led to the tetrathiols with LiAlH₄, which allowed to react with 1,1′-thiocarbonyldiimidazol to give the corresponding ferroceno[1′,2′;1″,2″]bis(1,3-dithiol-2-thione) derivatives. Mono t-butyl and unsubstituted analogs were prepared in a similar manner. The X-ray structural determination showed that these derivatives adopted the conformation in which the 1,3-dithiol-2-thione rings were heaped on top of each other. In the crystal of ferroceno[1′,2′;1″,2″]bis(1,3-dithiol-2-thione), the molecules packed so as to put the axis of molecule in order and to overlap one another above and below. The desulfurizative coupling of the ferroceno[1′,2′;1″,2″]bis(1,3-dithiol-2-thione) derivatives was unsuccessful.