First isolation of 1,2-dithietan-3-one from α-dithiolactone

Treatment of α-dithiolactone 6 with ethoxycarbonylformonitrile oxide 7 resulted in the formation of 1,2-dithietan-3-one 4. Compound 4a was oxidized with m-CPBA to give 4,4-di-tert-butyl-1,2-dithietan-3-one 1-oxide 5a. The reaction of 4a with triphenylphosphine afforded the corresponding α-thiolactone 10.     

Efficient synthesis of new chiral 1,2-benzothiazin-3-one 1,1-dioxide derivatives via lateral lithiation of 3-N-mesitylenesulfonyl-1,3-oxazolidin-2-ones

Chiral 3-N-mesitylenesulfonyl-1,3-oxazolidin-2-ones 4a-e derived from (l)- and (d)-amino acids 1a-e undergo lateral lithiation with lithium diisopropylamide and TMEDA in anhydrous THF to provide new optically-active 1,2-benzothiazin-3-one 1,1-dioxide derivatives 5a-e with yields ranging from 63% to 79%.     

Synthesis and photochemistry of 3-(o-stilbeneyl)-4-H/Me/Ph-sydnones; intramolecular cyclization to 1,2-benzodiazepines and/or quinolines

Stilbeneylsydnone derivatives were synthesized by a sequence of reactions in good yields. Irradiation of 3-stilbeneyl-4-methylsydnone 4 gives 1H-1,2-benzodiazepine derivative 7 as the main product along with 2-methylquinoline derivative 20. Irradiation of 3-stilbeneyl-4-phenylsydnone 5 afforded only 1H-1,2-benzodiazepine derivative 8 whereas on irradiation of 4-unsubstituted 3-stilbeneylsydnone 3 no benzodiazepine derivative was detected. An efficient novel photochemical approach to 1H-1,2-benzodiazepines has been found from the new 3-(o-stilbeneyl)-4-substituted-sydnones via intramolecular 1,7-electrocyclization reaction of the photogenerated nitrile imines.     

A facile synthesis of pyrrolo[1,2-a]benzimidazoles and pyrazolo[3,4:4′,3′]pyrrolo[1,2-a]benzimidazole derivatives

Reaction of 2-cyanomethylbenzimidazole 1 with hydrazonoyl halides 2 led to formation of pyrrolo[1,2-a]benzimidazole derivatives 7. Similar reaction of 1 with halides 3 afforded 5-amino-4-(benzimidazol-2-yl)pyrazole derivatives 11 or 1-amino-2-arylpyrazolo[3,4:4′,3′]pyrrolo[1,2-a]benzimidazol-4-one 14 depending on the reaction conditions. The mechanisms of the studied reactions are discussed.     

Synthesis of sulfur-substituted quinolizidines and pyrido[1,2-a]azepines by ring-closing metathesis

Sulfur-substituted quinolizidines and pyrido[1,2-a]azepines (7) can be prepared by ring-closing metathesis (RCM) of 4-(phenylthio)-1,2,5,6-tetrahydropyridin-2-ones (6) bearing terminal alkenyl groups at both N-1 and C-6 positions, which are obtained from 3-(phenylthio)-3-sulfolene (1) in four steps. Some synthetic transformations of 2-(phenylthio)-1,6,9,9a-tetrahydroquinolizin-4-one (7a) and 2-(phenylthio)-1,6,9,10,10a-pentahydropyrido[1,2-a]azepin-4-one (7d) are also reported.     

Synthesis of alkylphenanthrenes from naphthylalkylidenemalonodinitriles. A route to 1-methyl-, 2-methyl-, and 1,2-dimethylphenanthrene

The study has been carried out to evaluate the feasibility of synthesis of 1-methyl-, 2-methyl-, 1,2-dimethyl-, and 1-ethyl-2-methylphenanthrene through the annulation of the naphthalene system with the exploitation of the dicyanovinyl moiety of 2-naphthylalkylidenemalonodinitriles as an active electrophile in cold solutions of concentrated sulfuric acid. 2-(2-Naphthyl)propanal (3), 1-(2-naphthyl)propan-2-one (9), 3-(2-naphthyl)butan-2-one (14), and 3-(2-naphthyl)pentan-2-one (19) had been condensed with malonodinitrile to afford 2-naphthylalkylidenemalonodinitriles which were then cyclised to give 4-amino-1-methylphenanthrene-3-carbonitrile (5), 4-amino-2-methylphenanthrene-3-carbonitrile (11), 4-amino-1,2-dimethylphenanthrene-3-carbonitrile (16), and 4-amino-1-ethyl-2-metylphenanthrene-3-carbonitrile (21). The nitrile function has been removed from the aminonitriles, with the exception of 21, through hydrolysis and decarboxylation in alkaline ethanolic solutions under elevated pressure (∼3 MPa) and temperature 220-230°C to give the respective 4-amino-methylphenanthrenes. Diazotisation of the phenanthreneamines and the reaction with hypophosphorus acid has lead to the methylphenanthrenes in moderate yields (50-52%).     

Syntheses of metabolites of ethyl 4-(3,4-dimethoxyphenyl)-6,7-dimethoxy-2-(1,2,4-triazol-1-ylmethyl)quinoline-3-carboxylate (TAK-603)

Convenient and efficient syntheses of ethyl 4-(3-hydroxy-4-methoxyphenyl)-6,7-dimethoxy-2-(1,2,4-triazol-1-ylmethyl)quinoline-3-carboxylate (1d) and 10-(3,4-dimethoxyphenyl)-7,8-dimethoxy-2H-pyridazino[4,5-b]quinolin-1-one (1e), metabolites of TAK-603 (1), have been achieved. Use of the methanesulfonyl as a protective group of the phenolic hydroxy for Friedel-Crafts reaction enabled a new simpler synthetic route of 1d in high yield. Chloromethyl derivative (23) was converted to formyl derivative (32) using the Kröhnke reaction, followed by cyclization with hydrazine, which formed a novel compound 1e.     

A novel oxidative decarboxylation—synthesis of 2-amino-1,2-dihydroisoquinoline-3(4H)-one and its amide derivatives from tetrahydroisoquinoline-3-carboxylic acid

A convenient method of synthesizing 2-amino-1,2-dihydroisoquinoline-3(4H)-one and its amide derivatives (4 or 5) is described through sydnone intermediate (3) derived from TIC (1) (tetrahydroisoquinoline-3-carboxylic acid) under acidic conditions in good yield.     

Synthesis of (S,Z)-3-[(1H-indol-3-yl)methylidene]hexahydropyrrolo[1,2-a]pyrazin-4(1H)-one: an alternative, enaminone based, route to unsaturated cyclodipeptides

A series of racemic and enantiopure (S,Z)-3-[(1H-indol-3-yl)methylidene]hexahydropyrrolo[1,2-a]pyrazin-4(1H)-one (cyclic Pro-ΔTrp) dipeptide analogues were prepared. Racemic analogues 6a-c were prepared by direct coupling of racemic cyclodipeptide enaminone (R,S)-5 with various indole derivatives. On the other hand, enantiopure analogues were prepared through a copper(I) catalyzed vinyl amidation reaction in which acyclic (S)-Pro-ΔTrp dipeptide analogues 20 and 21 were formed. Acyclic dipeptides were cyclized to enantiopure (S)-Pro-ΔTrp dipeptide analogues 24 and 25. For coupling reactions, vinyl bromides were prepared in several steps. From ethyl acetate (7), enaminone 8 was prepared and coupled with 2-methylindole and 2-phenylindole to give 9 and 10. Direct bromination of 3-(indole-3-yl)propenoates 9 and 10 at position 2 results in vinyl bromides 11 and 12. The Boc protecting group on the indole nitrogen 1′ in vinyl bromides 11 and 12 was introduced, before the copper(I) catalyzed coupling with N-Boc prolinamide 18 was performed. Enantiomeric purity of chiral intermediates and final products was determined mostly by HPLC or ¹H NMR spectroscopy and X-ray diffraction.     

Rearrangement during halogenation of 2-hydroxy-1,2-diphenylpropan-1-one (α-methylbenzoin)

The reaction of 2-hydroxy-1,2-diphenylpropan-1-one 1 with SOCl₂ or PBr₃ gives, respectively, the 3-chloro- and 3-bromo-1,2-diphenylpropan-1-ones 4 and 6. The expected 2-chloro- and 2-bromo-1,2-diphenylpropan-1-ones 2 and 5 can, however, be formed by treatment of 1,2-diphenylpropan-1-one 8 with Cl₂ or Br₂/AlCl₃. The four halogenated products are characterised by ¹H and ¹³C NMR spectroscopy for the first time.     

Synthesis of 2,3-dihydroimidazo[1,2-a]pyrimidin-5(1H)-ones by the domino Michael addition retro-ene reaction of 2-alkoxyiminoimidazolidines and acetylene carboxylates

2-Alkoxyiminoimidazolidines 2-3 react with acetylene dicarboxylates and ethyl phenylpropiolate to give 8-alkoxy-imidazo[1,2-a]pyrimidin-5(3H)-ones C, which subsequently undergo a sterically induced multihetero-retro-ene fragmentation to give imidazo[1,2-a]pyrimidin-5(1H)-ones 4-7 together with formaldehyde or benzaldehyde. On the other hand, a similar reaction of 2-3 with ethyl propiolate gives corresponding 8-alkoxy-imidazo[1,2-a]pyrimidin-5(3H)-ones 8-10. The unsubstituted imidazo[1,2-a]pyrimidin-5(1H)-one 11 can be prepared by retro-ene reaction of 9 upon prolonged heating in refluxing ethanol. A direct synthetic approach to 1-formyl-7-phenyl-imidazo[1,2-a]pyrimidine-5(1H)-one 14 is reported using DMF/sulfonyl chloride as a new Vilsmeier-type N-formylating reagent.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

An efficient method for the synthesis of 1-chlorophenazines based on the selective cathodic reduction of 3,3,6,6-tetrachloro-1,2-cyclohexanedione

An efficient method for the synthesis of 1-chlorophenazines has been established. It is based on the use of 3,6,6-trichloro-2-hydroxy-2-cyclohexen-1-one 4 as a synthetic equivalent of 3-chloro-1,2-benzoquinone 3. The intermediate 4 was prepared in near quantitative yield by electroreductive monodechlorination of 3,3,6,6-tetrachloro-1,2-cyclohexanedione 1, which is an inexpensive and easily available starting material. Efficient reactions of 4 with primary 1,2-phenylenediamines provided the corresponding 1,1,4-trichloro-1,2,3,4-tetrahydrophenazines 6, which were directly aromatized by treatment with 2,6-lutidine to give the title compounds in high yields. X-ray crystallographic structures for 1,1,4-trichloro-1,2,3,4-tetrahydro-6-methylphenazine 6f, 8-benzoyl-1,1,4-trichloro-1,2,3,4-tetrahydro-phenazine 6ea, and 1,7-dichlorophenazine 10db have been determined.     

The first synthesis and X-ray structures of polyfluorinated 1,2-, 2,3- and 2,4a-dihydro-1,3-diazafluorenes

Acetic acid-catalyzed condensation of 2-amino-3-(1-imino-2,2,2-trifluoroethyl)-1,1,4,5,6,7-hexafluoroindene (1b) with acetone and cyclopentanone gives 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene (2a) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3a) together with small amounts of 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene (2b) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3b), respectively. When acted upon by (CH₃)₂SO₄ compounds 2, 3 were converted into corresponding fluorine-containing 1-methyl-1,2-dihydro-1,3-diazafluorenes 6, 7. 4a-Chloro-5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,4a-dihydro-1,3-diazafluorene (8) has been synthesized by the interaction of compound 2 with SOCl₂. Solution of compound 2 as well as 8 in CF₃SO₃H-CD₂Cl₂ generated 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2,3,4-tetrahydro-1,3-diazafluorene-4-yl cation (2c). The structures of compounds 2, 3, 6-8 have been determined by single crystal X-ray diffraction.     

A convenient one-pot synthesis of 2-(trifluoromethyl)-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one derivatives and their further transformations

The trifluoromethyl containing heterocycles, 2-hydroxy-4-aryl-3-(thien-2-oyl)-2-(trifluoromethyl)-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one derivatives 4, were synthesized via a one-pot three-component reaction of aldehyde 1 with 1,3-cyclohexanedione 2 and 4,4,4-trifluoro-1-(thien-2-yl)butane-1,3-dione 3 in the presence of a catalytic amount of Et₃N. The effect of bases and solvents on the reaction efficiency and yield was briefly investigated. Treatment of 4 with an excess amount of NH₄OAc in ethanol afforded 2-trifluoromethyl-1H-quinolin-5-one derivatives 5. Refluxing of 4 with TsOH in CHCl₃ gave the corresponding dehydrated products 8.     

Specific features of the reactions of quinazoline and its 4-hydroxy and 4-chloro substituted derivatives with C-nucleophiles

Reactions of quinazoline 1 with indole, pyrogallol and 1-phenyl-3-methylpyrazol-5-one in the presence of acid led to C-4 adducts 2, 3 and 5. Adduct 4 is formed by heating 1 with 1,3-dimethylbarbituric acid without acid catalysis. 1-Phenyl-3-methylpyrazol-5-one reacts with 1 without acid catalysis to form dipyrazolylmethane 6. 4-Chloroquinazoline 8 reacts with 1-phenyl-3-methylpyrazol-5-one to form 4-(1-phenyl-3-methyl-5-oxopyrazol-4-yl) quinazoline 9 and dipyrazolylmethane 6. Heating 8 with 2-methylindole leads to the formation of 4-(2-methylindol-3-yl) quinazoline 10 and tris(2-methylindol-3-yl)methane 11.     

Reactions of (1R,2S)-1,2-di(2-furyl)-1,2-di(3-guaiazulenyl)ethane and (1R,2S)-1,2-di(3-guaiazulenyl)-1,2-di(2-thienyl)ethane with tetracyanoethylene (TCNE) in benzene: comparative studies on the products and their spectroscopic properties

Reactions of the title meso forms, (1R,2S)-1,2-di(2-furyl)-1,2-di(3-guaiazulenyl)ethane (1) and (1R,2S)-1,2-di(3-guaiazulenyl)-1,2-di(2-thienyl)ethane (2), with a two molar amount of TCNE in benzene at 25 °C for 5 h (for 1) and 48 h (for 2) under oxygen give new compounds, 2,2,3,3-tetracyano-4-(2-furyl)-8-isopropyl-6-methyl-1,4-dihydrocyclohepta[c,d]azulene (3) and 2,2,3,3-tetracyano-8-isopropyl-6-methyl-4-(2-thienyl)-1,4-dihydrocyclohepta[c,d]azulene (4), respectively, in 74 and 21% isolated yields. Comparative studies on the above reactions as well as the spectroscopic properties of the unique products 3 and 4, possessing interesting molecular structures, are reported and, further, a plausible reaction pathway for the formation of these products is described.     

Synthesis and conformational analysis of 3-hydroxypipecolic acid analogs via CSI-mediated stereoselective amination

A short and efficient stereoselective synthetic approach toward substituted piperidines, involving (2S,3S)-3-hydroxypipecolic acid 1, (2R,3S)-3-hydroxypipecolic acid 3, and their acid-reduced analogs 2 and 4, has been developed. The requisite anti- and syn-1,2-amino alcohols 11 and 12 for the preparation of title four piperidine analogs 1-4 were synthesized via the regioselective and diastereoselective amination of anti- and syn-1,2-dibenzyl ethers 13 and 14 using chlorosulfonyl isocyanate (CSI). As a result, reaction of anti-1,2-dibenzyl ether 13 with CSI afforded exclusively the anti-1,2-amino alcohol 11 with the diastereoselectivity of 49:1 in toluene at −78 °C and syn-isomer 14 gave the syn-1,2-amino alcohol 12 as the major product with the diastereoselectivity of 12:1 in hexane at −78 °C. The result of these reactions could be explained by the neighboring group effect leading to retention of stereochemistry. In addition, conformational changes of trans-piperidine intermediate 9 in terms of the nature of N-protecting groups are described. The conformations of 9 and 24-28 were confirmed by ¹H NMR analysis and NOE correlation. Furthermore, the conformations of piperidines 18 and 23 with hydroxyl methyl substituent at C-2 were investigated by NMR spectroscopy.     

Stereochemical studies—XIII: Cyclic aminoalcohols and related compounds—VI synthesis of the four 2-amino-4-t-butylcyclopentanol isomers

From diethyl 3-t-butyladipate (5), via cis- and trans-4-t-butylcyclopentene-1,2-oxide (31, 32) as key compounds, the syntheses of cis-2-amino-cis-4-t-butylcyclopentanol (1), cis-2-amino-trans-4-t-butylcyclopentanol (2), trans-2-amino-cis-4-t-butylcyclopentanol (3) and trans-2-amino-trans-4-t-butylcyclopentanol (4) have been achieved. 1, 3 and 4 were also synthesized from the corresponding 2-hydroxy-4-t-butylcarboxylic acids by Curtius degradation of the hydrazides (11, 18, 19). The steric course of process leading to the above compounds is discussed.     

A simple synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles

A simple four-step synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8 (or their 1H-pyrazol-3(2H)-one tautomers 8′) as the pyrazole analogues of histamine was developed. First, enamino lactam 3 was prepared as the key intermediate in two steps from 2-pyrrolidinone (1). Next, acid-catalysed ‘ring switching’ transformations of 3 with monosubstituted hydrazines 4 gave N-[(1-substituted 5-hydroxy-1H-pyrazol-4-yl)ethyl]benzamides 7a-k and N-[2-(2-heteroaryl-3-oxo-2,3-dihydro-1H-pyrazol-4-yl)ethyl]benzamides 7′l-o. Benzamides 7a-k and 7′l-o were finally hydrolysed by heating in 6 M hydrochloric acid to furnish 1-substituted 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8a-k and 4-(2-aminoethyl)-2-heteroaryl-1H-pyrazol-3(2H)-ones 8′l-o in good overall yields.