Catalytic kinetic spectrophotometric determination of trace amounts of palladium with dahlia violet after separation and preconcentration on sulphydryl dextran gel

A sensitive and selective kinetic catalytic spectrophotometric method has been described for the determination of trace amounts of palladium(II). The method is based on the catalytic effects of palladium(II) on the reduction reactions of Dahlia Violet with sodium dihydrogen hypophosphite (NaH₂PO₂) in a sulfuric acid medium. Under optimal conditions, trace amounts of palladium(II) can be determined. A good linear range has been obtained in the concentration range of Pd(II) over 0.001–0.028 μg/mL with a detection limit of 5.9 × 10⁻¹⁰ g/mL. The method has been successfully applied to the determination of palladium(II) in ore and soil samples. The relative standard deviation was less than 5.0% (n = 11). The coexisting ions were eliminated by preconcentration and separation on sulphydryl dextran gel with satisfactory results. The text was submitted by the authors in English.     

甲基紫动力学催化光度法测定火腿肠中痕量亚硝酸根

基于在稀H3PO4介质中,亚硝酸根对KBrO3氧化甲基紫的褪色反应具有催化作用,建立了一种测定痕量亚硝酸根的催化光度法。该方法在室温下进行,操作方便,大多数离子不干扰。在选择的实验条件下,检出限为2 89×10-3μg/mL,线性范围为0.003～0.28μg/mL,可用于火腿肠样品中亚硝酸根的测定。     

催化光度法测定粮食中的痕量锰

研究了测定痕量锰的新催化光度法,方法基于氨三乙酸为活化剂,锰（Ⅱ）催化高碘酸钾氧化溴酚蓝的反应。测定锰的线性范围为0．4－10ng/mL,检出限为0．082ng/mL,对于4.0ng/mL Mn(Ⅱ）的测定,相对标准偏差为3．4％（n=9),其方法已用于粮食中锰的测定。     

KBrO3氧化甲基紫褪色动力学光度法测定食品中痕量钒

基于0.004 mol/L的柠檬酸介质中,痕量V(Ⅴ)催化KBrO3氧化甲基紫的褪色反应,建立了测定痕量V(Ⅴ)的动力学光度法。方法的检出限为1.23μg/L,线性范围为0～0.16μg/mL。讨论了酸度、反应物浓度、温度、反应时间、干扰离子等因素的影响,确定了该体系反应的最佳条件。在25 mL溶液中,测定2.0μg V(Ⅴ)的RSD为1.9%(n=11)。方法可用于测定小麦和苹果中的痕量V(Ⅴ),RSD为1.1%～2.7%,标准加入回收率为97.6%～99.0%。     

Kinetic, spectrophotometric determination of nanogram levels of manganese(II) using catalytic azo dye—potassium periodate—1,10-phenanthroline system

The catalytic effect of manganese(II) on the oxidation of the dye, sodium salt of 4-(2-hydroxynaphth-1-ylazo)benzenesulfonic acid, with potassium periodate in the presence of 1,10-phenanthroline in weakly acidic media was studied. The reaction was followed spectrophotometrically by measuring the decrease in the absorbance of the dye at λ = 483 nm. Under the optimum conditions Mn(II) concentration within the range of 0.08–4 ng cm⁻³ could be determined by the fixed-time method with a detection limit of 0.025 ng cm⁻³. The method was applied for the determination of manganese content in tomatoes, aubergine, white radish, and French beans. The results showed a good agreement with those obtained by atomic absorption spectrophotometry.     

KClO3-甲基紫催化光度法测定痕量溴的研究

在稀H2SO4介质中,以抗坏血酸为活化剂,痕量溴可强烈催化KClO3氧化甲基紫的反应,研究了反应的最佳条件及动力学参数,建立了测定痕量溴的新方法.方法的线性范围为0.0012～0.18 μg/mL,检出限为8.92×10-10g/mL.方法可用于大米、小麦及海带样品中痕量溴的测定.     

过氧化氢氧化桑色素动力学荧光法测定痕量钴(Ⅱ)

建立了以Co(Ⅱ)为催化剂,催化过氧化氢氧化桑色素,使其荧光减弱的催化动力学荧光法。在pH 10.70的Na2B4O7?10H2O - NaOH缓冲溶液中,痕量钴(Ⅱ)离子对0.24%的H2O2溶液氧化 4.0×10-7 mol/L的桑色素溶液有明显的催化作用。在最大波长处( λex/λem = 416.5 nm / 556.4 nm),体系的荧光强度在一定的浓度范围内与Co(Ⅱ)的浓度呈线性相关,线性范围为0.8～8.0 μg/L,检出限为0.14 μg/L。优化了体系的最佳条件,考察了体系的离子干扰情况,对灰钙土和分子筛样品进行了分析检测,回收率分别为95.0～110.0%和98.9%～101.9%。     

Kinetic spectrophotometric method for gold(III) determination

The kinetic spectrophotometric method for Au(III) determination was developed and validated. It was based on the catalytic effect of gold on the oxidation of methylene blue B (3,7di-(dimethyl amino)-10-dehydro-phenotiazin chloride) by ammonium peroxo-disulfate in citric buffer solution. There was the linearity of the calibration curve in the concentration range from 0.09 to 2.90 μg ml⁻¹ Au(III). The relative standard deviation was 2.50% and correlation coefficient of 0.9999. The limit of detection was determined as signal to noise ratio (3:1) and it was 5.5 ng ml⁻¹. The limit of quantification, based on signal to noise ratio 10:1 was 19.25 ng ml⁻¹. The selectivity was tested on the basis of influence of known amounts of different ions in the reaction mixture, upon the reaction rate. Kinetic and thermodynamic parameters were reported for both catalytic and non-catalytic reactions. The method was verified by Au(III) determination in anti-rheumatic drug “Tauredon” and in human urine samples, using ICP-AES as the comparative method. As the method is accurate, reliable, quick and simple it could be useful for clinical and toxicological practice.     

Simultaneous kinetic spectrophotometric determination of Cu(II), Co(II) and Ni(II) using partial least squares (PLS) regression

A partial least squares (PLS-1) calibration model based on kinetic—spectrophotometric measurement, for the simultaneous determination of Cu(II), Ni(II) and Co(II) ions is described. The method was based on the difference in the rate of the reaction between Co(II), Ni(II) and Cu(II) ions with 1-(2-pyridylazo)2-naphthol in a pH 5.8 buffer solution and in micellar media at 25°C. The absorption kinetic profiles of the solutions were monitored by measuring the absorbance at 570 nm at 2 s intervals during the time range of 0–10 min after initiation of the reaction. The experimental calibration matrix for the partial least squares (PLS-1) model was designed with 30 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.1-2 μg mL⁻¹ for each cation. The proposed method was successfully applied to the simultaneous determination of Cu(II), Ni(II) and Co(II) ions in water and in synthetic alloy samples.      

氯酸钾体系催化动力学光度法测定痕量钒(Ⅱ)

研究了在0.1 mol/L H3PO4介质中,活化剂抗坏血酸的作用下,V(Ⅴ)催化KClO3氧化甲基红褪色的指示反应,由此建立了一种测定痕量V(Ⅱ)的催化动力学光度新方法。研究了影响该催化褪色反应的因素。方法的线性范围为0.09～7.0 ng/mL,检出限为2.9×10-2 ng/mL。方法用于实际样品的测定。     

微乳液增敏测定药物中微量铋

研究了多种胶束及微乳液对水杨基荧光酮光度法测定铋的增敏作用,并选择增敏作用最强的微乳液作为铋测定的增敏试剂,确定最佳条件。结果表明,在微乳液(OP 正丁醇正庚烷水)存在下,铋与水杨基荧光酮在H2SO4介质中可以形成紫红色配合物,配合物的最大吸收峰位于516nm波长处,表观摩尔吸光系数为ε=1.17×105L·mol-1·cm-1。铋量在0～1 2μg mL范围内符合比尔定律。本法可用于胃药中铋的测定。     

Kinetic spectrophotometric determination of tetraphenylporphinecobalt(II) based on photochromism of immobilized norbornadiene

The cobalt(II) complex is detected spectrophotometrically by its catalysis of a photochromic isomerism of norbornadiene (NBD). NBD is immobilized on porous glass beads, and is isomerized to quadricyclane (QC) by UV irradiation. The beads are then immersed in a solution containing tetraphenylporphinecobalt(II) [TPPCo(II)], and the QC is converted back to NBD by a catalytic reaction with TPPCo(II). The rate constant, measured spectrophotometrically, is proportional to the concentration of TPPCo(II). The detection limit of TPPCo(II) is 60 μM for a reaction period of 1 h. This spectrophotometric detection can be applied repetitively without any supply of the chemical reagent, as NBD immobilized on the porous glass beads can be re-isomerized to QC by UV irradiation.     

Hydrothermal synthesis,crystal structure and antibacterial studies of nickel(II) and manganese(II) complexes with ciprofloxacin

Hydrothermal treatments of ciprofloxacin with Ni(NO₃)₂·6H₂O and Mn(ClO₄)₂·6H₂O yield two metal complexes: [Ni(H-cip)₂(H₂O)₂](NO₃)₂·2H₂O (1) and [Mn(H-cip)₂(H₂O)₂] (ClO₄)₂·2H₂O (2), confirmed by elemental analysis, IR and single crystal X-ray diffraction analyses. Complexes 1 and 2 were screened for antibacterial activity against Staphylococcus aureas, E. coli, Pseudomonas aeruginos and Candidaalbicans.     

桑色素褪色光度法测定茶叶中的锰

锰是人体必需的微量元素,具有重要的生理功能和营养作用.茶树对锰有富集现象,茶叶是人们常用的饮料[1].因此,建立一种灵敏而又简便的测定痕量锰的分析方法,具有重要的实用价值.     

催化动力学光度法测定水中痕量钒

基于在H3PO4介质中, 抗坏血酸作活化剂, 100 ℃沸水浴加热的条件下, 痕量钒V(Ⅴ)催化溴酸钾氧化三溴偶氮氯膦(TB-chorophosphonazo)的褪色反应, 建立了新的测定超痕量钒的催化光度法. 该方法对钒测定范围是0～1.0 ng/mL, 检出限为0.133 ng/mL. 实验考察了影响催化反应速率的各种因素, 确定了最佳的实验条件. 实验测定了反应的动力学参数: 表观活化能Ea'=93.80 kJ/mol, 表观速率常数为k'=1.307×10-3 s-1, 建立了催化反应动力学方程. 方法灵敏度高, 选择性好, 直接用于环境水体中痕量钒的测定.     

Sequential injection spectrophotometric determination of zinc(II) in pharmaceuticals based on zinc(II)–PAN in non-ionic surfactant medium

A sequential injection analysis (SIA) spectrophotometric method for the determination of trace amounts of zinc(II) with 1-(2-pyridylazo)-2-naphthol (PAN) is described. The method is based on the measurement of absorbance of the zinc(II)–PAN chelate solubilized with a non-ionic surfactant, Triton X-100, no extraction procedure is required in the proposed method, yielding a pink colored complex at pH 9.5 with absorption maximum at 553 nm. The SIA parameters that affect the signal response have been optimized in order to get the better sensitivity and minimum reagent consumption. A linear relationship between the relative peak height and concentration was obtained in the concentration range of 0.1–1.0 μg ml⁻¹. The limit of detection (LOD, defined as 3σ) and limit of quantification (LOQ, defined as 10σ) were 0.02 and 0.06 μg ml⁻¹, respectively. The sample throughput about 40 samples/h was obtained. The repeatability were 1.32 and 1.24% (n = 10) for 0.1 and 0.5 μg ml⁻¹, respectively. The proposed method was successfully applied to the assay of zinc(II) in three samples of multivitamin tablets. The results were found to be in good agreement with those obtained by flame atomic absorption spectrophotometric method and with the claimed values by the manufactures. The t-test showed no significant difference at 95% confidence level.     

Synthesis and crystal structure of aquachlorobis(1,10-phenanthroline)manganese(II) nitrobenzoate trihydrate

The title compound has been prepared and its crystal structure determined by X-ray diffraction methods. The complex salt consists of Mn(II) complex cations, benzoate anions and lattice water molecules. Mn(II) assumes a distorted octahedral geometry defined by two 1,10-phenanthroline (phen) ligands, a Cl^? ion and a water molecule. A comparison of bond distances and bond angles suggests electrostatic interaction between Mn(II) and coordinated N atoms. The nitrobenzoate anion does not coordinate to the Mn atom but links with the complex cation via O?H···O hydrogen bonds. Aromatic stacking occurs between phen rings and between phen and benzoate.     

Synthesis, crystal structure, spectroscopic and photoluminescence studies of manganese(II), cobalt(II), cadmium(II), zinc(II) and copper(II) complexes with a pyrazole derived Schiff base ligand

Varying coordination modes of the Schiff base ligand H₂L [5-methyl-1-H-pyrazole-3-carboxylic acid (1-pyridin-2-yl-ethylidene)-hydrazide] towards different metal centers are reported with the syntheses and characterization of four mononuclear Mn(II), Co(II), Cd(II) and Zn(II) complexes, [Mn(H₂L)(H₂O)₂](ClO₄)₂(MeOH) (1), [Co(H₂L)(NCS)₂] (2), [Cd(H₂L)(H₂O)₂](ClO₄)₂ (3) and [Zn(H₂L)(H₂O)₂](ClO₄)₂ (4), and a binuclear Cu(II) complex, [Cu₂(L)₂](ClO₄)₂ (5). In the complexes 1-4 the neutral ligand serves as a 3N,2O donor where the pyridine ring N, two azomethine N and two carbohydrazine oxygen atoms are coordinatively active, leaving the pyrazole-N atoms inactive. In the case of complex 5, each ligand molecule behaves as a 4N,O donor utilizing the pyridine N, one azomethine N, the nitrogen atom proximal to the azomethine of the remaining pendant arm and one pyrazole-N atom to one metal center and the carbohydrazide oxygen atom to the second metal center. The complexes 1-4 are pentagonal bipyramidal in geometry. In each case, the ligand molecule spans the equatorial plane while the apical positions are occupied by water molecules in 1, 3 and 4 and two N bonded thiocyanate ions in 2. In complex 5, the two Cu(II) centers have almost square pyramidal geometry (τ = 0.05 for Cu1 and 0.013 for Cu2). Four N atoms from a ligand molecule form the basal plane and the carbohydrazide oxygen atom of a second ligand molecule sits in the apex of the square pyramid. All the complexes have been X-ray crystallographically characterized. The Zn(II) and Cd(II) complexes show considerable fluorescence emission while the remaining complexes and the ligand molecule are fluorescent silent.