Novel catalytic hydrogenolysis of silyl enol ethers by the use of acidic ruthenium dihydrogen complexes

Treatment of 1-trimethylsilyloxy-1-cyclohexene (1a) in the presence of a catalytic amount of the acidic dihydrogen complex [RuCl(η²-H₂)(dppe)₂]OTf (4a) [dppe=1,2-bis(diphenylphosphino)ethane, OTf=OSO₂CF₃] (10 mol.%) under 1 atm of H₂ in anhydrous ClCD₂CD₂Cl at 50 °C for 8 h afforded cyclohexanone (3a) and Me₃SiH in quantitative NMR yields. Silyl enol ethers such as 1-triethylsilyloxy-1-cyclohexene (1b), 1-t-butyldimethylsilyloxy-1-cyclohexene (1c), and other trimethylsilylethers (1d, 1e, and 1f) reacted similarly with H₂ to afford the corresponding ketones and trialkylsilanes. The direct proton transfer from H₂ to the trimethylsilyl enol ethers (1a and 1d-1f) was confirmed by the experiments employing D₂ gas, where α-monodeuterated ketones (3a′ and 3d′-3f′) were obtained in high yields. The enantioselective protonation of prochiral silyl enol ethers with 1 atm of H₂ by employing [RuCl(η²-H₂)((S)-BINAP)₂]OTf (4e) [BINAP=2,2′-bis(diphenylphosphino)-1,1′-binaphthyl] and [RuCl(η²-H₂)((R, R)-CHIRAPHOS)₂]OTf (4f) [CHIRAPHOS=2,3-bis(diphenylphosphino)butane] showed that no enantioselectivity was observed in either catalytic or stoichiometric protonation reactions under various reaction conditions. The reaction of [RuHCl(dppe)₂] (5a) with one equivalent of Me₃SiOTf under 1 atm of H₂ produced rapidly 4a, concurrent with the formation of Me₃SiH. Based on these studies, the mechanism for this novel hydrogenolysis of silyl enol ethers is proposed which involves heterolytic cleavage of the coordinated H₂ on the ruthenium atom caused by the nucleophilic attack of the oxygen atom of enol ethers to give ketones and Me₃SiOTf, and the subsequent reaction of the resultant complex 5a with Me₃SiOTf under 1 atm of H₂ to regenerate the original dihydrogen complex 4a. On the other hand, the stoichiometric reaction of a lithium enolate 6e with one equivalent of 4e at −78 °C in CH₂Cl₂ under 1 atm of H₂ afforded 2-methyl-1-tetralone (3e) with 75% ee (S) in >95% yield, together with the formation of [RuHCl((S)-BINAP)₂] (5e).     

Application of the Gould-Jacobs reaction to 4-amino-2,1,3-benzoselenadiazole

An effective method for the synthesis of 4-amino-2,1,3-benzoselenadiazole (4) has been described. Reduction of readily available 4-nitrobenzothiadiazole 6 with SnCl₂·2H₂O afforded 1,2,3-triaminobenzene dihydrochloride 2. The latter upon treatment with aqueous SeO₂ solution provided desired amine 4. Nucleophilic vinylic substitution of activated enol ethers 7 with amine 4 led to (benzoselenadiazol-4-ylamino)methylene derivatives 8. Thermal cyclization of derivatives 8a-c, e, f under Gould-Jacobs reaction conditions gave angularly annelated 7-(non)substituted selenadiazolo[3,4-h]quinolones 9. Acid hydrolysis of etyl ester 9c afforded corresponding acid 10. All prepared selenadiazoloquinolones were tested for antimicrobial activity.     

Synthesis and dynamics of atropisomeric (S)-N-(α-phenylethyl)benzamides

The synthesis of atropisomeric 2-substituted benzamides 2a-e, 3a-e, and 4a-e, and characterization by X-ray structure analysis of 2d, 2e, 3c, 3e, 4c, and 4e are reported. Dynamic ¹H NMR spectroscopic studies of benzamides 2b-d, 3b-d, and 4b-d indicate that only two of the four possible rotamers are present in solution, with population ratios ranging between 1.5:1 and 4.1:1. The measured free energy of activation to interconversion of the rotamers ranged from 12.4 to 18.9 kcal mol⁻¹. Benzamides ArCON[(S)-phenethyl]₂ (2e, 3e, and 4e), exhibited atropisomer ratios between 1.7:1 and 1:1, and free energies of interconversion of the rotamers ranged from 11.5 to 17.6 kcal mol⁻¹. The highest rotation barriers were observed for the ortho-nitro derivatives 2a-e. Molecular calculations at the semiempirical level (PM3MM) gave free energies of activation for benzamides 2e and 3e of 23.6 and 12.4 kcal mol⁻¹, respectively, which are comparable to the experimental values.     

Synthesis and antibacterial activity of chalcones bearing prenyl or geranyl groups from Angelica keiskei

Chalcones bearing prenyl or geranyl groups from Angelica keiskei, such as 4-hydroxyderricin (1a), xanthoangelol (1e), xanthoangelol F (1f), xanthoangelol H (2), deoxyxanthoangelol H (3), and deoxydihydroxanthoangelol H (4) and their derivatives were synthesized. From the evaluation of antibacterial activity of the synthesized chalcones, 1a, isobavachalcone (1b), 1e, 1f, bavachalcone (5a), and broussochalcone B (5b) were found to inhibit Gram-positive bacteria.     

Dihydrofurocoumarin and dihydrofurodihydropyrid-2-one derivatives via palladium catalysed cascades involving aryl/heteroaryl/vinyl iodides and allene followed by acid catalysed cyclisation

Mono 3-(2′-arylallyl) derivatives of 4-hydroxycoumarin 1a,b, 4-hydroxy-6-methyl-pyran-2-one (3) and 6-hydroxy-1,4-dimethyl-1,2-dihydropyrid-2-one-3-carbonitrile (4) are produced in 3-component cascades involving aryl/heteroaryl/vinyl iodides and allene (1 atm) using Pd(PPh₃)₄/Cs₂CO₃/MeCN/80 °C or Pd₂(dba)₃/tris(2-furyl)phosphine/K₂CO₃/DMF/80 °C as the catalyst system. 4-Hydroxy-2-quinolone (2) afforded a mixture of mono- and bis-allylation products under these conditions. Mono C-allylation products 5a-e and 15a-e undergo facile acid catalysed cyclisation to afford dihydrofurocoumarins 11a-e and dihydrofurodihydropyrid-2-ones 16a-e in good overall yield.     

Imino Diels-Alder reaction of boronates. Preparation and characterization of new 3,4-dihydroquinoline and 1,2,3,6-tetrahydropyridine derivatives

The preparation of 3,4-dihydroquinolines (2a-d and 3a,b,d), as well as 1,2,3,6-tetrahydropyridines (4a-e) by imino Diels-Alder reaction of boronates (1a-e) with 2,3-dimethylbutadiene is reported. Boronates (1a-d) containing substituents meta and para relative to the imino fragment lead to diastereomeric mixtures of 4-methyl-4-ethenyl-3,4-dihydroquinolines (2, 3) and tetrahydropyridines (4). In contrast, the presence of an electron withdrawing substituent at the para position (1e), favors the iminodienophile behavior giving 4,5-dimethyl-1,2,3,6-tetrahydropyridine (4e) as the main product. The results show that boronates derived from Schiff bases are electron deficient species which can act either as dienophiles or dienes in the reaction with 2,3-dimethylbutadiene to give 3,4-dihydroquinolines and 1,2,3,6-tetrahydropyridines. All products were characterized by NMR and X-ray diffraction analysis of 2b, 2d, 3d and 4c allowed to assign the relative configuration of the newly formed stereogenic centers.     

Steric course of some cyclopropanation reactions of L-threo-hex-4-enopyranosides

Completely protected 4-deoxy-α-L-threo-hex-4-enopyranosides 1c,d undergo the dichlorocarbene addition affording exclusively diastereomeric adducts 5c,d with the cyclopropane ring anti to the C-3 alkyloxy substituent, while the reaction with 3-unprotected derivatives 1a,b affords a mixture of syn and anti derivatives. Under the Simmons-Smith cyclopropanation adducts 2a-d with a syn stereochemistry are obtained. Starting from 5b, the cyclopropanated sugar 3b is obtained by reduction with LiAlH₄, thus the two diastereomers 2b and 3b can be stereoselectively obtained through the two different pathways. For a useful comparison, 4-deoxy-β-L-threo-hex-4-enopyranoside 1e was also subjected to the above two cyclopropanation methods affording the expected cycloadduct 2e and a diastereomeric mixture of dichlorocycloadducts 4e and 5e (4e/5e=2.8:1).     

A NMR, X-ray, and DFT combined study on the regio-chemistry of nucleophilic addition to platinum(II) coordinated terminal olefins

The series of platinum complexes [PtCl(η²-CH₂CH-C₆H₄-X)(tmeda)](ClO₄) (X = H, 1b; 4-OMe, 1c; 3-OMe, 1d; 4-CF₃, 1e; 3-CF₃, 1f; 3-NO₂, 1g; tmeda = N,N,N′,N′-tetramethyl-1,2-ethanediamine) has been considered. In the styrene complex (1b) both solution (NMR) and solid state (X-ray) data indicate a significant difference in the Pt-C bond lengths (the longer bond being that involving the olefin carbon atom carrying the phenyl ring). Such a difference increases when X is an electron donor group (EDG, 1c) and decreases when X is an electron withdrawing group (EWG, 1d-g). The attack of a nucleophile (MeO⁻) to the substituted carbon (Markovnikov type, M) is by far the most favoured in the case of unsubstituted (1b) or EDG-substituted (1c) styrenes. The presence of an EWG (compounds 1d-g) levels off the probability of M and anti-M type of attack. DFT calculations on 1b,c and 1e were also performed. The NLMO analysis reveals the crucial role of the interaction between the filled π orbital of the olefin and the empty d orbital of platinum; the carbon with greater electron density becoming less susceptible of nucleophilic attack.     

Ferrocenoyl peptides with sulfur-containing side chains: synthesis, solid state and solution structures

The synthesis and full characterization of a number of amino acid and dipeptide derivatives with sulfur-containing side chains derived from ferrocene carboxylic acid and ferrocene-1,1′-dicarboxylic acid is presented. In particular, compounds Fc-CO-(Aaa)_n-OMe (4) and Fe[C₅H₄-CO-(Aaa)_n-OMe]₂ (3) with (Aaa)_n = Cys(Bzl) (a), Cys(Bzl)-Cys(Bzl) (b), Cys(p-OMe-Bzl) (c), Cys(p-OMe-Bzl)-Cys(p-OMe-Bzl) (d), Met (e), and Met-Met (f) were prepared. Also, the free acid derivatives Fe[C₅H₄-CO-Met-OH]₂ (6e) and Fc-CO-Met-OH (7e) were prepared and characterized. The solid state structures of 3a, 4b, and 4e were determined by single crystal X-ray diffraction. Compound 3a shows a 1,3′ substitution pattern on the Cp rings in the solid state. Structures in solution were determined by NMR, IR and CD spectroscopy, with particular emphasis on the question of hydrogen bonding and helical chirality of the metallocene. As an example, the full assignment for the Cp signals in the disubstituted derivative 3a was achieved by simulation of the ¹H NMR signals from the cyclopentadienyl ring in combination with 2D-NOESY spectra. In solution, 3a has the known 1,2′ substitution pattern, which is stabilized by intramolecular hydrogen bonds.     

Sodium dithionite initiated reactions of 1-bromo-1-chloro-2,2,2-trifluoroethane with enol ethers of cyclic ketones

Sodium dithionite initiated reactions of 1-bromo-1-chloro-2,2,2-trifluoroethane (1) with methyl and trimethylsilyl ethers of cyclopentanone and cyclohexanone enols (2a-d) in a MeCN/H₂O system were investigated. 2-(2,2,2-Trifluoroethylidene)cyclopentanone (4a) and 2-(2,2,2-trifluoroethylidene)-cyclohexanone (4b), respectively, were obtained as the main products and isolated in reasonable yields. The reaction with a 1:1 mixture of 5- and 3-methyl substituted 1-methoxycyclohexenes, 2e and 2f, revealed strong influence of steric hindrance on the reaction rate; a mixture of 2-(2,2,2-trifluoroethylidene)-5-methylcyclohexanone (6) and 2-(2,2,2-trifluoroethylidene)-3-methylcyclohexanone (7) in a 9:1 ratio was formed. Ketones 4a and 4b were reduced to the corresponding alcohols 8 and 9 and the reaction of 4b with hydrazine gave an indazole derivative 10.     

A highly α-regioselective In(OTf)3-catalyzed N-nucleophilic substitution of cyclic Baylis-Hillman adducts with aromatic amines

The highly α-regioselective N-nucleophilic substitution of B-H adducts bearing five (1a-f) or six-membered ring (5a-e) moieties with aromatic amines (2a-e) was developed under the catalysis of In(OTf)₃ (10 mol%). During the reaction the allylic rearrangement from γ-product to α-product occurred, resulting in thermodynamically stable α-product predominately.     

Electrochemical synthesis of 1,3,4-thiadiazol-2-ylthio-substituted catechols in aqueous medium

Anodic oxidation of catechols 1a-e in the presence of 5-methyl-2-mercapto-1,3,4-thiadiazole 2 has been studied in acetate buffer solution by cyclic voltammetry and controlled-potential electrolysis techniques. The effects of various electrolytic conditions (amount of passed charge, anodic materials, pH of the electrolytic solution, applied potential, and concentration of substrates) on the yield have also been investigated. The results showed that the position of the initial substituent of the starting catechol derivatives dominated the formation of monothiadiazol-2-ylthio-substituted or/and dithiadiazol-2-ylthio-substituted products. For 4-substituted catechols 1a-b, monothiadiazol-2-ylthio-substituted products (3a-b) were exclusively produced in high to excellent yields. However, in the cases of catechol itself (1c) and 3-substituted catechols (1d-e), both monothiadiazol-2-yl-substituted (3c-e and 5d-e) and dithiadiazol-2-ylthio-substituted products (4c-e) were isolated. In addition, the nature of the initial substituent of the starting 3-substituted catechols (1d and 1e) affected the relative ratio of the two monothiadiazol-2-ylthio-substituted isomers (3d-e vs 5d-e).     

Regioselective synthesis of 1- and 4-substituted 7-oxopyrazolo[1,5-a]pyrimidine-3-carboxamides

The synthesis of 7-substituted pyrazolo[1,5-a]pyrimidine-3-carboxamides was studied. First, methyl 7-hydroxypyrazolo[1,5-a]pyrimidine-3-carboxylate (5) was prepared in three steps from methyl 5-amino-1H-pyrazole-4-carboxylate (3). Treatment of 5 with POCl₃ gave the highly reactive 7-chloro derivative 10, which was reacted with amines, benzyl alcohol, and phenylboronic acid in the presence of Pd-catalyst to give the corresponding 7-substituted derivatives 11. Hydrolysis of the esters 5 and 11 followed by amidation gave the corresponding carboxamides 16a–h and 15. Regioselectivity of N-alkylation of 7-hydroxypyrazolo[1,5-a]pyrimidine-3-carboxylic acid derivatives 5 and 16 was tunable by the carboxy function. Alkylation of the secondary amides 16a–f furnished the 1-alkyl derivatives 17a–f, whereas the ester 5 and the tertiary amides 16g,h gave the 4-alkyl derivatives 14a–d and 16m,n, selectively.     

Reactions of 4-substituted 5H-1,2,3-dithiazoles with primary and secondary amines: fast and convenient synthesis of 1,2,5-thiadiazoles, 2-iminothioacetamides and 2-oxoacetamides

The treatment of 5H-1,2,3-dithiazole-5-thiones 1 in chloroform under reflux and 5H-1,2,3-dithiazol-5-ones 2 in THF at room temperature with primary aliphatic amines and benzylamine afforded 1,2,5-thiadiazole-3(2H)-thiones 3 and 1,2,5-thiadiazol-3(2H)-ones 6, respectively. The structure of dithiazolone 3f was confirmed by X-ray diffraction analysis. The reaction of dithiazolone 2e bearing an electron-donating methyl group in the 4-position gave 2-oxoacetamide 7e in high yield. The reaction of thiones 1 with secondary aliphatic amines in DMSO yielded 2-iminothioacetamides 8 in moderate yields together with elemental sulfur. Interestingly, the treatment of dithiazolones 2 with secondary amines under the same conditions afforded 2-oxoacetamides 9—the products of the hydrolysis of corresponding imino derivatives 10, which was isolated as 10b. A general mechanism was proposed for the formation of the products.     

Microwave-assisted and conventional synthesis and stereogenic properties of monospirocyclotriphosphazene derivatives

The reactions of hexachlorocyclotriphosphazene, N₃P₃Cl₆, with N/O donor type N-alkyl or (aryl)-o-hydroxybenzylamines HO(C₆H₄)CH₂NHR(Ar), [R(Ar) = C(CH₃)₃ (1), Ph (2)] produce monospirocyclic tetrachlorocyclotriphosphazenes (1a and 2a). The geminal substituted cyclotriphosphazenes (1b, 1d, 2b and 2d) are obtained from the reactions of 1 equiv. of 1a and 2a with 2 equiv. of pyrrolidine or morpholine in THF, while the fully substituted phosphazenes (1c, 1e, 2c and 2e) are formed from the reactions of 1a and 2a with the excess pyrrolidine or morpholine in toluene, between 24 and 48 h. The microwave-assisted reactions of 1a and 2a with excess pyrrolidine or morpholine in toluene afford the fully substituted products with higher yields than those which were obtained by conventional methods. The structural investigations of the compounds have been verified by elemental analyses, ESI-MS, FTIR, ¹H, ¹³C, ³¹P NMR and HETCOR techniques. The crystal structure of 2a is determined by X-ray crystallography and the phosphazene ring is in the flattened boat form. Compounds 1b, 1d, 2b and 2d in which the spiro aryloxy moiety provides the one centre of chirality exist as racemates and the chirality has been confirmed by ³¹P NMR spectroscopy on addition of a chiral solvating agent (CSA), (S)-(+)-2,2,2-trifluoro-1-(9′-anthryl)ethanol.     

Rapid syntheses of (±)-pterocarpans and isoflavones via the gold-catalyzed annulation of aldehydes and alkynes

(±)-Pterocarpan and analogues (4a-c) have been synthesized efficiently via the annulation of salicylaldehydes (1a, 1b and 1c) and o-methoxymethoxylphenylacetylene (2a), followed by a one-pot reduction and acidic cyclization of the ketones (3a-c). In addition, isoflavone derivatives (5a-c) have been synthesized rapidly, in two steps, via the annulation of salicylaldehyde (1a) and arylacetylenes (2b, 2c and 2d), followed by IBX/DMSO oxidation of the isoflavanones (3d, 3e and 3f).     

Total synthesis of eurypamides, marine cyclic-isodityrosines from the Palauan sponge Microciona eurypa

Total synthesis of eurypamides A, B, and D, 1, 2, and 4, has been successfully accomplished. The Tl(NO₃)₃ (TTN) oxidation of the halogenated bisphenols, 14a, 14b, 24, and 43, effected regio-controlled cyclization to provide the corresponding diaryl ethers, 15a, 15b, 25, and 46. This investigation revealed a structural revision of eurypamide A as to possess (2″S,3″R,4″S)-configuration (47), along with the spectral data of pure 2 and 4, which were previously characterized in a mixture.     

The new dispirobino and dispiroansa spermine derivatives of cyclotriphosphazenes

In this study, the crystal structures of the dispiroansa spermine derivatives of cyclotriphosphazene are characterised for the first time. The reaction of spiro-, gem-disubstituted cyclotriphosphazene derivatives, N₃P₃Cl₄R₂ [R = NHPh, (HN(CH₂)₃NH)_0.5, (OCH₂C(CH₃)₂CH₂O)_0.5], (1–3), with spermine (4), in aprotic solvents such as CH₂Cl₂ results in a series of dispirobino spermine derivatives of cyclotriphosphazene (5a, 6a, 7), namely spermine bridged compounds. Whereas, in protic solvents such as CHCl₃ give, dispiroansa derivatives (8–10) namely tetracyclic cyclotriphosphazene. The new series of dispirobino and dispiroansa spermine derivatives of cyclotriphosphazene (5a, 6a, 7–10) have been characterised by elemental analysis, mass spectrometry, X-ray (for 5a, 8, 10) and ¹H, ³¹P NMR spectroscopies.     

Metal binding studies using spiroacetal thiacrown ethers

The binding ability of a series of spiroacetal thiacrown ethers with Li⁺, Na⁺, K⁺, Cs⁺, Co²⁺, Cd²⁺, Ag⁺ and Pb²⁺ is reported. The thiacrown ethers showed an affinity for the heavy metals. The interaction of the three thiacrown ethers 1-3 and [Al(acac)₃] 5, [Co(NH₃)₅NO₂](BPh₄)₂6 and [Co(en)₃](BPh₄)₃7 complexes is also investigated.