Synthesis and structure of some cis-and trans-myrtanylstannanes

Enantiomerically pure cis- and trans-myrtanylstannanes cis-MyrSnPh₃ (1), trans-MyrSnPh₃ (2), cis-MyrSnPh₂Cl (3), trans-MyrSnPh₂Cl (4), cis-MyrSnPhCl₂ (5), trans-MyrSnPhCl₂ (6), cis-MyrSnCl₃ (7), trans-MyrSnCl₃ (8) were synthesized and fully characterized by ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. The molecular structures of 1, 3, 6, 7, and [trans-MyrSn(OH)Cl₂ · H₂O]₂ (8a) a hydrolysis product of 8, were determined by X-ray crystallography.     

Synthesis and reactions of sulfur-substituted indolizidinones

An aza-Diels-Alder reaction product 2 was readily converted to a tetrahydropyridine derivative 6, but its N-benzyl group was unexpectedly difficult to cleave under various conditions. On the other hand, the N-tosyl α,β-unsaturated ester 14 was transformed in one step by Mg/MeOH/Et₃N to a thio-substituted indolizidinone 3. This method was also extended to a methyl-substituted diene 16, which stereoselectively provided the cis-2,6-disubstitutedproduct 17. Further synthetic transformations yielded indolizidinones 20-24, including a formal synthesis of the natural product monomorine I.     

Synthesis and chemistry of tricyclic cyclopropene-tricyclo[3.2.2.0]nona-2(4),6-diene

The 1,2-bridged tricyclic cyclopropene, tricyclo[3.2.2.0^2,4]nona-2(4),6-diene (1), has been synthesized by the elimination of 2-bromo-4-chlorotricyclo[3.2.2.0^2,4]-non-6-ene (5). Cyclopropene 1 will undergo different isomerizations in ether solution and in neat conditions. Compound 1 rearranged to an anti-Bredt compound 4 via diradical mechanism in ether and tricyclic compound 6 via vinyl carbene mechanism in neat conditions. Compound 1 can be trapped with DPIBF at different temperatures yielding different results: the exo-endo adduct 2 (exo-addition from the view of the cyclopropene and endo-addition from the view of bicyclo[2.2.2]octene) is a sole product at 0°C by slowly addition of methyllithium, and the exo-endo adduct 2, endo-endo adduct 9, anti-Bredt adduct 3, and styrene 8 are isolated at ether refluxing temperature. Styrene 8 is proposed to be formed from endo-endo adduct 9 by diradical mechanism. The chemistry of exo-endo adduct 2 and endo-endo adduct 9 is as well studied. The exo-endo adduct 2 undergoes hydration in trifluoroacetic acid to generate 1,3-cis-diol 11 followed by eliminations of water and formaldehyde to give naphthalene 12. The endo-endo adduct 9 reacts with water in tetrahydrofuran-containing silica gel to yield 1,4-cis-diol 10. Both 9 and 10 react with trifluoroacetic acid to form trans-3-hydroxy trifluoroacetate 13. Compound 13 will undergo hydrolysis and isomerization to generate 1,3-cis-diol 11 in trifluoroacetic acid.     

The total synthesis of (−)-connatusin A, a hirsutane-type sesquiterpene isolated from the fungus Lentinus connatus BCC8996

The title sesquiterpenoid natural product 1 has been prepared for the first time using the enantiomerically pure cis-1,2-dihydrocatechol 3 as starting material. Key steps associated with the synthesis include a Diels-Alder cycloaddition reaction of the acetonide 5 with cyclopentenone (4) and an oxa-di-π-methane rearrangement of bicylco[2.2.2]octenone 6 derived from the initial adduct. The product of this sequence, the cyclopropannulated triquinane 7, was elaborated, over a further eight steps including those involving Upjohn dihydroxylation and Swern oxidation protocols, to the target 1. A single-crystal X-ray analysis served to confirm the structure of this synthetically derived material.     

Synthesis of enamides from aldehydes and amides

A range of double unsaturated amides (15, 19, and 21), obtained by cross-coupling reactions was reacted with aldehydes to hemiaminals. Heating the hemiaminals in the presence of Ac₂O and pyridine affected clean conversion to the corresponding enamides, such as 42, 45, and 47. Alternatively, N,S-acetals were prepared which were oxidized to the sulfones. Treatment with base also gave the enamides, favoring the cis-isomer. However, this method is less general. Application of these methods led to the natural products lansiumamide-A (30_cis), lansiumamide-I (31) and lansiumamide-B (32).     

Stereochemical studies—XIII: Cyclic aminoalcohols and related compounds—VI synthesis of the four 2-amino-4-t-butylcyclopentanol isomers

From diethyl 3-t-butyladipate (5), via cis- and trans-4-t-butylcyclopentene-1,2-oxide (31, 32) as key compounds, the syntheses of cis-2-amino-cis-4-t-butylcyclopentanol (1), cis-2-amino-trans-4-t-butylcyclopentanol (2), trans-2-amino-cis-4-t-butylcyclopentanol (3) and trans-2-amino-trans-4-t-butylcyclopentanol (4) have been achieved. 1, 3 and 4 were also synthesized from the corresponding 2-hydroxy-4-t-butylcarboxylic acids by Curtius degradation of the hydrazides (11, 18, 19). The steric course of process leading to the above compounds is discussed.     

cis-Palladium(II) complexes of derivatives of di-(2-pyridyl)methane: Study of the influence of the bridge group in the coordination mode

Palladium(II) complexes containing di-(2-pyridyl)-N-methylimine (1), di-(2-pyridyl)methanol (2) and di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate (4) ligands were synthesized and characterized by ¹H and ¹³C NMR in solution, IR and X-ray single crystal diffraction. Crystal structures of cis-dichloro[di-(2-pyridyl)-N-methylimine]palladium(II) (5), cis-dichloro[di-(2-pyridyl)methanol]palladium(II) (6) and cis-dichloro[di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate]palladium(II) (7) showed a bidentate coordination mode of the di-(2-pyridyl)methane derivatives 1, 2 and 4. In these complexes is observed the formation of a five-membered chelate ring with the iminic ligand 1 and six-membered chelate rings with the pyridinic ligands 2 and 4. In all complexes the palladium atom displays a distorted square planar geometry.     

A new class of azobenzene chelators for Mg and Ca in buffer at physiological pH

A new class of azobenzene-based chelators, trans-3a and trans-3b (3a and 3b), were designed and synthesized in two steps. Both 3a and 3b were readily dissolved in a buffer solution at physiological pH. The values of the dissociation constant of 3a and 3b for Mg²⁺ and Ca²⁺ were determined by the Hills plot; K_d^Mg=1.12 mM and K_d^Ca=660 μM for 3a and K_d^Mg=158 μM and K_d^Ca=200 μM for 3b, respectively. On irradiation at 489 nm light, 3a isomerized to give cis-form, which underwent cis-to-trans thermal isomerization in darkness at room temperature. The change in the absorption spectrum of the irradiated solution of 3a in the presence of Mg²⁺, showing the cis-to-trans thermal isomerization, indicates that the affinity of cis-3a for Mg²⁺ is lower than that of 3a.     

Endo and exo cyclometallated iron carbonyl complexes derived from N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine

The reaction of N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine (1) with Fe₂(CO)₉ in refluxing toluene gives endo cyclometallated iron carbonyl complexes 2 and 5, exo cyclometallated iron carbonyl complex 3, and unexpected iron carbonyl complex 4. Complexes 2, 3, and 5 are geometric isomers. Complex 5 differs from complex 2 in the switch of the original substituent from α to β position of the pyrrolyl ring, and the pyrrolyl ring bridges to the diiron centers in μ-(3,2-η¹:η²) coordination mode in stead of μ-(2,3-η¹:η²). In complex 4, the pyrrolyl moiety of the original ligand 1 has been displaced by a thienyl group, which comes from the same ligand. Single crystals of 2, 3, and 5 were subjected to the X-ray diffraction analysis. The major product 2 undergoes: (i) thermolysis to recover the original ligand 1; (ii) reduction to form a hydrogenation product, 6, of the original ligand; (iii) substitution to form a monophosphine-substituted complex 7; (iv) chemical as well as electrochemical oxidation to produce a carbonylation product, γ-butyrolactam 8.     

Design, synthesis and conformational analysis of turn inducer cyclopropane scaffolds: microwave assisted amidation of unactivated esters on catalytic solid support to obtain γ-turn mimic scaffolds

Novel constrained 1-aroyl-cyclopropane-2,3-cis-dicarboxylic acid bis-[(2-hydroxy-ethyl)-amides] (17a-e) with varied torsional angles have been synthesized in high yield from unactivated esters of 1-aroyl-2,3-cis-diethoxycarbonylcyclopropanes (15a-e) on a catalytic solid support with reduced reaction times by using the monomode-microwave irradiation; 15a-e were obtained by diastereoselective ethoxycarbonylmethylene transfer from a sulfur ylide to ethyl β-aroylacrylates (10a-e). Torsional angles and interatomic distance measurements on the energy minimized structures of the obtained molecules (17a-e, DFT, B3LYP/6-31G^∗ level) have established these molecules as valuable γ-turn mimic scaffolds.     

The case of a Cd2Cu2 complex containing an apparently C3-symmetric ligand: Erroneous ligand-structure assignment by X-ray diffraction data analysis

A simplified synthesis of a previously reported Cd₂Cu₂ complex 4 was developed in order to have a more readily available source of 1,3,5-tris(trifluoromethyl)-cyclohexane-cis,cis-1,3,5-triol 1, a unique tridentate ligand, only tentatively identified elsewhere. Attempts to liberate the ligand from 4 resulted in the sole formation of 2,4,6-tris(trifluoromethyl)-tetrahydropyran-cis,cis-2,4,6-triol (2); no traces of 1 were detected. A newly conducted X-ray analysis of complex 4 led to diffraction data that could be explained either by the previously reported structure for 4 or by the statistically disordered structure 5, containing ligand 2 rather than 1. Whereas refinement of both models led to equivalent merit factors, mass spectral data and elemental analysis of the crystals revealed unequivocally the sole presence of the tetrahydropyran derivative within the complex and proved thus the erroneous structure assignment 4 previously published for compound 5.     

Synthesis, coordination studies and redox properties of a novel ditertiary phosphine bearing two ferrocenyl groups

The new ferrocenyl substituted ditertiary phosphine {FcCH₂N(CH₂PPh₂)CH₂}₂ [Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (1) was prepared, in 72% yield, by Mannich based condensation of the known bis secondary amine {FcCH₂N(H)CH₂}₂ with 2 equiv. of Ph₂PCH₂OH in CH₃OH. Phosphine 1 readily coordinates to various transition-metal centres including Mo⁰, Ru^II, Rh^I, Pd^II, Pt^II and Au^I to afford the heterometallic complexes {RuCl₂(p-cym)}₂(1) (2), (AuCl)₂(1) (3), cis-PtCl₂(1) (4), cis-PdCl₂(1) (5), cis-Mo(CO)₄(1) (6), trans,trans-{Pd(CH₃)Cl(1)}₂ (7) and trans,trans-{Rh(CO)Cl(1)}₂ (8). In complexes 2, 3, 7 and 8 ligand 1 displays a P,P′-bridging mode whilst for 4-6 a P,P′-chelating mode is observed. All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 1, 2 · 2CH₂Cl₂, 3 · CH₂Cl₂, 4 · CH₂Cl₂, 6 · 0.5CHCl₃ and 8 have been elucidated by single crystal X-ray crystallography. Electrochemical measurements have been undertaken, and their redox chemistry discussed, on both noncomplexed ligand 1 and representative compounds containing this new ditertiary phosphine.     

Efficient and regioselective chromium(0)-catalyzed reaction of 2-substituted furans with diazo compounds: stereoselective synthesis of (2E,4Z)-2-aryl-hexadienedioic acid diesters

Pentacarbonyl(η²-cis-cyclooctene)chromium(0) (1) catalyzes efficiently reactions of diazo compounds with electron-rich furans. The reaction of 2-methoxyfuran (2) with alkyl α-diazoarylacetate (3a-g) furnishes the (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g) in excellent yields. These reactions are highly regioselective. The cyclopropanation intermediates formed from 1 and diazo compounds 3a-g always arise from a carbene addition to the less substituted CC bond of 2. The resulting cyclopropanation product undergoes a ring opening reaction to form the corresponding (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g). The pentacarbonylchromium(0)-catalyzed reactions of 2-alkylfuran (5a-b) with ethyl α-diazophenylacetate (3a) and 9-diazo-9H-fluorene (3h) produce the 1(E),3(E)-butadienes (6a-d) in very good yields.     

Aminobis(phenolate)s of imidomolybdenum(VI) and -tungsten(VI)

The reactions of trans-[MoO(ONO^Me)Cl₂] 1 (ONO^Me = methylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) dianion) and trans-[MoO(ONO^tBu)Cl₂] 2 (ONO^tBu = methylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenolate) dianion) with PhNCO afforded new imido molybdenum complexes trans-[Mo(NPh)(ONO^Me)Cl₂] 3 and trans-[Mo(NPh)(ONO^tBu)Cl₂] 4, respectively. As analogous oxotungsten starting materials did not show similar reactivity, corresponding imido tungsten complexes were prepared by the reaction between [W(NPh)Cl₄] with aminobis(phenol)s. These reactions yielded cis- and trans-isomers of dichloro complexes [W(NPh)(ONO^Me)Cl₂] 5 and [W(NPh)(ONO^tBu)Cl₂] 6, respectively. The molecular structures of 4, cis-6 and trans-6 were verified by X-ray crystallography. Organosubstituted imido tungsten(VI) complex cis-[W(NPh)(ONO^tBu)Me₂] 7 was prepared by the transmetallation reaction of 6 (either cis or trans isomer) with methyl magnesium iodide.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Electrostatic forces that determine O,O-trans versus O,S-cis conformers in the aminated porphyrin complexes of Cd(N-NHCO-2-C4H3O-tpp)(OAc) and Cd(N-NHCO-2-C4H3S-tpp)(OAc)

Two new diamagnetic, mononuclear and aminated porphyrin complexes of O,O-trans-Cd (3-trans) and O,S-cis-Cd (4-cis) have been synthesized and characterized by ¹H, ¹³C NMR spectroscopy. The crystal structures of (acetato)(N-2-furancarboxamido-meso-tetraphenylporphyrinato)cadmium(II) [Cd(N-NHCO-2-C₄H₃O-tpp)(OAc); 3-trans] and (acetato)(N-2-thiophenecarboxamido-meso-tetraphenylporphyrinato)cadmium(II) [Cd(N-NHCO-2-C₄H₃S-tpp)(OAc); 4-cis] were determined. The coordination sphere around Cd²⁺ is a distorted square-based pyramid in which the apical site is occupied by a bidentate chelating OAc⁻ group for 3-trans and 4-cis. The plane of three pyrrole nitrogen atoms [i.e., N(1), N(2), N(4) for 3-trans and N(1), N(2), N(3) for 4-cis] strongly bonded to Cd²⁺ is adopted as a reference plane 3N. The N(3) and N(4) pyrrole rings bearing the 2-furancarboxamido (Fr) and 2-thiophenecarboxamido groups in 3-trans and 4-cis, respectively, deviate mostly from the 3N plane, thus orienting separately with a dihedral angle of 33.4° and of 31.0°. In 3-trans, Cd²⁺ and N(5) are located on different sides at 1.06 and −1.49 Å from its 3N plane, while in 4-cis, Cd²⁺ and N(5) are also located on different sides at 1.04 and −1.53 Å from its 3N plane. An attractive electrostatic interaction between the Cd²⁺ and O(4)⁻ atoms in furan stabilizes the O,O-trans conformer of 3. A repulsive electrostatic interaction between Cd²⁺ and S(1)⁺ destabilizes the O,S-trans conformer of 4. Both of these repulsive and the mutually attractive interactions between S(1)⁺ and O(3)⁻ atoms favor the O,S-cis rotamer of 4 both in the vapor phase and in low polarity solvents. NOE difference spectroscopy, HMQC and HMBC were employed for the unambiguous assignment of the ¹H and ¹³C NMR resonances of 3-trans and 4-cis in CDCl₃ at 20 and −50 °C.     

Synthesis of the fungal natural product (−)-xylariamide A

The first synthesis of the fungal natural product (−)-xylariamide A 1 is reported. N,O-Bis(trimethylsilyl)acetamide induced coupling of d-tyrosine with (E)-but-2-enedioic acid 2,5-dioxo-pyrrolidin-1-yl ester methyl ester 5 produced the dechloro natural product 6, which was subsequently monochlorinated using oxone and KCl to yield synthetic 1. (−)-Xylariamide A 1, (+)-xylariamide A 2 and (−)-dechloroxylariamide A 6 displayed no cytotoxic or antimicrobial activity.     

Stereoselective synthesis of (−)-diospongins A and B and their stereoisomers at C-5

Antiosteoporotic diarylheptanoids (−)-diospongins A (1) and B (2) were synthesized stereoselectively. The key steps in the synthesis include a stereospecific Pd^II-catalyzed cyclization of chiral 1,5,7-trihydroxy-2-heptenes, 6a and 6b, to form cis and trans tetrahydropyran rings and a regioselective Wacker oxidation of β-(tetrahydro-2H-pyran-2-yl)styrenes, 5a and 5b. Their C-5 epimers 3 and 4 were also synthesized.     

Synthesis of 1,4-disilacyclohexa-2,5-dienes

Title compounds of the type 2,3,5,6-tetraphenyl-1,4-di-X-1,4-di-Y-1,4-disilacyclohexa-2,5-diene wherein X=Y=NMe₂ (4); X=NMe₂, Y=Cl (cis, trans-5); X=NMe₂, Y=Me [(trans)-6] and X=t-Bu, Y=Cl (trans-8) were synthesized from Si₂(NMe₂)₅Cl, sym-Si₂(NMe₂)₄Cl₂, sym-Si₂(NMe₂)₄Me₂, and sym-Si₂Cl₄(t-Bu)₂, respectively, in the presence of diphenylacetylene at 200 °C. Similarly the analogous title compound from the combination of 1-phenyl-1-propyne and Si₂(NMe₂)₅Cl [X=Y=NMe₂ (cis and trans-7) was synthesized. In all cases where cis/trans diastereomers could arise from two different silicon substituents (5, 6, 8) the trans isomer was the sole or dominant product. Evidence for the intermediacy of the silylene Si(NMe₂)₂ in these reactions was gained from a trapping experiment. Compound 4 upon treatment with SiCl₄, SiBr₄ or PI₃ provided the corresponding 1,1,4,4-tetrahalo derivatives 9a-c, respectively. Treatment of 4 with MeOH or PhOH gave the 1,1,4,4-tetramethoxy and tetraphenoxy analogues 9d and 9e, respectively. The tetrachloro derivative 9a upon LAH reduction led to the corresponding tetrahydro compound 10, while the reaction of 9a with H₂O gave the tetrahydroxy derivative 11. Allowing (trans)-6 to react with SiCl₄ provided a ca. 1:1 cis/trans ratio of the derivative 12 in which X=Cl, Y=Me, and possible pathways that rationalize this loss of stereochemistry are proposed. Synthesis of trans-13 in which X=t-Bu, Y=H was achieved by LAH reduction of 8. All of the title compounds except 8 experience free phenyl rotation at room temperature. At −30 °C this rotation in 8 is essentially halted. The molecular structures of 4, 8, 9c, 9e, 10 and 13 were determined by X-ray crystallography.