随机应力过程下半椭圆型表面裂纹的扩展

本文应用随机平均原理研究了在随机载荷作用下具有随机抗裂特性的构件所含半椭圆型表面裂纹的疲劳扩展。导出了支配半椭圆型表面裂纹尺寸的转移概率密度的ＦＰＫ方程，给出了裂纹扩展方程在表面和深度两个方向互不耦合情形下的解析解。通过数例详细考察了具有确定性抗裂特性的构件所含半椭圆型表面疲劳裂纹在平稳窄带高斯应力作用下的扩展行为，并有和数字模拟验证方法的有效性。     

负超载对Al-2024疲劳裂纹扩展的影响

本文讨论了负超载对Al-2024铝合金材料疲劳裂纹扩展的影响,试验发现在大量负超载循环周次之后也有裂纹停滞现象发生。这种停滞现象的产生与剪切唇的形成有关。本文发现负超载期间的剪切唇(简称剪切唇Ⅰ)和负超载之后的剪切唇(简称剪切唇Ⅱ)对疲劳裂纹扩展速率影响的程度不同。从裂纹闭合的观点建立了负超载对疲劳裂纹扩展影响的计算模型。     

疲劳裂纹扩展随机模型研究近期进展

自1979年Virkler等人发表揭示疲劳裂纹扩展的统计性质的实验结果以来,各国学者相继提出了多个疲劳裂纹扩展的随机模型．本文从数学与物理角度对这些模型作了概括与评述,指出了各个模型之间的关系,并对今后应作的进一步研究提出了我们的看法．      

STOCHASTIC PROPAGATION OF SEMI-ELLIPTICAL SURFACE CRACK

The semi-elliptical surface crack growth of structural components withuncertain material resistance under random loading is studied by using the stochasticaveraging principle.The FPK equation governing the transition probability densityfunction of crack lengths is derived.The analytical solution of the FPK equation forthe case of that the equations for the crack growth in the surface and depth directionsare uncoupled is obtained.The effects of the parameters of the stress process and of thematerial property on the behavior of semi-elliptical fatigue crack growth of thecomponents with deterministic resistance to crack growth in the stationary Gaussianstress process are examined.The comparison of the analytical result with digitalsimulation shows the effectiveness of the present method.     

疲劳裂纹扩展分析的随机方法

本文介绍了近年发展起来的疲劳裂纹扩展分析的随机方法,即疲劳裂纹扩展随机模型建立方法和疲劳裂纹扩展统计分析方法。这一分析方法为金属构件疲劳裂纹扩展寿命及可靠性研究提供了有力的工具。      

复合加载下疲劳裂纹扩展速率研究

本文提出了一种计算曲折裂纹尖端应力强度因子的简单方法。对一种油井钻杆材料在不同Ⅰ－Ⅱ复合比加载下的疲劳裂纹扩展行为的研究表明，Ⅱ型成分成对裂纹扩展速率有两种趋势相反的影响作用，并得到了一个计算复合型裂纹扩展速率的Ｐａｒｉｓ形式的公式。     

随机超载对疲劳裂纹扩展迟滞效应的模拟

考虑超载的迟滞效应,对随机超载作用下的疲劳裂纹扩展进行了模拟计算.载荷谱为在基本恒幅循环载荷基础上加入一以泊松流发生的随机超载序列,超载的大小为均匀分布.采用裂纹闭合模型考虑超载的迟滞效应,认为裂纹张开应力在超载引起的塑性区内按线性规律衰减.循环续循环模拟计算出裂纹从初始长度一直到疲劳破坏的扩展曲线.据此,计算了各种超载发生强度和大小下的疲劳裂纹扩展寿命的平均值与标准差.     

A STUDY OF CRACK CLOSURE IN ELECTRIC-FIELD-INDUCED FATIGUE IN FERROELECTRIC CERAMICS

Considering the influence of the domain switching near the tip of a crack and apply-ing the idea of multiscale singularity fields in piezoelectric fracture,we have obtained an empiricalcriterion for the crack closure.Based on the domain switching in the electric yield region,referringto Yang's results on the small scale yield model for the electrical fatigue crack,a model of thecrack closure during electric-field-induced fatigue is developed to analyze the crack growth.Interms of the model we have obtained the formula of the rate of the crack growth under cyclicelectric loading.Finally we compare the theoretical predictions with the results given by Cao andEvans experimentally.It should be pointed out that the model proposed is empirical and needsto be verified by more experimental results.     

疲劳裂纹扩展的随机模型

本文从J.L.Bogdanoff提出的一种新的疲劳裂纹扩展模型出发，假定在裂纹扩展过程中存在不同的等概率均匀扩展区间，采用Z变换和其复数反演理论，推导出疲劳裂纹经任意次载荷循环后的失效概率计算的解析公式，计算结果与实验值符合较好、偏保守。     

疲劳裂纹塑性闭合特性的数值分析方法

塑性诱导裂纹闭合是导致裂纹闭合发生的主要机理之一.利用弹塑性有限元法模拟含中心裂纹矩形板试件的疲劳裂纹扩展,并确定疲劳裂纹张开、闭合应力水平.通过计算,考察应力比R、裂纹长度、最大应力强度因子Kmax等对疲劳裂纹张开闭合应力的影响规律.论文阐述了所采用的裂纹扩展模拟方法及确定裂纹张开和闭合应力的原理.采用了等K加载方式,即在裂纹扩展中裂尖应力强度因子的最大值Kmax保持不变(给定R比,最大应力σmax随裂纹长度变化).分析了两种Kmax水平下R比分别为0.3,0,-0.5和-1.0共8种载荷工况.结果表明,对各个载荷工况,用瞬时最大应力σmax正则化的裂纹张开、闭合应力水平σop/σmax和σcl/σmax与裂纹长度无关.等K循环加载比等幅循环加载更有利于分析影响裂纹闭合水平的因素和闭合效应对疲劳裂纹扩展的影响规律,为建立基于裂纹闭合效应的疲劳裂纹扩展规律模型提供了一种新的思路.     

考虑材料循环塑性的疲劳裂纹扩展模拟

提出了一种考虑材料循环塑性性能的研究疲劳裂纹扩展与闭合行为的有限元模拟方法．对所选用的循环塑性本构关系进行了基本实验检验．探讨了在疲劳裂纹扩展有限元分析中网格尺寸的影响，给出了网格优化准则．研究了在循环硬化条件下考虑裂纹合效应时裂纹面张开廓形、裂纹尖端应力、应变场和正反向塑性区的演变规律．对于循环硬化和不同循环应力比Ｒ等因素对裂纹张开应力水平的影响也作了考察     

单向加载,平均应力下的疲劳短裂纹生长

本文报道单向加载下平均应力和交变应力对疲劳短裂纹生长的影响。采用一种1.99%NiCrMo钢,在平均应力和交变应力不同组合的应力控制条件下进行室温疲劳试验,将疲劳过程划分为3个阶段:塑性局部化,微观组织短裂纹(MSC)生长和物理短裂纹(PSC)生长,研究了平均应力对上述3个阶段的影响并得到一组关系式,这些关系式可预测多种平均应力和交变应力组合条件下短裂纹的初始阶段和生长行为。获得了不同平均应力下疲劳承载曲线的满意的预测结果。本研究为仍依赖于传统的Goodman疲劳图的设计人员提供了一种以疲劳过程物理机制为基础的方法。     

基于随机点过程理论的疲劳裂纹随机扩展模型

本文根据疲劳裂纹扩展特性，运用随机点过程理论导出了求取裂纹扩展随机过程低阶矩的公式。同时根据二阶矩近似法用Ｗｅｉｂｕｌｌ分布近似给定寿命下的疲劳纹长度分布。给出了求取给定寿命下裂纹超值概率分布和给定裂纹长度下疲劳寿命分布公式。最后，用小样本孔边短裂纹扩展数据对模型适用性进行了初步验证。     

FATIGUE GROWTH MODELING OF MIXED-MODE CRACK IN PLANE ELASTIC MEDIA

This paper presents an extension of a displacement discontinuity method with cracktip elements （a boundary element method） proposed by the author for fatigue crack growth analysis in plane elastic media under mixed-mode conditions. The boundary element method consists of the non-singular displacement discontinuity elements presented by Crouch and Starfield and the crack-tip displacement discontinuity elements due to the author. In the boundary element implementation the left or right crack-tip element is placed locally at the corresponding left or right crack tip on top of the non-singular displacement discontinuity elements that cover the entire crack surface and the other boundaries. Crack growth is simulated with an incremental crack extension analysis based on the maximum circumferential stress criterion. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the numerical approach. Crack growth is modeled by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characteristics of some related elements are adjusted according to the manner in which the boundary element method is implemented. As an example, the fatigue growth process of cracks emanating from a circular hole in a plane elastic plate is simulated using the numerical simulation approach.     

A CATASTROPHE ANALYSIS ON THE STABILITY OF THE CRACK GROWTH IN THREE-POINT BENDING SPECIMENS

This paper presents an attempt at the application of catastrophe theory to the stabilityanalysis of J-controlled crack growth in three-point bending specimens. By introducing the solutions ofJ-integral in the completely yielding state for the ideal plastic material, the critical condition of losingstability for the crack propagation in the specimen is obtained, based on the cusp catastrophe theory.The process of the crack growth from geometrical sense is described.     

高强度钢的超高周疲劳裂纹扩展模型研究

当疲劳寿命在106或107周时,W(o)hler S-N曲线被看作渐近于水平轴,107的疲劳强度被看成是疲劳极限.现代应用要求延长零件的工作寿命,实际齿轮部件应用超过107循环的疲劳失效.论文应用压电超声疲劳试验机对经过热处理和渗碳处理后的低铬合金钢材料进行研究,采用红外摄像仪观测试件表面的温度场随疲劳裂纹萌生和扩展的过程.试验条件是室温,应力比为0.1(R=0.1),频率为20 kHz.通过对表面渗碳处理后试件的断口分析,探讨表面渗碳处理、微观结构和与杂质有关的断裂机理,根据Paris公式建立超高周疲劳裂纹扩展模型.对裂纹扩展过程中裂纹尖端的塑性区的分析结果,结合传热学原理,建立热耗散模型,有限元方法的数值解结果较好地符合红外摄像仪的观测的试验结果.     

面内裂纹扩展问题的虚拟裂纹闭合法和离散内聚力模型

论文介绍了处理面内裂纹扩展问题的两种断裂单元,分别为处理线性问题的VCCT哑节点断裂单元和处理非线性问题的DCZM断裂单元.并与有限元软件ABAQUS的断裂单元相对比,以验证其计算准确性和对网格、步长等不敏感性,以及计算效率高等特点.     

不均匀裂纹体疲劳裂纹扩展的实验研究和分析

本文提出了裂纹在硬区的软对硬不均匀裂纹体的力学分析模型.疲劳实验研究表明,这种不均匀性影响疲劳裂纹扩展速率.文中的疲劳载荷下不均匀裂纹体的边界元数值计算结果表明,随着疲劳裂纹的扩展,在相同扩展步下,裂纹距软硬区界面越近,裂纹张开位移的幅值△COD 越小,J 积分幅值△J 亦越小.不均匀性对疲劳裂纹扩展速率的影响,主要通过影响△J 来实现.裂纹与软硬区界面的距离越近,疲劳裂纹扩展速率越小.     

EFFECT OF LOADING TYPE ON FATIGUE CRACK GROWTH BEHAVIOR OF SOLDER JOINT IN ELECTRONIC PACKAGING

Fatigue cracking tests of a solder joint were carried out using in-situ scanning electron microscopy （SEM） technology under tensile and bending cyclic loadings. The method for predicting the fatigue life is provided based on the fatigue crack growth rate of the solder joint. The results show that the effect of the loading type on the fatigue crack growth behavior of a solder joint cannot be ignored. In addition, the finite element analysis results help quantitatively estimate the response relationship between solder joint structures. The fatigue crack initiation life of a solder joint is in good agreement with the fatigue life （N50%） of a totally electronic board with 36 solder joints.     

用非局部弹性场论研究圆盘状裂纹问题

本文采用非局部弹性理论。用Love位移函数导出三维轴对称问题的非局部弹性应力的一般形式解,并求解了圆盘裂纹问题。得到了裂纹尖端区的应力是有界的,再次证实了非局部理论模型求解断裂力学问题的正确性。