Simple, general, and efficient synthesis of meso-substituted borondipyrromethenes from a single platform

An unprecedented synthesis of 8-substituted-borondipyrromethenes is described starting from 8-thiomethylbodipy 1. Aryl, heteroaryl, alkenyl, and organometallic boronic acids smoothly reacted with 1 in the presence of a catalytic amount of Pd(0) and a stoichiometric amount of Cu(I)-2-thienylcarboxylate under neutral conditions to give the corresponding Bodipy analogues in good to quantitative yields (20 examples). A remarkable reactivity was observed in some cases, e.g., ferrocenylboronic acid gave the product in 98% isolated yield after only 10 min at 55 degrees C.     

Naphthidine di(radical cation)s-stabilized palladium nanoparticles for efficient catalytic Suzuki-Miyaura cross-coupling reactions

Stable Pd(0) nanoparticles were prepared at room temperature in 1,4-dioxane from PdCl₂ using N,N′-bis(4-methoxyphenyl)-(1,1′-binaphthyl)-4,4′-diamine (naphthidine) as reducing and stabilizing agent. This procedure resulted in Pd(0) particles possessing an average diameter of ca. 25 nm stabilized against aggregation due to a barrier of the naphthidine di(radical cation) Napht^2.2+. These particles were evaluated for their capability to act as catalysts in Suzuki-Miyaura coupling reactions. The Pd(0)/Napht^2.2+ provides a general and convenient method to prepare biaryls from aryl bromides or iodides and boronic acids with a broad range of functional groups in 1,4-dioxane at 80 °C and under aerobic conditions.     

Synthesis of spiro-pyridones and spiro-quinolones by sequential palladium on carbon-catalyzed allylation and ring closing metathesis reactions

A rapid and efficient strategy for the preparation of spiro-pyridones and spiro-quinolones using sequential Pd(0)/C-catalyzed allylation and ring closing metathesis reactions is described. The developed protocol features a fully regioselective allylation at C3 taking advantage of the unusual reactivity of Pd(0)/C catalyst. Application of the present methodology in nucleoside chemistry has also been investigated.     

Comparative study of catalytic activity of Pd loaded hydroxyapatite and fluoroapatite in butan-2-ol conversion and methane oxidation

Palladium loaded calcium-hydroxyapatite, Pd(z)/CaHAp, and calcium-fluoroapatite, Pd(z)/CaFAp, were synthesised and characterised by TEM, XRD, IR and UV–vis–NIR spectroscopies. Introduction of palladium does not change the structure of CaHAp and CaFAp. The average size of PdO particles was found to be around 4–5 nm on Pd(1)/CaHAp but larger (6–7 nm) on Pd(1)/CaFap. The acid–base properties of the supports and of the catalysts were studied using butan-2-ol conversion. On CaHAp and CaFAp, the butenes yield (dehydration reaction) is very low either in the absence or in the presence of oxygen. The methyl ethyl ketone yield (dehydrogenation reaction) is significant only in the presence of oxygen and higher over CaFAp. Conversely, the performances of Pd(z)/CaHAp are better than those of Pd(z)/CaFAp below 180 °C. Above 180 °C, buta-2-ol combustion is favoured on Pd/CaHAp but not on Pd/CaFAp.

In methane oxidation, Pd(z)/CaHAp showed also a much larger activity than Pd(z)/CaFAp. On 2 wt% Pd loaded CaHAp, the methane oxidation reaches a conversion of almost 100% at 350 °C, which is comparable with the performance of conventional Pd/Al₂O₃ catalysts. The reducibility of PdO under methane–oxygen mixtures is lower on Pd(z)/CaHAp. For both reactions, the lower activity of Pd(z)/CaFAp is related to its higher acidity, resulting from the substitution of OH⁻ by F⁻, and to the larger PdO particle size.     

Lewis acid-promoted oxidative addition of thioimidates to Pd0

The isomeric S-methyldihydropyrrins 9-Z and 9-E exhibit markedly different behavior in Pd(0)-catalyzed cross-coupling reactions. Thioimidates 9-Z are readily converted to imines 10-Z employing Pd(0)/AlkZnI. Under identical conditions 9-E are inert. Oxidative addition to Pd(0) requires activation by Zn or other Lewis acids, which is sterically unfavorable with 9-E. Analogous results were obtained with the related thioimidates 11-E,Z as well as with methylthiopyridines 19alpha-gamma. In the case of both 11 and 19 oxidative addition to Pd(0) was greatly facilitated in the presence of BF(3) x Et(2)O. The importance of Lewis acid activation to Pd(0) oxidative addition in such substrates appears to be a general phenomenon not previously recognized.     

Highly efficient syntheses of [methyl-11C]thymidine and its analogue 4'-[methyl-11C]thiothymidine as nucleoside PET probes for cancer cell proliferation by Pd(0)-mediated rapid C-[11C]methylation

Pd(0)-mediated rapid couplings of CH(3)I (and then [(11)C]CH(3)I) with excess 5-tributylstannyl-2'-deoxyuridine and -4'-thio-2'-deoxyuridine were investigated for the syntheses of [methyl-(11)C]thymidine and its stable analogue, 4'-[methyl-(11)C]thiothymidine as PET probes for cancer diagnosis. The previously reported conditions were attempted using Pd(2)(dba)(3)/P(o-CH(3)C(6)H(4))(3) (1?:?4 in molar ratio) at 130 °C for 5 min in DMF, giving desired products only in 32 and 30% yields. Therefore, we adapted the current reaction conditions developed in our laboratory for heteroaromatic compounds. The reaction using CH(3)I/stannane/Pd(2)(dba)(3)/P(o-CH(3)C(6)H(4))(3)/CuCl/K(2)CO(3) (1?:?25?:?1?:?32?:?2?:?5) at 80 °C gave thymidine in 85% yield. Whereas, CH(3)I/stannane/Pd(2)(dba)(3)/P(o-CH(3)C(6)H(4))(3)/CuBr/CsF (1?:?25?:?1?:?32?:?2?:?5) including another CuBr/CsF system promoted the reaction at a milder temperature (60 °C), giving thymidine in 100% yield. Chemo-response of thiothymidine-precursor was different from thymidine system. Thus, the above optimized conditions including CuBr/CsF system gave 4'-thiothymidine only in 40% yield. The reaction using 5-fold amount of CuBr/CsF at 80 °C gave much higher yield (83%), but unexpectedly, the reaction was accompanied by a considerable amount of undesired destannylated product. Such destannylation was greatly suppressed by changing to a CuCl/K(2)CO(3) system using CH(3)I/stannane/Pd(2)(dba)(3)/P(o-CH(3)C(6)H(4))(3)/CuCl/K(2)CO(3) (1?:?25?:?1?:?32?:?2?:?5) at 80 °C, giving the 4'-thiothymidine in 98% yield. The each optimized conditions were successfully applied to the syntheses of the corresponding PET probes in 87 and 93% HPLC analytical yields. [(11)C]Compounds were isolated by preparative HPLC after the reaction conducted under slightly improved conditions, exhibiting sufficient radioactivity of 3.7-3.8 GBq and specific radioactivity of 89-200 GBq μmol(-1) with radiochemical purity of ≥99.5% for animal and human PET studies.     

Coupling Reactions of Alkynylsilanes Mediated by a Cu(I) Salt: Novel Syntheses of Conjugate Diynes and Disubstituted Ethynes

Reaction of 1-trimethylsilylalkyne with copper(I) chloride in a polar solvent, DMF, at 60 degrees C under an aerobic conditions smoothly undergoes homo-coupling to give the corresponding symmetrical 1,3-butadiynes in 70-99% yields. In addition, (arylethynyl)trimethylsilanes are found to couple with aryl triflates and chlorides in the presence of Cu(I)/Pd(0) (10 mol %/5 or 10 mol %) cocatalyst system to give the corresponding diarylethynes in 49-99% yields. The cross-coupling reaction is applied to a one-pot synthesis of the corresponding unsymmetrical diarylethynes from (trimethylsilyl)ethyne via sequential Sonogashira-Hagihara and the present cross-coupling reactions using two different aryl triflates. The reactions of (arylethynyl)trimethylsilanes with aryl(chloro)ethynes in the presence of 10 mol % of CuCl also yield the corresponding unsymmetrical 1,3-butadiynes in 43-97% yields.     

Sequential hydrocarbon functionalization: allylic C-H oxidation/vinylic C-H arylation

A Pd(II)/sulfoxide-catalyzed sequential allylic C-H oxidation/vinylic C-H arylation of alpha-olefins to furnish E-arylated allylic esters in high regio- and E:Z selectivities (>20:1) is reported. The broad scope of this method with respect to the alpha-olefin, carboxylic acid, and aryl boronic acid enables the rapid assembly of densely functionalized fragments for complex molecule synthesis from cheap, abundant hydrocarbon starting materials. The Pd(II)/sulfoxide-catalyzed vinylic C-H arylation of electronically unbiased olefins with aryl boronic acids proceeds under oxidative, acidic conditions and mild temperatures (room temperature to 45 degrees C).     

Unexpected deprotection of silyl and THP ethers induced by serious disparity in the quality of Pd/C catalysts and elucidation of the mechanism

Commercial Pd/C catalysts show different catalytic activity toward the deprotection of silyl and THP ethers. The Pd/C purchased from Merck and ACROS exhibits marked tendency to cleave these protective groups unexpectedly without hydrogen conditions although Aldrich's Pd/C (20,569-9) is inactive in the absence of hydrogen. It was proved that the Pd/C disparity toward the deprotection of TES and THP ethers results from residual acids and/or palladium chloride in the production process of Pd/Cs. Although a TES ether cleavage reaction in the absence of hydrogen and a THP ether cleavage reaction in the presence of hydrogen using 10% Pd/C were recently published, we could conclude they were only an acid-catalyzed solvolysis, the acid being released from the catalyst. Hydrogen is essential for the actual 10% Pd/C-catalyzed cleavage of TES ethers and THP ethers which must be stable under the true Pd/C-catalyzed hydrogenation conditions.     

Ionic liquid [BMIM]PF6 as a medium for the selective hydrogenation of 1,4-diacetoxybut-2-yne on the Pd-containing catalysts

A possibility of using a ionic liquid, 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM]PF₆), as a reaction medium in the liquid-phase hydrogenation of 1,4-diacetoxybut-2-yne was examined. Two types of catalysts were studied: Pd(10%)/C and the palladium-containing catalytic system based on the biopolymer chitosan supported on silica gel (Pd(1%)/chitosan/SiO2). The data obtained indicate high selectivity of hydrogenation of 1,4-diacetoxybut-2-yne to cis-1,4-diacetoxybut-2-ene under selected conditions.     

Suzuki-Miyaura reactions of arenediazonium salts catalyzed by PD(0)/C. One-pot chemoselective double cross-coupling reactions

The Suzuki-Miyaura cross-coupling of arenediazonium tetrafluoroborate salts with boronic acid partners catalyzed by Pd(0)/C is described as a practical and efficient alternative to classical homogeneous conditions. Reactions conducted in alcoholic solvents proved to be extremely fast using mild conditions. Additionally, we developed a chemoselective double Suzuki-Miyaura cross-coupling in a single reaction vessel allowing the synthesis of unsymmetrical terphenyls.     

Suzuki-Miyaura coupling reaction using pentafluorophenylboronic acid

[reaction: see text] We have found new conditions for the Suzuki-Miyaura coupling reaction applicable to pentafluorophenylboronic acid (C(6)F(5)B(OH)(2)) (1), which is an inactive substrate under normal conditions. The reactions of 1 with phenyl iodide or bromide under Pd(PPh(3))(4)/CsF/Ag(2)O or Pd(2)(dba)(3)/P(t-Bu)(3)/CsF/Ag(2)O catalytic system conditions gave 2,3,4,5,6-pentafluoro-1,1'-biphenyl (3a) in more than 90% yields. Combination of CsF and Ag(2)O was essential for promoting these reactions.     

Unexpected H2O-induced Ar-X activation with trifluoromethylpalladium(II) aryls

A series of new complexes [(L-L)Pd(Ar)(CF3)] (L-L = dppe, dppp, tmeda; Ar = Ph, p-Tol, C6D5) have been synthesized and fully characterized in solution and in the solid state. Remarkable Ph-X activation (X = I, Cl) by [(dppe)Pd(Ph)(CF3)] (1) has been found to come about to cleanly produce biphenyl and [(dppe)Pd(Ph)(X)]. This reaction does not take place under rigorously anhydrous conditions but in the presence of traces of water it readily occurs, exhibiting an induction period and being zero order in PhI. As shown by mechanistic studies, the role of water is to promote reduction of small quantities of the Pd(II) complex to Pd(0) which activates the Ph-X bond. Subsequent transmetalation to give diphenyl Pd complexes, followed by Ph-Ph reductive elimination give rise to the observed products. The water-induced reduction to catalytically active Pd(0) has been demonstrated to proceed via both the Pd(II)/P(III) to Pd(0)/P(V) redox mechanism and alpha-F transfer, followed by facile hydrolysis of the difluorocarbene to carbonyl, migratory insertion, and reductive elimination of PhC(X)O (X = F, OH, or OOCPh). In the absence of H2O and ArX, the diphosphine-stabilized trifluoromethyl Pd phenyl complexes undergo slow Ph-CF3 reductive elimination under reinforcing conditions (xylenes, 145 degrees C).     

In situ Raman and in situ XRD analysis of PdO reduction and Pd° oxidation supported on γ-Al2O3 catalyst under different atmospheres

Reduction of Pd° and decomposition of palladium oxide supported on γ-alumina were studied at atmospheric pressure under different atmospheres (H(2), CH(4), He) over a 4 wt% Pd/Al(2)O(3) catalyst (mean palladium particle size: 5 nm with 50% of small particles of size below 5 nm). During temperature programmed tests (reduction, decomposition and oxidation) the crystal domain behaviour of the PdO/Pd° phase was evaluated by in situ Raman spectroscopy and in situ XRD analysis. Under H(2)/N(2), the reduction of small PdO particles (<5 nm) occurs at room temperature, whereas reduction of larger particles (>5 nm) starts at 100 °C and is achieved at 150 °C. Subsequent oxidation in O(2)/N(2) leads to reoxidation of small crystal domain at ambient temperature while oxidation of large particles starts at 300 °C. Under CH(4)/N(2), the small particle reduction occurs between 240 and 250 °C while large particle reduction is fast and occurs between 280 and 290 °C. Subsequent reoxidation of the catalyst reduced in CH(4)/N(2) shows that small and large particle oxidation of Pd° starts also at 300 °C. Under He, no small particle decomposition is observed probably due to strong interactions between particles and support whereas large particle reduction occurs between 700 and 750 °C. After thermal decomposition under He, the oxidation starts at 300 °C. Thus, the reduction phenomenon (small and large crystal domain) depends on the nature of the reducing agent (H(2), CH(4), He). However, whatever the reduction or decomposition treatment or the crystal domain, Pd° oxidation starts at 300 °C and is completed only at temperatures higher than 550 °C. Under lean conditions, with or without water, the palladium consists of reduced sites of palladium (Pd°, Pd(δ+) with δ < 2 or PdO(x) with x < 1) randomly distributed on palladium particles.     

General method of obtaining deuterium-labeled heterocyclic compounds using neutral D2O with heterogeneous Pd/C

A protocol of a versatile H-D exchange reaction of heterocyclic compounds catalyzed by heterogeneous Pd/C in D₂O is described. The reaction of various nitrogen-containing heterocycles with 10% Pd/C (10 wt % of the substrate) under hydrogen atmosphere in D₂O as a deuterium source at 110-180 °C for 24 h afforded the corresponding deuterated compounds with satisfactory efficiency of deuteration in moderate to excellent isolated yields. Furthermore, the Pd/C-H₂-D₂O system can be extended to the direct deuteration of biologically active compounds such as sulfamethazine, which is used as a synthetic antibacterial drug for fat stocks and would be applied as a general method for the preparation of the standard materials for the analysis of residual chemicals in foods and so on.     

A Three-Component Arene Difunctionalization: Merger of C(sp3)/(sp2)−H Bond Addition

A tandem three-component C−H bond addition involving the activation of an inert C(sp³)−H bond is reported. The process enables the direct regioselective synthesis of 1,2-difunctionalized arenes with the formation of C(sp³)− and C(sp²)−C(arene) bonds. 2-Iodobenzoic acid derivatives behave as masked bifunctional reagent (BFR) and react with 2-pyridyl-methyl sulfoximine (MPyS) protected aliphatic acids bearing α,α-disubstituted groups, and alkenes to produce β-aryl-δ-alkenyl amide derivatives in a single operation. The transformation involves Pd(II)/Pd(IV) and Pd(II)/Pd(0) catalytic systems. Detailed mechanistic studies, including density functional theory (DFT) calculations, reveal the formation of large T-shaped palladacycles and the onset of a 1,2-palladium migration via decarboxylation.     

Cost-effective bio-derived mesoporous carbon nanoparticles-supported palladium catalyst for nitroarene reduction and Suzuki–Miyaura coupling by microwave approach

A new heterogeneous catalyst was synthesized by immobilizing Pd on areca nut kernel-derived carbon nanospheres (CNSs). The CNSs, without any further activation processes, accommodated 3% of Pd on their surface. The new Pd/CNS material was used for the reduction of nitroarenes and Suzuki–Miyaura coupling of bromoarenes with aryl boronic acids. The reactions were conducted under microwave irradiation at 160 °C using 12 mol% of Pd/CNS (0.36% actual Pd content). The reduction of nitroarenes into their respective amino compounds was achieved in 10–20 min (conversion up to 100%); by contrast, the Suzuki–Miyaura reactions yielded up to 98% at 150 °C with 10 mol% of Pd/CNS catalyst. The products were identified using gas chromatography and nuclear magnetic resonance spectroscopy. The catalyst was isolated from reaction mixture and reused without any significant loss in the activity. Thus, the present work introduces one-pot-derived porous CNSs as efficient catalytic support to Pd, establishing an alternative to existing Pd/C in terms of cost and efficiency.     

Hydrogenation of arenes over silica-supported catalysts that combine a grafted rhodium complex and palladium nanoparticles: evidence for substrate activation on Rh(single-site)-Pd(metal) moieties

The complex Rh(cod)(sulfos) (Rh(I); sulfos = (-)O(3)S(C(6)H(4))CH(2)C(CH(2)PPh(2))(3); cod = cycloocta-1,5-diene), either free or supported on silica, does not catalyze the hydrogenation of benzene in either homogeneous or heterogeneous phase. However, when silica contains supported Pd metal nanoparticles (Pd(0)/SiO(2)), a hybrid catalyst (Rh(I)-Pd(0)/SiO(2)) is formed that hydrogenates benzene 4 times faster than does Pd(0)/SiO(2) alone. EXAFS and DRIFT measurements of in situ and ex situ prepared samples, batch catalytic reactions under different conditions, deuterium labeling experiments, and model organometallic studies, taken together, have shown that the rhodium single sites and the palladium nanoparticles cooperate with each other in promoting the hydrogenation of benzene through the formation of a unique entity throughout the catalytic cycle. Besides decreasing the extent of cyclohexa-1,3-diene disproportionation at palladium, the combined action of the two metals activates the arene so as to allow the rhodium sites to enter the catalytic cycle and speed up the overall hydrogenation process by rapidly reducing benzene to cyclohexa-1,3-diene.     

Palladium-catalyzed amination of aryl halides on solid support

[reaction: see text] The first examples of the Pd(0)-catalyzed amination of aryl halides using Rink-resins as nitrogen source are described. Pd(2)dba(3)/BINAP/NaO-t-Bu was found to be the most efficient catalyst/base system, while a solvent mixture of dioxane and tert-butyl alcohol was shown to enhance the selectivity toward the desired monoarylation. Moderate to good yields and excellent purities of the amination products were found with electron-poor aryl halides, while electon-rich aryl halides failed to react under these conditions.     

Heterogeneous reductive isomerization reaction using catalytic Pd/C and H2

[reaction: see text] A highly selective catalytic reductive isomerization reaction is described. The extremely mild and neutral reaction conditions (10% Pd/C, H2, and MeOH at 0 degrees C) tolerate a wide range of functional groups and generally result in excellent yields. Mechanistic studies suggest that this reaction does not proceed via a stepwise reduction/elimination sequence or a pi-allylpalladium intermediate.