Immobilization strategies of Brucella particles on optical fibers for use in chemiluminescence immunosensors

Immunosensors are powerful analytical tools in clinical and veterinary diagnostics. This has led us to design a chemiluminescent immunosensor aimed at identifying anti-Brucella antibodies using optical fibers as the transducer. In order to develop the optimal transducer, to achieve an optimal chemical modification thereby allowing an optimal covalent binding of the protein receptor, several cleaning strategies and silane coupling agents were investigated. Brucella killed organisms were used as a model receptor for quantifying anti-Brucella IgG antibodies in a suspension compared to conventional colorimetric and chemiluminescent ELISA. A silane-benzophenone derivative was selected as the best performing silane coupling agent: the optical fiber immunosensor (OFIS) has showed the lowest limit of detection at 0.207 μg/ml, compared to 0.828 μg/ml and 0.414 μg/ml achieved by colorimetric and chemiluminescent ELISAs, respectively. These results, together with the additional advantages of rapidity, lower reagent volumes and moderate operating conditions, have set the grounds for further study in order to adapt this platform for on-site diagnostics of brucellosis disease markers.     

Micro-chemical sensors based on fiber-optic excitation of surface plasmons

In this paper the theoretical base and experimental results of a new class of fiber optical supported surface plasmon resonance spectroscopy (SPRS) transducer is given. Surface plasmons were excited by polychromatic light, and the resonant excitation is detected as an intensity minimum in the measured spectra at certain wavelengths. The excitation takes place at the end zone of a multimode fiber coated with a thin surface plasmon resonance supporting metal layer. As examples for the large application field of this transducer a fiber optical immunosensor for the detection of antibodies against bovine serum albumin and a gas sensor for remote detection of tetrachloroethene was constructed and tested successfully. The sensors were constructed following the theoretical predictions for an optimal performance.     

Chemiluminescent optical fiber immunosensor for the detection of anti-West Nile virus IgG

An ELISA-based optical fiber methodology developed for the detection of anti-West Nile virus IgG antibodies in serum was compared to standard colorimetric and chemiluminescent ELISA based on microtiter plates. Colorimetric ELISA was the least sensitive, especially at high titer dilutions. The fiber-optic immunosensor based on the same ELISA immunological rationale was the most sensitive technique.     

Label-free capacitive immunosensor based on quartz crystal Au electrode for rapid and sensitive detection of Escherichia coli O157:H7

A label-free capacitive immunosensor based on quartz crystal Au electrode was developed for rapid and sensitive detection of Escherichia coli O157:H7. The immunosensor was fabricated by immobilizing affinity-purified anti-E. coli O157:H7 antibodies onto self-assembled monolayers (SAMs) of 3-mercaptopropionic acid (MPA) on the surface of a quartz crystal Au electrode. Bacteria suspended in solution became attached to the immobilized antibodies when the immunosensor was tested in liquid samples. The change in capacitance caused by the bacteria was directly measured by an electrochemical detector. An equivalent circuit was introduced to simulate the capacitive immunosensor. The immunosensor was evaluated for E. coli O157:H7 detection in pure culture and inoculated food samples. The experimental results indicated that the capacitance change was linearly correlated with the cell concentration of E. coli O157:H7. The immunosensor was able to discriminate between cellular concentrations of 10²–10⁵ cfu mL⁻¹ and has applications in detecting pathogens in food samples. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were also employed to characterize the stepwise assembly of the immunosensor.     

Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.     

A novel biosensing interfacial design based on the assembled multilayers of the oppositely charged polyelectrolytes

A novel biosensing interfacial design strategy has been produced by the alternate adsorption of the oppositely charged polyelectrolytes. A quartz-crystal microbalance (QCM) as a model transducer was modified by use of mercaptoacetic acid (MAA) self-assembled monolayer (SAM) and the adsorption multilayers of the oppositely charged polyelectrolytes. MAA-SAM was first applied to the gold electrode surface of the crystal, and the positively charged chitosan was used as a double-sided linker to attach the negatively charged alginate-HSA antibodies to the negatively charged MAA-SAM layer. The assembly process and conditions were studied using the real-time output device and the surface topologies of the resulting crystals were characterized by atomic force microscopy (AFM) imaging. It is discovered that the optimal pH of immobilizing antibodies was 7.2 and the suited dilution ratio of antibodies was 10:30. The proposed immunosensor in optimal conditions has a linear detection range of 12.3-184.5 μg/mL for HSA detection. Comparing with the direct immobilization method of antibodies, the immunosensor with the proposed immobilization procedure shows some advantages, such as improved sensitivity due to the well-retained antibody activity and the significantly extended detection range. In particular, the regeneration of the developed immunosensor was simple and fast. Analytical results indicate that the developed immobilization procedure is a promising alternative for the immobilization of biorecognition element on the electrode surface.     

Regenerable immunobiosensor for the chemiluminescent flow injection analysis of the herbicide 2,4-D

A semi-automated chemiluminescent competitive immunosensor for the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) is presented. Anti-2,4-D polyclonal antibodies are directly labelled with horseradish peroxidase allowing a p-iodophenol enhanced chemiluminescent detection. Using antigen immobilised on UltraBind type pre-activated membranes, the 2,4-D immunosensor exhibits low non-specific/specific binding ratio (maximum ratio: 5%) of the labelled antibodies. The quantification of free 2,4-D in water is performed by co-injecting the sample and the labelled antibodies in the flow system, incubating this solution with the antigen immobilised membrane and measuring the amount of specifically bound labelled antibodies. Such an analytical system enables the detection of 4 mug l(-1) of free antigen in 20 min, and the 2,4-D detection is possible in the range 4 mug l(-1)-160 mg l(-1). The immunosensor can be regenerated by simply flowing a chaotropic solution (0.1 M HCl, 0.1 M NaCl, 0.1 M glycine) in the system. This regeneration ability enables the achievement of more than 30 measurement cycles of free 2,4-D with the same antigen immobilised membrane with a good reproducibility (RSD=12.5%).     

New Insights on Potentiometric Immunosensor at Carbon Fiber Microelectrode for Alpha-Fetoprotein in Hepatocellular Carcinoma

Herein, we investigated the analytical features of potentiometric immunosensors for detection of alpha-fetoprotein (AFP) in hepatocellular carcinoma at different electrodes, such as carbon fiber microelectrode (CFME) and carbon-disk electrode (CDE), respectively. To construct such an immunosensor, anti-AFP capture antibodies were first conjugated covalently onto the activated electrodes through typical carbodiimide coupling. Thereafter, one-step immunoreaction protocol was successfully introduced to develop a new potentiometric immunoassay upon addition of AFP. Accompanying the antigen-antibody reaction, the surface charges of the modified electrodes were changed for the readout of electric potential. Results indicated that the linear range of CDE-based immunosensor was 0.1–100 ng mL⁻¹ AFP, whereas the assay sensitivity by using CFME could be further increased to 3.2 pg mL⁻¹ with the linear range from 0.01 to 500 ng mL⁻¹ AFP. Meanwhile, CFME-based immunosensor showed high sensitivity, good reproducibility and specificity, and could be utilized for the analysis of human serum specimens with consistent results relative to commercialized ELISA kit.     

Sequential injection immunoassay for human bone morphogenic protein-7 using an immunoreactor immobilized with anti-human bone morphogenic protein-7 antibody–CdSe/ZnS quantum dot conjugates

The detection of human bone morphogenic protein-7 (BMP-7) was achieved using a sequential injection immunoassay (SIIA) system. The SIIA system is based on the binding between BMP-7 and anti-human BMP-7 (AbBMP7)–CdSe/ZnS quantum dot (QD) conjugates immobilized onto a glass disk or an optical fiber, using fluorescence detection at excitation and emission wavelengths of 470 nm and 580 nm, respectively. The AbBMP7–QD conjugates were prepared by conjugating anti-human BMP-7 antibody (AbBMP7) to hydrophilic CdSe/ZnS core/shell quantum dots (QDs). The SIIA system was fully automated using software written in the LabVIEW™ development environment. The analytical performance of the SIIA system was characterized with a number of variables such as carrier flow rate and elution buffer. Under partially optimized operating conditions, the SIIA system had a linear calibration graph at up to 10.0 ng mL⁻¹ BMP-7 (R² ≥ 0.975) and a sample frequency of two samples per hour. The SIIA system with an optical fiber immunosensor was used to detect and quantify BMP-7 in spiked real samples obtained from a biological process with recoveries in the range of 95–102%.     

Increasing the sensitivity of Listeria monocytogenes assays: evaluation using ELISA and amperometric detection

An immunosensor for the detection of Listeria monocytogenes was developed. ELISA and amperometric studies were run in parallel to develop a more sensitive and rapid assay for the bacterium. Conditions for the immunosensor were primarily characterised using ELISA. A direct sandwich assay was employed and the affinities of two polyclonal (goat and rabbit) and one monoclonal (mouse) anti-L. monocytogenes antibodies were compared using this format. Owing to low sensitivity being obtained with all antibodies, biotin-avidin amplification and an indirect sandwich assay were employed. The system was then transferred to screen-printed electrodes (SPEs), the primary antibody being immobilised by cross-linking with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide, and the mode of detection being amperometric. Various parameters (limit of detection, working range, incubation time, cross-reactivity) of the systems were characterised. The effect of direct incubation in milk is also discussed. The final immunosensor had a working range of 1 x 10(6)-1 x 10(3) cells ml-1 and a detection limit of 9 x 10(2) cells ml-1. The assay took about 3.5 h to complete.     

Development of a Ca2+‐Sensitive Electrostatic Self‐Assembly Films for the Fabrication of Reproducible Immunosensor

Abstract

A novel strategy for fabricating reproducible immunosensor has been developed by employing the merits of Ca²⁺‐induced cross‐linkage of sodium alginate and negative‐carboxyl groups of alginate. The alginate was used to modify the gold electrode and render the gold electrode negative charge to immobilize antibodies via electrostatic interaction between carboxyl groups on alginate and amino groups on antibodies to realize the fabrication of immunosensor in 0.01 mol/l pH 7.5 acetic‐acetate buffer solution. The Ca²⁺‐induced cross‐linkage of alginate on the immnosensor can release antibodies from electrode and regenerate one fresh alginate‐modified electrode for the fabrication of new immunosensor. The feasibility of the proposed strategy and qualities of the fabricated immunosensor was evaluated by being applied to a competitive transferrin‐transferrin antiserum immunoassay system.     

Piezoelectric immunosensor for bisphenol A based on signal enhancing step with 2-methacrolyloxyethyl phosphorylcholine polymeric nanoparticle

An immunoassay in which BPA competed with a BPA-horseradish peroxidase conjugate for binding to anti-BPA antibodies, coupled to a piezoelectric (PZ) immunosensor, was able to detect 0.1 ng mL(-1) BPA. To enhance the sensitivity of the assay, we tested nanoparticles approximately 200 nm in diameter, coupled to anti-BPA antibodies, to increase the mass change on the surface of the immunosensor and thereby increase the frequency shift detected. This second step, using nanoparticles coated with anti-BPA antibodies, improved the sensitivity of the assay by approximately eight times at BPA concentrations below 10 ng mL(-1). Field emission-scanning electron microscopy (FE-SEM) showed that polymeric 2-methacrolyloxyethyl phosphorylcholine (MPC) nanoparticles coupled to antibodies remained monodisperse on the surface of the immunosensor and therefore produced stable signals in the immunosensors. Since the frequency shift detected in the assay mainly originated from the mass change on the surface of the PZ crystal, the colloidal stability of the antibody-conjugated particles used in the enhancement step played an extremely important role in achieving a stable and highly sensitive signal.     

Chronoamperometry Measurement for Rapid Cucumber Mosaic Virus Detection in Plants

Cucumber mosaic virus (CMV) causes major losses to agricultural and horticultural crops around the world. Hence, a rapid assay for the detection of CMV which can be employed in both laboratory and field is essential. A portable electrochemical immunosensor system for the detection of CMV, based on immobilized CMV specific antibodies conjugated with gold nanoparticle was developed for this purpose. The conjugated antibodies were added with polymer and deposited onto carbon screen printed working electrodes. Optimization of the modified surface immunosensor was performed using sandwich immunoassay format (ELISA). The initial ELISA result for the standard curve development showed a limit of detection down to 0.1mg/mL. Subsequently, the immunosensor was tested for cross reactivity with other plant pathogens. The performance of the electrochemical immunosensor revealed that it has a high selectivity in sample matrix with other organism. This immunosensor provides a promising technology for simple and sensitive detection system that is essential in rapid detection of plant pathogens.     

FET immunosensor for hemoglobin A1c using a gold nanofilm grown by a seed-mediated technique and covered with mixed self-assembled monolayers

A micro FET-based immunosensor was developed for the determination of hemoglobin-A1c (HbA1c). The HbA1c/hemoglobin ratio is an important index in diabetes control. The sensor was fabricated by Complementary Metal-Oxide-Semiconductor Transistor (CMOS) and Micro Electronic Mechanical System (MEMS) techniques. The antibodies were immobilized via mixed self-assembled monolayers (SAMs) on a gold nanofilm. The nanofilm was deposited on a gold electrode by seed-mediated growth and gave a uniform and well distributed coverage. Nonspecific sites and interferences by noise were eliminated by covering the AuNPs with mixed SAMs. Compared to the immunosensor fabricated via the mixed SAMs method without gold nanofilm, the immunosensor displays a more than 2-fold sensitivity. The immunosensor is capable of detecting HbA1c and hemoglobin in hemolyzed and diluted whole blood, and results showed good agreement with the established clinical method.

Electrochemical Detection of Schistosoma Japonicum Antibody Using Biocatalytic Deposition

Abstract

An ultrasensitive electrochemical immunoassay based on biocatalytic deposition has been proposed for the detection of Schistosoma japonicum antibody (SjAb) in infected rabbit serum. Schistosoma japonicum antigen (SjAg) was immobilized on the gold electrode surface via glutaraldehyde crosslink and then incubated with infected rabbit serum containing SjAb; finally, the goat anti-rabbit IgG labeled with alkaline phosphatase was sandwiched to form the immunocomplex on the gold electrode surface. The alkaline phosphatase converted nonelectroactive substrate into the reducing agent and the latter, in turn, reduced metal ions to form electroactive metallic product on the electrode surface. Linear sweep voltammetry (LSV) was used to quantify the amount of the deposited silver and give the analytical signal for SjAb. Assay conditions such as the antigen concentration and enzymatic silver deposition time were optimized. The electrochemical immunosensor was able to realize a reliable determination of SjAb in the dilution range from 1:5000 to 1:100 with a detection limit of 1:6457 of dilution ratio. The feasibility of the proposed immunosensor for possible clinical applications was also investigated by analyzing real serum samples.     

Development of a non-labeled immunosensor for the herbicide trifluralin via optical waveguide lightmode spectroscopic detection

A highly sensitive immunosensor using optical waveguide lightmode spectroscopy (OWLS) was developed for the detection of the herbicide trifluralin. OWLS as an in situ and label free method of detection, based on the measurement of the diffraction of a linearly polarized laser beam (He-Ne laser, 632.8 nm) on a diffraction grating in a thin waveguide layer (SiO₂-TiO₂), offered means to produce immunosensors utilizing immobilized antibodies raised against trifluralin allowing a non-competitive biosensor, or immobilized trifluralin conjugate allowing a competitive biosensor for this analyte. Immobilization of molecules sensitizing the sensor was undertaken on amino silanized waveguide surfaces in a two-step procedure using glutaraldehyde. Within the immobilized antibody (Ab) based immunosensor the signal measured was proportional to the trifluralin content in the samples, but the method allowed detection of trifluralin only above 100 ng ml⁻¹ due to the small molecular size of the antigen (Ag). In the immobilized antigen based immunosensor, a trifluralin-bovine serum albumin (BSA) conjugate was covalently linked to the waveguide surface. During measurements the standard solutions and samples were mixed in 1:1 ratio with antiserum, containing constant amounts of antibodies. The amount of free antibodies bound to the surface was inversely proportional to the trifluralin content of the solutions measured. The immobilized antigen based method allowed detection of trifluralin in the concentration range of 2×10⁻⁷ to 3×10⁻⁵ ng ml⁻¹. Results of trifluralin determinations were compared to those obtained in parallel enzyme-linked immunosorbent assay (ELISA) tests and in gas chromatorgraphic-mass spectrometric (GC-MS) analyses, and indicated an increase of six orders of magnitude in the limit of detection (LOD).     

蛋白A与联硫基二(琥珀酰亚胺丙酸盐)修饰电化学免疫传感器测定雌二醇(英文)

将抗体结合蛋白A和交联剂联硫基二(琥珀酰亚胺丙酸盐)(DTSP)组成的骨架修饰到电极表面,再将单克隆雌二醇抗体与骨架中的蛋白A相结合,制备出电化学免疫传感器.利用样品雌二醇与辣根过氧化酶所标记的雌二醇同传感器表面抗体的竞争性结合,将该传感器用于测定溶液中样品雌二醇的浓度;利用方波伏安法监测电化学还原辣根过氧化酶催化产生的苯醌分子的电流,以还原电流为纵坐标,以雌二醇浓度为横坐标绘制标准曲线.结果表明,雌二醇浓度在50～1 500ng.L-1范围内与方波伏安还原电流呈良好的线性关系,灵敏度为0.51μA.ng-1.L,检测限为50ng.L-1.所制备的免疫传感器良好的分析性能得益于蛋白A和DTSP所组成的骨架,该骨架能够增加免疫分子组分在电极表面的修饰量,并能够控制抗体在电极上的结合方位,使其抗原结合位点朝向电极外端,减少结合空间阻碍.     

Development of an immunosensor for human ferritin, a nonspecific tumor marker, based on a quartz crystal microbalance

A new human ferritin immunosensor was developed using anti-human ferritin antibodies (Abs) immobilized on the gold disc of a quartz crystal microbalance (QCM). Two kinds of self-assembled monolayers (SAMs) prepared by cystamine-glutaraldehyde and cystamine method were applied to immobilize anti-ferritin monoclonal antibodies (MoAbs) and polyclonal antibodies (PoAbs) on the quartz, respectively. The reusabilities of quartz crystal adopting the SAMs were found to be better than those of the other immobilization methods used. The 10 cycles of measurements could be performed on the gold surface of the same crystal regenerated with a solution of glycine·HC1. This sensor system could be continuously performed for 15 days, the relative frequency shifts (the frequency shifts measured are relative to the response at the first day) were all found to be above 95%. A linear relationship existed between the frequency shifts (Hz) and the log values of human ferritin concentrations in the range from 0.1 to 100 ng/ml in buffer and mouse serum. This human ferritin immunosensor had some advantages: high sensitivity, high specificity, low sample requirement, high reusability, no label and no pretreatment etc.     

A label-free electrochemical immunosensor based on gold nanoparticles for detection of paraoxon

An electrochemical immunosensor for the direct determination of paraoxon has been developed based on the biocomposites of gold nanoparticles loaded with paraoxon antibodies. The biocomposites are immobilized on the glassy carbon electrode (GCE) using Nafion membrane. On the immunosensor prepared paraoxon shows well-shaped CV with reduction and oxidation peaks located −0.08 and −0.03 mV versus SCE, respectively. The detection of paraoxon performed at −0.03 mV is beneficial for guaranteeing sufficient selectivity. The amount of the biocomposite consisting gold nanoparticles loaded with antibodies and the volume of Nafion solution used for fabricating the immunosensor have been studied to ensure sensitivity and conductivity of the immunosensor. The immunosensor has been employed for monitoring the concentrations of paraoxon in aqueous samples up to 1920 μg l⁻¹ with a detection limit of 12 μg l⁻¹.     

Immunosensor for the determination of <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> using a tyrosinase–mercaptopropionic acid modified electrode as an amperometric transducer

An amperometric immunosensor for the quantification of Staphylococcus aureus based on the coimmobilization of rabbit immunoglobulin G (RbIgG) and tyrosinase on a mercaptopropionic acid self-assembled monolayer modified gold electrode is reported. A competitive mode in which protein-A-bearing S. aureus cells and antiRbIgG labeled with alkaline phosphatase (AP) compete for the binding sites of immobilized RbIgG was used. Monitoring of the affinity reaction was carried out by the amperometric detection at -0.15 V of phenol generated in the enzyme reaction with AP, at the tyrosinase-modified electrode through the electrochemical reduction of the o-quinone formed. Optimization of the working variables, such as the immunosensor composition and incubation times, the applied potential, the working pH and the concentration of phenyl phosphate used as the AP substrate, was carried out. Under the optimized conditions, both the repeatability of the measurements and the reproducibility of the responses obtained with different immunosensors yielded relative standard deviation values for the steady-state current lower than 10%. The immunosensor showed a dynamic range from 4.4x10(5) to 1.8x10(7) S. aureus cells mL(-1), with a detection limit of 1.7x10(5) cells mL(-1). The limit of detection was remarkably improved by subjecting S. aureus cells to wall lysis by heat treatment. The value obtained was 2.3x10(3) cells mL(-1), which is adequate for the monitoring of S. aureus contamination levels in some foodstuffs. As an application, milk samples spiked with bacteria at the 4.8x10(3) cells mL(-1) level were analyzed.