Stable vesicles composed of monocarboxylic or dicarboxylic fatty acids and trimethylammonium amphiphiles

The self-assembly of cationic and anionic amphiphile mixtures into vesicles in aqueous media was studied using two different systems: (i) decanoic acid and trimethyldecylammonium bromide and (ii) hexadecanedioic acid (a simple bola-amphiphile) and trimethyldecylammonium bromide. The resulting vesicles with varying amphiphile ratios were characterized using parameters such as the critical vesicle concentration, pH sensitivity, and encapsulation efficiency. We also produced and observed giant vesicles from these mixtures using the electroformation method and confocal microscopy. The mixed catanionic vesicles were shown to be more stable than those formed by pure fatty acids. Those containing bola-amphiphile even showed the encapsulation of a small hydrophilic solute (8-hydroxypyrene-1,3,6-trisulfonic-acid), suggesting a denser packing of the amphiphiles. Compression and kinetics analysis of monolayers composed of these amphiphiles mixtures at the air/water interface suggests that the stabilization of the structures can be attributed to two main interactions between headgroups, predominantly the formation of hydrogen bonds between protonated and deprotonated acids and the additional electrostatic interactions between ammonium and acid headgroups.     

Langmuir monolayer behavior of an ion pair amphiphile with a double-tailed cationic surfactant

The spread or Langmuir monolayer behavior of an ion pair amphiphile (IPA), hexadecyltrimethylammonium-dodecylsulfate (HTMA-DS), with a double-tailed cationic surfactant, dihexadecyldimethylammonium bromide (DHDAB), at the air/water interface was analyzed with surface pressure-area isotherms, area relaxation curves, and Brewster angle microscope (BAM) images. The surface pressure-area isotherms showed that with increasing the DHDAB molar ratio, X(DHDAB), spread monolayers of HTMA-DS with DHDAB became rigid. In addition, unreasonably small limiting areas per alkyl chain of the molecules in the monolayers were found, especially at X(DHDAB)=0.5, implying the molecular loss from the monolayers at the interface. For spread HTMA-DS/DHDAB monolayers at the interface, a new IPA, DHDA-DS, was proposed to form through the displacement of HTMA(+) from HTMA-DS by DHDA(+), leaving HTMA(+) dissociated. The formation of DHDA-DS and the desorption of dissociated HTMA(+) upon the interface compression were supported by the results obtained from designed monolayer experiments with BAM observations, and were discussed by considering the hydrophilicity, packing efficiency, and headgroup charge characteristic of the species. Moreover, the area relaxation curves of spread HTMA-DS/DHDAB monolayers suggested that the formation of DHDA-DS was strongly related to the improved monolayer stability at the interface, which may have implications for the DHDAB-enhanced physical stability of catanionic vesicles composed of HTMA-DS.     

Influence of ammonium nitrate in phase transitions of Langmuir and Langmuir-Blodgett films at air/solution and solid/solution interfaces

The effect of ammonium nitrate on the phase transitions in Langmuir films of amphiphiles-stearic acid, stearyl amine (STAM), stearyl alcohol, dihexadecylphosphate, and the quarternized ammonium salt dioctadecyldimethylammonium bromide have been studied at air/water interface and in local ordering of their Langmuir-Blodgett films (LB films). The study shows that except for the stearyl amine (STAM) all other monolayers exhibit a liquid-expanded to liquid-condensed transition with slight expansion in area in the presence of ammonium nitrate. STAM monolayers show a new phase transition, which possibly arises due to the differently ionized amino groups, and change in solvation sheath due to an ion-dipole type interaction between the amino groups and the ammonium ion in the subphase. Mixed films of the amine with the acid and alcohol did not show such intermediate phases indicating that competing H-bonds between polar groups themselves and dipolar couplings between the polar groups and ammonium nitrate play a major role in the organization of the molecules at the interface. The above effect resulting in a change in the local order is borne out by Brewster angle micrographs (BAM) of the Langmuir films of STAM at air/solution interface. Such behavior is also seen at solid/liquid interfaces where the polar component of surface energy undergoes a drastic change for the amine films transferred onto solid substrates from the air/ammonium nitrate solution interface.     

Formation of complex Langmuir and Langmuir-Blodgett films of water soluble rosebengal

This communication reports the formation of complex Langmuir monolayer at the air-water interface by charge transfer types of interaction with the water soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules doped with rosebengal (RB), with the stearic acid (SA) molecules of a preformed SA Langmuir monolayer. The reaction kinetics of the formation of RB-CTAB-SA complex monolayer was monitored by observing the increase in surface pressure with time while the barrier was kept fixed. Completion of interaction kinetics was confirmed by FTIR study. This complex Langmuir films at the air-water interface was transferred onto solid substrates at a desired surface pressure to form multilayered Langmuir-Blodgett films. Spectroscopic characterizations reveal some molecular level interactions as well as formation of microcrystalline aggregates depending upon the molar ratios of CTAB and RB within the complex LB films. Presence of two types of species in the complex LB films was confirmed by fluorescence spectroscopy.     

Vesicle formation between single-chained cationic surfactant and plasmid DNA and its application in cell transfection

In the present study, we found that plasmid DNA could induce single-chained cationic surfactants cetyltrimethylammonium bromide (CTAB), dodecyltrimethylammonium bromide (DTAB), and dodecyltriethyl ammonium bromide (DEAB) to form vesicles once its concentration reached a critical value. Moreover, the gene for follicle-stimulating hormone was delivered into cells with these single-chained cationic surfactant/DNA vesicles and the transfection efficiency was comparable to that with lipofectamine? 2000, a famous and widely used commercial transfection reagent, and also to that using electroporation method, although it was generally thought conventional single-chained cationic surfactant was not suitable for gene transfer. The conventional single-chained cationic surfactant is very cheap and stable and the vesicles are very easy to be prepared. Thereby, this study may suggest that the vesicles formed between plasmid DNA and surfactant should be prospective to transfer DNA.     

Formation of complex films with water-soluble CTAB molecules

This communication reports the formation of complex Langmuir monolayer at the air-water interface with the water-soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules when interacted with the stearic acid (SA) molecules. The reaction kinetics of the formation of the CTAB-SA complex was monitored by observing the surface pressure versus time graph. Multilayered LB films of this complex doped with Congo red was successfully formed onto a quartz substrate. UV-Vis absorption and steady-state fluorescence spectroscopic characteristics of this doped LB films confirms the successful incorporation of Congo red molecules in to the CTAB-SA complex films.     

Adsorption of poly(N‐ethyl‐4‐vinyl pyridinium bromide) onto langmuir‐blodgett films built up from amphiphilic polymers

The interaction of a strong cationic polyelectrolyte, poly(N‐ethyl‐4‐vinyl pyridinium bromide), with Langmuir‐Blodgett (LB) films built up from four monolayers of amphiphilic derivatives of the alternating copolymers of maleic acid and alkenes (one of the monolayers was formed by the amphiphilic copolymer containing pyrenyl groups as fluorescent labels) was examined. Transformations of absorbance spectra and quenching of fluorescence of the LB films were detected after their contact with aqueous solutions of the cationic polyelectrolyte. These changes were attributed to the adsorption of poly(N‐ethyl‐4‐vinyl pyridinium bromide) onto such films. The efficiency of this process was found to be rather sensitive to the variations in pH of the surrounding medium: adsorption of the cationic polyelectrolyte onto the LB films was pronounced in basic media while it became rather weak in acidic media.     

Simultaneous analysis of oxidized and reduced glutathione in cell extracts by capillary zone electrophoresis

Glutathione (GSH) and glutathione disulfide (GSSG) levels in cells constitute a thiol redox system. They can be used as an indicator of oxidative stress of the cell. In this study, a capillary zone electrophoresis (CZE) method is described that enables quantitation of GSH and GSSG from cellular extracts. The CZE buffer used was 20 mM ammonium acetate containing 5% (v/v) acetic acid at pH 3.1 in conjunction with a polybrene coated capillary operated in reverse polarity mode. Effects of different acids used to prepare cell samples were investigated on CZE performance. The acids include meta phosphoric acid (MPA), trichloroacetic acid (TCA), phosphoric acid (PA) and sulfosalicylic acid (SSA) and are used to stabilize GSH and GSSG before performing CZE analysis. The method features a limit of detection of 4 microM and a limit of quantitation of 12 microM for both GSSG and GSH and recoveries of 94% for GSH and 100% for GSSG. Quantitative analysis of GSSG and GSH in HaCaT cell extracts (5% SSA, w/v) was performed with this method and changes in the ratio of GSH to GSSG in N-ethylmaleimide treated cell sample was observed by comparing with control cell samples.     

Interaction of small amounts of bovine serum albumin with phospholipid monolayers investigated by surface pressure and atomic force microscopy

The influence of small amounts of bovine serum albumin (BSA) (nM concentration) on the lateral organization of phospholipid monolayers at the air-water interface and transferred onto solid substrates as one-layer Langmuir-Blodgett (LB) films was investigated. The kinetics of adsorption of BSA onto the phospholipid monolayers was monitored with surface pressure isotherms in a Langmuir trough, for the zwitterionic dipalmitoylphosphatidyl ethanolamine (N,N-dimethyl-PE) and the anionic dimyristoylphosphatidic acid (DMPA). A monolayer of N,N-dimethyl-PE or DMPA incorporating BSA was transferred onto a solid substrate using the Langmuir-Blodgett technique. Atomic force microscopy (AFM) images of one-layer LB films displayed protein-phospholipid domains, whose morphology was characterized using dynamic scaling theories to calculate roughness exponents. For DMPA-BSA films the surface is characteristic of self-affine fractals, which may be described with the Kardar-Parisi-Zhang (KPZ) equation. On the other hand, for N,N-dimethyl-PE-BSA films, the results indicate a relatively flat surface within the globule. The height profile and the number and size of globules varied with the type of phospholipid. The overall results, from kinetics of adsorption on Langmuir monolayers and surface morphology in LB films, could be interpreted in terms of the higher affinity of BSA to the anionic DMPA than to the zwitterionic N,N-dimethyl-PE. Furthermore, the effects from such small amounts of BSA in the monolayer point to a cooperative response of DMPA and N,N-dimethyl-PE monolayers to the protein.     

Balancing conformational and oxidative kinetic traps during the folding of bovine pancreatic trypsin inhibitor (BPTI) with glutathione and glutathione disulfide

The oxidative folding of bovine pancreatic trypsin inhibitor (BPTI) has served as a paradigm for the folding of disulfide-containing proteins from their reduced form, as well as for protein folding in general. Many extracellular proteins and most pharmaceutically important proteins contain disulfide bonds. Under traditional conditions, 0.125 mM glutathione disulfide (GSSG) and no glutathione (GSH), the folding pathway of BPTI proceeds through a nonproductive route via N* (a two disulfide intermediate), or a productive route via N' (and other two disulfide intermediates which are in rapid equilibrium with N'). Both routes have the rearrangement of disulfide bonds as their rate-determining steps. However, the effects of the composition of the redox buffer, GSSG and GSH, on folding has not been extensively investigated. Interestingly, BPTI folds more efficiently in the presence of 5 mM GSSG and 5 mM GSH than it does under traditional conditions. These conditions, which are similar to those found in vivo, result in a doubly mixed disulfide between N' and glutathione, which acts as an oxidative kinetic trap as it has no free thiols. However, with 5 mM GSSG and 5 mM GSH the formation of the double mixed disulfide is compensated for by N* being less kinetically stable and the more rapid conversion of the singly mixed disulfides between N' and glutathione to native protein (N). Thus a major rate-determining step becomes the direct conversion of a singly mixed disulfide to N, a growth-type pathway. Balancing the formation of N* and its stability versus the formation of the doubly mixed disulfide and its stability results in more efficient folding. Such balancing acts may prove to be general for other disulfide-containing proteins.     

Preparation of microscopic and planar oil-water interfaces that are decorated with prescribed densities of insoluble amphiphiles

Langmuir monolayers (monolayers of insoluble molecules formed at the surface of water), and associated Langmuir-Blodgett/Schaefer monolayers prepared by transfer of Langmuir films to the surfaces of solids, are widely used in studies aimed at understanding the physicochemical properties of biological and synthetic molecules at interfaces. In this article, we report a general and facile procedure that permits transfer of Langmuir monolayers from the surface of water onto microscopic and planar interfaces between oil and aqueous phases. In these experiments, a metallic grid supported on a hydrophobic solid is used to form oil films with thicknesses of 20 mum and interfacial areas of 280 mum x 280 mum. Passage of the supported oil films through a Langmuir monolayer is shown to lead to quantitative transfer of insoluble amphiphiles onto the oil-water interfaces. The amphiphile-decorated oil-water interfaces hosted within the metallic grids (i) are approximately planar, (ii) are sufficiently robust mechanically so as to permit further characterization of the interfaces outside of the Langmuir trough, (iii) can be prepared with prescribed and well-defined densities of amphiphiles, and (iv) require only approximately 200 nL of oil to prepare. The utility of this method is illustrated for the case of the liquid crystalline oil 4-pentyl-4'-cyanobiphenyl (5CB). Transfer of monolayers of either dilauroyl- or dipalmitoylphosphatidylcholine (DLPC and DPPC, respectively) to the nematic 5CB-aqueous interface is demonstrated by epifluorescence imaging of fluorescently labeled lipid and polarized light imaging of the orientational order within the thin film of nematic 5CB. Interfaces prepared in this manner are used to reveal key differences between the density-dependent phase properties of DLPC and DPPC monolayers formed at air-water as compared to that of nematic 5CB-aqueous interfaces. The methodology described in this article should be broadly useful in advancing studies of the interfacial behavior of synthetic and biological molecules at liquid-liquid interfaces.     

Labeling of DNA via rearrangement of S-2-aminoethyl phosphorothioates to N-(2-mercaptoethyl)phosphoramidates

The reaction of phosphorothioates in DNA with 2-bromoethylammonium bromide results in S-2-aminoethyl phosphorothioates, which can rearrange to N-(2-mercaptoethyl)phosphoramidates providing a facile method for the generation of site-specific thiol labeling of DNA sequences. The applicability of this method was demonstrated by conjugation of the thiolated DNA sequence with Na-(3-maleimidylpropionyl) biocytin and Alexa Fluor 546 C5-maleimide.     

Interaction of cationic lipid vesicles with model cell membranes--as determined by neutron reflectivity

Transfection of cells by DNA (for the purposes of gene therapy) can be effectively engineered through the use of cationic lipid/DNA "lipoplexes", although the transfection efficiency of these lipoplexes is sensitive to the neutral "helper" lipid included. Here, neutron reflectivity has been used to investigate the role of the helper lipid present during the interaction of cationic lipid vesicles with model cell membranes. Dimethyldioctadecylammonium bromide (DDAB) vesicles were formed with two different helper lipids, 1,2-dioleoyl-sn-glycero-3-phosphatidylethanolamine (DOPE) and cholesterol, and the interaction of these vesicles with a supported phospholipid bilayer was determined. DOPE-containing vesicles were found to interact faster with the membrane than those containing cholesterol, and vesicles containing either of the neutral helper lipids were found to interact faster than when DDAB alone was present. The interaction between the vesicles and the membrane was characterized by an exchange of lipid between the membrane and the lipid aggregates in solution; the deposition of vesicle bilayers on the surface of the membrane was not apparent.     

Polymerization of a cysteinyl peptidolipid Langmuir film

The surface pressure-area isotherm of a cysteinyl peptidolipid on a pure water subphase (pH 5.8) was compared with that on a water subphase saturated with oxygen and buffered with ammonium bicarbonate (pH 7.8). A reduction of the limiting molecular area was observed for the isotherm measured on the subphase saturated with oxygen. Hysteresis in the compression-decompression cycles of the Langmuir film was also observed. Taking into consideration the chemical structure of the peptidolipid, we rationalized that the free sulfhydryl groups of the peptidolipid were oxidized in the presence of oxygen in the alkaline subphase to form intermolecular disulfide bonds at the air-water interface. The surface topography of the peptidolipid Langmuir film was observed by epi-fluorescence microscopy and the Langmuir-Blodgett film by environmental scanning electron microscopy (ESEM). The micrographs showed evidence of the polymerization of the cysteinyl peptidolipid at the air-water interface. Furthermore, the XPS spectra of the Langmuir-Blodgett films also proved the existence of disulfide bonds. The control peptidolipid C(18)-Ser-Gly-Ser-OH showed identical surface pressure-area isotherms in the presence or absence of an oxygen-saturated subphase.     

Adsorption of DNA into mesoporous silica

In these experiments, double-stranded, linear DNA sequences were adsorbed into the pores of spherically shaped acid-prepared mesoporous silica (APMS). The lengths of the sequences were either 760 base pairs or 2000 base pairs. DNA adsorption into the interior of the mesoporous material was confirmed using confocal microscopy of sequences containing fluorescently labeled DNA molecules. Additional characterization with N(2) physisorption and powder X-ray diffraction supported this finding. The extent of adsorption was measured at various concentrations using UV-visible spectrophotometry to establish adsorption isotherms. APMS alone adsorbed a negligible amount of DNA; however, exchanging divalent cations such as Mg(2+) and Ca(2+) into the pores of APMS prior to DNA uptake was found to cause a significant amount of DNA to be adsorbed. Using Na(+) caused a lower amount of DNA to be adsorbed. DNA adsorption was also dependent on the pore diameter of APMS. Adsorption increased upon expansion of the pore size of the metal ion-exchanged material from 34 to 54 A; however, no additional uptake was measured by further increasing the pore size to 100 A. The amount of DNA adsorbed could also be significantly increased by using (aminopropyl)triethoxysilane to covalently link ammonium ions to the surface. Postsynthetic modification of the silica surface with aminopropyl groups increased the maximum DNA adsorption to 15.7 microg/mg silica, for materials with pore diameters of 100 A, which is 2 to 3 times more adsorbed DNA than for metal ion-exchanged material. This indicated that DNA binds more strongly in the presence of the ammonium group compared to the metal counterions. Finally, calculation and comparison of Freundlich and Langmuir constants for these adsorption processes indicate that intermolecular interactions between the DNA molecules within the pores are significant when the effective pore diameter is small, including materials with larger pores that were modified with organosilane.     

Self-Assembly and Liquid Crystalline Properties of Ionic Polymers and Their Nonionic Family

Langmuir-Blodgett (LB) monolayers with an extremely dense azobenzene moiety in a unit area, were prepared using a series of ionic liquid crystalline polymers (ILCPs) and their nonionic family (NLCPs). The isober curves and the compression-expansion isotherms of the ILCPs and NLCPs on water showed that the polymer Langmuir monolayers have good quality. The molecular organization of these polymers on the water surface depended on the length of spacer alkyl chains and the existence of ammonium salts. Low-molecular-weight liquid crystals between the LCP monolayer dipped glass substrates showed a homeotropic alignment.     

Influence of surfactant molecular structure on two-dimensional surfactant-DNA complexes: Langmuir balance study

In this paper, we used two simplified methods to understand the influence of surfactant molecular structure on the properties of surfactant-DNA complexes. First, we selected Langmuir balance technique, a two-dimensional (2D) method, which allows complex formation under equilibrium-like conditions, avoiding some of the inherent problems involved in solution. Secondly, two series of simple quaternary ammonium surfactants were used. The cationic surfactant-DNA complex monolayers were formed at the air-water interface through the electrostatic interaction between the ammonium groups of the surfactants and the phosphate groups of DNA at the air-water interface. Combining the results of pi-A isotherms, pi-t isotherms, and atomic force microscopy (AFM) measurements, it was found that the surfactant molecular structures affect the surface properties and morphologies of 2D surfactant-DNA complexes. We expect that the study of the properties of 2D surfactant-DNA complexes will help us to understand the physicochemical properties of surfactant-DNA complexes, which are important for gene delivery.     

Comparative Behavior of Aromatic Disulfide and Diselenide Monolayers on Polycrystalline Gold Films Using Cyclic Voltammetry, STM, and Quartz Crystal Microbalance

A comparative investigation of the self-assembled monolayers of diphenyl disulfide (DDS), diphenyl diselenide (DDSe), and naphthalene disulfide (NDS) on polycrystalline gold films using STM, QCM, and electrochemical techniques is presented. The geometric constraint imposed by the rigid naphthalene ring for NDS inhibits the cleavage of the S-S bond, thus adversely affecting the monolayer organization and stability relative to the monolayers formed with DDS and DDSe. A comparative analysis using techniques like cyclic voltammetry and quartz-crystal microbalance indicates that, for DDS, the facile cleavage of the S-S bond leads to strong binding of the adsorbate molecules at the preferred surface sites, resulting in a rather well-organized self-assembled structure. The STM pattern of NDS reveals a periodic domain (i.e., less than 10 nm in size) while no such small domains are seen in the case of DDS and DDSe due to the orientational flexibility of the rings. Copyright 2001 Academic Press.     

Effects of micelle-to-vesicle transitions on the degree of counterion binding

Effects of micelle-to-vesicle transitions on the degree of counterion binding (beta) were investigated on three systems. For the concentration-dependent micelle-to-vesicle transition in the didodecyldimethylammonium bromide (DDAB)/water system, in the region of coexistent micelles and vesicles, less than 3 mM, the beta values increased significantly with DDAB concentration: beta (0.07 mM)=0.35 and beta (3 mM)=0.93. In the coexistent region, activities of the bromide ion, a(Br), were almost independent of the DDAB concentration, suggesting the pseudo-phase nature of both micelles and vesicles. In the concentration-dependent vesicle-to-lamellar transition region above 5 mM, where multilamellar vesicles were prevailing, on the other hand, the beta values were only little affected by this transition. This suggests that the increase in the layer number of DDAB multilamellar vesicles scarcely affects the beta values. This was also supported by the fact that the destruction of multilamellar vesicles by ultrasonication did not change the beta values. These results strongly suggest that the inner and outer monolayers of DDAB multilamellar vesicles are characterized by similar beta values. The second system, cetyltrimethylammonium bromide (CTAB)/DDAB mixtures, showed composition-dependent transitions depending on the mole fraction of DDAB X(DDAB): spherical micelles (0rodlike micelles (0.2vesicles (0.6相似文献   

Dynamic interaction between oppositely charged vesicles: aggregation, lipid mixing, and disaggregation

We investigated dynamic interactions between oppositely charged small unilamellar vesicles using positively charged vesicles containing 1,2-dioleoyl-3-trimethylammonium-propane or 3beta-[N-(N('),N(')-dimethylaminoethane)-carbamoyl] cholesterol and negatively charged vesicles containing L-alpha-phosphatidyl-DL-glycerol. Aggregation, lipid bilayer mixing, contents mixing and contents leakage were systematically examined using optical density measurements, fluorescence resonance energy transfer assays, fluorescence quenching assays, light-scattering analyses, and freeze-fracture transmission electron microscopy. The oppositely charged vesicles aggregated immediately. Lipid mixing was observed, but there was no mixing of the contents. The vesicle aggregates disaggregated spontaneously after several minutes. The surface potential of the disaggregated vesicles was neutralized. From these results, we infer that the lipids in the external monolayers were exchanged between the oppositely charged vesicles while the internal monolayers remained intact. The two types of cationic lipids used exhibited different speeds of disaggregation.