Synthesis of tunable 3D ZnO architectures assemblied with nanoplates

A simple hydrothermal method has been used to synthesize 3D ZnO architectures without any surfactants. The assemblies were composed of thin nanoplates with the thickness of about 35nm. X‐ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and photoluminescence (PL) characterized the structure, morphology and optical property of products. The thickness of plates and assembly pattern can be controlled by adjusting the experimental parameters. Furthermore, these ZnO nanoplate assemblies exhibited enhanced photocatalytic activity in the degradation of methylene blue (MB). (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and properties of α‐Fe2O3 nanorods

We report synthesis of α‐Fe₂O₃ (hematite) nanorods by reverse micelles method using cetyltrimethyl ammonium bromide (CTAB) as surfactant and calcined at 300 °C. The calcined α‐Fe₂O₃ nanorods were characterized by X‐ray diffraction (XRD), high‐resolution scanning electron microscopy (HRSEM), transmission electron microscopy (TEM), energy dispersive spectrometer (EDS), fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometer (VSM). The result showed that the α‐Fe₂O₃ nanorods were hexagonal structure. The nanorods have diameter of 30‐50 nm and length of 120‐150 nm. The weak ferromagnetic behavior was observed with saturation magnetization = 0.6 emu/g, coercive force = 25 Oe and remanant magnetization = 0.03 emu/g. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Well‐defined Sb2S3 nanostructures: citric acid‐assisted synthesis,electrochemical hydrogen storage properties

Well‐defined (three‐dimensional) 3‐D dandelion‐like Sb₂S₃ nanostructures consisted of numerous nanorods have been achieved via a facile citric acid‐assisted solvothermal process. The as‐prepared products were characterized by X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high‐resolution TEM (HRTEM), respectively. The influence factors of the formation of the hierarchical Sb₂S₃ nanostructures are discussed in details based on FESEM characterizations. By simply controlling the quantity of citric acid, the nucleation and growth process can be readily tuned, which brings the different morphologies and nanostructures of the final products. On the basis of a series of contrastive experiments, the aggregation‐based process and anisotropic growth mechanism are reasonably proposed to understand the formation mechanism of Sb₂S₃ hierarchical architectures with distinctive morphologies including nanorods, and dandelion‐like nanostructures. Charge‐discharge curves of the obtained Sb₂S₃ nanostructures were measured to investigate their electrochemical hydrogen storage behaviors. It revealed that the morphology played a key role on the hydrogen storage capacity of Sb₂S₃ nanostructure. The dandelion‐like Sb₂S₃ nanostructures exhibited higher hydrogen storage capacity (108 mAh g⁻¹) than that of Sb₂S₃ nanorods (95 mAh g⁻¹) at room temperature.     

Capsule‐like α‐Fe2O3 nanoparticles: Synthesis,characterization, and growth mechanism

Uniform capsule‐like α‐Fe₂O₃ particles were synthesized via a simple hydrothermal method, employing FeCl₃ and CH₃COONa as the precursors and sodium dodecyl sulfate (SDS) as soft template. X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), and high‐resolution transmission electron microscopy were used to characterize the structure of synthesized products. Some factors influencing the formation of capsule‐like α‐Fe₂O₃ particles were systematically investigated, including different kinds of surfactants, the concentration of SDS, and reaction times. The investigation on the evolution formation reveals that SDS was critical to control the morphology of final products, and a possible five‐step growth mechanism was presented by tracking the structures of the products at different reaction stages.     

α‐Fe2O3 nanospindles loaded with ZnO nanocrystals: Synthesis and improved gas sensing performance

ZnO/α‐Fe₂O₃ nanocomposites were fabricated through a two‐step hydrothermal method. The morphology and composition of the as‐synthesized products were characterized by X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray spectroscopy (EDS), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The gas sensing properties of the fabricated products were investigated towards ethanol, acetone, propanol, isopropanol, formaldehyde, chloroform and so on. The results demonstrated that the ZnO/α‐Fe₂O₃ nanocomposites exhibited excellent sensing properties and showed remarkably higher sensing responses and much lower optimum operating temperature compared to individual ZnO and α‐Fe₂O₃. In addition, the ZnO/α‐Fe₂O₃ nanocomposites have some selectivity for ethanol, propanol and isopropanol. The possible gas sensing mechanism was also proposed. Our studies demonstrate that our fabricated materials could be widely used in the future.     

Growth Habit and Habit Variation of γ‐CuI Crystallites under Hydrothermal Conditions

The octahedra were observed in the γ CuI crystallites synthesized by hydrothermal method using 1.6g (C₂H₅OO)₂Cu and 2.66g KI as precursors at 200 °C for 12 hours in the de‐ionized water. The effect of additives on the morphology of γ‐CuI crystallites was investigated. Results show that the morphology of γ‐CuI crystallites prepared in the mixed solution of de‐ionized water and alcohol at 200 °C for 12 hours is the tetrahedron. In order to disclose the effect of the additive on the growth habit of γ‐CuI crystallites, the microcosmic growth mechanism of γ‐CuI crystal is investigated from the complex of I^‐ and Cu⁺ ions to each other. It is concluded that the effect of alcohol on the morphology of γ‐CuI crystallites is carried out through changing the relative rate of complex of anion and cation to each other at the interface. Based on the above analysis, the growth habit of γ‐CuI crystallites and the habit variation under hydrothermal conditions are explained reasonably.     

Optical,photocatalytic properties of novel CuS nanoplate‐based architectures synthesised by a solvothermal route

CuS architectures were successfully prepared by a simple solvothermal route without any surfactant, in which copper nitrate trihydrate and element sulfur were used as reactants. The products were characterized by X‐ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. The optical properties of CuS architectres were investigated by Raman spectrometer, ultraviolet‐visible spectroscopy, and fluorescence spectrophotometer. The results showed that the CuS architectures were hexagonal‐structured phase and composed of intersectional nanoplates. UV‐Vis absorption peaks of CuS architectures showed large blue shifts and PL spectrum exhibited a strong blue emission and a weak green emission. Photocatalytic activity of the CuS architectures was evaluated by measuring the decomposition rate of methylene blue solution under solar light. The CuS architectures show good photocatalytic activity. The effects of the molar ratio of Cu:S and the growth time on the synthesis of CuS crystalline were discussed and the growth mechanism of CuS nanoplate‐based architectures was also proposed. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Facile morphology‐controlled hydrothermal synthesis of flower‐like self‐organized ZnO architectures

Flower‐like self‐organized crystalline ZnO architectures were obtained through a facile and controlled hydrothermal process. As‐synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), X‐ray diffraction (XRD), electron diffraction and UV‐Vis spectroscopy. XRD and electron diffraction results confirmed the obtained materials are pure wurtzite ZnO. The effects of different ratios of starting materials and solvent on the morphologies of ZnO hydrothermal products were also evaluated by SEM observations. It is suggested that the use of water, rather than ethanol as the solvent, as well as employing a precursor of Zn(Ac)₂ and 2NaOH (v/v) in hydrothermal reactions are responsible for the generation of specific flower‐like self‐assembled ZnO structures. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Recharging processes of Cr ions in Mg2SiO4 and Y3Al5O12 crystals under influence of annealing and γ ‐ irradiation

Recharging processes of chromium ions were investigated for Mg₂SiO₄:Mg, Cr single crystals using annealing in O₂ and in air and γ‐irradiation, as compare to YAG :Ca, Cr single crystals. The formation of tetravalent Cr ions in the Mg₂SiO₄ :Mg, Cr is related not only to the initial Cr content in the melt, oxygen partial pressure and O₂‐ vacancy existing in the crystal, but also to the external field such as γ‐irradiation. The additional absorption after γ‐irradiation shows the decrease in intensity of the absorption of Cr³⁺ and Cr⁴⁺ ions in some part of the spectrum and increase in the other giving evidence on recharging effects between Cr³⁺ and Cr⁴⁺. There arises also color centers observed between 380 nm and 570 nm that may participate in energy transfer of any excitation to Cr⁴⁺ giving rise to Cr⁴⁺ emission. Opposite to forsterite crystal, absorption spectrum of YAG:Ca, Cr crystal after γ‐irradiation reveals only increase in the absorption of the Cr bands. The observed behavior of the absorption spectrum of YAG:Ca, Cr crystal under influence of γ‐irradiation suggests that γ‐irradiation ionizes only Cr ions. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

XRD,thermal, FTIR and SEM studies on gel grown γ‐glycine crystals

Glycine is the smallest among amino acids. The polymorphs, α‐ and γ‐forms of glycine were crystallized in silica gel by reduction of solubility method. The grown crystals were characterized by single crystal X‐ray diffraction studies and density determination. Fourier transform infrared spectroscopic studies and thermogravimetric analysis of γ‐glycine were also conducted. Morphological and scanning electron microscopic (SEM) studies were also made and compared with the crystal packing. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal growth,optical, mechanical and electrical properties of organic NLO material γ‐glycine

Single crystals of organic non‐linear optical material, γ‐glycine have been grown by gel method for the first time. The γ‐phase is confirmed by single crystal XRD. The presence of various functional groups of γ‐glycine are confirmed by FTIR. The UV‐Vis‐NIR spectrum reveals the high percentage of transmission of the sample in the entire visible region. The SHG of γ‐glycine is confirmed by Kurtz powder technique. TGA‐DTA studies indicate that the crystal is structurally stable upto 170 °C. Microhardness investigations are conducted on the grown crystals. The dielectric constant measurements are carried out and the nature of variation of dielectric constant ε′ and dielectric loss D in the frequency range of 50 Hz to 5 MHz is studied and reported. Photoconductivity studies of γ‐glycine crystals revealed the negative photoconducting nature. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of γ‐irradiation on spectral properties of undoped Y2SiO5 crystals

The absorption spectra of undoped Y₂SiO₅ crystals were studied before and after γ‐irradiation. After γ‐irradiation, the additional absorption peaks at 260‐270 and 320nm were observed in as‐grown and H₂‐annealed Y₂SiO₅ crystal, but it did not occur in air‐annealed Y₂SiO₅ crystal. These absorption peaks were attributed to F color centers and O^– hole centers, respectively. Owing to more oxygen vacancies and color centers in H₂‐annealed Y₂SiO₅ crystal than that in as‐grown Y₂SiO₅ crystal after γ‐irradiation, the additional absorption peaks were more intense in the former than that in the latter. With the irradiation dose increasing from 20 to 220kGy, the intensity of additional absorption peaks increased. © 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim     

Rapid synthesis of dendrite‐ and platelet‐like α‐Fe2O3 via a hydrothermal oxidation route

Dendrite and platelet‐like α‐Fe₂O₃ microcrystals were synthesized by the oxidation reaction of K₄Fe(CN)₆and NaClO₃ through a simple hydrothermal method. The structures and morphologies of the as‐prepared samples were characterized in detail by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The experiment results show that NaOH played an important role in controlling the morphology of the final products. The possible mechanism was discussed to elucidate the formation of different morphologies of the α‐Fe₂O₃ microstructures. Besides, the magnetic property of the dendrite α‐Fe₂O₃ microstructure was characterized by a vibrating sample magnetometer (VSM). (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Surfactant directed synthesis of mesoporous alumina and α‐alumina single crystal

Mesoporous Al₂O₃ were positively synthesized via treatment of the freshly precipitated amorphous alumina gel using aluminium sulphate as aluminium source, and sodium dodecyl sulphate (SDS) as structure‐directing agent (SDAs). The microstructures, morphologies and textural properties of the as‐prepared materials were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and thermo gravimetric analysis (TG‐DTA). The calcined product at 600 °C was highly porous in nature having a BET surface area of 42 m²/g. These porous Al₂O₃ exhibits excellent adsorption performance for Congo red and the corresponding decolourisation efficiencies reached 99% in just 15 min at 27 °C. The subsequent calcined product at 1200 °C is the alpha alumina single crystal hexagonal platelets with rhombohedral crystallization.     

Synthesis of spindle‐shaped α‐FeOOH and α‐Fe2O3 nanocrystals

Spindle‐shaped α‐FeOOH nanocrystals were facilely synthesized using a poly (vinyl pyrrolidone) (PVP)‐assisted route under hydrothermal conditions. The chemical compositions and morphol‐ogies of the as‐prepared samples were characterized in detail by X‐ray power diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The experimental results reveal that these spindle‐shaped α‐FeOOH nanocrystals have self‐organized into assemblies with hierarchical nanostructures. The crucial roles of PVP in the hydrothermal synthesis of hierarchical α‐FeOOH nanostructures were discussed. The possible formation mechanism was also suggested. Moreover, the spindle‐shaped α‐Fe₂O₃ nanocrystals could be easily obtained after calcining the α‐FeOOH prepared by the PVP‐assisted hydrothermal process. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of strontium chloride on the optical and mechanical properties of γ–glycine crystals

Single crystals of γ‐glycine have been grown from aqueous solution in the presence of small amount of strontium chloride. Single crystal X‐Ray diffraction analysis was used to measure the unit cell parameters and to confirm the crystal structure. The grown crystals have also been subjected to powder X‐Ray diffraction study to identify the crystalline nature. The presence of all the functional groups of the γ‐glycine has been confirmed by Fourier Transform Infrared (FTIR) spectral analysis. The presence of hydrogen and carbon in the glycine molecules was confirmed by using proton and carbon nuclear magnetic resonance (NMR) spectral analyses. Optical behavior of the crystal was studied using UV – Visible absorbance spectroscopy and second harmonic generation (SHG) studies. The SHG efficiency of γ‐glycine is greater than that of standard potassium dihydrogen phosphate (KDP). Mechanical strength of the γ‐glycine crystal has been determined by microhardness studies. Thermal stability of the grown crystal is probed using thermo gravimetric analysis and differential thermal analysis. Laser damage threshold value has been determined using Q‐switched Nd:YAG laser operating at 1064 nm and with 13 ns pulse width in single shot mode. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Solvothermal growth of single‐crystal hexagonal prismatic SrCO3 microrods

Single‐crystal hexagonal prism SrCO₃ microrods have been prepared by a simple solvothermal route. The effects of the reaction time, the content of 1,2‐propanediol and the reactants mass on the products have been investigated, respectively. The as‐synthesized microrods were characterized by X‐ray powder diffraction (XRD), field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM). The results reveal that the products have uniform shape and excellent monodispersity. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of temperature on the microcrystalline structure of thermally evaporated Sb2S3 thin films

Thin films of antimony trisulfide (Sb₂S₃) were prepared by thermal evaporation under vacuum (p=5×10^–5 torr) on glass substrates maintained at various temperatures between 293 K and 523 K. Their microstructural properties have obtained by transmission electron microscopy (TEM). The electron diffraction analysis showed the occurrence of amorphous to polycrystalline transition in the films deposited at higher temperature of substrates (523 K). The polycrystalline thin films were found to have an orthorhombic structure. The interplanar distances and unit‐cell parameters were determined by high‐resolution transmission electron microscopy (HRTEM) and compared with the standard values for Sb₂S₃. The surface morphology of Sb₂S₃ thin films was investigated by scanning electron microscopy (SEM). The optical transmission spectra at normal incidence of Sb₂S₃ thin films have been measured in the spectral range of 400–1400 nm. The analysis of the absorption spectra revealed indirect energy gaps, characterizing of amorphous films, while the polycrystalline films exhibited direct energy gap. From the photon energy dependence of absorption coefficient, the optical band gap energy, E_g, were calculated for each thin films. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and magnetic‐optical properties of Sr3Gd(BO3)3 and Sr3TbxGd1‐x(BO3)3 single crystals

Single crystals of Sr₃Gd(BO₃)₃ (SGB) and Sr₃Tb_xGd_1‐x(BO₃)₃ (TSGB) with dimension Ø 20 mm×20 mm have been grown by Czochralski method. The grown crystals were characterized by X‐ray powder diffraction analysis which showed the crystals belong to hexagonal structure with lattice parameters of a=b=1.254 nm, c=0.926 nm (SGB) and a=b=1.253 nm, c=0.925 nm (TSGB). In TSGB, x=17.7% was obtained by X‐ray fluorometry which showed the segregation coefficient of Tb is closed to 1. The transmission spectrum was measured, which indicated the crystals have high transmittance in 400‐1100 nm region. The Faraday rotation of single crystals at 532 nm wavelength was measured at room temperature. Finally, the Verdet constants were investigated, (SGB) V=17.9 degcm^‐1T^‐1 and (TSGB) V=21.3 degcm^‐1T^‐1. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and characterization of large La1‐xPbxMnO3+δ (x=0.32–0.35) crystals

Large crystals of La_0.63Pb_0.37Mn O_3+δ with small La(Pb)‐ deficiency of about 0.005‐0.01 at.% were grown by high temperature solution growth method. The structure of the grown crystals was determined as rhombohedral with R‐3 space group by single‐crystal X‐ray diffractometry. The surface morphology of the crystals and the exact chemical composition was examined by scanning electron microscopy and energy dispersive X‐ray analysis methods, respectively. The IR‐transmission spectrum reveals the presence of Mn³⁺O₆‐ and Mn⁴⁺O₆‐ octahedra in the lattice of La_0.63Pb_0.37Mn O_3+δ crystals. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)