Optical properties of 2‐aminopyridinium nitrato silver

Crystals of 2‐aminopyridinium nitrato silver have been synthesized by slow evaporation method. Grown crystals have been subjected to FTIR, Single crystal X‐Ray diffraction and UV‐Visible studies in order to investigate the structural and optical properties of the crystal. The FTIR spectrum reveals the presence of the functional group that corresponds to both 2‐aminopyridine and silver nitrate, suggesting the formation of the compound, 2‐aminopyridinium nitrato silver. From XRD it is observed that the crystal crystallizes in the structure of monoclinic with the space group of P2₁/c. The optical transmittance spectrum shows the maximum transparency of about 95% in the visible region is in consistent with the wide band gap, estimated as 4.738 eV. The optical constants n and k has also been determined from the transmittance data. The static dielectric constant is found to be 0.851. The wide band gap and the less dielectric constant suggest the suitability of this compound material for photoconductive applications. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and characterization of 4‐Aminopyridinium‐4‐nitro phenolate single crystals

Organic optical material 4‐Aminopyridinium‐4‐nitro phenolate (4AP4NP) has been synthesized, and single crystals of size 20 x 14 x 6 mm³ have been grown from acetone solvent at room temperature by solvent evaporation technique. The grown crystals have been characterized by X‐ray diffraction to determine the cell parameters, and by FT‐IR technique to confirm the formation of the expected compound. The crystal belongs to monoclinic crystal system with space group P2₁/a.The structural perfection of the grown crystals has been analyzed by high‐resolution X‐ray diffraction (HRXRD) rocking curve measurements. The thermal stability of the compound has been determined by TG‐DTA curves. The transmittance of 4AP4NP has been used to determine the refractive index n; the extinction coefficient K and both the real ε_r and imaginary ε_i components of the dielectric constant as functions of photon energy. The optical band gap of 4AP4NP is 2.4 eV. The dielectric and mechanical behavior of the specimen was also studied. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal structure and characterization of a novel organic optical crystal: 4‐chloro‐3‐nitrobenzophenone

Single crystals of a novel organic material, 4‐Chloro‐3‐Nitrobenzophenone (4C3N) were grown from acetone solution employing the technique of controlled evaporation. 4C3N belongs to the Orthorhombic system, with a = 12.9665(11) Å, b = 7.4388(6) Å, c = 24.336(2) Å, α = β = γ = 90°. FT‐IR study has been performed to identify the functional groups. The transmittance of 4C3N has been used to calculate the refractive index n; the extinction coefficient K and both the real ε_r and imaginary ε_i components of the dielectric constant as functions of photon energy. The optical band gap of 4C3N is 2.7 eV. Thermo gravimetric analysis and differential thermal analysis have also been carried out, and the thermal behavior of 4C3N crystal has been studied. The mechanical properties have been investigated. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical and structural properties of lead iodide thin films prepared by vacuum evaporation method

Thermally processed lead iodide (PbI₂) thin films were prepared by the vacuum evaporation method in a constant ambient. Measured thickness of the film was verified analytically from the optical transmittance data in a wavelength range between 300 and 1600 nm. From the Tauc relation for the non‐direct inter band transition, the optical band gap of the film was found to be 2.58 eV for film thickness 300 nm. X‐ray diffraction analysis confirmed that PbI₂ films are polycrystalline, having hexagonal structure. The low fluctuation in Urbach energy indicates that the grain size is quite small. The present findings are in agreement with the other results. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Determination of optical parameters of Ga0.75In0.25Se layered crystals

The optical properties of the Ga_0.75In_0.25Se crystals have been investigated by means of transmission and reflection measurements in the wavelength range of 380–1100 nm. The analysis of the results performed at room temperature revealed the presence of optical indirect transtions with band gap energy of 1.89 eV. The variation of the band gap energy as a function of temperature was also studied in the temperature range of 10–300 K. The rate of change of band gap energy (γ = –6.2 × 10^–4 eV/K) and absolute zero value of the band gap (E_gi(0) = 2.01 eV) were reported. The wavelength dependence of the refractive index was analyzed using Wemple and DiDomenico, Sellmeier and Cauchy models to find the oscillator energy, dispersion energy, oscillator strength and zero‐frequency refractive index values. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Substrate temperature effect on the optical properties of amorphous Sb2S3 thin films

Sb₂S₃ amorphous thin films were prepared by thermal evaporation of corresponding powder on thoroughly cleaned glass substrates held at temperature in the range 300‐473 K. X‐ray diffraction and atomic force microscopy have been used to order to identify the structure and morphology of surface thin films. The optical constants of the deposition films were obtained from the analysis of the experimental recorded transmission data over the wavelength range 400‐1400 nm. An analysis of the absorption coefficient values revealed an optical indirect transition with the estimation of the corresponding band gap values. It was found that the optical band gap energy decrease with substrate temperature from 1.67 eV at 300 K to 1.48 eV at 473K. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Temperature‐tuned band gap energy and oscillator parameters of Tl2InGaSe4 semiconducting layered single crystals

The optical properties of Tl₂InGaSe₄ layered single crystals have been studied through the transmission and reflection measurements in the wavelength range of 500‐1100 nm. The analysis of room temperature absorption data revealed the presence of both optical indirect and direct transitions with band gap energies of 1.86 and 2.05 eV, respectively. Transmission measurements carried out in the temperature range of 10‐300 K revealed that the rate of change of the indirect band gap with temperature is γ = – 4.4 × 10^‐4 eV/K. The absolute zero value of the band gap energy was obtained as E_gi(0) = 1.95 eV. The dispersion of the refractive index is discussed in terms of the single oscillator model. The refractive index dispersion parameters: oscillator wavelength and strength were found to be 2.53 × 10^–7 m and 9.64 × 10¹³ m^–2, respectively. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical properties of thermally evaporated CdS thin films

CdS thin films of varying thicknesses were deposited on cleaned glass substrates at room temperature by thermal evaporation technique in a vacuum of about 2 x 10^‐5 torr. UV‐VIS spectra of the films were studied using the optical transmittance measurements which were taken in the spectral region from 300 nm to 1100 nm. The absorbance and reflectance spectra of the films in the UV‐VIS region were also studied. Optical constants such as optical band gap, extinction coefficient, refractive index, optical conductivity and complex dielectric constant were evaluated from these spectra. All the films were found to exhibit high transmittance (∼ 60 ‐ 93 %), low absorbance and low reflectance in the visible/near infrared region from ∼ 500 nm to 1100 nm. The optical band gap energy was found to be in the range 2.28 – 2.53 eV. All the films annealed at 300°C for 4 hours in vacuum (∼ 10^‐2 torr) showed a decrease in the optical transmittance with its absorption edge shifted towards the longer wavelength, leading to the result that the optical band gap decreases on annealing the films. Also, on annealing crystallinity of the films improves, resulting in decrease in the optical transmittance. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of substrate temperature on the optical constants of zincphthalocyanine thin films

The influence of the film thickness and substrate temperature on optical constants of the vacuum evaporated ZincPhthalocyanine (ZnPc) thin films have been reported in this paper. The direct and allowed optical band gap energy has been evaluated from the (αhυ)² vs. (hυ) plots. The optical constants such as extinction coefficient (k_f) and refractive index (n) have been evaluated from the transmittance values and the observed results strongly dependent on substrate temperature and film thickness. The low values of the refractive index have been observed for the films prepared at T_s=200°C. The change in crystallanity and phase transformation affect the optical constants and the lower values of the optical constants will leads to the good quality of the ZnPc thin films. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Self‐diffraction and edge enhanced effect in the photorefractive crystal (Ca0.28Ba0.72)0.75(Sr0.60Ba0.40)0.25Nb2O6

The optical properties based on Self‐diffraction phenomena and the edge enhanced of optical correlation pattern effect with a Ca²⁺‐doped (Ca_0.28Ba_0.72)_0.75(Sr_0.60Ba_0.40)_0.25Nb₂O₆ (CSBN₇₅) crystals and a He‐Ne laser at 632.8 nm are studied in this paper. The experimental results show that its practical application as photorefractive material is worth further investigation. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Properties of Sm‐doped CaNb2O6 thin films deposited by radio‐frequency magnetron sputtering

Sm‐doped CaNb₂O₆ (CaNb₂O₆:Sm) phosphor thin films were prepared by radio‐frequency magnetron sputtering on sapphire substrates. The thin films were grown at several growth temperatures and subsequently annealed at 800 °C in air. The crystallinity, surface morphology, optical transmittance, and photoluminescence of the thin films were investigated by X‐ray diffraction, scanning electron microscopy, ultraviolet‐visible spectrophotometry, and fluorescence spectrophotometry, respectively. All of the thin films showed a main red emission radiated by the transition from the ⁴G_5/2 excited state to the ⁶H_9/2 ground state of the Sm³⁺ ions and several weak bands under ultraviolet excitation with a 279 nm wavelength. The optimum growth temperature for depositing the high‐quality CaNb₂O₆:Sm thin films, which was determined from the luminescence intensity, was found to be 400 °C, where the thin film exhibited an orthorhombic structure with a thickness of 370 nm, an average grain size of 220 nm, a band gap energy of 3.99 eV, and an average optical transmittance of 85.9%. These results indicate that the growth temperature plays an important role in controlling the emission intensity and optical band gap energy of CaNb₂O₆:Sm thin films.     

Spray deposition and characterization of undoped and In‐doped tin disulphide thin films

Undoped and Indium doped tin disulphide (SnS₂) thin films had been deposited onto glass substrates at T_s = 300 °C using spray pyrolysis technique under atmospheric pressure with stannous chloride, indium chloride and thiourea as precursors. The structural, optical and electrical properties of the deposited films were characterized. The XRD pattern revealed that the undoped and doped films had preferred orientation along (002) plane with hexagonal structure. FESEM micrographs had shown that morphologies of the films changed with indium doping. Optical constant such as refractive index (n), extinction coefficient (k), real and imaginary parts of dielectric constants were evaluated from transmittance and reflectance spectra in UV‐Visible spectroscopy. The optical absorption data were used to determine the band gap energy and it was found to be 2.75 eV for undoped and 2.50 eV for indium doped films respectively. The room temperature dark resistivity was found to be 4.545 × 10³ Ω‐cm and 5.406 × 10³ Ω‐cm for undoped and In‐doped films respectively.     

Investigation of optical band gap in potassium acid phthalate single crystal

Optical absorption in photonic crystals of potassium acid phthalate has been measured at room temperature, from which the band gap has been determined and the optical band gap was calculated by using absorption spectrum. The analysis of absorption coefficient in the absorption region reveals a direct band gap of 3.70 eV. Further this study includes the theoretical calculations to determine the optical constant of the material and a technique for photonic band gap tuning which is minimally required to develop the optoelectronic device. It was confirmed that potassium acid phthalate crystal has maximum transparency in the entire visible region and hence it exhibits industrial application oriented properties. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of temperature and isomorphic atom substitution on optical absorption edge of TlInS2xSe2(1‐x) mixed crystals (0.25 ≤ x ≤ 1)

The optical properties of the TlInS_2xSe_2(1‐x)mixed crystals (0.25 ≤ x ≤ 1) have been investigated through the transmission and reflection measurements in the wavelength range of 400–1100 nm. The optical indirect band gap energies were determined by means of the analysis of the absorption data. It was found that the energy band gaps decrease with the increase of selenium atoms content in the TlInS_2xSe_2(1‐x)mixed crystals. The transmission measurements carried out in the temperature range of 10–300 K revealed that the rates of change of the indirect band gaps with temperature are γ = –9.2×10^–4 eV/K, –6.1×10^–4 eV/K, –4.7×10^–4 eV/K and –5.6×10^–4 eV/K for TlInS₂, TlInS_1.5Se_0.5, TlInSSe and TlInS_0.5Se_1.5 crystals, respectively. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of temperature on the microcrystalline structure of thermally evaporated Sb2S3 thin films

Thin films of antimony trisulfide (Sb₂S₃) were prepared by thermal evaporation under vacuum (p=5×10^–5 torr) on glass substrates maintained at various temperatures between 293 K and 523 K. Their microstructural properties have obtained by transmission electron microscopy (TEM). The electron diffraction analysis showed the occurrence of amorphous to polycrystalline transition in the films deposited at higher temperature of substrates (523 K). The polycrystalline thin films were found to have an orthorhombic structure. The interplanar distances and unit‐cell parameters were determined by high‐resolution transmission electron microscopy (HRTEM) and compared with the standard values for Sb₂S₃. The surface morphology of Sb₂S₃ thin films was investigated by scanning electron microscopy (SEM). The optical transmission spectra at normal incidence of Sb₂S₃ thin films have been measured in the spectral range of 400–1400 nm. The analysis of the absorption spectra revealed indirect energy gaps, characterizing of amorphous films, while the polycrystalline films exhibited direct energy gap. From the photon energy dependence of absorption coefficient, the optical band gap energy, E_g, were calculated for each thin films. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis,growth and characterization of L‐histidinium acetate dihydrate single crystals

L‐histidinium acetate dihydrate {abbreviated as LHAc; [C₆H₁₀ N₃O₂⁺ C₂H₃O₂^‐ 2H₂O], a new nonlinear optical (NLO) material has been grown from aqueous solution. The grown crystals were subjected to X‐ray diffraction, Fourier transform infrared (FTIR) and FT‐Raman analyses. Thermal studies have been carried out for its thermal stability. Optical behaviour such as UV‐Vis‐NIR spectrum and second harmonic generation (SHG) were also investigated. Its SHG efficiency was found as d_eff = 2.2 d_eff (KDP). (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of Cu2ZnSnSe4 nanocrystals prepared by one pot route

Quaternary compound Cu₂ZnSnSe₄ (CZTSe) is one of the most promising absorber layer materials for thin film solar cells. In present work, the CZTSe nanocrystals were successfully synthesized via one pot route, and the influences of reaction temperature on the structural, compositional, morphological and optical properties of as‐synthesized CZTSe nanocrystals were investigated in detail via X‐ray powder diffraction (XRD), energy dispersive X‐ray spectrometry (EDS), transmission electron microscopy (TEM) and UV‐Vis spectrophotometry, respectively. The characterization results of as‐synthesized nanocrystals, under optimal synthesis condition (250 °C, 1 h), indicated that the nanocrystals was monodispersed with polycrystalline, the size was in the range of 10–15 nm, and the band gap energy was around 1.44 eV which is very closed to the best band gap energy for the solar cell. All results suggested that the as‐synthesized CZTSe nanocrystals were good light absorber layer material for thin film solar cell.     

Nanocrystalline transparent SnO2‐ZnO films fabricated at lower substrate temperature using a low‐cost and simplified spray technique

Nanocrystalline and transparent conducting SnO₂‐ ZnO films were fabricated by employing an inexpensive, simplified spray technique using a perfume atomizer at relatively low substrate temperature (360±5 °C) compared with conventional spray method. The structural studies reveal that the SnO₂‐ZnO films are polycrystalline in nature with preferential orientation along the (101) plane. The dislocation density is very low (1.48×10¹⁵lines/m²), indicating the good crystallinity of the films. The crystallite size of the films was found to be in the range of 26–34 nm. The optical transmittance in the visible range and the optical band gap are 85% and 3.6 eV respectively. The sheet resistance increases from 8.74 kΩ/□ to 32.4 kΩ/□ as the zinc concentration increases from 0 to 40 at.%. The films were found to have desirable figure of merit (1.63×10^–2 (Ω/□)^–1), low temperature coefficient of resistance (–1.191/K) and good thermal stability. This simplified spray technique may be considered as a promising alternative to conventional spray for the massive production of economic SnO₂ ‐ ZnO films for solar cells, sensors and opto‐electronic applications. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Specific features of the optical spectra in Tl2In2S3Se layered single crystals

The optical properties of Tl₂In₂S₃Se layered single crystals have been studied by means of transmission and reflection measurements in the wavelength range of 450‐1100 nm. The analysis of the absorption data revealed the presence of both optical indirect and direct transitions with energy band gaps of 2.16 and 2.42 eV, respectively. The observed coexistence of indirect and direct energy band gaps is related to the anisotropy of the Tl‐containing layered crystals. The dispersion of the refractive index is discussed in terms of the Wemple‐DiDomenico single‐effective‐oscillator model. The refractive index dispersion parameters: oscillator energy, dispersion energy, oscillator strength and zero‐frequency refractive index were found to be 4.78 eV, 43.58 eV, 13.18 × 10¹³ m^–2 and 3.18, respectively. From X‐ray powder diffraction study, the parameters of monoclinic unit cell were determined. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical characterization of thermally evaporated thin CdO films

Cadmium Oxide films have been prepared by vacuum evaporation method on a glass substrate at room temperature. Detailed structural, optical, and electrical properties of the films are presented at different annealing temperatures. The crystal structure of the samples was studied by X‐ ray diffraction. The spectral absorption coefficient of the CdO film at the fundamental absorption region (450‐650nm) was determined using the spectral data of transmittance. The direct and indirect band gap energies were determined and found to be 2.33 eV and 1.95 eV respectively. The third order optical nonlinearities χ(3) of CdO films has been measured used the z‐can technique. The real and imaginary parts of χ(3) have been measured at 514 nm and found to be 1.7x10^‐3 esu and 3.0x10^‐3 esu, respectively. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)