Temperature dependence of growth orientation and surface morphology of Li‐doped ZnO thin films on SiO2/Si substrates

ZnO thin films doped with Li (ZnO:Li) were deposited onto SiO₂/Si (100) substrates by direct‐current sputtering technique in the temperature range from room temperature to 500 °C. The crystalline structure, surface morphology and composition, and optical reflectivity of the deposited films were studied by X‐ray diffraction (XRD), Scanning Electron Microscopy (SEM), X‐ray Photoelectron Spectroscopy (XPS) and optical reflection measurements. Rough surface p‐type ZnO thin film deposition was confirmed. The results indicated that the ZnO:Li films growed at low temperatures show c‐axis orientation, while a‐axis growth direction is preferable at high temperatures. Moreover, the optical reflectivity from the surface of the films matched very well with the obtained results. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of zinc oxide crystals with different shapes from zincate aqueous solutions stabilized with triethanolamine

ZnO crystals were synthesized from basic aqueous solutions including zincate ions stabilized with triethanolamine (N(C₂H₄OH)₃, teaH₃) by heating at 60°C. The influence of the basicity of the solutions on the morphology of the ZnO crystals was examined. The aqueous solutions were prepared using ZnSO₄·7H₂O, N(CH₃)₄OH (TMAOH), and teaH₃ as a zinc source, a base, and a stabilizer, respectively, at a zinc concentration of 0.2 M at a teaH₃ / Zn molar ratio of 4. Clear solutions were obtained at a molar ratio of TMAOH / Zn ≥ 3.0. When the clear solutions, in which glass or polyester substrates were placed, were heated at 60°C, agglomerates of ZnO crystals were deposited on the substrates in the TMAOH / Zn range from 3.0 to 3.6. With increasing the TMAOH / Zn ratio, the shape of the resulting ZnO crystals changed from a short asymmetric column with a hexagonal flat edge and a rounded one, through a rocket‐like shape formed by intergrowth, to a hexagonal rod. Although no films of ZnO were formed, ZnO crystals with different shapes were synthesized. When the glass substrates pre‐coated with a ZnO thin film by a sol‐gel method were used, highly oriented, dense ZnO films were formed. The films consisted of rod‐like crystals aligned normal to the substrate surface. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural and optical properties of TiO2:SnO2 thin films prepared by sol gel method

ABSTRACT

TiO₂:SnO₂ thin films were deposited on glass substrates, by using sol gel spin coating method with different ratio (3%, 5% and 7%) at 3200 rpm, to study their effect on different properties of TiO₂: SnO₂ thin films. The structural and optical properties of films have studied for different ratio. These deposited films have been characterized by various methods such as X-Ray Diffraction (XRD), Ultra Visible spectroscopy. The (XRD) can be used to identify crystal structure of as deposited films. The Transmission spectra have shown the transparent and opaque parts in the visible and UV wavelengths.     

Spray deposition and characterization of undoped and In‐doped tin disulphide thin films

Undoped and Indium doped tin disulphide (SnS₂) thin films had been deposited onto glass substrates at T_s = 300 °C using spray pyrolysis technique under atmospheric pressure with stannous chloride, indium chloride and thiourea as precursors. The structural, optical and electrical properties of the deposited films were characterized. The XRD pattern revealed that the undoped and doped films had preferred orientation along (002) plane with hexagonal structure. FESEM micrographs had shown that morphologies of the films changed with indium doping. Optical constant such as refractive index (n), extinction coefficient (k), real and imaginary parts of dielectric constants were evaluated from transmittance and reflectance spectra in UV‐Visible spectroscopy. The optical absorption data were used to determine the band gap energy and it was found to be 2.75 eV for undoped and 2.50 eV for indium doped films respectively. The room temperature dark resistivity was found to be 4.545 × 10³ Ω‐cm and 5.406 × 10³ Ω‐cm for undoped and In‐doped films respectively.     

Fabrication and characterization of transparent conductive ZnO:Al thin films prepared by direct current magnetron sputtering with highly conductive ZnO(ZnAl2O4) ceramic target

Using a highly conductive ZnO(ZnAl₂O₄) ceramic target, c-axis-oriented transparent conductive ZnO:Al₂O₃ (ZAO) thin films were prepared on glass sheet substrates by direct current planar magnetron sputtering. The structural, electrical and optical properties of the films (deposited at different temperatures and annealed at 400°C in vacuum) were characterized with several techniques. The experimental results show that the electrical resistivity of films deposited at 320°C is 2.67×10⁻⁴ Ω cm and can be further reduced to as low as 1.5×10⁻⁴ Ω cm by annealing at 400°C for 2 h in a vacuum pressure of 10⁻⁵ Torr. ZAO thin films deposited at room temperature have flaky crystallites with an average grain size of ∼100 nm; however those deposited at 320°C have tetrahedron grains with an average grain size of ∼150 nm. By increasing the deposition temperature or the post-deposition vacuum annealing, the carrier concentration of ZAO thin films increases, and the absorption edge in the transmission spectra shifts toward the shorter wavelength side (blue shift).     

Microstructural,optical and electrical properties of GeO2 thin films prepared by sol‐gel method

GeO₂ thin films were prepared by sol‐gel method on ITO/Glass substrate. The electrical and optical properties and the microstructures of these films were investigated with special emphasis on the effects of an annealing treatment in ambient air. The films were annealed at various temperatures from 500 °C to 700 °C. Structural analysis through X‐ray diffraction (XRD) and atomic force microscope (AFM) showed that surface structure and morphological characteristics were sensitive to the treatment conditions. The optical transmittance spectra of the GeO₂/ITO/Glass were measured using a UV‐visible spectrophotometer. All films exhibited GeO₂ (101) orientation perpendicular to the substrate surface where the grain size increased with increasing annealing temperature. The optical transmittance spectroscopy further revealed high transparency (over 70 %) in the wave range 400 – 800 nm of the visible region. At an annealing temperature level of 700 °C, the GeO₂ films were found to possess a leakage current density of 1.31×10^‐6A/cm² at an electrical field of 20 kV/cm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Substrate effect on microstructure and optical performance of sputter‐deposited TiO2 thin films

This study deals with the role of the different substrates on the microstructural, optical and electronical properties of TiO₂ thin films produced by conventional direct current (DC) magnetron sputtering in a mixture of pure argon and oxygen using a Ti metal target with the aid of X–ray diffractometer (XRD), ultra violet spectrometer (UV–vis) and atomic force microscopy (AFM) measurements. Transparent TiO₂ thin films are deposited on Soda lime glass, MgO(100), quartz and sitall substrates. Phase purity, surface morphology, optical and photocatalytic properties of the films are compared with each other. It is found that the amplitude of interference oscillation of the films is in a range of 77‐89%. The transmittance of the film deposited on Soda lime glass is the smallest while the film produced on MgO(100) substrate obtains the maximum transmittance value. The refractive index and optical band gap of the TiO₂ thin films are also inferred from the transmittance spectra. The results show that the film deposited on Soda lime glass has the better optical property while the film produced on MgO(100) substrate exhibits much better photoactivity than the other films because of the large optical energy band gap. As for the XRD results, the film prepared on MgO(100) substrate contains the anatase phase only; on the other hand, the other films contain both anatase and rutile phases. Furthermore, AFM images show that the regular structures are observed on the surface of all the films studied. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and optical properties of AgGaS2 nanofilms

In this paper, AgGaS₂ nanofilms have been prepared by a two‐step process involving the successive ionic layer absorption and reaction (SILAR) and annealing method. Using AgNO₃, GaCl₃ and Na₂S₂O₃ as reaction sources, the mixture films were firstly deposited on quartz glass substrates at room temperature, and then annealed in Ar environment at 200–500 °C for 4 h, respectively. The effects of annealing temperature on structural and optical properties were investigated by XRD, UV‐Vis, EDS and photoluminescence (PL) spectra. It was revealed in XRD results that α‐Ag₉GaS₆ was contained in the samples annealed at 200 °C, and this phase was decreased with increase of the annealing temperatures. When the sample was annealed at above 400 °C, the chalcopyrite AgGaS₂ nanofilm was obtained. The preferred orientation was exhibited along the (112) plane. It was shown in atomic force microscopy (AFM) results that the grain sizes in AgGaS₂ nanofilms were 18‐24 nm and the thin films were smooth and strongly adherent to the substrates. When the annealing temperature was higher than 400 °C, it is an optimum condition to improve the structural and optical properties of the AgGaS₂ thin films. The room temperature PL spectra of AgGaS₂ nanofilms showed prominent band edge emission at 2.72 eV. Based on all results mentioned above, it can be concluded that the SILAR‐annealing method is preferable to preparing high‐quality AgGaS₂ nanofilms. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and characterisation of Ag incorporated Al2O3 nanocomposite films obtained by sol‐gel method

Sol‐gel route has been applied for a deposition of the thin films of aluminum oxide and Ag embedded in Al₂O₃ films. The films are spin‐coated on Si and quartz substrates with the film thickness of 120 nm. XRD analysis has been used for the determination of the film structure. FTIR spectroscopy is applied for studying vibrational properties of the obtained coatings. Optical characterization is done by UV‐VIS spectroscopy. The formation of Ag nanoparticles has been confirmed by XRD and optical data. The sol‐gel process is found to be useful technology for incorporation of Ag nanoparticles in the metal oxide matrices. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and characterization of ZnO-TiO2 films obtained by sol-gel method

The sol-gel route has been applied to obtain ZnO-TiO₂ thin films. For comparison, pure TiO₂ and ZnO films are also prepared from the corresponding solutions. The films are deposited by a spin-coated method on silicon and glass substrates. Their structural and vibrational properties have been studied as a function of the annealing temperatures (400-750 °C). Pure ZnO films crystallize in a wurtzite modification at a relatively low temperature of 400 °C, whereas the mixed oxide films show predominantly amorphous structure at this temperature. XRD analysis shows that by increasing the annealing temperatures, the sol-gel Zn/Ti oxide films reveal a certain degree of crystallization and their structures are found to be mixtures of wurtzite ZnO, Zn₂TiO₄, anatase TiO₂ and amorphous fraction. The XRD analysis presumes that Zn₂TiO₄ becomes a favored phase at the highest annealing temperature of 750 °C. The obtained thin films are uniform with no visual defects. The optical properties of ZnO-TiO₂ films have been compared with those of single component films (ZnO and TiO₂). The mixed oxide films present a high transparency with a slight decrease by increasing the annealing temperature.     

Investigation of the effect of aluminum doped zinc oxide (ZnO:Al) thin films by spray pyrolysis

ABSTRACT

In this study, aluminum doped zinc oxide thin films were deposited on ordinary glass substrates at the temperature of 425°C by spray pyrolysis technique for various doping concentrations of aluminum ranging from 1 to 5 at.%. The effect of dopant concentration on structural, morphological and optical properties of ZnO:Al thin films was studied. Optical band gap of the films increased with doping percentage and started to decrease from 2 at.% of dopant. The average transmittance for 2at.% ZnO:Al film is significantly increased over 90% in the visible region at 450 nm which is crucial for optoelectronic applications.     

Optical and structural characterisation of zinc oxide thin films prepared by sol‐gel process

Zinc oxide thin films have been prepared on different substrates by the sol‐gel method using 2‐methoxyethanol solution of zinc acetate dihydrate stabilized by monoethanolamine. The photoluminescence spectra of the films show the band‐edge and sub‐band transitions. The intensity of the band edge emission peak increases, while the intensity of the deep level emission peak decreases in the films coated on sapphire substrate. Transmittance spectra show that the films are transparent beyond 400 nm. The structural property of the films has been evaluated using X‐ray diffraction. The X‐ray peak intensity of the film (002) grown on sapphire substrate is higher than the films grown on glass and quartz substrates. The AFM images show improvement in the surface of the annealed films as compared to the as‐grown ZnO films coated on sapphire substrates. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photoelectrical properties of crystalline titanium dioxide thin films after thermo‐annealing

This paper reports the photoelectrical properties of sol gel derived titanium dioxide (TiO₂) thin films annealed at different temperatures (425‐900°C). The structure of the as‐grown film was found to be amorphous and it transforms to crystalline upon annealing. The trap levels are studied by thermally stimulated current (TSC) measurements. A single trap level with activation energy of 1.5 eV was identified. The steady state and transient photocurrent was measured and the results are discussed on the basis of structural transformation. The photocurrent was found to be maximum for the films annealed at 425°C and further it decreases with annealing at higher temperatures. The photoconduction parameters such as carrier lifetime, lifetime decay constant and photosensitivity were calculated and the results are discussed as a function of annealing temperature. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural,Morphological and Electrical Studies on Barium Strontium Titanate Thin Films Prepared by Sol‐Gel Technique

The crystal structure, surface morphology, compositional homogeneity and electrical properties of barium strontium titanate (BST) thin films are investigated. The films were deposited on bare silicon and platinum coated silicon substrates by spin coating process. The precursor solution with Ba/Sr ratio 70/30 was prepared by sol‐gel synthesis using metal alkoxides. The crystalline nature and morphology of the films are found to be strongly influenced by the heating cycle adopted to form the Ba_0.7Sr_0.3TiO₃ layer. The elemental composition analysis on the surface and in‐depth confirms the stoichiometry of the films. The dielectric constant at 100 kHz and dissipation factor at room temperature is found to be 120 and 0.0236 for the films with 400nm thickness annealed at 700°C for 2 hrs. The leakage current density of the film is found to be 4x10^‐8 A/cm² from I‐V measurements.     

Sintering behavior of ZnO:Al ceramics fabricated by sol‐gel derived nanocrystalline powders

ZnO:Al ceramics (Zn:Al, 0.95:0.05) were prepared by using sol‐gel derived nanocrystalline powders. XRD patterns of the doped ceramics revealed the existence of both zincite (JCPDS 36‐1451) and gahnite (JCPDS 5‐0669) phases. Gahnite phase (ZnAl₂O₄) was segregated along the ZnO grain boundaries. At the sintering temperature of 1200 °C, relative density of the undoped and Al doped ceramics were measured as 0.695 and 0.628, respectively. Both grain size and relative density of the ceramics decreased with Al doping. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of gamma radiation on the absorption spectra and optical energy gap of Li‐ doped ZnO thin films

We have studied the effect of subsequent gamma (γ) irradiation on the absorption spectra and the optical energy gap of ZnO thin films doped with Li (ZnO:Li). The optical transmission (T) and optical reflection (R) in the wavelength range 190∼800 nm of films deposited at 300 °C on sapphire, MgO or quartz substrates were measured. The dependence of the absorption coefficient α on photon energy hν was determined as a function of γ‐doses. The films show direct allowed interband transition that influenced by the gamma doses. Both the optical energy gap E^opt_g and the absorption coefficient (α) were found to be γ‐dose dependent. The results can be discussed on the basis of γ‐irradiation‐induced defects in the film and on the film structure. The absorption coefficient exhibits exponential dependence on photon energy obeying Urbach's rule in the absorption edge. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The effect of oxygen partial pressure on physical properties of nano‐crystalline silver oxide thin films deposited by RF magnetron sputtering

Nano‐crystalline silver oxide films were deposited on glass and silicon substrates held at room temperature by RF magnetron sputtering of silver target under different oxygen partial pressures. The influence of oxygen partial pressure on the structural, morphological, electrical and optical properties of deposited films was investigated. Varying oxygen partial pressure during the sputter deposition leads to changes of mixed phase of Ag₂O and Ag to a single phase of Ag₂O and to AgO. The X‐ray diffraction and X‐ray photoelectron spectroscopy results showed the formation of single phase Ag₂O with cubic structure at oxygen partial pressures of 2x10^‐2 Pa while the films deposited at higher oxygen partial pressure of 9x10^‐2 Pa showed the formation of single phase of AgO with monoclinic structure. Raman spectroscopic studies on the single phase Ag₂O showed the stretching vibration of Ag‐O bonds. Single‐phase Ag₂O films obtained at oxygen partial pressure of 2x10^‐2 Pa were nano‐crystalline with crystallite size of 20 nm and possessed an electrical resistivity of 5.2x10^‐3 Ωcm and optical band gap of 2.05 eV. The films deposited at higher oxygen partial pressure of 9x10^‐2 Pa were of AgO with electrical resistivity of 1.8x10^‐2 Ωcm and optical band gap of 2.13 eV. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Nanocrystalline transparent SnO2‐ZnO films fabricated at lower substrate temperature using a low‐cost and simplified spray technique

Nanocrystalline and transparent conducting SnO₂‐ ZnO films were fabricated by employing an inexpensive, simplified spray technique using a perfume atomizer at relatively low substrate temperature (360±5 °C) compared with conventional spray method. The structural studies reveal that the SnO₂‐ZnO films are polycrystalline in nature with preferential orientation along the (101) plane. The dislocation density is very low (1.48×10¹⁵lines/m²), indicating the good crystallinity of the films. The crystallite size of the films was found to be in the range of 26–34 nm. The optical transmittance in the visible range and the optical band gap are 85% and 3.6 eV respectively. The sheet resistance increases from 8.74 kΩ/□ to 32.4 kΩ/□ as the zinc concentration increases from 0 to 40 at.%. The films were found to have desirable figure of merit (1.63×10^–2 (Ω/□)^–1), low temperature coefficient of resistance (–1.191/K) and good thermal stability. This simplified spray technique may be considered as a promising alternative to conventional spray for the massive production of economic SnO₂ ‐ ZnO films for solar cells, sensors and opto‐electronic applications. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of laser fluence on c‐axis orientation of LiNbO3 piezoelectric films on nanocrystalline diamond by pulsed laser deposition

Completely c‐axis oriented LiNbO₃ piezoelectric films have been deposited on nanocrystalline diamond (NCD)/Si substrates with SiO₂ buffer layer by pulsed laser deposition. The amorphous SiO₂ buffer layer was formed on NCD/Si substrates by sol‐gel method. The c‐axis orientation and crystallinity of LiNbO₃ films are strongly dependent on the laser fluence, and the laser fluence 3.6 J/cm² is found to be the optimal value for the growth of oriented LiNbO₃ film, which has a smooth surface with composed of a large mount of uniform grains. The average surface roughness of LiNbO₃ films is about 6.7 nm.     

Structural,optical and electrical characterization of HgxCd1‐xTe polycrystalline films fabricated by two‐source evaporation technique

Two‐source thermal evaporation technique was used to prepare Hg_xCd_1‐xTe thin films onto scratch free transparent glass substrates. The structural investigations revealed that thin films were polycrystalline in nature. Transmittance measurements in the wavelength range (500‐2700 nm) were used to calculate optical constants. The analysis of the optical absorption data showed that the optical band gap was of indirect type. In the composition range 0.05 < x < 0.25 the films exhibited an optical band gap between 1.29 and 0.98 eV. In the same composition range the films were p‐type and exhibited a resistivity, which varied between 10² and 10^‐1 Ω‐cm. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)