Facile synthesis of pencil‐like ZnO nanostructures at low temperature

Pencil‐like ZnO nanostructure was synthesized by directly oxidizing granular Zn films, which was thermal deposited in a nitrogen atmosphere from Zn powder in a horizontal tube furnace. The formation of the pencil‐like structure, including a hexagonal rod and a sharp tip with diameter about 60 nm, highly depend on the thickness of the initial zinc film and the temperature of the oxidizing process. ZnO nanorods were formed in a relatively low temperature, while thicker zinc film was apt to form a dense ZnO film with tubular structures. The different structured ZnO materials showed distinguishing optical properties which indicate the intrinsic defects forming in the different growth conditions. The pencil‐like ZnO structures exhibit a relatively strong green emission attributed to the high concentrations of oxygen vacancies and its taper tip has great prospects in field‐emission devices.     

Facile morphology‐controlled hydrothermal synthesis of flower‐like self‐organized ZnO architectures

Flower‐like self‐organized crystalline ZnO architectures were obtained through a facile and controlled hydrothermal process. As‐synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), X‐ray diffraction (XRD), electron diffraction and UV‐Vis spectroscopy. XRD and electron diffraction results confirmed the obtained materials are pure wurtzite ZnO. The effects of different ratios of starting materials and solvent on the morphologies of ZnO hydrothermal products were also evaluated by SEM observations. It is suggested that the use of water, rather than ethanol as the solvent, as well as employing a precursor of Zn(Ac)₂ and 2NaOH (v/v) in hydrothermal reactions are responsible for the generation of specific flower‐like self‐assembled ZnO structures. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Shape‐controlled synthesis of ZnO architectures

Several ZnO nanoarchitectures have been selectively prepared through hydrothermal method including urchin‐shaped, flower‐shaped, butterfly‐shaped, and cacti‐shaped microstructures. The influence of reaction temperature and the concentration of amphiphilic copolymer on the morphologies and shapes of ZnO samples have been studied. The samples were characterized using XRD, TEM, and SEM. It was found that ZnO nanorods or their assemblies were fabricated at higher temperature, whereas ZnO nanosheet architectures were produced at lower temperature. These flower‐shaped architectures possess high BET surface area of 27.43 m²/g. Room temperature UV‐VIS and PL spectra of the as‐obtained ZnO nanoarchitectures have been examined. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Morphology‐photocatalytic properties‐growth mechanism for ZnO nanostructures via microwave‐assisted hydrothermal synthesis

ZnO nanostructures with various morphologies including rod‐like, sheet‐like, needle‐like and flower‐like structures were successfully synthesized via a fast and facile microwave‐assisted hydrothermal process. Reaction temperature, reaction time and the addition of NaOH were adjusted to obtain ZnO with different morphologies. Scanning electron microscopy(SEM), transmission electron microscope(TEM), X‐ray diffraction (XRD) and ultraviolet spectrophotometer (UV) were used to observe the morphology, crystal structure, ultraviolet absorption and photocatalytic activity of the obtained ZnO. The results indicated that growth rate of ZnO nanostructure along [001] direction was more sensitive to temperature compared with those along [101] and [100] directions. The competition between anionic surfactant and OH⁻ played an important role in the formation of ZnO with various morphologies. Flower‐like ZnO had better ultraviolet absorption property and excellent photocatalytic activity than ZnO in the other morphologies. On the basis of the above results, a possible growth mechanism for the formation of ZnO nanostructures with different morphologies was described.     

Synthesis and growth mechanism of ZnO rod‐like nanostructures by a microwave‐assisted low‐temperature aqueous solution route

A zinc oxide (ZnO) nanoarray (rod‐like nanostructure) was successfully synthesized through a low‐temperature aqueous solution and microwave‐assisted synthesis using zinc nitrate hexahydrate (Zn(NO₃)₂·6H₂O) and hexamethylenetetramine (HMTA) as raw materials, and using FTO glass as substrate. The effects of parameters in the preparation process, such as solution concentration, reaction temperature and microwave power, on the morphology and microstructure of ZnO nanoarray were studied. Phase structure and morphology of the products were characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The results indicated that hexagonal wurtzite structure ZnO nanoarray with good crystallization could be prepared through a low‐temperature solution method. When the concentration of the mixed solution was 0.05 M, the reaction temperature was 95 °C, and the reaction time was 4 h, high‐density ZnO regular nanorods of 200 nm diameter were obtained. A possible mechanism with different synthesis methods and the influence of microwave processing are also proposed in this paper.     

Surfactant‐assisted synthesis of novel star‐like PbWO4 hierarchical architectures

Large‐scale star‐like PbWO₄ hierarchical architectures were controllably synthesized by a facile surfactant‐assisted technology under mild conditions in the presence of a mixed solvent of ethylene glycol and water. The morphology, structure, and phase composition of PbWO₄ architectures were characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FE‐SEM), field emission transmission electron microscopy (FE‐TEM), and nitrogen adsorption‐desorption isotherms. The possible formation mechanism of the star‐like PbWO₄ architectures (initial nucleating stage and a subsequent self‐assembly stage) was proposed based on the observations from a time‐dependent morphology evolution process, which may pave the way to shape‐controlled synthesis of inorganic nanocrystals with the complex structures. This route provides a facile strategy to fabricate complex hierarchical PbWO₄ structures. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Low temperature synthesis of spindle‐like ZnO nanostructures under microwave irradiation

A simple and general microwave route is developed to synthesize nanostructured ZnO using Zn(acac)₂·H₂O (acac = acetylacetonate) as a single source precursor. The reaction time has a great influence on the morphology of the ZnO nanostructures and an interesting spindle‐like nanostructure is obtained. The microstructure and morphology of the synthesized materials are investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). It is found that all of them with hexagonal wurtzite phase are of single crystalline structure in nature. Ultraviolet–visible (UV‐vis) absorption spectra of these ZnO nanostructures are investigated and a possible formation mechanism for the spindle‐like ZnO nanostructures is also proposed.     

Hydrothermal synthesis of anatase flower‐like nanostructures for photocatalytic degradation of dye

Flower‐like hierarchical nanostructures of titanium dioxide (TiO₂) have been synthesized in large scale by a facile and controlled hydrothermal and after annealing process. The morphologies of flower‐like hierarchical nanostructures are formed by self‐organization of several tens of radially distributed thin flakes with a thickness of several nanometers holding a larger surface area. The materials are characterized by Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X‐ray diffraction (XRD). The ultraviolet photocatalytic degradation of R6G dyes has been studied over this flower‐like hierarchical nanostructures and the activity is compared with that of commercial P25 TiO₂ under same conditions. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of radial‐like ZnO structure by hydrothermal method with ZnSO4·7H2O and Zn(CH3COO)2·2H2O as zinc sources

Radial‐like ZnO structures were prepared using zinc sulfate (ZnSO₄·7H₂O) and zinc acetate [Zn(CH₃COO)₂·2H₂O] as zinc sources by a facile template‐free hydrothermal method in this paper. Structural and optical properties of radial‐like ZnO structures are characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV‐vis spectrophotometer and photoluminescence measurement (PL). It has been found that the distinct surface morphologies of radial‐like ZnO structures grown by different zinc sources. Slim radial‐like ZnO with a hexagonal wurtzite structure is grown by using ZnSO₄·7H₂O as zinc sources, whereas coarse radial‐like ZnO with zincite structure is achieved by zinc acetate. The UV‐vis absorption spectra of them both display an obvious and significant absorption in the ultraviolet region. The room temperature PL spectra of ZnO structures grown by two different zinc sources possess a common feature that consists of a strong ultraviolet (UV) peak and visible emission band.     

Structure and magnetism of manganese‐doped ZnO powder samples

The magnetic and structural properties of manganese‐doped ZnO powder samples prepared by a solid state method are reported. Magnetization measurements indicate ferromagnetic behavior, with hysteresis observed in the M vs. H behavior at 300 K. Coercive fields were <100 Oe at 300 K. Temperature‐dependent magnetization measurements showed evidence for ordering temperatures of >300 K. However, the results show that ferromagnetism originates from the doped matrix rather than any type of magnetic cluster and the ferromagnetism is due to the defects and/or oxygen vacancies confined to the surface of the grains. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of superconducting sphere‐like Mo2C nanoparticles in an autoclave

Sphere‐like Mo₂C nanoparticles have been synthesized through the reaction of sodium molybdate, anhydrous ethanol and sodium azide at 450 °C for 10 h in a sealed stainless steel autoclave. X‐ray powder diffraction results indicated that the final product was Mo₂C. Transmission electron microscopy (TEM) and scanning elctron microscopy (SEM) were employed to characterize the as‐prepared sample. The sample was mostly composed of sphere‐like particles, which has a superconducting transition temperature of 9.5 K, and its calculated surface area is 30.859 m²/g. The experimental parameters such as reaction temperature and reactants were studied to investigate the reaction mechanism. It was found that sodium azide and reaction temperature played key roles in the formation of sphere‐like Mo₂C nanoparticles. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Solvothermal synthesis of mesoporous slabstone‐like TiO2 and its photodegradation preference in a methyl orange‐rhodamine B mixture solution

Mesoporous slabstone‐like anatase TiO₂ micro‐nanometer composite structure has been successfully synthesized by a facile solvothermal method at 180 °C using polyethylene glycol (PEG) as a structure‐directing agent, followed by calcination at 400 °C for 2 h. The crystal structure and morphology of the product were characterized by XRD, SEM, TEM and HRTEM. Its BET specific surface area was obtained from N₂ adsorption‐desorption isotherm measurement. Rhodamine B (RB) aqueous solution was used to evaluate the photocatalytic activity of the as‐prepared TiO₂ under simulated sunlight irradiation and compared with that of commercial TiO₂ (P25). A RB and methyl orange (MO) coexisting solution was chosen to investigate the photodegradation preference of the slabstone‐like TiO₂ on these two dyes. The results show that the photocatalytic activity of the as‐prepared TiO₂ is much higher than that of P25, and MO is the preferential degradation species in the MO‐RB mixture solution.     

Additive‐free solvothermal synthesis of peanut‐like BiVO4 powders with enhanced photocatalysis activity

Monoclinic peanut‐like BiVO₄ products have been successfully synthesized by a solvothermal method. The volume of CH₃COOH and the concentration of NH₃·H₂O were found to play important roles in the formation of this morphology. The optimal condition for preparation of highly active peanut‐like BiVO₄ samples are the volume of CH₃COOH, which was 5 ml, and the concentration of NH₃·H₂O, which was 2 mol/L. The as‐prepared samples were characterized by XRD, SEM, TEM, DRS, BET, and their photocatalytic activity was evaluated by photocatalytic decolorization of a Rhodamine B (RhB) aqueous solution under visible‐light irradiation. The results demonstrated that BiVO₄ with peanut‐like morphology was better than that of other BiVO₄ samples for photodegradation of RhB.     

Fast synthesis of Cu‐doped ZnO nanosheets at ambient condition

A new, fast and low cost method to produce Cu‐doped ZnO nanosheets is reported for the first time in this paper. Zinc foil specimens were immersed into CuSO₄ aqueous solutions with various concentrations for 3 seconds and then dried at ambient condition. The immersed specimens were characterized with a scanning electron microscope, an X‐ray diffractometer and a transmission electron microscope. The results show that Cu‐doped ZnO nanosheets with a multilayer structure on a cupper layer are formed. Cu‐doped ZnO nanosheets show hexagonal crystalline structure and comprises polycrystalline grains with diameters of 5∼10 nm. A physical modal is suggested to explain the prepared Cu‐doped ZnO nanosheet structure, based on the chemical reactions and a metallurgical cell.     

Surface‐morphology evolution of ZnO nanostructures grown by hydrothermal method

Surface‐morphology evolution of ZnO nanocrystals has been observed by the hydrothermal process. The effects of stirring time and ammonia content on the morphology evolution have been discussed, respectively. Extension of stirring time of the precursor results in morphology transformation from star‐like to wire‐like ZnO nanocrystals. ZnO nuclei aggregation and uniform Zn(OH)₂ precipitation can readily explain these two morphologies, respectively. By increasing the ammonia content in the solution, the morphology of ZnO crystals is transformed from an irregular shape to hexagon sheets to nanorods, and the side length of ZnO crystals is decreased accordingly. Hollow structures are realized at the subsequent solution aging process. Variation of zinc ammonic complex and minimum surface energy can well explain the morphology evolution of ZnO nanostructures.     

Flux growth of straw‐like rutile monocrystals

Millimetric straw‐like rutile monocrystals were grown by the flux growth technique. A suitable mixture of flux (MoO₃, V₂O₅, Li₂CO₃) and amorphous TiO₂ gel was slowly cooled down to 750°C from 1250°C or 1350°C. The best yields of straw‐like rutile were obtained with a nutrient/flux ratio and a cooling rate in the range 0.015‐0.006 and 1.8‐1.9 K h^‐1, respectively. The hollowed crystals were characterized by powder and single‐crystal X‐ray diffraction, scanning electron microscopy, microthermometry, and µ‐Raman spectroscopy. As for skeletal crystal, the formation of axial canals in rutile is attributed to a lack of nutrient due to the viscosity of the melt and the high growth rate along [001]. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experimental and first‐principle investigation of Cu‐doped ZnO ferromagnetic powders

Zn_1‐xCu_x O powders were synthesized by using sol‐gel method. Electronic band structure and ferromagnetic properties of Zn_1‐xCu_x O powders were studied experimentally and theoretically. The simulations are based upon the Perdew‐Burke‐Ernzerhof form of generalized gradient approximation within the density functional theory. Zn_1‐xCu_x O shows dilute ferromagnetism, as a saturated magnetization of 0.9×10^‐3emu/g was observed for Zn_0.95Cu_0.05O powders. The strong p ‐d hybridization between Cu and its four neighbouring O atoms is responsible for the ferromagnetism. Comparing with ZnO whose Fermi level locates at the valence band maximum, the Fermi level of the Zn_1‐xCu_x O shifts upward into the valence band and hence the Zn_1‐xCu_x O system exhibits theoretically a p ‐type metallic semiconducting property. The Zn_1‐xCu_x O system may be a potential candidate in spintronics. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Controlled growth of ZnO torch‐like nanostructure arrays

Single‐crystal ZnO torch‐like nanostructure arrays were synthesized using a simple two‐step pressure controlled thermal evaporation method without any catalyst. The nanostructures had a hierarchical morphology, with well‐hexagonal faceted holders and needle‐like flames on them. The diameter of each single flame was about 20–40nm at the base and 10nm at the tip. Both the holders and flames were found to grow along the [0001] direction. The morphology of the structures could be effectively controlled by varying the growth temperature and vacuum pressure. The experimental results and analysis provided easy strategies to control the morphology of nanostructures and also enhanced the understanding of the growth mechanism. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

PbS microcrystals with a magic‐square‐like structure prepared by a simple hydrothermal method

PbS microcrystals with a magic‐square‐shaped structure were successfully fabricated via a simple hydrothermal route, employing (CH₃COO)₂Pb and Na₂S₂O₃ as the lead and sulfur source without the assistance of any surfactant or template. S₂O₃^2‐ ions acted not only a supplier of S^2‐ ions but also a coordinating reagent. The formation of the above morphology was the direct result of the coordination between thiosulfate ions and lead ions. Researches indicated that the different synthetic approach could influence the morphology of the final product. A possible formation mechanism was suggested. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Microscopic lateral overgrowth by physical vapour transport of GaN on self‐organized diamond‐like carbon masks

Techniques to reduce dislocation densities in GaN grown on foreign substrates are an interesting alternative to bulk growth as long as efficient bulk crystals growth techniques are not available. In this paper a new approach for epitaxial lateral overgrowth (ELO) of GaN through an in‐situ grown self‐organized amorphous (diamond‐like) carbon mask is demonstrated. The ELO was done for the first time by physical vapour transport of Ga, using NH₃ as a nitrogen source. The overgrowth results in a decrease of the threading dislocation density by at least one order of magnitude compared to that of the MOCVD GaN/sapphire templates. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)