Synthesis and properties of α‐Fe2O3 nanorods

We report synthesis of α‐Fe₂O₃ (hematite) nanorods by reverse micelles method using cetyltrimethyl ammonium bromide (CTAB) as surfactant and calcined at 300 °C. The calcined α‐Fe₂O₃ nanorods were characterized by X‐ray diffraction (XRD), high‐resolution scanning electron microscopy (HRSEM), transmission electron microscopy (TEM), energy dispersive spectrometer (EDS), fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometer (VSM). The result showed that the α‐Fe₂O₃ nanorods were hexagonal structure. The nanorods have diameter of 30‐50 nm and length of 120‐150 nm. The weak ferromagnetic behavior was observed with saturation magnetization = 0.6 emu/g, coercive force = 25 Oe and remanant magnetization = 0.03 emu/g. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of spindle‐shaped α‐FeOOH and α‐Fe2O3 nanocrystals

Spindle‐shaped α‐FeOOH nanocrystals were facilely synthesized using a poly (vinyl pyrrolidone) (PVP)‐assisted route under hydrothermal conditions. The chemical compositions and morphol‐ogies of the as‐prepared samples were characterized in detail by X‐ray power diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The experimental results reveal that these spindle‐shaped α‐FeOOH nanocrystals have self‐organized into assemblies with hierarchical nanostructures. The crucial roles of PVP in the hydrothermal synthesis of hierarchical α‐FeOOH nanostructures were discussed. The possible formation mechanism was also suggested. Moreover, the spindle‐shaped α‐Fe₂O₃ nanocrystals could be easily obtained after calcining the α‐FeOOH prepared by the PVP‐assisted hydrothermal process. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

α‐Fe2O3 nanospindles loaded with ZnO nanocrystals: Synthesis and improved gas sensing performance

ZnO/α‐Fe₂O₃ nanocomposites were fabricated through a two‐step hydrothermal method. The morphology and composition of the as‐synthesized products were characterized by X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray spectroscopy (EDS), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The gas sensing properties of the fabricated products were investigated towards ethanol, acetone, propanol, isopropanol, formaldehyde, chloroform and so on. The results demonstrated that the ZnO/α‐Fe₂O₃ nanocomposites exhibited excellent sensing properties and showed remarkably higher sensing responses and much lower optimum operating temperature compared to individual ZnO and α‐Fe₂O₃. In addition, the ZnO/α‐Fe₂O₃ nanocomposites have some selectivity for ethanol, propanol and isopropanol. The possible gas sensing mechanism was also proposed. Our studies demonstrate that our fabricated materials could be widely used in the future.     

Capsule‐like α‐Fe2O3 nanoparticles: Synthesis,characterization, and growth mechanism

Uniform capsule‐like α‐Fe₂O₃ particles were synthesized via a simple hydrothermal method, employing FeCl₃ and CH₃COONa as the precursors and sodium dodecyl sulfate (SDS) as soft template. X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), and high‐resolution transmission electron microscopy were used to characterize the structure of synthesized products. Some factors influencing the formation of capsule‐like α‐Fe₂O₃ particles were systematically investigated, including different kinds of surfactants, the concentration of SDS, and reaction times. The investigation on the evolution formation reveals that SDS was critical to control the morphology of final products, and a possible five‐step growth mechanism was presented by tracking the structures of the products at different reaction stages.     

Fabrication of Fe3O4 octahedra by a triethanolamine‐assisted hydrothermal process

Octahedral Fe₃O₄microcrystals were synthesized using a triethanolamine‐assisted route under hydrothermal conditions. The chemical compositions and morphologies of the as‐prepared samples were characterized in detail by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). During the hydrothermal process for the preparation of Fe₃O₄ octahedra, the possible mechanism was discussed to elucidate the formation of the octahedral Fe₃O₄microcrystals. Triethanolamine and hydrazine hydrate play important roles in the formation of the final products. The magnetic property of sample was evaluated on a vibrating sample magnetometer (VSM) at room temperature. The values of saturation magnetization and coercivity of octahedral Fe₃O₄are about 103 emu/g and 157 Oe, respectively. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Surfactant directed synthesis of mesoporous alumina and α‐alumina single crystal

Mesoporous Al₂O₃ were positively synthesized via treatment of the freshly precipitated amorphous alumina gel using aluminium sulphate as aluminium source, and sodium dodecyl sulphate (SDS) as structure‐directing agent (SDAs). The microstructures, morphologies and textural properties of the as‐prepared materials were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and thermo gravimetric analysis (TG‐DTA). The calcined product at 600 °C was highly porous in nature having a BET surface area of 42 m²/g. These porous Al₂O₃ exhibits excellent adsorption performance for Congo red and the corresponding decolourisation efficiencies reached 99% in just 15 min at 27 °C. The subsequent calcined product at 1200 °C is the alpha alumina single crystal hexagonal platelets with rhombohedral crystallization.     

Rapid synthesis and catalytic performance of α‐Mn2O3 single‐crystal nanowires

Single‐crystal α‐Mn₂O₃ nanowires were prepared via a “self‐sacrificing template” route, simply by calcining the prepared α‐MnO₂ nanowire precursors at 550 °C for 1.5 h. XRD, TEM, SEM and HRTEM characterizations show that the as‐prepared α‐Mn₂O₃ samples are all phase pure and the nanowires have uniform diameters of approximately 15‐30 nm and lengths up to several micrometers. The catalytic performances of the prepared α‐Mn₂O₃ nanowires were studied in the degradation of coking wastewater with H₂O₂ as the oxidant, and the technological conditions were optimized by single‐factor and orthogonal experiments. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Low‐temperature urea‐assisted hydrothermal synthesis of Bi2S3 nanostructures with different morphologies

Different morphologies of single‐crystalline orthorhombic phase bismuth sulfide (Bi₂S₃) nanostructures, including sub‐microtubes, nanoflowers and nanorods were synthesized by a urea‐assisted hydrothermal method at a low temperature below 120 °C for 12 h. The as‐synthesized powders were characterized by X‐ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and UV‐vis spectrophotometry. The experimental results showed that the sulfur sources had a great effect on the morphology and size of the resulting powders. The formation mechanism of the Bi₂S₃ nanostructures with different morphologies was discussed. All Bi₂S₃ nanostructures showed an appearance of blue shift relative to the bulk orthorhombic Bi₂S₃, which might be ascribed to the quantum size effect of the final products. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ag@Fe3O4 nanowire: fabrication,characterization and peroxidase‐like activity

With a facile solvothermal method, Ag@Fe₃O₄ nanowire was successfully prepared and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The obtained Ag@Fe₃O₄ nanowire posses enhanced peroxidase‐like activity with good stability and high absorbance. The optimization of pH, H₂O₂ concentration and loading capacity were carried out. The result of kinetic analysis indicates that the catalyzed reaction followed a Michaelis‐Menten behavior. The good peroxidase‐like activity makes Ag@Fe₃O₄ nanowire be promising for real application in biomedicine.     

PMA‐b‐PAA‐controlled synthesis of one‐dimensional CaCO3 superstructures

Crystallization of calcium carbonate (CaCO₃) crystals by a gas‐liquid diffusion method has been carried out in aqueous solution using a double‐hydrophilic block copolymer (DHBC) poly(maleic anhydride)‐b‐poly(acrylic acid) (PMA‐b‐PAA). The as‐prepared products were characterized with X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), selected area electron diffraction (SAED), high‐resolution transmission electron microscopy (HRTEM) and infrared spectroscopic analysis (FT‐IR). Uniform one‐dimensional calcite micro/nanostructures with different morphologies are fabricated through an assembled process. The influence of PMA‐b‐PAA copolymer concentration on the morphology of calcite nano/microwires is investigated, which plays an important role in the morphological control of building blocks composed of one‐dimensional calcite crystals. The possible formation mechanism of one‐dimensional CaCO₃ crystals was discussed. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Some structural considerations on the perovskite‐type A1‐ySryCo1‐xFexO3‐δ solid solution series

Solid solution series of La_1‐ySr_yCo_1‐xFe_xO_3‐δ were extensively studied in the past as cathode materials for solid oxide fuel cells. However, the crystal structure behavior of La_1‐ySr_yCo_1‐xFe_xO_3‐δ solid solution series when La‐ions are replaced with another rare‐earth ion or metallic alkaline earth metal is at present not fully understood. Here we report X‐ray powder diffraction measurements performed on samples of the Sm_0.8Sr_0.2Co_1‐xFe_xO_3‐δ solid solution series. This study demonstrates that the average A‐cation radius, as well as the Fe content (x), affects the structural modification of the A_1‐ySr_yCo_1‐xFe_xO_3+δ solid solution series significantly. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Room‐temperature synthesis and characterization of cross‐like Pr2(C2O4)3·10H2O micro‐particles

Cross‐like Pr₂(C₂O₄)₃·10H₂O micro‐particles were synthesized through a simple precipitation method at room temperature. The products were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), field‐emission scanning electron microscopy (FESEM), thermogravimetry–differential thermal analysis (TG‐DTA) and photoluminescence (PL). The possible formation mechanism of the cross‐like Pr₂(C₂O₄)₃·10H₂O micro‐particles was discussed, and Pr₆O₁₁ with similar morphology was obtained by calcining the oxalate precursor. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Well‐defined Sb2S3 nanostructures: citric acid‐assisted synthesis,electrochemical hydrogen storage properties

Well‐defined (three‐dimensional) 3‐D dandelion‐like Sb₂S₃ nanostructures consisted of numerous nanorods have been achieved via a facile citric acid‐assisted solvothermal process. The as‐prepared products were characterized by X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high‐resolution TEM (HRTEM), respectively. The influence factors of the formation of the hierarchical Sb₂S₃ nanostructures are discussed in details based on FESEM characterizations. By simply controlling the quantity of citric acid, the nucleation and growth process can be readily tuned, which brings the different morphologies and nanostructures of the final products. On the basis of a series of contrastive experiments, the aggregation‐based process and anisotropic growth mechanism are reasonably proposed to understand the formation mechanism of Sb₂S₃ hierarchical architectures with distinctive morphologies including nanorods, and dandelion‐like nanostructures. Charge‐discharge curves of the obtained Sb₂S₃ nanostructures were measured to investigate their electrochemical hydrogen storage behaviors. It revealed that the morphology played a key role on the hydrogen storage capacity of Sb₂S₃ nanostructure. The dandelion‐like Sb₂S₃ nanostructures exhibited higher hydrogen storage capacity (108 mAh g⁻¹) than that of Sb₂S₃ nanorods (95 mAh g⁻¹) at room temperature.     

Controllable synthesis and field emission properties of In2O3 nanostructures

Large‐scale In₂O₃ nanorods, nanocubes and nanowires have been successfully synthesized by chemical vapor deposition route under atmospheric pressure. The structures and morphologies were characterized by x‐ray diffraction (XRD), scanning election microscopy (SEM) and high‐resolution transmission electron microscopy (HRTEM). The growth mechanisms of these In₂O₃ nanostructures were analyzed in detail based on the experimental results. Field‐emission measurements of these nanostructures demonstrated that nanorods with rectangular cross‐section possessed good performance with a turn‐on field of 2.47 Vμm^–1 and a field enhancement factor of 4597. The room‐temperature photoluminescence (PL) spectrum of the In₂O₃ nanostructure showed UV emission centered at about 396 nm and visible emissions located at 541 and 623 nm. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and characterization of large La1‐xPbxMnO3+δ (x=0.32–0.35) crystals

Large crystals of La_0.63Pb_0.37Mn O_3+δ with small La(Pb)‐ deficiency of about 0.005‐0.01 at.% were grown by high temperature solution growth method. The structure of the grown crystals was determined as rhombohedral with R‐3 space group by single‐crystal X‐ray diffractometry. The surface morphology of the crystals and the exact chemical composition was examined by scanning electron microscopy and energy dispersive X‐ray analysis methods, respectively. The IR‐transmission spectrum reveals the presence of Mn³⁺O₆‐ and Mn⁴⁺O₆‐ octahedra in the lattice of La_0.63Pb_0.37Mn O_3+δ crystals. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Zr‐doped CeO2 Hollow slightly‐truncated nano‐octahedrons: One‐pot synthesis,characterization and their application in catalysis of CO oxidation

Zirconium‐doped ceria hollow slightly‐truncated nano‐octahedrons (HTNOs) (Ce_1‐xZr_xO₂) were synthesized by a one‐pot, facile hydrothermal method. The morphology and crystalline structure were characterized with powder X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and the high resolution transmission electron microscopy (HRTEM). The composition and chemical valence on the surface of the as‐prepared Ce_1‐xZr_xO₂ powders were detected by X‐ray photoelectron spectroscopy (XPS) and energy dispersive spectrometry (EDS). The surface area and pore size distribution of as‐obtained Zr‐doped ceria HTNOs were measured by N₂ adsorption‐desorption measurement. Mechanisms for the growth of Zr‐doped ceria HTNOs are proposed as both oriented attachment and Ostwald ripening process and the formation of the hollow structure is strongly dependent on the addition of Zr⁴⁺ ions. Furthermore, the as‐obtained Zr‐doped ceria HTNOs revealed superior catalytic activity and thermal stability toward CO oxidation compared to pure ceria. It may provide a new path for the fabrication of inorganic hollow structures on introducing alien metal ions.     

Phase‐selective crystallization of nickel phosphate VSB‐5 with (2‐hydroxyethyl) trimethylammonium hydroxide as template

Several nickel phosphate molecular sieves were synthesized by conventional heating (CH) and microwave assisted hydrothermal (MAH). Nickel phosphate VSB‐5 (Versailles Santa Barbara‐5) was synthesized with conventional oven for 72 h or with microwave for 1 h and followed by conventional oven for 48 h in the presence of (2‐hydroxyethyl) trimethylammonium hydroxide as template. The phase transformation is observed by variation of CH time for the synthesis of nickel phosphate molecular sieves. At CH time of 24 h, the VSB‐5 crystal together α‐Ni₂P₂O₇, Ni₂P₄O₁₂ and unknown phases were produced but the pure VSB‐5 crystal was obtained in the CH time of 48 h or more. At high content of nickel, a mixture of α‐Ni₂P₂O₇, Ni₂P₄O₁₂ phases and small amount of VSB‐5 crystal, was achieved but pure VSB‐5 crystal was obtained in the lower level of nickel and other phases are vanished. An efficient ultrasonic‐assisted aging was found for the synthesis of nickel phosphate molecular sieve, in which by ultrasonic mixing of 0.5 h followed microwave of 1 h, the CH time is significantly reduced from 48 to 24 h. The morphology of nickel phosphate crystals is highly influenced in the presence of ethylene glycol as co‐solvent. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Facile morphology‐controlled hydrothermal synthesis of flower‐like self‐organized ZnO architectures

Flower‐like self‐organized crystalline ZnO architectures were obtained through a facile and controlled hydrothermal process. As‐synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), X‐ray diffraction (XRD), electron diffraction and UV‐Vis spectroscopy. XRD and electron diffraction results confirmed the obtained materials are pure wurtzite ZnO. The effects of different ratios of starting materials and solvent on the morphologies of ZnO hydrothermal products were also evaluated by SEM observations. It is suggested that the use of water, rather than ethanol as the solvent, as well as employing a precursor of Zn(Ac)₂ and 2NaOH (v/v) in hydrothermal reactions are responsible for the generation of specific flower‐like self‐assembled ZnO structures. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis,structure and electrochemical performance of cobaltite‐based composite cathodes for IT‐SOFC

The development of novel and high‐performance cathodes is a critical issue to be addressed in order to reduce Solid Oxide Fuel Cells (SOFCs) operation temperature to the 600‐800 °C range or less. The performance of CeO₂‐based composite cathodes is very attractive to such operational temperatures. In this work, La_0.6Sr_0.4Co_0.2Fe_0.8O₃ (LSCF) and Ce_0.8Sm_0.2O_1.9 (SDC) powders were synthesized by different synthesis methods and mechanically mixed to prepare LSCF‐SDC composite cathodes. Screen‐printed LSCF‐SDC/CGO/LSCF‐SDC symmetrical cells were sintered at 1150 °C for 4 h and characterized by electrochemical impedance spectroscopy in static air. X‐ray diffraction and scanning electron microscopy were employed to characterize the powders. Area specific resistance values of 0.72 and 2.77 Ω cm² at 800 °C were found for composite cathodes containing SDC powder synthesized by modified Pechini and microwave‐assisted combustion methods, respectively. Furthermore, the activation energy of the composite cathode containing SDC derived from modified Pechini method is 1.18 eV, i.e., much lower than 1.73 eV, value determined for LSCF with SDC from microwave‐combustion method.     

Crystalline bismuth oxide nanorods fabricated on Pt‐coated substrates using a trimethylbismuth and oxygen mixture

The current work reports the fabrication of crystalline Bi₂O₃ nanorods on Pt‐coated Si substrates using trimethylbismuth and O₂ as the bismuth and the oxygen sources, respectively, in the metalorganic chemical vapor deposition process. Their microstructures were characterized by scanning electron microscopy, X‐ray diffraction, and transmission electron microscopy. The obtained nanorods were crystalline, with their diameters in the range of 20–200 nm. The absence of tip‐nanoparticle and the presence of predeposited Bi₂O₃ layer indicated that the growth was dominated by a vapor‐solid process. The photoluminescence measurements of the Bi₂O₃ nanorods at room temperature exhibited an emission band peaked at around 422 nm. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)