A Raman spectroscopic and TEM study on the structural evolution of Na2Ti3O7 during the transition to Na2Ti6O13

The synthesis of sodium hexatitanate from sodium trititanate was characterized by Raman spectroscopy, X‐ray diffraction (XRD) and high‐resolution transmission electron microscopy (HRTEM). The structural evolution from trititanate to hexatitanate was studied using Raman spectra, XRD and HRTEM techniques. It was found that the Raman bands at 279 cm⁻¹ corresponding to very long Ti O bonds and at 883 cm⁻¹ corresponding to the very short Ti O bonds decrease in intensity and finally disappear during the transition from sodium trititanate to sodium hexatitanate. The band at 922 cm⁻¹ corresponding to an intermediate‐length Ti O bond was observed to become stronger with the increase in temperature, indicating that there is no terminal oxygen atom in the crystal structure of Na₂Ti₆O₁₃ and that all the oxygen atoms become linearly coordinated by two titanium atoms. Furthermore, the TiO₆ octahedron in Na₂Ti₆O₁₃ are more regular because the very long (2.2 Å) or very short (1.7 Å) Ti O bonds disappear. It is revealed that the phase transition from trititanate to hexatitanate is a step‐by‐step slipping process of the TiO₆ octahedral slabs with the loss of sodium cations, and a new phase with formula Na_1.5H_0.5Ti₃O₇ has been discovered as an intermediate phase to interlink Na₂Ti₃O₇ and Na₂Ti₆O₁₃. Copyright © 2010 John Wiley & Sons, Ltd.     

A Raman spectroscopic study on the active site of sodium cations in the structure of Na2Ti3O7 during the adsorption of Sr2+ and Ba2+ cations

A detailed study on the structural deformation of trititanate nanofibers after the adsorption of divalent strontium (Sr) and barium (Ba) cations was conducted by using Raman spectroscopy, X‐ray diffraction (XRD) and transmission electron microscopy (TEM). It was found that the Raman bands at 309 cm⁻¹ corresponding to very long Ti O bonds (2.2 Å) and at 883 cm⁻¹ corresponding to the very short Ti O bonds (1.7 Å) decreased in intensity after the adsorption of Ba²⁺ and Sr²⁺ cations. Additionally, the band at 922 cm⁻¹ corresponding to an intermediate length Ti O bond was observed to weaken with the adsorption of divalent cations, indicating that the TiO₆ octahedra in Na₂Ti₃O₇ are more regular. These results suggest that the active sodium (Na⁺) cations in Na₂Ti₃O₇ should be located at the corner of the TiO₆ octahedral slabs, i.e. the plane (003). This was further confirmed by a large decrease of diffraction intensity of the plane (003) observed in the XRD pattern. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the selenite mineral mandarinoite Fe2Se3O9·6H2O

Selenites and tellurites may be subdivided according to formula and structure. There are five groups, based upon the formulae (a) A(XO₃), (b) A(XO₃·) xH₂O, (c) A₂(XO₃)₃·xH₂O, (d) A₂(X₂O₅) and (e) A(X₃O₈). Of the selenites, molybdomenite is an example of type (a); chalcomenite, clinochalcomenite, cobaltomenite and ahlfeldite are minerals of type (b); mandarinoite Fe₂Se₃O₉·6H₂O is an example of type (c). Raman spectroscopy has been used to characterise the mineral mandarinoite. The intense, sharp band at 814 cm⁻¹ is assigned to the symmetric stretching (Se₃O₉)⁶⁻ units. Three Raman bands observed at 695, 723 and 744 cm⁻¹ are attributed to the ν₃ (Se₃O₉)⁶⁻ anti‐symmetric stretching modes. Raman bands at 355, 398 and 474 cm⁻¹ are assigned to the ν₄ and ν₂ bending modes. Raman bands are observed at 2796, 2926, 3046, 3189 and 3507 cm⁻¹ and are assigned to OH stretching vibrations. The observation of multiple OH stretching vibrations suggests the non‐equivalence of water in the mandarinoite structure. The use of the Libowitzky empirical function provides hydrogen bond distances of 2.633(9) Å (2926 cm⁻¹), 2.660(0) Å (3046 cm⁻¹), 2.700(0) Å (3189 cm⁻¹) and 2.905(3) Å (3507 cm⁻¹). The sharp, intense band at 3507 cm⁻¹ may be due to hydroxyl units. It is probable that some of the selenite units have been replaced by hydroxyl units. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the tellurite minerals: graemite CuTeO3·H2O and teineite CuTeO3·2H2O

Tellurites may be subdivided according to formula and structure. There are five groups based upon the formulae (a) A(XO₃), (b) A(XO₃)·xH₂O, (c) A₂(XO₃)₃·xH₂O, (d) A₂(X₂O₅) and (e) A(X₃O₈). Raman spectroscopy has been used to study the tellurite minerals teineite and graemite; both contain water as an essential element of their stability. The tellurite ion should show a maximum of six bands. The free tellurite ion will have C_3v symmetry and four modes, 2A₁ and 2 E. Raman bands for teineite at 739 and 778 cm⁻¹ and for graemite at 768 and 793 cm⁻¹ are assigned to the ν₁ (TeO₃)²⁻ symmetric stretching mode while bands at 667 and 701 cm⁻¹ for teineite and 676 and 708 cm⁻¹ for graemite are attributed to the ν₃ (TeO₃)²⁻ antisymmetric stretching mode. The intense Raman band at 509 cm⁻¹ for both teineite and graemite is assigned to the water librational mode. Raman bands for teineite at 318 and 347 cm⁻¹ are assigned to the (TeO₃)²⁻ν₂(A₁) bending mode and the two bands for teineite at 384 and 458 cm⁻¹ may be assigned to the (TeO₃)²⁻ν₄(E) bending mode. Prominent Raman bands, observed at 2286, 2854, 3040 and 3495 cm⁻¹, are attributed to OH stretching vibrations. The values for these OH stretching vibrations provide hydrogen bond distances of 2.550(6) Å (2341 cm⁻¹), 2.610(3) Å (2796 cm⁻¹) and 2.623(2) Å (2870 cm⁻¹) which are comparatively short for secondary minerals. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the selenite mineral: ahlfeldite,NiSeO3·2H2O

Raman spectroscopy has been used to study the selenite mineral ahlfeldite. A comparison is made with the Raman spectra of chalcomenite, cobaltomenite and clinochalcomenite. Selenite minerals are characterised by the position of the symmetric stretching mode which is observed at higher wavenumbers than the anti‐symmetric stretching mode. The selenite ion has C_3v symmetry and four modes, 2A₁ and 2E. These modes are observed at 813, 472 cm⁻¹ (A₁) and 685, 710, 727 and 367 and 396 cm⁻¹ (E). Bands assigned to the water stretching vibrations are observed for ahlfeldite at 3385 cm⁻¹, for chalcomenite at 2953, 3184 and 3506 cm⁻¹ and for clinochalcomenite at 2909, 3193 and 3507 cm⁻¹. A comparison of the Raman spectra of chalcomenite, clinochalcomenite and cobaltomenite is made. The position of these bands enabled hydrogen bond distances in the selenite structure to be estimated. Hydrogen bond distances for ahlfeldite, chalcomenite and clinochalcomenite were determined to be similar. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the selenite minerals—chalcomenite CuSeO3·2H2O,clinochalcomenite and cobaltomenite

Raman spectroscopy has been used to study the dimorphous selenite minerals chalcomenite, cobaltomenite and clinochalcomenite. Selenite minerals are characterised by the position of the symmetric stretching mode that is observed at higher wavenumbers than the anti‐symmetric stretching mode. The selenite ion has C_3v symmetry and four modes, 2A₁ and 2E. These modes are observed at 813, 472 cm⁻¹ (A₁) and 685, 710, 727 and 367 and 396 cm⁻¹ (E). Bands assigned to the water stretching vibrations are observed for chalcomenite at 2953, 3184 and 3506 cm⁻¹ and for clinochalcomenite at 2909, 3193 and 3507 cm⁻¹. A comparison of the Raman spectra of chalcomenite, clinochalcomenite and cobaltomenite is made. The position of these bands enabled hydrogen bond distances in the selenite structure to be estimated. Hydrogen bond distances for chalcomenite and clinochalmenite were determined to be similar. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and Raman spectroscopic characterisation of the oxalate mineral wheatleyite Na2Cu2+(C2O4)2·2H2O

The mineral wheatleyite has been synthesised and characterised by Raman spectroscopy complimented with infrared spectroscopy. Two Raman bands at 1434 and 1470 cm⁻¹ are assigned to the ν_{(C O)} stretching mode and implies two independent oxalate anions. Two intense Raman bands observed at 904 and 860 cm⁻¹ are assigned to the ν(C C) stretching mode and support the concept of two non‐equivalent oxalate units in the wheatleyite structure. Two strong bands observed at 565 and 585 cm⁻¹ are assigned to the symmetric CCO in plane bending modes. The Raman band at 387 cm⁻¹ is attributed to the CuO stretching vibration and the bands at 127 and 173 cm⁻¹ to OCuO bending vibrations. A comparison is made with Raman spectra of selected natural oxalate bearing minerals. Oxalates are markers or indicators of environmental events. Oxalates are readily determined by Raman spectroscopy. Thus, deterioration of works of art, biogeochemical cycles, plant metal complexation, the presence of pigments and minerals formed in caves can be analysed. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the arsenite minerals leiteite ZnAs2O4, reinerite Zn3(AsO3)2 and cafarsite Ca5(Ti,Fe,Mn)7(AsO3)12·4H2O

The selected arsenite minerals leiteite, reinerite and cafarsite have been studied by Raman spectroscopy. Density functional theory (DFT) calculations enabled the position of the AsO₂²⁻ symmetric stretching mode at 839 cm⁻¹, the antisymmetric stretching mode at 813 cm⁻¹ and the deformation mode at 449 cm⁻¹ to be calculated. The Raman spectrum of leiteite shows bands at 804 and 763 cm⁻¹ assigned to the As₂O₄²⁻ symmetric and antisymmetric stretching modes. The most intense Raman band of leiteite is the band at 457 cm⁻¹ and is assigned to the ν₂ As₂O₄²⁻ bending mode. A comparison of the Raman spectrum of leiteite is made with the arsenite minerals reinerite and cafarsite. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the mixed anion mineral yecoraite Bi5Fe3O9(Te4+O3)(Te6+O4)2·9H2O

Tellurates are rare minerals as the tellurate anion is readily reduced to the tellurite ion. Often minerals with both tellurate and tellurite anions are found. An example of such a mineral containing tellurate and tellurite is yecoraite. Raman spectroscopy has been used to study this mineral, the exact structure of which is unknown. Two Raman bands at 796 and 808 cm⁻¹ are assigned to the ν₁(TeO₄)²⁻ symmetric and ν₃(TeO₃)²⁻ antisymmetric stretching modes and Raman bands at 699 cm⁻¹ are attributed to the ν₃(TeO₄)²⁻ antisymmetric stretching mode and the band at 690 cm⁻¹ to the ν₁(TeO₃)²⁻ symmetric stretching mode. The intense band at 465 cm⁻¹ with a shoulder at 470 cm⁻¹ is assigned the (TeO₄)²⁻ and (TeO₃)²⁻ bending modes. Prominent Raman bands are observed at 2878, 2936, 3180 and 3400 cm⁻¹. The band at 3936 cm⁻¹ appears quite distinct and the observation of multiple bands indicates the water molecules in the yecoraite structure are not equivalent. The values for the OH stretching vibrations listed provide hydrogen bond distances of 2.625 Å (2878 cm⁻¹), 2.636 Å (2936 cm⁻¹), 2.697 Å (3180 cm⁻¹) and 2.798 Å (3400 cm⁻¹). This range of hydrogen bonding contributes to the stability of the mineral. A comparison of the Raman spectra of yecoraite with that of tellurate containing minerals kuranakhite, tlapallite and xocomecatlite is made. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the uranyl mineral metauranospinite Ca[(UO2)(AsO4)]2·8H2O

Raman spectra of metauranospinite Ca[(UO₂)(AsO₄)]₂·8H₂O complemented with infrared spectra were studied. Observed bands were assigned to the stretching and bending vibrations of (UO₂)²⁺ and (AsO₄)³⁻ units and of water molecules. U O bond lengths in uranyl and O H···O hydrogen bond lengths were calculated from the Raman and infrared spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the antimonate mineral brandholzite Mg[Sb2(OH)12]·6H2O

Raman spectra of brandholzite Mg[Sb₂(OH)₁₂]·6H₂O were studied, complemented with infrared spectra, and related to the structure of the mineral. An intense Raman sharp band at 618 cm⁻¹ is attributed to the SbO symmetric stretching mode. The low‐intensity band at 730 cm⁻¹ is ascribed to the SbO antisymmetric stretching vibration. Low‐intensity Raman bands were found at 503, 526 and 578 cm⁻¹. Corresponding infrared bands were observed at 527, 600, 637, 693, 741 and 788 cm⁻¹. Four Raman bands observed at 1043, 1092, 1160 and 1189 cm⁻¹ and eight infrared bands at 963, 1027, 1055, 1075, 1108, 1128, 1156 and 1196 cm⁻¹ are assigned to δ SbOH deformation modes. A complex pattern resulting from the overlapping band of the water and hydroxyl units is observed. Raman bands are observed at 3240, 3383, 3466, 3483 and 3552 cm⁻¹; infrared bands at 3248, 3434 and 3565 cm⁻¹. The Raman bands at 3240 and 3383 cm⁻¹ and the infrared band at 3248 cm⁻¹ are assigned to water‐stretching vibrations. The two higher wavenumber Raman bands observed at 3466 and 3552 cm⁻¹ and two infrared bands at 3434 and 3565 cm⁻¹ are assigned to the stretching vibrations of the hydroxyl units. Observed Raman and infrared bands in the OH stretching region are associated with O‐H···O hydrogen bonds and their lengths 2.72, 2.79, 2.86, 2.88 and 3.0 Å (Raman) and 2.73, 2.83 and 3.07 Å (infrared). Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the uranyl mineral,compreignacite, K2[(UO2)3O2(OH)3]2·7H2O

Raman spectra of the uranyl oxyhydroxy‐hydrated mineral compreignacite, K₂[(UO₂)₃O₂(OH)₃]₂·7H₂O, were measured and interpreted. Observed bands were attributed to the stretching and bending vibrations of uranyl units, molecular water and hydroxyl ions. U O bond lengths in uranyl and O HO hydrogen bond lengths were inferred from the spectra and compared with those from the X‐ray single crystal structure data. The importance of this spectroscopic study rests with the ability to analyze very small amounts of the mineral. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the tellurite minerals: emmonsite Fe23+Te34+O9·2H2O and zemannite Mg0.5[Zn2+Fe3+(TeO3)3]4.5H2O

Raman spectroscopy has been used to study zemannite Mg_0.5[Zn²⁺Fe³⁺(TeO₃)₃]4.5H₂O and emmonsite Fe₂³⁺Te₃⁴⁺O₉·2H₂O. Raman bands for zemannite and emmonsite, observed at 740 and 650 cm⁻¹ and at 764 and 788 cm⁻¹, respectively, are attributed to the ν₁ (TeO₃)²⁻ symmetric stretching mode. The splitting of the symmetric stretching mode for emmonsite is in harmony with the results of X‐ray crystallography which shows three non‐equivalent TeO₃ units in the crystal structure. Two bands at 658 and 688 cm⁻¹ are assigned to ν₃ (TeO₃)²⁻ anti‐symmetric stretching modes. Raman bands observed at 372 and 408 cm⁻¹ for zemannite and 397 and 414 cm⁻¹ for emmonsite are attributed to the (TeO₃)²⁻ν₂(A₁) bending mode. The two Raman bands at 400 and 440 cm⁻¹ for emmonsite are ascribed to the ν₄(E) bending modes, while the band at 326 cm⁻¹ is due to the ν₂(A₁) bending vibration. Copyright © 2008 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of copiapites Fe2+Fe3+(SO4)6(OH)2 · 20H2O: environmental implications

Raman spectroscopy has been used to study selected mineral samples of the copiapite group. Copiapite (Fe²⁺Fe³⁺(SO₄)₆(OH)₂ · 20H₂O) is a secondary mineral formed through the oxidation of pyrite. Minerals of the copiapite group have the general formula AFe₄(SO₄)₆(OH)₂ · 20H₂O, where A has a + 2 charge and can be either magnesium, iron, copper, calcium and/or zinc. The formula can also be B_2/3Fe₄(SO₄)₆(OH)₂ · 20H₂O, where B has a + 3 charge and may be either aluminium or iron. For each mineral, two Raman bands are observed at around 992 and 1029 cm⁻¹, assigned to the (SO₄)²⁻ν₁ symmetric stretching mode. The observation of two bands provides evidence for the existence of two non‐equivalent sulfate anions in the mineral structure. Three Raman bands at 1112, 1142 and 1161 cm⁻¹ are observed in the Raman spectrum of copiapites, indicating a reduction of symmetry of the sulfate anion in the copiapite structure. This reduction in symmetry is supported by multiple bands in the ν₂ and ν₄(SO₄)²⁻ spectral regions. Copyright © 2010 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of bukovskýite Fe2(AsO4)(SO4)(OH)· 7H2O,a mineral phase with a significant role in arsenic migration

The Raman spectrum of bukovskýite [Fe³⁺₂(OH)(SO₄)(AsO₄)· 7H₂O] has been studied and compared with that of an amorphous gel containing specifically Fe, As and S, which is understood to be an intermediate product in the formation of bukovskýite. The observed bands are assigned to the stretching and bending vibrations of (SO₄)²⁻ and (AsO₄)³⁻ units, stretching and bending vibrations and vibrational modes of hydrogen‐bonded water molecules, stretching and bending vibrations of hydrogen‐bonded (OH)⁻ ions and Fe³⁺ (O,OH) units. The approximate range of O H···O hydrogen bond lengths was inferred from the Raman spectra. Raman spectra of crystalline bukovskýite and of the amorphous gel differ in that the bukovskýite spectrum is more complex, the observed bands are sharp and the degenerate bands of (SO₄)²⁻ and (AsO₄)³⁻ are split and more intense. Lower wavenumbers of δ H₂O bending vibrations in the spectrum of the amorphous gel may indicate the presence of weaker hydrogen bonds compared to those in bukovskýite. Copyright © 2011 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of the ‘cave’ mineral ardealite Ca2(HPO4)(SO4)·4H2O

The mineral ardealite Ca₂(HPO₄)(SO₄)·4H₂O is a ‘cave’ mineral and is formed through the reaction of calcite with bat guano. The mineral shows disorder and the composition varies depending on the origin of the mineral. Raman spectroscopy complimented with infrared spectroscopy has been used to characterise the mineral ardealite. The Raman spectrum is very different from that of gypsum. Bands are assigned to SO₄²⁻ and HPO₄²⁻ stretching and bending modes. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the phosphate mineral churchite‐(Y) YPO4·2H2O

Raman spectroscopy has been used to study the rare‐earth mineral churchite‐(Y) of formula (Y,REE)(PO₄) ·2H₂O, where rare‐earth element (REE) is a rare‐earth element. The mineral contains yttrium and, depending on the locality, a range of rare‐earth metals. The Raman spectra of two churchite‐(Y) mineral samples from Jáchymov and Medvědín in the Czech Republic were compared with the Raman spectra of churchite‐(Y) downloaded from the RRUFF data base. The Raman spectra of churchite‐(Y) are characterized by an intense sharp band at 975 cm⁻¹ assigned to the ν₁ (PO₄³⁻) symmetric stretching mode. A lower intensity band observed at around 1065 cm⁻¹ is attributed to the ν₃ (PO₄³⁻) antisymmetric stretching mode. The (PO₄³⁻) bending modes are observed at 497 cm⁻¹ (ν₂) and 563 cm⁻¹ (ν₄). Some small differences in the band positions between the four churchite‐(Y) samples from four different localities were found. These differences may be ascribed to the different compositions of the churchite‐(Y) minerals. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the antimonate mineral lewisite (Ca,Fe, Na)2(Sb,Ti)2O6(O,OH)7

The mineral lewisite, (Ca, Fe, Na)₂(Sb, Ti)₂O₆(O, OH)₇, an antimony-bearing mineral, has been studied by Raman spectroscopy. A comparison is made with the Raman spectra of other minerals, including bindheimite, stibiconite, and roméite. The mineral lewisite is characterised by an intense sharp band at 517 cm^?1 with a shoulder at 507 cm^?1 assigned to SbO stretching modes. Raman bands of medium intensity for lewisite are observed at 300, 356, and 400 cm^?1. These bands are attributed to OSbO bending vibrations. Raman bands in the OH stretching region are observed at 3200, 3328, 3471 cm^?1, with a distinct shoulder at 3542 cm^?1. The latter is assigned to the stretching vibration of OH units. The first three bands are attributed to water stretching vibrations. The observation of bands in the 3200–3500 cm^?1 region suggests that water is involved in the lewisite structure. If this is the case then the formula may be better written as (Ca, Fe²⁺, Na)₂(Sb, Ti)₂(O, OH)₇ xH₂O.     

Raman spectroscopic study of the uranyl mineral natrouranospinite (Na2,Ca)[(UO2)(AsO4)]2· 5H2O

Raman spectra of natrouranospinite complemented with infrared spectra were studied and related to the structure of the mineral. Observed bands were assigned to the stretching and bending vibrations of (UO₂)²⁺ and (AsO₄)³⁻ units and of water molecules. U O bond lengths in uranyl and O H···O hydrogen bond lengths were calculated from the Raman and infrared spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Raman spectroscopic characterisation of hydrotalcites based on the formula Ca6Al2(CO3)(OH)16· 4H2O

We have successfully synthesised hydrotalcites (HTs) containing calcium, which are naturally occurring minerals. Insight into the unique structure of HTs has been obtained using a combination of X‐ray diffraction (XRD) as well as infrared and Raman spectroscopies. Calcium‐containing hydrotalcites (Ca‐HTs) of the formula Ca₄Al₂(CO₃)(OH)₁₂·4H₂O (2:1 Ca‐HT) to Ca₈Al₂(CO₃)(OH)₂₀· 4H₂O (4:1 Ca‐HT) have been successfully synthesised and characterised by XRD and Raman spectroscopy. XRD has shown that 3:1 calcium HTs have the largest interlayer distance. Raman spectroscopy complemented with selected infrared data has been used to characterise the synthesised Ca‐HTs. The Raman bands observed at around 1086 and 1077 cm⁻¹ were attributed to the ν₁ symmetric stretching modes of the (CO₃²⁻) units of calcite and carbonate intercalated into the HT interlayer. The corresponding ν₃ CO₃²⁻ antisymmetric stretching modes are found at around 1410 and 1475 cm⁻¹. Copyright © 2010 John Wiley & Sons, Ltd.