Iron‐Catalyzed Aminomethyloxygenative Cyclization of Hydroxy‐α‐diazoesters with N,O‐Aminals

A new and efficient cyclization reaction has been developed to synthesize cyclic α,α‐disubstituted β‐amino esters via iron‐catalyzed intramolecular aminomethyloxygenative cyclization of diazo compounds with N,O‐aminal under mild reaction conditions. A broad range of hydroxy‐α‐diazoesters with different substituents and various N,O‐aminals were compatible with this protocol, affording the corresponding α,α‐disubstituted β‐amino esters bearing a five‐ to eight‐membered oxacycle in good yields.     

Aminated PCL‐based copolymers by chemical modification of poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone)

A novel method is proposed to access to new poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) using poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone) as polymeric substrate. First, ring‐opening (co)polymerizations of α‐iodo‐ε‐caprolactone (αIεCL) with ε‐caprolactone (εCL) are performed using tin 2‐ethylhexanoate (Sn(Oct)₂) as catalyst. (Co)polymers are fully characterized by ¹H NMR, ¹³C NMR, FTIR, SEC, DSC, and TGA. Then, these iodinated polyesters are used as polymeric substrates to access to poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) by two different strategies. The first one is the reaction of poly(αIεCL‐co‐εCL) with ammonia, the second one is the reduction of poly(αN₃εCL‐co‐εCL) by hydrogenolysis. This poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) (F_αNH2εCL < 0.1) opens the way to new cationic and water‐soluble PCL‐based degradable polyesters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6104–6115, 2009     

Near‐monodisperse α‐hydroxy and α,ω‐dihydroxy amine‐based polymers: Synthesis and characterization

α‐Hydroxy and α,ω‐dihydroxy polymers of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) of various molecular weights were synthesized by group transfer polymerization (GTP) in tetrahydrofuran (THF), using 1‐methoxy‐1‐(trimethylsiloxy)‐2‐methyl propene (MTS) as the initiator and tetrabutylammonium bibenzoate (TBABB) as the catalyst. The hydroxyl groups were introduced by adding one 2‐(trimethylsiloxy) ethyl methacrylate (TMSEMA) unit at one or at both ends of the polymer chain. The ends were converted to 2‐hydroxyethyl methacrylate (HEMA) units after the polymerization by acid‐catalyzed hydrolysis. Gel permeation chromatography (GPC) in THF and proton nuclear magnetic resonance (¹H‐NMR) spectroscopy in CDCl₃ were used to determine the molecular weight and composition of the polymers. These mono‐ and difunctional methacrylate polymers can be covalently linked at the hydroxy termini to form star polymers and model networks, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1597–1607, 1999     

Silica gel and polystyrene supported aluminum chloride as heterogeneous catalysts for the preparation of α‐aminophosphonates

Silica gel supported aluminum chloride (SiO₂‐AlCl₃) and cross‐linked polystyrene‐supported aluminum chloride (PS‐AlCl₃) are environment‐ friendly heterogeneous catalysts for the condensation of amines and aldehydes with diethyl phosphite to afford α‐aminophosphonates. These solid acid catalysts are stable (as bench top catalysts) and can be easily recovered and reused without appreciable change in their efficiency. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:418–422, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20629     

Engineered L‐Serine Hydroxymethyltransferase from Streptococcus thermophilus for the Synthesis of α,α‐Dialkyl‐α‐Amino Acids

α,α‐Disubstituted α‐amino acids are central to biotechnological and biomedical chemical processes for their own sake and as substructures of biologically active molecules for diverse biomedical applications. Structurally, these compounds contain a quaternary stereocenter, which is particularly challenging for stereoselective synthesis. The pyridoxal‐5′‐phosphate (PLP)‐dependent L ‐serine hydroxymethyltransferase from Streptococcus thermophilus (SHMT_Sth; EC 2.1.2.1) was engineered to achieve the stereoselective synthesis of a broad structural variety of α,α‐dialkyl‐α‐amino acids. This was accomplished by the formation of quaternary stereocenters through aldol addition of the amino acids D ‐Ala and D ‐Ser to a wide acceptor scope catalyzed by the minimalist SHMT_Sth Y55T variant overcoming the limitation of the native enzyme for Gly. The SHMT_Sth Y55T variant tolerates aromatic and aliphatic aldehydes as well as hydroxy‐ and nitrogen‐containing aldehydes as acceptors.     

N‐(tert‐Butoxycarbonyl)‐α‐aminoisobutyryl‐α‐aminoisobutyric acid methyl ester: two polymorphic forms in the space group P21/n

The title compound (systematic name: methyl 2‐{2‐[(tert‐butoxycarbonyl)amino]‐2‐methylpropanamido}‐2‐methylpropanoate), C₁₄H₂₆N₂O₅, (I), crystallizes in the monoclinic space group P2₁/n in two polymorphic forms, each with one molecule in the asymmetric unit. The molecular conformation is essentially the same in both polymorphs, with the α‐aminoisobutyric acid (Aib) residues adopting ϕ and ψ values characteristic of α‐helical and mixed 3₁₀‐ and α‐helical conformations. The helical handedness of the C‐terminal residue (Aib2) is opposite to that of the N‐terminal residue (Aib1). In contrast to (I), the closely related peptide Boc‐Aib‐Aib‐OBn (Boc is tert‐butoxycarbonyl and Bn is benzyl) adopts an α_L‐P_II backbone conformation (or the mirror image conformation). Compound (I) forms hydrogen‐bonded parallel β‐sheet‐like tapes, with the carbonyl groups of Aib1 and Aib2 acting as hydrogen‐bond acceptors. This seems to represent an unusual packing for a protected dipeptide containing at least one α,α‐disubstituted residue.     

Differentiation of Boc‐protected α,δ‐/δ,α‐ and β,δ‐/δ,β‐hybrid peptide positional isomers by electrospray ionization tandem mass spectrometry

Two new series of Boc‐N‐α,δ‐/δ,α‐ and β,δ‐/δ,β‐hybrid peptides containing repeats of L ‐Ala‐δ⁵‐Caa/δ⁵‐Caa‐L ‐Ala and β³‐Caa‐δ⁵‐Caa/δ⁵‐Caa‐β³‐Caa (L ‐Ala = L ‐alanine, Caa = C‐linked carbo amino acid derived from D ‐xylose) have been differentiated by both positive and negative ion electrospray ionization (ESI) ion trap tandem mass spectrometry (MS/MS). MSⁿ spectra of protonated isomeric peptides produce characteristic fragmentation involving the peptide backbone, the Boc‐group, and the side chain. The dipeptide positional isomers are differentiated by the collision‐induced dissociation (CID) of the protonated peptides. The loss of 2‐methylprop‐1‐ene is more pronounced for Boc‐NH‐L ‐Ala‐δ‐Caa‐OCH₃ (1), whereas it is totally absent for its positional isomer Boc‐NH‐δ‐Caa‐L ‐Ala‐OCH₃ (7), instead it shows significant loss of t‐butanol. On the other hand, second isomeric pair shows significant loss of t‐butanol and loss of acetone for Boc‐NH‐δ‐Caa‐β‐Caa‐OCH₃ (18), whereas these are insignificant for its positional isomer Boc‐NH‐β‐Caa‐δ‐Caa‐OCH₃ (13). The tetra‐ and hexapeptide positional isomers also show significant differences in MS² and MS³ CID spectra. It is observed that ‘b’ ions are abundant when oxazolone structures are formed through five‐membered cyclic transition state and cyclization process for larger ‘b’ ions led to its insignificant abundance. However, b₁⁺ ion is formed in case of δ,α‐dipeptide that may have a six‐membered substituted piperidone ion structure. Furthermore, ESI negative ion MS/MS has also been found to be useful for differentiating these isomeric peptide acids. Thus, the results of MS/MS of pairs of di‐, tetra‐, and hexapeptide positional isomers provide peptide sequencing information and distinguish the positional isomers. Copyright © 2010 John Wiley & Sons, Ltd.     

Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001     

21α‐Fluoro‐7‐norvouacapane‐17β,21α‐lactone

The crystal structure of 21α‐fluoro‐7‐norvouacapane‐17β,21α‐lactone, C₂₀H₂₅FO₃, a new synthetic derivative of the diterpenoid 6α,7β‐di­hydroxy­vouacapan‐17β‐oic acid isolated from Pterodon polygalaeflorus Benth fruits, is described.     

Amino acid‐based bioanalogous polymers. Synthesis,and study of regular poly(ester amide)s based on bis(α‐amino acid) α,ω‐alkylene diesters,and aliphatic dicarboxylic acids

The purpose of this research was to synthesize new regular poly(ester amide)s (PEAs) consisting of nontoxic building blocks like hydrophobic α‐amino acids, α,ω‐diols, and aliphatic dicarboxylic acids, and to examine the effects of the structure of these building block components on some physico‐chemical and biochemical properties of the polymers. PEAs were prepared by solution polycondensation of di‐p‐toluenesulfonic acid salts of bis‐(α‐amino acid) α,ω‐alkylene diesters and di‐p‐nitrophenyl esters of diacids. Optimal conditions of this reaction have been studied. High molecular weight PEAs (M_w = 24,000–167,000) with narrow polydispersity (M_w/M_n = 1.20–1.81) were prepared under the optimal reaction conditions and exhibited excellent film‐forming properties. PEAs obtained are mostly amorphous materials with T_g from 11 to 59°C. α‐Chymotrypsin catalyzed in vitro hydrolysis of these new PEA substrates was studied to assess the effect of the building blocks of these new polymers on their biodegradation properties. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 391–407, 1999     

Microwave‐assisted synthesis of α‐hydroxy‐benzylphosphonates and ‐benzylphosphine oxides

A series of α‐hydroxy‐benzylphosph‐ onates and ‐benzylphosphine oxides was synthesized by the Na₂CO₃‐catalyzed microwave‐assisted addition of dialkyl phosphites and dipenylphosphine oxide to P‐substituted benzaldehydes. The solventless reaction provided the products in short reaction times and in 71–88% yield. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:15–17, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20649     

Reactions of 3‐methylamino‐5‐phenylthiophene with α,β‐unsaturated esters and α,β‐unsaturated nitriles

Treatment of 3‐methylamino‐5‐phenylthiophene with α,β‐unsaturated esters, i.e., methyl acrylate, (E)‐methyl crotonate, diethyl fumarate, diethyl maleate and ethyl propiolate, in tetrahydrofuran for several days at reflux gave 1‐methyl‐3,4‐dihydrothieno[2,3‐e]pyridin‐2‐ones 4 and/or 1‐methylthieno[2,3‐e]pyridin‐2‐ones 5 , depending on the structure of the esters. On the other hand, the same reactions with α,β‐unsaturated nitriles such as acrylonitrile and tetracyanoethene, gave the corresponding thiophenes 7 and 10 bearing 2‐cyanoethyl and 1,2,2‐tricyanoethenyl groups at C‐2, respectively. The reaction with (Z)‐1,2‐dicyanoethene under the same conditions produced the corresponding thiophene 9 bearing the 1,2‐dicyanoethenyl group and 1,2‐dicyano‐5‐methylaminobiphenyl.     

Catalytic Enantioselective Reaction of α‐Aminoacetonitriles Using Chiral Bis(imidazoline) Palladium Catalysts

The catalytic enantioselective reaction of diphenylmethylidene‐protected α‐aminoacetonitriles with imines has been developed. Good yields and diastereo‐ and enantioselectivities were observed for the reaction of various imines using chiral bis(imidazoline)/Pd catalysts. The reaction of α‐aminonitriles with di‐tert‐butyl azodicarboxylate afforded chiral α,α‐diaminonitriles in high yields with high enantioselectivities.     

An activated catalyst RhH(PPh3)4‐dppe‐ Me2S2 for α‐methylthiolaton of α‐phenyl ketones

In the presence of catalytic amounts of RhH(PPh₃)₄, 1,2‐bis(diphenylphosphino)ethane (dppe), and dimethyl disulfide, cyclic and acyclic α‐phenyl ketones reacted with p‐cyano‐α‐methylthioa‐ cetophenone giving α‐methylthio‐α‐phenylketones. The activated catalyst containing dimethyl disulfide was effective for the α‐methylthiolation reaction of these less reactive substrates. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:18–23, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20650     

One‐Handed Helical Screw Direction of Homopeptide Foldamer Exclusively Induced by Cyclic α‐Amino Acid Side‐Chain Chiral Centers

Chiral cyclic α,α‐disubstituted amino acids, (3S,4S)‐ and (3R,4R)‐1‐amino‐3,4‐(dialkoxy)cyclopentanecarboxylic acids ((S,S)‐ and (R,R)‐Ac₅c^dOR; R: methyl, methoxymethyl), were synthesized from dimethyl L ‐(+)‐ or D ‐(?)‐tartrate, and their homochiral homoligomers were prepared by solution‐phase methods. The preferred secondary structure of the (S,S)‐Ac₅c^dOMe hexapeptide was a left‐handed (M) 3₁₀ helix, whereas those of the (S,S)‐Ac₅c^dOMe octa‐ and decapeptides were left‐handed (M) α helices, both in solution and in the crystal state. The octa‐ and decapeptides can be well dissolved in pure water and are more α helical in water than in 2,2,2‐trifluoroethanol solution. The left‐handed (M) helices of the (S,S)‐Ac₅c^dOMe homochiral homopeptides were exclusively controlled by the side‐chain chiral centers, because the cyclic amino acid (S,S)‐Ac₅c^dOMe does not have an α‐carbon chiral center but has side‐chain γ‐carbon chiral centers.     

Fluorine in Peptides: The Synthesis of α‐Fluoro‐β‐Amino Dipeptides by Direct Deoxofluorination/Rearrangement of N‐Seryl Dipeptides

This article describes the stereo‐ and regioselectivity of the deoxofluorination of N‐terminal dipeptides bearing a serine residue to generate, after rearrangement, α‐fluoro‐β‐amine‐terminated dipeptides. The ratio of the rearranged α‐fluorinated regioisomer is increased, relative to the non‐rearranged β‐fluoro isomer, with N‐alkylated amides. Otherwise, an intramolecular H‐bond between the free amine and the amide NH suppresses formation of the key aziridinium intermediate required for α‐fluorination. N‐Methyl and N‐allyl amides give exclusively α‐fluorination products. Subsequent deprotection of the N‐allyl amide to give a α‐fluoro‐β‐amino dipeptide product is demonstrated.     

Palladium Catalysis Enables Benzylation of α,α‐Difluoroketone Enolates

A palladium‐catalyzed decarboxylative benzylation reaction of α,α‐difluoroketone enolates is reported, in which the key C(α)?C(sp³) bond is generated by reductive elimination from a palladium intermediate. The transformation provides convergent access to α‐benzyl‐α,α‐difluoroketone‐based products, and should be useful for accessing biological probes.     

16α,17α‐Epoxy‐20‐oxopregn‐5‐en‐3β‐yl acetate

The title compound, C₂₃H₃₂O₄, has a 3β configuration, with the epoxy O atom at 16α,17α. Rings A and C have slightly distorted chair conformations. Because of the presence of the C5=C6 double bond, ring B assumes an 8β,9α‐half‐chair conformation slightly distorted towards an 8β‐sofa. Ring D has a conformation close to a 14α‐envelope. The acetoxy and acetyl substituents are twisted with respect to the average molecular plane of the steroid. The conformation of the mol­ecule is compared with that given by a quantum chemistry calculation using the RHF–AM1 (RHF = Roothaan Hartree–Fock) Hamiltonian model. Cohesion of the crystal can be attributed to van der Waals interactions and weak intermolecular C—H?O interactions, which link the mol­ecules head‐to‐tail along [101].     

Oxidative acylation of α,α‐diarylallylic alcohols: Synthesis of 1,2,4‐triarylbutane‐1,4‐diones

A metal‐free mediated oxidative acylation of α,α‐diarylallylic alcohols with simple aromatic aldehydes for the synthesis of 1,2,4‐triphenylbutane‐1,4‐diones is presented. In the presence of TBPB (tert‐butyl peroxybenzoate), desired products were obtained in good to excellent yields for 28 examples. This protocol features high regioselectivity, wide functional group tolerance and atom economy.     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860