Silica gel and polystyrene supported aluminum chloride as heterogeneous catalysts for the preparation of α‐aminophosphonates

Silica gel supported aluminum chloride (SiO₂‐AlCl₃) and cross‐linked polystyrene‐supported aluminum chloride (PS‐AlCl₃) are environment‐ friendly heterogeneous catalysts for the condensation of amines and aldehydes with diethyl phosphite to afford α‐aminophosphonates. These solid acid catalysts are stable (as bench top catalysts) and can be easily recovered and reused without appreciable change in their efficiency. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:418–422, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20629     

Molybdenum‐ and Tungsten‐Based Coordination Polymers as Catalysts for an Efficient and Rapid Synthesis of Hexahydro‐5‐oxoquinoline‐3‐carboxylates and 1,4‐Dihydropyridine‐3,5‐dicarboxylates

Hexahydro‐5‐oxoquinoline‐3‐carboxylates and 1,4‐dihydropyridine‐3,5‐dicarboxylates were synthesized efficiently and rapidly (2 min) in the presence of molybdenum‐ and tungsten‐based coordination polymers [M(Bu₃Sn)₂O₄)]_n (M=Mo or W) as catalysts (Schemes 1 and 2; Tables 2 and 3). The products were formed at room temperature in excellent yields (90–98%). The catalysts worked under heterogeneous conditions and were recyclable. The earlier reports for the application of these polymers to conduct organic synthesis are limited. The present method explores a new and useful application of these catalysts.     

Cu‐free Sonogashira Type Cross‐Coupling of 6‐Halo‐2‐cyclopropyl‐3‐(pyridyl‐3‐ylmethyl) Quinazolin‐4(3H)‐ones as Potential Antimicrobial Agents

C(sp)–C(sp2) bond formation via Sonogashira cross‐coupling reactions on 6‐halo‐2‐cyclopropyl‐3‐(pyridyl‐3‐ylmethyl)quinazolin‐4(3H )‐ones with appropriate alkynes was explored. Optimization of reaction conditions with various catalysts, ligands, bases, and solvents was conducted. The combination of PdCl₂(MeCN)₂ with X‐Phos proved to be the best metal–ligand system for this conversion in the presence of triethylamine (Et₃N) in tetrahydrofuran at room temperature for iodosubstrates, at 80°C for the bromosubstrates in 8 h, and also for the chlorosubstrates in 16 h. We also demonstrated synthesis of a successful diversity‐oriented synthesis library of highly functionalized quinazolinones via Cu‐free Sonogashira coupling of diverse aryl halides and azido‐alkyne (“click”) ligation reactions with substituted azides. The library exhibited significant antimicrobial activity when screened against several microorganisms.     

Microwave‐assisted synthesis of α‐hydroxy‐benzylphosphonates and ‐benzylphosphine oxides

A series of α‐hydroxy‐benzylphosph‐ onates and ‐benzylphosphine oxides was synthesized by the Na₂CO₃‐catalyzed microwave‐assisted addition of dialkyl phosphites and dipenylphosphine oxide to P‐substituted benzaldehydes. The solventless reaction provided the products in short reaction times and in 71–88% yield. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:15–17, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20649     

Nano‐MoO3‐modified MCM‐22 for methane dehydroaromatization

The work reported was aimed at a simple method to improve the catalytic activity of Mo/HMCM‐22 in methane aromatization. The catalysts were characterized using X‐ray diffraction, scanning electron microscopy, N₂ adsorption–desorption, NH₃ temperature‐programmed desorption, infrared spectra of pyridine adsorption, X‐ray photoelectron spectroscopy and thermogravimetric analysis. Physicochemical measurements indicated that Mo species with smaller size in HMCM‐22 would sublimate more easily and form Mo species at the atomic/molecular level and then interact well with the internal Brønsted acid sites to form Mo–O–Al active species. Catalytic results confirmed that nano‐MoO₃‐modified HMCM‐22 showed higher methane conversion and aromatics yield (13.1 versus 8.9%) than commercial MoO₃‐modified HMCM‐22 (11.0 versus 7.5%). In addition, nano‐MoO₃‐modified HMCM‐22 showed better durability compared with commercial MoO₃‐modified MCM‐22. Copyright © 2015 John Wiley & Sons, Ltd.     

Efficient conversion of fructose to 5‐hydroxymethylfurfural by functionalized γ‐Al2O3 beads

Millimeter size γ‐Al₂O₃ beads were prepared by alginate assisted sol–gel method and grafting organic groups with propyl sulfonic acid and alkyl groups as functionalized γ‐Al₂O₃ bead catalysts for fructose dehydration to 5‐hydroxymethylfurfural (5‐HMF). Experiment results showed that the porous structure of γ‐Al₂O₃ beads was favorable to the loading and dispersion of active components, and had an obvious effect on the properties of the catalyst. The lower calcination temperature of γ‐Al₂O₃ beads increased the specific surface area, the hydrophobicity and the activity of catalysts. Competition between the reaction of alkyl groups and ‐SH groups with surface hydroxyl during the preparation process of the catalyst influenced greatly the acid site densities, hydrophobic properties and activity of the catalyst. With an increase in the alkyl group chain, the hydrophobicity of catalysts increased obviously and the activity of the catalyst was enhanced. The most hydrophobic catalyst C₁₆‐SO₃H‐γ‐Al₂O₃–650°C exhibited the highest yield of 5‐HMF (84%) under the following reaction conditions: reaction medium of dimethylsulfoxide/H₂O (V/V, 4:1), catalyst amount of 30 mg, temperature of 110°C and reaction time of 4 hr.     

Computational studies on the reactions of 3‐butenyl and 3‐butenylperoxy radicals

The reactions of 3‐butenyl (^?CH₂CH₂CH?CH₂) radicals—unimolecular decomposition, isomerization, as well as reaction with O₂—and the subsequent unimolecular rearrangement reactions of the 3‐butenylperoxy radicals have been investigated and are compared to the analogous reactions of butyl (^?CH₂CH₂CH₂CH₃) and butylperoxy radicals using transition‐state theory based on the quantum chemical calculations at the CBS‐QB3 level. For alkyl‐analogue processes, the reactions of 3‐butenyl and 3‐butenylperoxy radicals can be well characterized by the decreased and increased bond dissociation energies at the allylic and vinylic sites, respectively. The intramolecular addition reactions of the radical center atoms to the double bonds were found to be important non‐alkyl‐analogue reactions of 3‐butenyl and 3‐butenylperoxy radicals. As a consequence, the thermal decomposition of 3‐butenyl radicals was found to be slower than that of butyl radicals by one order of magnitude at temperature near 1000 K. Intramolecular addition reactions are suggested to be the predominant unimolecular rearrangement processes of 3‐butenylperoxy radicals over the entire temperature range investigated (500–1200 K). The intramolecular addition reactions of the alkenyl peroxy radicals, which have not been included in combustion kinetic models, and their implications for the autoignition of alkenes are discussed. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 273–288, 2010     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

Synthesis and spectral characterization of N‐[2‐(4‐halophenoxy)‐3‐(3‐chlorophenyl)‐3, 4‐dihydro‐2H‐1,3,2‐λ5‐benzoxazaphosphinin‐2‐yliden]‐N‐substituted amines by the Staudinger reaction

The synthesis of the title compounds was accomplished in four steps. The synthetic route involves the preparation of Schiff's base by reacting salicylaldehyde with m‐chloroaniline in EtOH. The Schiff's base was then reduced with NaBH₄/MeOH. In the second step, PCl₃ was reacted with p‐chlorophenol/p‐bromophenol in THF in the presence of Et₃N to obtain P(III) dichloride derivatives. The reduced Schiff's base and dichloride derivatives were reacted in equimolar quantities in the presence of Et₃N in THF to get the cyclized product. Alkyl azides were prepared by reacting alkyl bromides with sodium azide, and then alkyl azides were treated with the cyclized product to obtain the title compounds. The structure of these novel compounds was elucidated by elemental analysis, IR, ¹H, ¹³C, ³¹P NMR, and mass spectroscopy. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:499–504, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20639     

Co‐crystals of 3‐deoxy‐3‐fluoro‐α‐d‐glucopyranose and 3‐deoxy‐3‐fluoro‐β‐d‐glucopyranose

3‐Deoxy‐3‐fluoro‐d ‐glucopyranose crystallizes from acetone to give a unit cell containing two crystallographically independent molecules. One of these molecules (at site A) is structurally homogeneous and corresponds to 3‐deoxy‐3‐fluoro‐β‐d ‐glucopyranose, C₆H₁₁FO₅, (I). The second molecule (at site B) is structurally heterogeneous and corresponds to a mixture of (I) and 3‐deoxy‐3‐fluoro‐α‐d ‐glucopyranose, (II); treatment of the diffraction data using partial‐occupancy oxygen at the anomeric center gave a high‐quality packing model with an occupancy ratio of 0.84:0.16 for (II):(I) at site B. The mixture of α‐ and β‐anomers at site B appears to be accommodated in the lattice because hydrogen‐bonding partners are present to hydrogen bond to the anomeric OH group in either an axial or equatorial orientation. Cremer–Pople analysis of (I) and (II) shows the pyranosyl ring of (II) to be slightly more distorted than that of (I) [θ_(I) = 3.85 (15)° and θ_(II) = 6.35 (16)°], but the general direction of distortion is similar in both structures [ϕ_(I) = 67 (2)° (B_C1,C4) and ϕ_(II) = 26.0 (15)° (^C3TB_C1); B = boat conformation and TB = twist‐boat conformation]. The exocyclic hydroxymethyl (–CH₂OH) conformation is gg (gauche–gauche) (H5 anti to O6) in both (I) and (II). Structural comparisons of (I) and (II) to related unsubstituted, deoxy and fluorine‐substituted monosaccharides show that the gluco ring can assume a wide range of distorted chair structures in the crystalline state depending on ring substitution patterns.     

Visible‐Light‐Promoted Dearomative Fluoroalkylation of β‐Naphthols through Intermolecular Charge Transfer

The first visible‐light‐promoted dearomative fluoroalkylation of β‐naphthols was realized without the assistance of any transition‐metal catalysts or external photosensitizers. Inexpensive fluoroalkyl iodides were directly used as efficient fluoroalkylation reagents under very mild reaction conditions. The scope of this process was found to be general and broad, and both trifluoromethyl and perfluoroalkyl groups (‐C₄F₉, ‐C₆F₁₃, and ‐C₈F₁₇) were installed in excellent yields. Preliminary mechanistic studies suggest that visible‐light‐promoted intermolecular charge transfer within the naphtholate–fluoroalkyl iodide electron donor–acceptor (EDA) complex induces a single electron transfer in the absence of photocatalysts.     

Long‐chain‐branched polyethene by the copolymerization of ethene and nonconjugated α,ω‐dienes

Ethene was copolymerized (1) with 1,5‐hexadiene with rac‐ethylenebis(indenyl)zirconium dichloride/methylaluminoxane (MAO) used as a catalyst and (2) with 1,7‐octadiene with bis(n‐butylcyclopentadienyl)zirconium dichloride/MAO and rac‐ethylenebis(indenyl)hafnium dichloride (Et[Ind]₂HfCl₂)/MAO used as catalysts at 80 °C in toluene. The copolymer microstructure and the influence of diene incorporation on the rheological properties were examined. Ethene and 1,5‐hexadiene formed a copolymer in which a major fraction of the 1,5‐hexadiene was incorporated into rings and a small fraction formed 1‐butenyl branches. The copolymerization of ethene with 1,7‐octadiene resulted in a higher selectivity toward branch formation. Some of the branches formed long‐chain‐branching (LCB) structures. The ring formation selectivity increased with decreasing ethene concentration in the polymerization reactor. Melt rheological properties of the diene copolymers resembled those of metallocene‐catalyzed LCB homopolyethenes and depended on the vinyl content, the catalyst, and the polymerization conditions. At high diene contents, all three catalysts produced crosslinked polyethene. This was especially pronounced with Et[Ind]₂HfCl₂, where only 0.2 mol % 1,7‐octadiene in the copolymer was required to achieve significantly modified rheological properties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3805–3817, 2001     

An activated catalyst RhH(PPh3)4‐dppe‐ Me2S2 for α‐methylthiolaton of α‐phenyl ketones

In the presence of catalytic amounts of RhH(PPh₃)₄, 1,2‐bis(diphenylphosphino)ethane (dppe), and dimethyl disulfide, cyclic and acyclic α‐phenyl ketones reacted with p‐cyano‐α‐methylthioa‐ cetophenone giving α‐methylthio‐α‐phenylketones. The activated catalyst containing dimethyl disulfide was effective for the α‐methylthiolation reaction of these less reactive substrates. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:18–23, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20650     

Association of hydrophobically α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) in water

The α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) (C_n‐POXZ‐C_n) have been synthesized by a one‐pot process using cationic ring‐opening polymerization with an appropriate initiator and terminating agent. The polymers bearing different alkyl groups C₁₂ and C₁₈ have molecular weight in the range of 2.4 × 10³ to 14 × 10³ with a small polydispersity index. The solution behavior of the free chains has been analyzed in a nonselective solvent, dichloromethane, by small‐angle neutron scattering and dynamic light scattering. These amphiphilic polymers associate in water to form flower‐like micellar structures. Critical micelle concentrations, investigated by fluorescence technique, are in the range of 0.03–0.5 g L^?1 and are dependent on the hydrophilic/lipophilic balance. The structural properties of the aggregates have also been investigated by viscometry. Intrinsic viscosities of these polymers are in the same range as that of the precursors poly(2‐methyl‐2‐oxazoline) (POXZ) and mono‐functionalized polymers. Large viscosity increase corresponding to intermicellar bridging was observed in the vicinity of the micelle overlap concentration. Addition of hydroxypropyl β‐cyclodextrin (HβCD) has dissociated the aggregates and the intrinsic viscosities of the HβCD‐end‐capped chains have become comparable with the ones of POXZ precursor chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2477–2485, 2010     

Substituted 4‐Oxo‐1,2,3,4‐tetrahydroquinoline‐3‐carboxylic Esters by a Tandem Imine Addition‐SNAr Reaction

A tandem imine addition‐S_NAr annulation reaction has been developed as a new approach to the synthesis of 4‐oxo‐1,2,3,4‐tetrahydroquinoline‐3‐carboxylic esters. A series of these structures has been generated by reacting selected imines with tert‐butyl 2‐fluoro‐5‐nitrobenzoylacetate. Structural variations in the final products are accomplished by changing the substituents on the imine and the alkyl group of the ester. The title compounds are isolated as their enols in 55–97% yield without the need for added base or catalysts. The synthesis of the starting materials as well as mechanistic studies and further synthetic conversions of the products are presented.     

CeCl3·7H2O‐catalyzed one‐pot Kabachnik–Fields reaction: A green protocol for three‐component synthesis of α‐aminophosphonates

CeCl₃·7H₂O has been utilized as an efficient Lewis acid catalyst for the three‐component coupling of aldehydes, aromatic amines, and diethylphosphite to produce α‐aminophosphonates under solvent‐free conditions. The advantages of this protocol are high yield, mild reaction conditions, less environmental pollution, and simple work‐up procedure. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:397–403, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20635     

Tacticity of poly‐α‐olefins from poly‐1‐hexene to poly‐1‐octadecene

A systematic study of the influence of the α‐olefin size, the catalyst stereospecificity and the reaction temperature was done on the catalytic activity and tacticity of poly‐α‐olefins from 1‐hexene to 1‐octadecene. The metallocenes used were rac‐Et[Ind₂]ZrCl₂ ( 1 ) and Me₂C[Cp(9‐Flu)]ZrCl₂ ( 2 ) to obtain isotactic and syndiotactic polyolefins. Some catalysts giving atactic polymers were also used in order to study all the possible ¹³C NMR pentades. Catalytic activities increased and isotacticity and syndiotacticity decreased with temperature, but no real trend was found with the α‐olefin size. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4744–4753, 2005     

Synthesis and characterization of poly(1,4‐bis((E)‐2‐(3‐dodecylthiophen‐2‐yl)vinyl)benzene) derivatives

New amorphous semiconducting copolymers, poly(9,9‐dialkylfluorene)‐alt‐(3‐dodecylthienyl‐divinylbenzene‐3‐dodecylthienyl) derivatives (PEFTVB and POFTVB), were designed, synthesized, and characterized. The structure of copolymers was confirmed by H NMR, IR, and elemental analysis. The copolymers showed very good solubility in organic solvents and high thermal stability with high T_g of 178–185 °C. The weight average molecular weight was found to be 107,900 with polydispersity of 3.14 for PEFTVB and 76,700 with that of 3.31 for POFTVB. UV–vis absorption studies showed the maximum absorption at 428 nm (in solution) and 435 nm (in film) for PEFTVB and at 430 nm (in solution) and 436 nm (in film) for POFTVB. Photoluminescence studies showed the emission at 498 nm (in solution) and 557 nm (in film) for PEFTVB and at 498 nm (in solution) and 536 nm (in film) for POFTVB. The solution‐processed thin‐film transistors showed the carrier mobility of 2 × 10^?4 cm² V^?1 s^?1 for PEFTVB‐based devices and 2 × 10^?5 cm² V^?1 s^?1 for POFTVB‐based devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3942–3949, 2010     

Homo‐ and copolymerization of ethylene and norbornene with bis(β‐diketiminato) titanium complexes activated with methylaluminoxane

Homo‐ and copolymerization of ethylene and norbornene were investigated with bis(β‐diketiminato) titanium complexes [ArNC(CR₃)CHC(CR₃)NAr]₂TiCl₂ (R = F, Ar = 2,6‐diisopropylphenyl 2a; R = F, Ar = 2,6‐dimethylphenyl 2b ; R = H, Ar = 2,6‐diisopropylphenyl 2c ; R = H, Ar = 2,6‐dimethylphenyl 2d) in the presence of methylaluminoxane (MAO). The influence of steric and electric effects of complexes on catalytic activity was evaluated. With MAO as cocatalyst, complexes 2a–d are moderately active catalysts for ethylene polymerization producing high‐molecular weight polyethylenes bearing linear structures, but low active catalysts for norbornene polymerization. Moreover, 2a – d are also active ethylene–norbornene (E–N) copolymerization catalysts. The incorporation of norbornene in the E–N copolymer could be controlled by varying the charged norbornene. ¹³C NMR analyses showed the microstructures of the E–N copolymers were predominantly alternated and isolated norbornene units in copolymer, dyad, and triad sequences of norbornene were detected in the E–N copolymers with high incorporated content of norbornene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 93–101, 2008     

Dehydrogenation of Isobutane to Isobutene with Carbon Dioxide over SBA‐15‐Supported Chromia‐Ceria Catalysts

A series of SBA‐15‐supported chromia‐ceria catalysts with 3% Cr and 1%–5% Ce (3Cr‐Ce/SBA) were prepared using an incipient wetness impregnation method. The catalysts were characterized by XRD, N₂ adsorption, SEM, TEM‐EDX, Raman spectroscopy, UV–vis spectroscopy, XPS and H₂‐TPR, and their catalytic performance for isobutane dehydrogenation with CO₂ was tested. The addition of ceria to SBA‐15‐supported chromia improves the dispersion of chromium species. 3Cr‐Ce/SBA catalysts are more active than SBA‐15‐supported chromia (3Cr/SBA), which is due to a higher concentration of Cr⁶⁺ species present on the former catalysts. The 3Cr‐3Ce/SBA catalyst shows the highest activity, which gives 35.4% isobutane conversion and 89.6% isobutene selectivity at 570 °C after 10 min of the reaction.