Raman spectra of nitrogen‐containing organic compounds obtained using a portable instrument at −15 °C at 2860 m above sea level

Well‐resolved Raman spectra of samples of nitrogen‐containing compounds were detected using a portable Raman instrument (Ahura First Defender XL) outdoors at a low ambient temperature of −15 °C and at an altitude of 2860 m (Pitztall, Austria). The portable Raman spectrometer tested here is equipped with a 785‐nm diode laser and a fixed frontal probe. Solid form of formamide, urea, 3‐methylpyridine, aniline, indene, 1‐(2‐aminoethyl)piperazine, indoline and benzofuran were detected unambiguously under high‐mountain field conditions. The main Raman features (strong, medium and partially weak bands) were observed at the correct wavenumber positions (with a spectral resolution 7–10 cm⁻¹) in the wavenumber range 200–1600 cm⁻¹. The results obtained demonstrate the possibility of employing a miniaturised Raman spectrometer as a key instrument for investigating the presence of nitrogen‐containing organic compounds and biomolecules outdoors under low temperature conditions. Within the payload designed by European Space Agency (ESA) and National Aeronautics and Space Administration (NASA) for future missions, focussing not only on Mars, Raman spectroscopy represents an important instrumentation for the detection of organic nitrogen‐containing compounds relevant to life detection on planetary surfaces or near sub‐surfaces. Copyright © 2009 John Wiley & Sons, Ltd.     

Fast detection of sulphate minerals (gypsum,anglesite, baryte) by a portable Raman spectrometer

Well‐resolved Raman spectra of gypsum, anglesite and baryte were detected using a portable Raman instrument (Ahura First Defender XL) in the laboratory and outdoor under atmospheric conditions. Spectra were obtained using a 785‐nm excitation. The portable spectrometers display generally lower spectral resolution compared with the laboratory confocal instrument but permit the fast, unambiguous detection of minerals under field conditions. Portable Raman instruments can be advocated as excellent tools for field geological, environmental as well as exobiological applications. A miniaturized Raman instrument will be included in the Pasteur analytical package of the ESA ExoMars mission and interesting research applications can now be proposed for in situ field planetary studies. Additionally, portable Raman instruments represent an ideal tool for demonstrating possible applications of Raman spectroscopic techniques outdoor. In geosciences this approach represents a new field which could completely change classical field work. Copyright © 2009 John Wiley & Sons, Ltd.     

Rapid detection of 2,2′,4,4′‐tetrabromodiphenyl ether (BDE‐47) using a portable Au‐colloid SERS sensor

In situ rapid detection and identification of polybrominated diphenyl ethers, a group of well‐known persistent organic pollutants, present a great challenge. To develop a portable and sensitive surface‐enhanced Raman scattering (SERS) sensor for rapid 2,2′,4,4′‐tetrabromodiphenyl ether (BDE‐47) detection, we adopted the most commonly used Au nanoparticles, which are effective in the analysis of hydrophobic BDE‐47 with a simple optimization in citrate content and sampling technique. Qualitative and quantitative determination of BDE‐47 was achieved using a portable Raman spectrometer. The SERS response exhibited a linear dependence on the BDE‐47 concentration up to 1000 nM with a detection limit of 75 nM. The density function theory‐calculated Raman spectra agreed well with the experimental observations, and the results justified the existence of electromagnetic enhancement and charge transfer mechanism. This in situ SERS platform allows easy and reliable detection of hydrophobic molecules such as BDE‐47 in complex matrices. Copyright © 2014 John Wiley & Sons, Ltd.     

A large‐solid‐angle X‐ray Raman scattering spectrometer at ID20 of the European Synchrotron Radiation Facility

An end‐station for X‐ray Raman scattering spectroscopy at beamline ID20 of the European Synchrotron Radiation Facility is described. This end‐station is dedicated to the study of shallow core electronic excitations using non‐resonant inelastic X‐ray scattering. The spectrometer has 72 spherically bent analyzer crystals arranged in six modular groups of 12 analyzer crystals each for a combined maximum flexibility and large solid angle of detection. Each of the six analyzer modules houses one pixelated area detector allowing for X‐ray Raman scattering based imaging and efficient separation of the desired signal from the sample and spurious scattering from the often used complicated sample environments. This new end‐station provides an unprecedented instrument for X‐ray Raman scattering, which is a spectroscopic tool of great interest for the study of low‐energy X‐ray absorption spectra in materials under in situ conditions, such as in operando batteries and fuel cells, in situ catalytic reactions, and extreme pressure and temperature conditions.     

Rapid outdoor non‐destructive detection of organic minerals using a portable Raman spectrometer

Raman spectral signatures have been obtained for a series of organic minerals using a compact portable Raman instrument equipped with 785‐nm laser excitation. Well‐resolved Raman spectra of crystalline salts of carboxylic acids, whewellite and mellite, as well as of the aromatic mineral idrialite were recorded. For comparative purposes, an amorphous fossil resin, baltic amber, was also investigated. The results obtained confirm that portable Raman instruments can be considered as excellent tools for field geological applications, including the detection of organic minerals in the frame of outcrops of sedimentary rocks or coal beds. Organic minerals can be added to the list of established biomarkers, including porphyrins, hydrocarbons and organic acids, which are important for the study with regard to future exobiological missions such as the ESA ExoMars mission to detect the presence of extinct or extant life on Mars. Copyright © 2009 John Wiley & Sons, Ltd.     

On‐and off‐site Raman study of rock‐shelter paintings at world‐heritage site of Bhimbetka

Rock‐shelter paintings of Bhimbetka world‐heritage site near Bhopal, India have been investigated using a portable Raman spectrometer. These paintings in the rock shelters belong to periods starting from pre‐historic to the 19th century AD (Gond period). In addition, tiny fragments of pigments (100–200 µm in size) extracted from some of the artworks were also studied in laboratory using a micro‐Raman spectrometer and analyzed using energy‐dispersive X‐ray analysis for elemental composition. Based on the Raman spectra and the elemental analysis mineral‐based pigments such as calcite, gypsum, hematite, whewellite, and goethite could be identified. A comparison of the spectra recorded on‐site using a light‐weight portable spectrometer with those using laboratory equipment is also made and discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

On‐site detection of phosgene agents by surface‐enhanced Raman spectroscopy coupled with a chemical transformation approach

Phosgene and its analogs are greatly harmful to the public health, environmental safety and homeland security as widely used industrial substances with extremely high toxicity. In order to rapidly evaluate the emergency risk caused by these chemicals, a new highly sensitive method based on surface‐enhanced Raman spectroscopy (SERS) technique for measurement of phosgene agents was developed for the first time. Coupled with a chemical transformation approach, the highly toxic phosgene was conveniently converted to a SERS‐sensitive probe, i.e. iodine (I₂), with low toxicity or non‐toxicity. The characteristic SERS peak in 459 cm⁻¹ was used for quantitation and was presumed as a formation of triiodide anion (I₃⁻), which was induced in an iodide (I⁻)‐aggregation Au NPs system. The total measurement can be completed in ~20 min with the limits of detection of ~60 µg/l (phosgene) and ~30 µg/l (diphosgene), respectively, on a portable Raman spectrometer. This work is the first report of SERS measurement on phosgene and diphosgene in a quantitative level. This method is expected to meet the requirements of on‐site detection of phosgene agents, promote emergency responses and raise more opportunities for the portable SERS applications. Copyright © 2015 John Wiley & Sons, Ltd.     

In situ detection of cocaine hydrochloride in clothing impregnated with the drug using benchtop and portable Raman spectroscopy

This study describes the application of benchtop and portable Raman spectroscopy for the in situ detection of cocaine hydrochloride in clothing impregnated with the drug. Raman spectra were obtained from a set of undyed natural and synthetic fibres and dyed textiles impregnated with the drug. The spectra were collected using three Raman spectrometers: one benchtop dispersive spectrometer coupled to a fibre‐optic probe and two portable spectrometers. Despite the presence of some spectral bands arising from the natural and synthetic polymer and dyed textiles, the drug could be identified by its characteristic Raman bands. High‐quality spectra of the drug could be acquired in situ within seconds and without any sample preparation or alteration of the evidential material. A field‐portable Raman spectrometer is a reliable technique that can be used by emergency response teams to rapidly identify unknown samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy for trace‐level detection of explosives

The detection of explosives and their associated compounds for security screening is an active area of research and a wide variety of detection methods are involved in this very challenging area. Surface‐enhanced Raman scattering (SERS) spectroscopy is one of the most sensitive tools for the detection of molecules adsorbed on nano‐scale roughened metal surface. Moreover, SERS combines high sensitivity with the observation of vibrational spectra of species, giving complete information on the molecular structure of material under study. In this paper, SERS was applied to the detection of very small quantities of explosives adsorbed on industrially made substrates. The spectra were acquired with a compact Raman spectrometer. Usually, a high signal‐to‐noise (S/N) spectrum, suitable for identification of explosive molecules down to few hundreds of picograms, was achieved within 30 s. Our measurements suggest that it is possible to exploit SERS using a practical detection instrument for routine analysis. Copyright © 2010 John Wiley & Sons, Ltd.     

Detection and analysis of cyclotrimethylenetrinitramine (RDX) in environmental samples by surface‐enhanced Raman spectroscopy

Techniques for rapid and sensitive detection of energetics such as cyclotrimethylenetrinitramine (RDX) are needed both for environmental and security screening applications. Here we report the use of surface‐enhanced Raman scattering (SERS) spectroscopy to detect traces of RDX with good sensitivity and reproducibility. Using gold (Au) nanoparticles (∼90–100 nm in diameter) as SERS substrates, RDX was detectable at concentrations as low as 0.15 mg/l in a contaminated groundwater sample. This detection limit is about two orders of magnitude lower than those reported previously using SERS techniques. A surface enhancement factor of ∼6 × 10⁴ was obtained. This research further demonstrates the potential for using SERS as a rapid, in situ field screening tool for energetics detection when coupled with a portable Raman spectrometer. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparison of the detection limits in the analysis of some medium atomic number elements measured with a portable XRF and an external proton beam PIXE spectrometer system

A portable X‐ray fluorescence (XRF) spectrometer system was constructed using an Amptek Mini‐X X‐ray tube and an X‐123 compact spectrometer. The spectrometer is optimised for the best limits of detection. Its analytic properties are tested and compared with an analogous laboratory‐based instrument, an external beam proton‐induced X‐ray emission spectrometry (PIXE) setup. Depending on elements in question the thick target detection limits of this portable XRF device are comparable or even lower than the PIXE setup. Copyright © 2011 John Wiley & Sons, Ltd.     

Rapid detection of gasoline by a portable Raman spectrometer and chemometrics

Identification of the gasoline purity is important for quality control and detection of gasoline adulteration. Principal component analysis and Raman spectroscopy were used to authenticate gasoline adulterated with methyl tert‐butyl ether (MTBE) and benzene. Gasoline could be clearly distinguished from gasoline adulterated with MTBE and benzene by a plot of the first principal component (x‐axis) against the second principal component (y‐axis). And the radial basis function neural network was used for quantitative prediction of the volume percentages of MTBE and benzene in gasoline based on Raman Spectra. The correlation coefficient (r) and mean absolute percentage error between predictive values and spiked values were 0.9907 and 0.9934 and 15.73 and 8.19%, respectively. Moreover, the Raman spectra of the samples were obtained with a portable Raman spectrometer. Therefore, the method is simple, effective, fast, does not require sample pre‐processing, and is promising for rapid gasoline detection. Copyright © 2012 John Wiley & Sons, Ltd.     

Raman studies of Japanese art objects by a portable Raman spectrometer using liquid crystal tunable filters

Raman spectroscopic studies of a few Japanese art objects have been performed by using a portable Raman spectrometer constructed with liquid crystal tunable filters as dispersive elements. Interesting information has been obtained from the Raman spectra observed from ukiyo‐e's (Japanese woodblock prints) and their woodblocks. The performance data and the imaging capabilities of the constructed spectrometer are presented. Copyright © 2011 John Wiley & Sons, Ltd.     

Near‐infrared surface‐enhanced Raman spectroscopy (NIR‐SERS) studies on oxyheamoglobin (OxyHb) of liver cancer based on PVA‐Ag nanofilm

A near‐infrared surface‐enhanced Raman spectroscopy (NIR‐SERS) method was employed for oxyheamoglobin (OxyHb) detection to develop a simple blood test for liver cancer detection. Polyvinyl alcohol protected silver nanofilm (PVA‐Ag nanofilm) used as the NIR‐SERS active substrate to enhance the Raman scattering signals of OxyHb. High quality NIR‐SERS spectrum from OxyHb adsorbed on PVA‐Ag nanofilm can be obtained within 16 s using a portable Raman spectrometer. NIR‐SERS measurements were performed on OxyHb samples of healthy volunteers (control subjects, n = 30), patients (n = 40) with confirmed liver cancer (stage I, II and III) and the liver cancer patients after surgery (n = 30). Meanwhile, the tentative assignments of the Raman bands in the measured NIR‐SERS spectra were performed, and the results suggested cancer specific changes on molecule level, including a decrease in the relative concentrations and the percentage of aromatic amino acids of OxyHb, changes of the vibration modes of the C_aH_m group and pyrrole ring of OxyHb of liver cancer patients. In this paper, principal component analysis (PCA) combined with independent sample T test analysis of the measured NIR‐SERS spectra separated the spectral features of the two groups into two distinct clusters with the sensitivity of 95.0% and the specificity of 85.7%. Meanwhile, the recovery situations of the liver cancer patients after surgery were also assessed using the method of discriminant analysis‐predicting group membership based on PCA. The results show that 26.7% surgeried liver cancer patients were distinguished as the normal subjects and 63.3% were distinguished into the cancer. Our study demonstrated great potentials for developing NIR‐SERS OxyHb analysis into a novel clinical tool for non‐invasive detection of liver cancers. Copyright © 2013 John Wiley & Sons, Ltd.     

Depth‐resolved in vivo micro‐Raman spectroscopy of a murine skin tumor model reveals cancer‐specific spectral biomarkers

We have developed a micro‐Raman spectrometer system for use to differentiate tumor lesions from normal skin using an in vivo animal model. A study of 494 Raman spectra from 24 mice revealed different spectral patterns at different depths and between normal and tumor‐bearing skin sites. A peak at 899 cm⁻¹ (possibly from proline or fatty acids) and one with higher intensity in the 1325–1330 cm⁻¹ range (assigned to nucleic acids) were correlated with the presence of tumors, which can potentially be used as biomarkers for skin cancer detection. Spectral diagnosis performed on the murine tumor model achieved a diagnostic sensitivity of 95.8% and specificity of 93.8%. These results encourage us to develop further the use of confocal Raman spectroscopy as a clinical tool for noninvasive human skin biochemical analysis, particularly in relation to skin cancer. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of grain size distribution on Raman analyses and the consequences for in situ planetary missions

Raman spectroscopy can be used for analysing both mineral and organic phases, thus allowing characterisation of the microbial‐scale geological context as well as the search for possible traces of life. This method is therefore very useful for in situ planetary exploration missions. Compared with the myriad of sample preparation techniques available in terrestrial laboratories, the possibilities for sample preparation during in situ missions on other planetary bodies are extremely limited and are generally restricted to abrasion of rock surfaces or crushing of the target samples. Whereas certain techniques need samples to be prepared in powder form, such as X‐ray diffraction, this kind of preparation is not particularly suitable for optical microscopy and/or Raman spectroscopy. In this contribution, we examine the effects of powdering rock and mineral samples on optical observations and Raman analyses. We used a commercial Raman spectrometer, as well as a Raman laser spectrometer that simulates the instrument being developed for the future ExoMars 2018 mission. The commercial Raman spectrometer documents significant modifications to the spectra of the powdered samples, including broadening of the peaks and shifts in their position, as well as the appearance of new peaks. These effects are caused by localised heating of the sample under the laser beam and amplification of nominal surface effects due to the increase in surface area in finer grain sizes. However, most changes observed in the Raman spectra using the Raman laser spectrometer system are negligible because the relatively large (50 µm diameter) laser spot size produces lower irradiance. Furthermore, minor phases were more easily detectable in the powdered samples. Most importantly, however, this sample preparation method results in the loss of the textural features and context, making identification of potential fossilized microbial remains more problematic. Copyright © 2013 John Wiley & Sons, Ltd.     

Raman spectroscopy for the analysis of coal: a review

The advances in the characterization of amorphous carbons by Raman spectroscopy over the last four decades are of interest to many industries, especially those involving the combustion, gasification and pyrolysis of coal. Many researchers report on the Raman character of the natural organic matter in carbon‐containing compounds, such as coal, and relate the Raman bands to the structural order of the amorphous carbons. The basis of most of these studies evolved around the assignment of the G (graphitic, ∼1580 cm⁻¹) band to crystalline graphite and any other bands, called D bands, (disorder, various from 1100 to 1500 cm⁻¹) to any type of structural disorder in the graphitic structure. Concerning coal analysis, the information gained by Raman investigations has been used to describe char evolution as a function of temperature, the presence of catalysts and different gasification conditions. In addition, researchers looked at maturation, grade, doppleritization and many more aspects of interest. One aspect that has, however, not been addressed by most of the researchers is the natural inorganic matter (NIM) in the carbon‐containing compounds. Micro‐Raman spectroscopy (MRS) has many advantages over other characterization tools, i.e. in situ analysis, nondestructive, no sample preparation, low detection limit, micrometer‐scale characterization, versatility and sensitivity to many amorphous compounds. With the distinct advantages it has over that of other molecular characterization tools, such as powder X‐ray diffraction (PXRD), Fourier‐transform infrared spectrometry (FT‐IR) and scanning electron microscopy with X‐ray detection (SEM/EDS), it is surprising that it has not yet been fully exploited up to this point for the characterization of the NIM in coal and other amorphous carbons. This paper reviews the work published on the Raman characterization of the natural organic matter (NOM) of coals and reports on preliminary results of the NIM character of various South African coals, whereby various inorganic compounds and minerals in the coal have been characterized. Copyright © 2010 John Wiley & Sons, Ltd.     

Subdiffraction‐limited chemical imaging of patterned phthalocyanine films using tip‐enhanced near‐field optical microscopy

A tip‐enhanced near‐field optical microscope, based on a shear‐force atomic force microscope with plasmonic tip coupled to an inverted, confocal optical microscope, has been constructed for nanoscale chemical (Raman) imaging of surfaces. The design and validation of the instrument, along with its application to near‐field Raman mapping of patterned organic thin films (coumarin‐6 and Cu(II) phthalocyanine), are described. Lateral resolution of the instrument is estimated at 50 nm (better than λ/10), which is roughly dictated by the size of the plasmonic tip apex. Additional observations, such as the distance scaling of Raman enhancement and the inelastic scattering background generated by the plasmonic tip, are presented. Copyright © 2016 John Wiley & Sons, Ltd.     

Non‐invasive time‐course imaging of apoptotic cells by confocal Raman micro‐spectroscopy

Confocal Raman micro‐spectroscopy (CRMS) was used to measure time‐course spectral images of live cells undergoing apoptosis without using molecular labels or other invasive procedures. Human breast cancer cells (MDA‐MB‐231) were exposed to 300 µM etoposide to induce apoptosis, and Raman spectral images were acquired from the same cells at 2‐h intervals over a period of 6 h. The purpose‐built inverted confocal Raman micro‐spectrometer integrated an environmental enclosure and wide‐field fluorescence imaging. These key instrumental elements allowed the cells to be maintained under sterile physiological conditions (37 °C, 5% CO₂) and enabled viability and apoptosis assays to be carried out on the cells at the end of CRMS measurements. The time‐course spectral images corresponding to DNA Raman bands indicated an increase in signal intensity in apoptotic cells, which was attributed to DNA condensation. The Raman spectral images of lipids indicated a high accumulation of membrane phospholipids and highly unsaturated non‐membrane lipids in apoptotic cells. This study demonstrates the potential of CRMS for label‐free time‐course imaging of individual live cells. This technique may become a useful tool for in vitro toxicological studies and testing of new pharmaceuticals, as well as other time‐dependent cellular processes, such as cell differentiation, cell cycle and cell–cell interactions. Copyright © 2010 John Wiley & Sons, Ltd.