Ab initio aqueous thermochemistry: application to the oxidation of hydroxylamine in nitric acid solution

Ab initio molecular orbital calculations were performed and thermochemical parameters estimated for 46 species involved in the oxidation of hydroxylamine in aqueous nitric acid solution. Solution-phase properties were estimated using the several levels of theory in Gaussian03 and using COSMOtherm. The use of computational chemistry calculations for the estimation of physical properties and constants in solution is addressed. The connection between the pseudochemical potential of Ben-Naim and the traditional standard state-based thermochemistry is shown, and the connection of these ideas to computational chemistry results is established. This theoretical framework provides a basis for the practical use of the solution-phase computational chemistry estimates for real systems, without the implicit assumptions that often hide the nuances of solution-phase thermochemistry. The effect of nonidealities and a method to account for them is also discussed. A method is presented for estimating the solvation enthalpy and entropy for dilute aqueous solutions based on the solvation free energy from the ab initio calculations. The accuracy of the estimated thermochemical parameters was determined through comparison with (i) enthalpies of formation in the gas phase and in solution, (ii) Henry's law data for aqueous solutions, and (iii) various reaction equilibria in aqueous solution. Typical mean absolute deviations (MAD) for the solvation free energy in room-temperature water appear to be ~1.5 kcal/mol for most methods investigated. The MAD for computed enthalpies of formation in solution was 1.5-3 kcal/mol, depending on the methodology employed and the type of species (ion, radical, closed-shell) being computed. This work provides a relatively simple and unambiguous approach that can be used to estimate the thermochemical parameters needed to build detailed ab initio kinetic models of systems in aqueous solution. Technical challenges that limit the accuracy of the estimates are highlighted.     

Photoelectron imaging of Ag(-)(H2O)x and AgOH(-)(H2O)y (x=1,2, y=0-4)

The photoelectron images of Ag(-)(H(2)O)(x) (x=1,2) and AgOH(-)(H(2)O)(y) (y=0-4) are reported. The Ag(-)(H(2)O)(1,2) anionic complexes have similar characteristics to the other two coinage metal-water complexes that can be characterized as metal atomic anion solvated by water molecules with the electron mainly localized on the metal. The vibrationally well-resolved photoelectron spectrum allows the adiabatic detachment energy (ADE) and vertical detachment energy (VDE) of AgOH(-) to be determined as 1.18(2) and 1.24(2) eV, respectively. The AgOH(-) anion interacts more strongly with water molecules than the Ag(-) anion. The photoelectron spectra of Ag(-)(H(2)O)(x) and AgOH(-)(H(2)O)(y) show a gradual increase in ADE and VDE with increasing x and y due to the solvent stabilization.     

Surface S(N)2 reaction by H2O on chlorinated Si(100)-2 x 1 surface

The potential energy surfaces of one, two, and three water molecule sequential adsorptions on the symmetrically chlorinated Si(100)-2 x 1 surface were theoretically explored with SIMOMM:MP2/6-31G(d). The first water molecule adsorption to the surface dimer requires a higher reaction barrier than the subsequent second water molecule adsorption. The lone pair electrons of the incoming water molecule nucleophilically attack the surface Si atom to which the leaving Cl group is bonded, yielding an S(N)2 type transition state. At the same time, the Cl abstracts the H atom of the incoming water molecule, forming a unique four-membered ring conformation. The second water molecule adsorption to the same surface dimer requires a much lower reaction barrier, which is attributed to the surface cooperative effect by the surface hydroxyl group that can form a hydrogen bond with the incoming second water molecule. The third water molecule adsorption exhibits a higher reaction barrier than the first and the second water molecule adsorption channels but yields a thermodynamically more stable product. In general, it is expected that the surface Si-Cl bonds can be subjected to the substitution reactions by water molecules, yielding surface Si-OH bonds, which can be a good initial template for subsequent surface chemical modifications. However, oversaturations can be a competing side reaction under severe conditions, suggesting that the precise control of surface kinetic environments is necessary to tailor the final surface characteristics.     

Single photon ionization of hydrogen bonded clusters with a soft x-ray laser: (HCOOH)x and (HCOOH)y(H2O)z

Pure, neutral formic acid (HCOOH)n+1 clusters and mixed (HCOOH)(H2O) clusters are investigated employing time of flight mass spectroscopy and single photon ionization at 26.5 eV using a very compact, capillary discharge, soft x-ray laser. During the ionization process, neutral clusters suffer little fragmentation because almost all excess energy above the vertical ionization energy is taken away by the photoelectron, leaving only a small part of the photon energy deposited into the (HCOOH)n+1+ cluster. The vertical ionization energy minus the adiabatic ionization energy is enough excess energy in the clusters to surmount the proton transfer energy barrier and induce the reaction (HCOOH)n+1+-->(HCOOH)nH+ +HCOO making the protonated (HCOOH)nH+ series dominant in all data obtained. The distribution of pure (HCOOH)nH+ clusters is dependent on experimental conditions. Under certain conditions, a magic number is found at n=5. Metastable dissociation rate constants of (HCOOH)nH+ are measured in the range (0.1-0.8)x10(4) s(-1) for cluster sizes 4相似文献   

Kinetics of oxidation of vanadium(III) by hydroxylamine in acid medium

The kinetics of oxidation of vanadium(III) by hydroxylamine have been investigated at high acidities in the temperature range 25–30 °C. Rates decreased with increasing acidity of the medium. Both NH₂OH and NH₃OH⁺ are capable of oxidizing V(III) in parallel reactions, the order being unity each in oxidant and reductant.

---

(III) 25–30 °C. . NH₂OH NH₃OH⁺ V(III) , , .

     

Direct conversion of bio-ethanol to isobutene on nanosized Zn(x)Zr(y)O(z) mixed oxides with balanced acid-base sites

We report the design and synthesis of nanosized Zn(x)Zr(y)O(z) mixed oxides for direct and high-yield conversion of bio-ethanol to isobutene (~83%). ZnO is addded to ZrO(2) to selectively passivate zirconia's strong Lewis acidic sites and weaken Br?nsted acidic sites, while simultaneously introducing basicity. As a result, the undesired reactions of bio-ethanol dehydration and acetone polymerization/coking are suppressed. Instead, a surface basic site-catalyzed ethanol dehydrogenation to acetaldehyde, acetaldehyde to acetone conversion via a complex pathway including aldol-condensation/dehydrogenation, and a Br?nsted acidic site-catalyzed acetone-to-isobutene reaction pathway dominates on the nanosized Zn(x)Zr(y)O(z) mixed oxide catalyst, leading to a highly selective process for direct conversion of bio-ethanol to isobutene.     

Crystal structure of NdSi(6-z)Al(1+z)O(z)N(10-z) (z = 0.4) determined by single-crystal X-ray diffraction

Single crystals of JEM-phase NdSi(6-z)Al(1+z)O(z)N(10-z) were successfully prepared from starting powders of Si?N?, AlN and Nd?O? at 1700 °C for 3 h under nitrogen atmosphere. The z value of Nd-doped JEM-phase was determined to be 0.4 via determination of oxygen and nitrogen by elemental analysis. This result may be beneficial for overcoming the difficulty on preparation of single-phase JEM-phase Sialon materials and further characterization on their properties. The detailed crystal structure of Nd-Sialon was solved on the basis of single-crystal X-ray diffraction data for the first time. The space group is Pbcn (no. 60); a = 9.3060(6) ?, b = 9.7224(6) ?, c = 8.8777(5) ?; Z = 4; V = 803.22(8) ?3; D(c) = 3.971 g cm?3; R? = 0.0297 and wR? = 0.0739 for all reflections refined against F2, with GooF value of 1.031.     

Nanostructured Ti(1-x)S(x)O(2-y)N(y) heterojunctions for efficient visible-light-induced photocatalysis

Highly visible-light-active S,N-codoped anatase-rutile heterojunctions are reported for the first time. The formation of heterojunctions at a relatively low temperature and visible-light activity are achieved through thiourea modification of the peroxo-titania complex. FT-IR spectroscopic studies indicated the formation of a Ti(4+)-thiourea complex upon reaction between peroxo-titania complex and thiourea. Decomposition of the Ti(4+)-thiourea complex and formation of visible-light-active S,N-codoped TiO(2) heterojunctions are confirmed using X-ray diffraction, Raman spectroscopy, transmission electron microscopy, and UV/vis spectroscopic studies. Existence of sulfur as sulfate ions (S(6+)) and nitrogen as lattice (N-Ti-N) and interstitial (Ti-N-O) species in heterojunctions are identified using X-ray photoelectron spectroscopy (XPS) and FT-IR spectroscopic techniques. UV-vis and valence band XPS studies of these S,N-codoped heterojunctions proved the fact that the formation of isolated S 3p, N 2p, and Π* N-O states between the valence and conduction bands are responsible for the visible-light absorption. Titanium dioxide obtained from the peroxo-titania complex exists as pure anatase up to a calcination temperature as high as 900 °C. Whereas, thiourea-modified samples are converted to S,N-codoped anatase-rutile heterojunctions at a temperature as low as 500 °C. The most active S,N-codoped heterojunction 0.2 TU-TiO(2) calcined at 600 °C exhibits a 2-fold and 8-fold increase in visible-light photocatalytic activities in contrast to the control sample and the commercial photocatalyst Degussa P-25, respectively. It is proposed that the efficient electron-hole separation due to anatase to rutile electron transfer is responsible for the superior visible-light-induced photocatalytic activities of S,N-codoped heterojunctions.     

Raman,infrared and force field studies of K2(12)C2O4 x H2O and K2(13)C2O4 x H2O in the solid state and in aqueous solution,and of (NH4)2(12)C2O4 x H2O and (NH4)2(13)C2O4 x H2O in the solid state

The Raman and infrared spectra of solid K2(12)C2O4 x H2O are reported together with, for the first time, the corresponding Raman and infrared spectra of solid K2(13)C2O4 x H2O. Raman spectra of aqueous solutions of both isotopomers are also reported. In the solid state the oxalate anion is planar with D2h symmetry in this salt, whereas in aqueous solution the Raman spectra of the anion are best interpreted on the basis of D2d symmetry. The Raman spectra of solid (NH4)2(12)C2O4 x H2O and (NH4)2(13)C2O4 x H2O, in which the oxalate anion is twisted from planarity by 28 degrees about the CC bond, have also been recorded. Several reassignments have been made. The harmonic force field for the oxalate anion in the D2h, D2 and D2d geometries has been determined in part, and approximate values of key valence force constants determined. All the observed band wavenumbers and 12C/13C isotopic shifts are well reproduced by the force fields. The potential energy distribution of the totally symmetric normal modes of planar oxalate indicates that each mode consists of extensively mixed symmetry corrdinates and that the labels previously used for the bands seen here at 475 and 879 cm(-1) would better be described as v(CC) and deltaS(CO2), respectively, putting them in the same wavenumber order as v(NN) and deltaS(NO2) for the isoelectronic and isostructural molecule N2O4. The stretching force constants of N2O4 and planar C2O4(2-) are established to be in the order f(NN) < f(CC) and f(NO) > f(CO), consistent with the known relative bond lengths.     

Reducing Pu(IV) to Pu(III) with hydroxylamine in nitric acid solutions

Los Alamos National Laboratory (LANL) has evaluated different techniques to concentrate and remove plutonium from solutions stored at the Rocky Flats Environmental Technology Site (RFETS). Pu(III) oxalate precipitation was chosen to treat nitric acid solutions because it is a simple and efficient technique for removing plutonium. Reducing Pu(IV) to Pu(III) is a key process step which affects the rest of the processing sequence. Because of differences in the literature¹ over the kinetics of the reaction, additional data was obtained and compared with existing data to examine the kinetic relationship, and determine an appropriate relationship for future engineering evaluations. The results and conclusions of this work, along with new experimental data, are presented.     

Computation of the generalized Debye functionsδ(x,y) andD(x,y)

Automatic computer programs (BASIC-PLUS) are developed to calculate Debye functions also for non integer exponents. Functions of this type occur in the heat capacity analysis of polymer crystals, if simple continuum approximations are used. The heat capacity of completely crystalline polyethylene is calculated and compared with experimental data.     

Kinetics of the oxidation of octacyanomolybdate(IV) by periodate in aqueous acid

Summary The kinetics of oxidation of [Mo(CN)₈]^4– by IO ₄ ^– in aqueous acid is described by the equation: d[{Mo(CN)₈}^3–]/ dt=2k₃[{Mo(CN)₈}^4–][IO ₄ ^– ][H⁺]. Unlike IO ₄ ^– oxidations of [Fe(CN)₆]^4– and [W(CN)₈]^4–, no [H⁺] independent term exists in the [Mo(CN)₈]^4– reaction, which indicates that, in neutral and alkaline solutions, oxidation of [Mo(CN)₈]^4– is thermodynamically unfavourable. An inner-sphere mechanism, consistent with the rate law, is proposed. This conclusion is based, in the absence of direct evidence, on the observed behaviour of IO ₄ ^– as an inner-sphere oxidant.     

Very large breathing effect in the first nanoporous chromium(III)-based solids: MIL-53 or Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)] x [HO(2)C-C(6)H(4)-CO(2)H](x) x H(2)O(y)

The first three-dimensional chromium(III) dicarboxylate, MIL-53as or Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)].[HO(2)C-C(6)H(4)-CO(2)H](0.75), has been obtained under hydrothermal conditions (as: as-synthesized). The free acid can be removed by calcination giving the resulting solid, MIL-53ht or Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)]. At room temperature, MIL-53ht adsorbs atmospheric water immediately to give Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)] x H(2)O or MIL-53lt (lt: low-temperature form, ht: high-temperature form). Both structures, which have been determined by using X-ray powder diffraction data, are built up from chains of chromium(III) octahedra linked through terephthalate dianions. This creates a three-dimensional structure with an array of one-dimensional large pore channels filled with free disordered terephthalic molecules (MIL-53as) or water molecules (MIL-53lt); when the free molecules are removed, this leads to a nanoporous solid (MIL-53ht) with a Langmuir surface area over 1500 m(2)/g. The transition between the hydrated form (MIL-53lt) and the anhydrous solid (MIL-53ht) is fully reversible and followed by a very high breathing effect (more than 5 A), the pores being clipped in the presence of water molecules (MIL-53lt) and reopened when the channels are empty (MIL-53ht). The thermal behavior of the two solids has been investigated using TGA and X-ray thermodiffractometry. The sorption properties of MIL-53lt have also been studied using several organic solvents. Finally, magnetism measurements performed on MIL-53as and MIL-53lt revealed that these two phases are antiferromagnetic with Néel temperatures T(N) of 65 and 55 K, respectively. Crystal data for MIL-53as is as follows: orthorhombic space group Pnam with a = 17.340(1) A, b = 12.178(1) A, c = 6.822(1) A, and Z = 4. Crystal data for MIL-53ht is as follows: orthorhombic space group Imcm with a = 16.733(1) A, b = 13.038(1) A, c = 6.812(1) A, and Z = 4. Crystal data for MIL-53lt is as follows: monoclinic space group C2/c with a = 19.685(4) A, b = 7.849(1) A, c = 6.782(1) A, beta = 104.90(1) degrees, and Z = 4.     

Thermodynamic equilibrium compositions, structures, and reaction energies of Pt(x)O(y) (x = 1-3) clusters predicted from first principles

As synthetic nanocatalysis strives to create and apply well-defined catalytic centers containing as few as a handful of active metal atoms, it becomes particularly important to understand the structures, compositions, and reactivity of small metal clusters as a function of size and chemical environment. As a part of our effort to better understand the oxidation chemistry of Pt clusters, we present here a comprehensive set of density functional theory simulations combined with thermodynamic modeling that allow us to map out the T-p(O)2 phase diagrams and predict the oxygen affinity of Pt(x)O(y) clusters, x = 1-3. We find that the Pt clusters have a much stronger tendency to form oxides than does the bulk metal, that these oxides persist over a wide range of oxygen chemical potentials, and that the most stable cluster stoichiometry varies with size and may differ from the stoichiometry of the stable bulk oxide in the same environment. Further, the facility with which the clusters are reduced depends both on size and on composition. These models provide a systematic framework for understanding the compositions and energies of redox reactions of discrete metal clusters of interest in supported and gas-phase nanocatalysis.     

One-step chemical vapor growth of Ge/SiC(x)N(y) nanocables

Single-step synthesis of one-dimensional Ge/SiCxNy core-shell nanocables was achieved by chemical vapor deposition of the molecular precursor [Ge{N(SiMe3)2}2]. Single crystalline Ge nanowires (diameter approximately 60 nm) embedded in uniform SiCxNy shells were obtained in high yields, whereby the growth process was not influenced by the nature of substrates. The shell material exhibited high oxidation and chemical resistance at elevated temperatures (up to 250 degrees C) resulting in the preservation of size-dependent semiconductor properties of germanium nanowires, such as intact transport of charge carriers and reduction of energy consumption, when compared to pure Ge nanowires.     

Methanol and ethanol oxidation by chromium(VI) in aqueous perchloric acid

Summary Oxidation of short-chain alcohols (MeOH and EtOH) by Cr^VI in concentrated aqueous HClO₄ does not fit pseudo-first order rate equations, but results can be expressed in a two-exponential equation. A reaction mechanism based upon a chromate ester intermediate in equilibrium with the protonated alcohol and the chromic acid, suitable for a longer chain alcohol, does not account for kinetic results. A new mechanism is considered involving an intermediate reaction between chromic and perchloric acids.     

Polymerization of Pu(IV) in aqueous nitric acid solutions

The polymerization of Pu(IV) in aqueous nitric acid solutions has been studied spectrophotometrically both to determine the effects of large UO₂(NO₃)₂ concentrations on the polymerization rates and, more generally, to review the influence of other major parameters on the polymer reaction. Typically, experiments have been performed at 50°C and at 0.05M Pu in aqueous solutions of HNO₃ at concentrations ranging from 0.07 to 0.4M. An induction period usually precedes the polymer growth stage, during which time it is believed that primary hydrolysis products form and begin to aggregate. Uranyl nitrate retards the polymerization reaction by approximately 35% despite the counteracting influence of the nitrate ions associated with this solute. The rate of polymer formation at 50°C has been shown to be third order in Pu(IV) concentration.