Synthesis and Characterization of Poly(ethylene terephthalate)/Modified Lithium‐Aluminum‐Layered Double Hydroxide Nanocomposites Prepared Using In‐situ Polymerization

Layered double hydroxides are a type of layered stacked compound, which can be intercalated with organic‐molecule modifiers. An ion‐exchange process for layered double hydroxide (LDH) was used to intercalate water‐soluble sulfanilic acid salt (SAS) and dimethyl 5‐sulfoisopthalate (DMSI) into lithium aluminum layered double hydroxides (LiAl LDHs). In this work, a hydrothermal process was used to modify LiAl LDHs, and the modified LiAl LDHs were treated with either SAS or DMSI through an ion‐exchange process and were then intercalated using bis‐hydroxyethylene terephthalate (BHET). The results indicate that the modified LiAl LDHs improved the interlayer compatibility between the PET and LiAl LDH layers; thus, enabling the oligomer molecules to more easily enter the gallery of the LiAl LDH layers so that polymer chains could be included between the LDH layers during polymerization of the matrix. The better barrier, mechanical properties, and thermal stability of these new types of PET nanocomposites are discussed.     

聚苯乙烯/层状双金属氢氧化物纳米复合材料的制备与表征

由离子交换法制备4,4′-偶氮二(4-氰基戊酸)根(ACP)单独插层和ACP/对苯乙烯磺酸根(VBS)复合插层的层状双金属氢氧化物(LDH),再通过原位悬浮聚合制得聚苯乙烯(PS)/LDH纳米复合材料,对插层改性LDH和复合材料进行了结构和性能表征.X-射线衍射和元素分析表明ACP可以单独或与VBS一起插入到LDH层间.透射电镜和X-射线衍射分析表明采用ACP/VBS复合插层LDH与苯乙烯原位聚合得到的复合材料中LDH剥离程度高,熔融加工后LDH基本以纳米层板形式分散在PS基体中.LDH的引入可明显提高PS的热稳定性,而熔体流动性下降.     

Synthesis and UV absorption properties of 2,3-dihydroxynaphthalene-6-sulfonate anion-intercalated Zn-Al layered double hydroxides

An organic UV absorbent has been intercalated into a layered double hydroxide (LDH) host by ion exchange of a Zn-Al-LDH-nitrate precursor with a solution of 2,3-dihydroxynaphthalene-6-sulfonic acid (DNSA) sodium salt in water. After intercalation of the UV absorbent, the powder X-ray diffraction (XRD) pattern shows that the interlayer distance in the LDHs increases from 0.90 to 1.59 nm. The possible structure is that the interlayer DNSA anions arrange in a monolayer and in a perpendicular orientation toward the hydroxide layers. Infrared spectra and TG-DTA curves reveal the presence of a complex system of supramolecular host-guest interactions between layers. The thermal stability of the intercalated UV absorbent was investigated by TG-DTA and it was found that this material is more stable than the original organic UV absorbent at high temperature, showing that the thermostability is markedly enhanced after intercalation into the LDH host. The UV absorbent-intercalated LDHs exhibit excellent UV photostability in polypropylene composites.     

Reduction of biselenites into polyselenides in interlayer space of layered double hydroxides

A selenous acid (H₂SeO₃) precursor was intercalated as biselenite (HSeO₃⁻) ions into the interlayer gallery of carbonated magnesium aluminum layered double hydroxide (MgAl-LDH) in aqueous solution. Reduction reaction of selenous ions by aqueous hydrazine solution produced polyselenide intercalated LDHs which were consecutively exchanged with iodide through redox reaction under iodine vapor. The polyselenide containing LDHs adsorbed iodine vapor spontaneously and triiodide was incorporated in the interlayer space followed by formation of selenium polycrystalline phase. Two dimensional framework of MgAl-LDH is strong enough to resist against the reducing power of hydrazine as well as oxidation condition of iodine. The SEM data demonstrated that the shapes of LDH polycrystalline have little changed after the above redox reactions. The polyselenide and iodide LDH products were analyzed by XRD, Infrared and Raman spectra which strongly suggested the horizontal arrangement of polyselenide and triiodide in gallery space of LDHs.     

Layered Double Hydroxides Intercalated by Polyoxometalate Anions with Keggin (alpha-H(2)W(12)O(40)(6)(-)), Dawson (alpha-P(2)W(18)O(62)(6)(-)), and Finke (Co(4)(H(2)O)(2)(PW(9)O(34))(2)(10)(-)) Structures

The pillaring of Mg(3)Al layered double hydroxides (LDHs) by the title polyoxometalates (POMs) was accomplished by ion exchange reaction of the LDH-hydroxide and -adipate precursors with the POM anion at ambient or refluxing temperatures. The structural, thermal and textural properties of the LDH-POM intercalates were elucidated based on XRD, FTIR, TEM, EDS, and N(2) adsorption-desorption studies. A gallery height of approximately 10 ? was observed for the LDH intercalated by the symmetrical Keggin POM, whereas two different gallery heights were found for the cylindrical Dawson (14.5 and 12.8 ?) and Finke (13.3 and 12.6 ?) anions, depending on the preparation temperature. The differences in POM orientations were rationalized in terms of different electrostatic and hydrogen-bonding interactions between the POM pillars and the LDH layers. Upon thermal treatment at >/=100 degrees C, the intercalated Dawson and Finke POM ions exhibited only one gallery orientation, regardless of synthesis conditions. The crystalline microporous structures were retained upon heating each LDH-POM intercalate in N(2) to 200 degrees C. Pillaring in all cases was accompanied by the formation of a poorly ordered Mg(2+)/Al(3+) salt impurity that formed on the external surfaces of the LDH crystals.     

Benzocarbazole anions intercalated layered double hydroxide and its tunable fluorescence

Luminescent benzocarbazole anions (BCZC) intercalated into the interlayer region of Mg-Al-layered double hydroxides (BCZC/LDH) with different layered charge densities (LCD) were prepared. The structure and chemical composition of the composites were characterized by X-ray diffraction, elemental analysis, thermogravimetry and differential thermal analysis (TG-DTA), infrared spectra (FT-IR), UV-vis absorption and fluorescence spectroscopy. The photoemission behavior of BCZC in the LDH matrix with high (Mg/Al ratio = 1.801) and low (Mg/Al ratio = 3.132) LCD is similar to that of BCZC solid and aqueous solution states respectively, indicating that the luminescence performances of the intercalated dye anions can be tuned by adjusting the LCD of the LDH layer. Moreover, the thermal stability and stacking order of BCZC are largely improved upon intercalation, and the BCZC/LDH thin film exhibits well polarized luminescence with the luminescent anisotropy of 0.15-0.20. In addition, molecular dynamics (MD) simulation was employed to calculate the basal spacing and molecular arrangement of the intercalated BCZC within the LDH matrix. The simulation results show that the distribution of BCZC anions is much broader in the gallery of Mg-Al-LDH with high LCD, while BCZC anions exhibit a more ordered arrangement in LDH with low LCD. Furthermore, the radial distribution functions of interlayer water molecules were also studied. Based on the combination of experiment and theoretical simulation, this work provides a detailed understanding of the tunable photoluminescence, orientation and diffusion behavior of the luminescent molecules confined within the gallery of a 2D inorganic matrix.     

Preparation and thermal decomposition study of pyridinedicarboxylate intercalated layered double hydroxides

Supramolecular 2,3- and 2,5-pyridinedicarboxylate (PDC) intercalated ZnAl-layered double hydroxides (2,3- and 2,5-PDC–ZnAl–LDHs) have been prepared by ion exchange method. The structure and composition of the intercalated materials have been studied by X-ray diffraction (XRD) and inductively coupled plasma emission spectroscopy (ICP). The study indicates that the 2,3-PDC and 2,5-PDC anions are accommodated as interdigitated bilayer and monolayer arrangement respectively between the sheets of LDHs. Furthermore, their thermal decomposition processes were studied by the use of in situ high temperature X-ray diffraction (HT-XRD), and the combined technique of thermogravimetry-differential thermal analysis-mass spectrometry (TG-DTA-MS) under N2 atmosphere. Based on the comparison study on the temperatures of both decarboxylation and complete decomposition of interlayer PDC, it can be concluded that 2,5-PDC–ZnAl–LDHs has higher thermal stability than that of 2,3-PDC–ZnAl–LDHs.     

二氟尼柳/水滑石插层组装结构、氢键及水合特性的分子动力学模拟

采用分子动力学方法模拟二氟尼柳插层水滑石(DIF/LDHs)的超分子结构, 研究复合材料主客体间形成的氢键以及水合膨胀特性.结果表明, 当水分子总数与DIF分子总数之比Nw≤3时, 层间距dc保持基本恒定, 约1.80 nm; 当Nw≥4时, 层间距逐渐增大, 且符合dc=1.2611Nw+13.63线性方程. 随着水分子个数增加, 水合能驻UH逐渐增大. 当Nw≤16时, 由于⊿UH<-41.84 kJ·mol-1, LDHs-DIF可以持续吸收水, 从而使材料层间距不断膨胀. 但当Nw≥24时, ⊿UH>-41.84 kJ·mol-1, 此时LDHs-DIF层间不能再进一步水合, 因此LDHs-DIF在水环境中膨胀具有一定的限度. 水滑石层间存在复杂的氢键网络. DIF/LDHs水合过程中, 水分子首先同步与层板和阴离子构成氢键; 当阴离子趋于饱和后, 水分子继续与层板形成氢键, 并逐步发生L-W型氢键取代L-A型氢键, 驱使阴离子向层间中央移动, 与层板发生隔离; 最后水分子在水滑石羟基表面形成有序结构化水层.     

Synthesis and characterization of new Mg(2)Al-paratungstate layered double hydroxides

Layered double hydroxides (LDHs, or hydrotalcites) with Mg(2+) and Al(3+) cations in the mixed metal hydroxide layer and paratungstate anions in the interlayer have been prepared. Different methods have been followed: anion exchange with Mg,Al LDHs originally containing nitrate or adipate, reconstruction of the LDH structure from a mildly calcined Mg(2)Al-CO(3) LDH, and coprecipitation. In all cases, the tungsten precursor salt was (NH(4))(10)H(2)W(12)O(42). The prepared solids have been characterized by elemental chemical analysis, powder X-ray diffraction (PXRD), FT-IR spectroscopy, thermogravimetric (TG) and differential thermal (DTA) analyses, scanning electron microscopy (SEM) with EDX (energy-dispersive X-ray analysis), and nitrogen adsorption at -196 degrees C for surface area and surface texture. Most of the synthesis methods used, especially anion exchange starting from a Mg(2)Al-NO(3) precursor at low temperature and short reaction times, lead to formation of a hydrotalcite with a gallery height of 9.8 A; increasing the reaction temperature to 70-100 degrees C and maintaining short contact times leads to a solid with a gallery height of 7.8 A. Both phases have been identified as a result of the intercalation of W(7)O(24)(6)(-) species in different orientations in the interlayer space. If the time of synthesis or the temperature is increased, a more stable phase, with a gallery height of 5.2 A corresponding to a solid with intercalated W(7)O(24)(6)(-), is formed, probably with grafting of the interlayer anion on the brucite-like layers. All systems are microporous. Calcination at 300 degrees C leads to amorphous species, and crystallized MgWO(4) is observed at 700 degrees C.     

微波法合成乙二醇插层镍铝层状双金属氢氧化物

乙二醇(EG)插层层状双金属氢氧化物(LDH)可作为层间催化反应器,用于原油中环烷酸与EG的酯化脱酸反应,但其合成过程需要较长时间。 以硝酸根型镍铝LDH为前体,在KOH促进下,采用微波辅助的离子交换法合成EG插层LDH,省时节能,提高效率。 考察了微波时间、微波温度和微波功率对EG插层LDH结构的影响。 并用XRD、FT-IR和TG-DSC等比较了微波法和常规方法合成的EG插层LDH的性质。 结果表明,微波辐射能提供高能量,促进待交换阴离子向层间的扩散,并减弱层板与层间原有阴离子间的作用力,在微波温度为120 ℃,微波时间为10 min和微波功率550 W的条件下,即可得到结晶度高的EG插层LDH。 微波法合成的EG插层LDH与常规方法合成的具有相似的性质和更高的结晶度,而合成时间可由12 h大幅缩短至10 min。     

Preparation and Characterization of Cu(II) Phthalocyanine Tetrasulfonate Intercalated and Supported on Layered Double Hydroxides

The aim of the present work was to synthesize and characterize layered doublehydroxides (LDHs), in the magnesium/aluminum form, intercalated with copper(II)phthalocyanine tetrasulfonate (CuPcTs). The metal complex was immobilized intothe LDH gallery region through the reconstitution method and this material wascharacterized by X-ray diffraction (XRD), surface area and porosity measurements,elementary analysis, thermogravimetry (TGA), vibrational (IR) and electronic(UV-visible) spectroscopies, and electronic paramagnetic resonance (EPR). Thecatalytic performance of CuPcTs intercalated and supported on the LDH wasevaluated by carrying out the hydrogen peroxide dismutation. The CuPcTs wassuccessfully intercalated into the LDH layers according to XRD data (the basalspacing of the carbonate precursors increases by approximately 15Å inthe intercalated samples). The surface area and porosity analysis suggested thatthe CuPcTs intercalated materials are not microporous solids. Samples containingthe metal complex confined between the LDH layers have an appreciable thermalstability: decomposition is not observed at least up to 400 °C. TGA experiments also show that the weight-loss curves of the CuPcTs supported samples superimpose those recorded for the CuPcTs complex and the LDH-carbonate while the curves for theintercalated materials are unique. CuPcTs intercalated or supported on LDHs is notactive in the hydrogen peroxide dismutation although the free form shows activity at pH above 8.     

Synthesis and adsorption properties of p-sulfonated calix[4 and 6]arene-intercalated layered double hydroxides

The intercalation of water-soluble p-sulfonated calix[4 and 6]arene (CS4 and CS6) in the interlayer of the Mg-Al and Zn-Al layered double hydroxide (LDH) by the coprecipitation method has been investigated, as well as the adsorption properties of the resulting CS/LDHs for benzyl alcohol (BA) and p-nitrophenol (NP) to prepare new microporous organic-inorganic hybrid adsorbents. The amount and arrangement of CS intercalated was different by the kind of the host metal ions. CS4 cavity axis was perpendicular for the Mg-Al LDH basal layer and parallel for the Zn-Al LDH basal layer, while CS6 cavity axis was perpendicular for both the LDH basal layers. In the BET surface area measurement, the surface area of the Zn-Al/CS4/LDH was four times than that of the Mg-Al/CS4/LDH, expecting that the former has higher adsorption capacity than the latter. In fact, the adsorption ability of the CS/LDHs for BA and NP in aqueous solution was found to be larger in the Zn-Al/CS4/LDH than in the Mg-Al/CS4/LDH. In addition, the adsorption ability of both the LDHs was larger in the CS6/LDHs than in the CS4/LDHs. These results were explained by the difference in the amount and arrangement of CS intercalated in the LDH interlayer space.     

Cyclodextrin-intercalated layered double hydroxides for fragrance release

In order to attain the controlled release of fragrance, the intercalation of cyclodextrins (CDs) and fragrance in layered double hydroxides (LDHs) was examined. Carboxymethyl-β-CDs (CMCDs) of various degrees of substitution as well as Mg–Al support were synthesized. CMCDs were intercalated into LDH by the reconstruction method. Powder X-ray diffraction, thermal gravimetric analyses and Fourier transform infrared indicated a successful intercalation of CMCDs into the LDH gallery. The retention capacities of the hybrid materials were investigated in aqueous phase and in gaseous solution by static headspace gas chromatography and multiple headspace extraction. The functionalization of the LDH with CMCD allowed the encapsulation of various organic guests and could prolong the fragrance release time in comparison to that from LDH without CMCD, which can be attributed to the inclusion of the fragrance compound in the CMCD cavity.     

Application of simplified version of advanced isoconversional procedure in non-isothermal kinetic study

Thermogravimetric analysis (TG) and powder X-ray diffraction (PXRD) were used to study some selected Mg/Al and Zn/Al layered double hydroxides (LDHs) prepared by co-precipitation. A Mg/Al hydrotalcite was investigated before and after reformation in fluoride and nitrate solutions. Little change in the TG or PXRD patterns was observed. It was proposed that successful intercalation of nitrate anions has occurred. However, the absence of any change in the d ₍₀₀₃₎ interlayer spacing suggests that fluoride anions were not intercalated between the LDH layers. Any fluoride anions that were removed from solution are most likely adsorbed onto the outer surfaces of the hydrotalcite. As fluoride removal was not quantified it is not possible to confirm that this has happened without further experimentation. Carbonate is probably intercalated into the interlayer of these hydrotalcites, as well as fluoride or nitrate. The carbonate most likely originates from either incomplete decarbonation during thermal activation or adsorption from the atmosphere or dissolved in the deionised water. Small and large scale co-precipitation syntheses of a Zn/Al LDH were also investigated to determine if there was any change in the product. While the small scale experiment produced a good quality LDH of reasonable purity; the large scale synthesis resulted in several additional phases. Imprecise measurement and difficulty in handling the large quantities of reagents appeared to be sufficient to alter the reaction conditions causing a mixture of phases to be formed.     

Synthesis and release behavior of composites of camptothecin and layered double hydroxide

A simple method, reconstruction of calcinated layered double hydroxides (CLDH) in an organic (ethanol)-water mixed solvent medium containing drug, was developed to intercalate partially a non-ionic and poorly water-soluble drug (camptothecin) into the gallery of layered double hydroxides (LDHs) to form the drug-LDH composites. The purpose of choosing organic-water mixed solvent is to increase remarkably the solubility of camptothecin (CPT) in the reconstruction medium. A probable morphology of CPT molecules in the gallery of LDHs is that CPT molecules arrange as monolayer with the long axis parallel to the LDH layers. The in vitro drug release from the composites was remarkably lower than that from the corresponding physical mixture, which shows these drug-inorganic composites can be used as a potential drug delivery system.     

Thermal evolution of carbonate pillared layered hydroxides with (Ni,L) (L = Fe,Co) based slabs: grafting or nongrafting of carbonate anions?

The thermal evolution, from room temperature up to 300 degrees C, of layered double hydroxides (LDHs) with (Ni, Co) or (Ni, Fe) based slabs and containing intercalated carbonate anions, was studied. A new lamellar phase, exhibiting a 6.5-6.6 A interslab distance, was observed in the 200-260 degrees C temperature range. The infrared study and the chemical analysis results allowed us to give prominence to a monografting of carbonate anions to the slabs. The thermogravimetric studies seem to indicate that intercalated water is first lost, followed by a monografting of carbonate anions. A stay in water of the 200 degrees C thermally treated phase leads to a reintercalation of water molecules. The interslab distance indeed reincreases up to the value of the pristine material, reinforcing the hypothesis of the monografing.     

Thermally Induced Growth of ZnO Nanocrystals on Mixed Metal Oxide Surfaces

An in situ method for the growth of ZnO nanocrystals on Zn/Al mixed metal oxide (MMO) surfaces is presented. The key to this method is the thermal treatment of Zn/Al layered double hydroxides (Zn/Al LDHs) in the presence of nitrate anions, which results in partial demixing of the LDH/MMO structure and the subsequent crystallization of ZnO crystals on the surface of the forming MMO layers. In a first experimental series, thermal treatment of Zn/Al LDHs with different fractions of nitrate and carbonate in the interlayer space was examined by thermogravimetry coupled with mass spectrometry (TG‐MS) and in situ XRD. In a second experimental series, Zn/Al LDHs with only carbonate in the interlayer space were thermally treated in the presence of different amounts of an external nitrate source (NH₄NO₃). All obtained Zn/Al MMO samples were analysed by electron microscopy, nitrogen physisorption and powder X‐ray diffraction. The gas phase formed during nitrate decomposition turned out to be responsible for the formation of crystalline ZnO nanoparticles. Accordingly, both interlayer nitrate and the presence of ammonium nitrate led to the formation of supported ZnO nanocrystals with mean diameters between 100 and 400 nm, and both methods offer the possibility to tailor the amount and size of the ZnO crystals by means of the amount of nitrate.     

The intercalation of metalloporphyrin complex anions into layered double hydroxides

Investigations to elucidate the structures of the cobalt(III) and manganese(III) complexes of tetra(p-sulfonatophenyl)porphinate anions (M(III)TSPP; M = Co and Mn), intercalated in Mg-Fe/Cl and Mg-Al/Cl layered double hydroxides (LDHs) have been carried out. Powder X-ray diffraction analysis, IR and UV-vis diffuse reflectance spectroscopy of Co(III)TSPP and Mn(III)TSPP intercalated into the interlayer spaces of LDH resulted in their perpendicular alignment against the host layers in the plane of the hybrid.     

Hydration, swelling, interlayer structure, and hydrogen bonding in organolayered double hydroxides: insights from molecular dynamics simulation of citrate-intercalated hydrotalcite

Molecular dynamics (MD) simulation of the Mg/Al (3:1) layered double hydroxide (LDH), hydrotalcite (HT), containing citrate, C6H5O7(3-), as the charge balancing interlayer anion provides new molecular scale insight into the interlayer structure, hydrogen bonding, and energetics of the hydration and consequent swelling of LDH compounds containing organic and biomolecules. Citrate-HT exhibits affinity for water up to very high hydration levels, in contrast to the preferred low hydration states of most LDHs intercalated with small, inorganic anions. This result is consistent with the recent experimental observation of the delamination of lactate-HT. The high water affinity is rationalized in terms of the preference of citrate ion for hydrogen bonds (H-bonds) donated from water molecules rather than from the hydroxyl groups of the metal hydroxide layer and the need to develop an integrated interlayer H-bond network among the citrate ions, water, and -OH groups of the hydroxide layers. The changes in the orientation of citrate molecules with progressive hydration are also intimately related to its preference to accept hydrogen bonds from water.     

The disorderly exfoliated LDHs/PMMA nanocomposites synthesized by in situ bulk polymerization: The effects of LDH-U on thermal and mechanical properties

The disorderly exfoliated layered double hydroxides/poly(methyl methacrylate) (LDHs/PMMA) nanocomposites were obtained in a two-stage process by the in situ bulk polymerization of methyl methacrylate (MMA) in the presence of 10-undecenoate intercalated LDH (LDH-U). The dispersed behavior of the LDH-U in the PMMA matrix was identified by using X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV/visible transmission spectroscopy. All these nanocomposites showed significantly enhancement of glass transition temperature (T_g) and the decomposition temperatures compared to pristine PMMA, as identified in differential scanning calorimetry (DSC) and thermogravimetric (TGA) analysis. The tensile modulus of these nanocomposites was also enhanced by incorporating the LDH-U into the PMMA matrix and increased as the amount of LDH-U increased. According to the analytical method of Ozawa-Flynn, the degradation activation energies of these nanocomposites are higher than that of pristine PMMA.