Femtosecond SRS-generation of coherent optical phonons in vanadate crystals m-LaVO<Subscript>4</Subscript> and t-GdVO<Subscript>4</Subscript> (SRS-phononics of the crystals)

Excitation of multicomponent trains of coherent optical phonons with different frequencies in monoclinic m-LaVO₄ and tetragonal t-GdVO₄ crystals under impulsive femtosecond SRS-lasing is reported.     

Preparation of Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles for superthermites by the detonation of an explosive nanocomposite material

This article reports on the preparation of chromium(III) oxide nanoparticles by detonation. For this purpose, a high explosive—hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX)—has been solidified from a solution infiltrated into the macro- and mesoporosity of Cr₂O₃ powder obtained by the combustion of ammonium dichromate. The resulting Cr₂O₃/RDX nanocomposite material was embedded in a cylindrical charge of pure explosive and detonated in order to fragment the metallic oxide into nanoparticles. The resulting soot contains Cr₂O₃ nanoparticles, nanodiamonds, amorphous carbon species and inorganic particles resulting from the erosion by the blast of the detonation tank wall. The purification process consists in (i) removing the carbonaceous species by an oxidative treatment at 500 °C and (ii) dissolving the mineral particles by a chemical treatment with hydrofluoric acid. Contrary to what could be expected, the Cr₂O₃ particles formed during the detonation are twice larger than those of initial Cr₂O₃. The detonation causes the fragmentation of the porous oxide and the melting of resulting particles. Nanometric droplets of molten Cr₂O₃ are ejected and quenched by the water in which the charge is fired. Despite their larger size, the Cr₂O₃ nanoparticles prepared by detonation were found to be less aggregated than those of the initial oxide used as precursor. Finally, the Cr₂O₃ synthesized by detonation was used to prepare a superthermite with aluminium nanoparticles. This material possesses a lower sensitivity and a more regular combustion compared to the one made of initial Cr₂O₃.     

Reactions of molybdenum atoms with NO,O<Subscript>2</Subscript>, N<Subscript>2</Subscript>O,and CO<Subscript>2</Subscript> molecules behind shock waves

Experimental results on the interaction of Mo atoms with various oxygen-containing molecules (NO, O₂, N₂O, and CO₂) at high temperatures (>1200 K) are presented, which are in close agreement with measurements at moderate and low temperatures. It is demonstrated that the height of the activation barrier is additionally increased for spin-forbidden reactions and that an increase in the heat of reaction causes an increase in the rate constant for a given type of reaction. For the reactions of Mo atoms with O₂ and N₂O, interpolated temperature dependences of the rate constants, based on the high-temperature measurements conducted in the present work and the published low-temperature data, are proposed.     

Reactions C<Subscript>2</Subscript>H<Subscript>2</Subscript> + OH and C<Subscript>2</Subscript> + H<Subscript>2</Subscript>O: Ab initio study of the potential energy surfaces

The stationary points of the potential energy surfaces for the reactions C₂H₂ + OH and C₂ + H₂O are calculated using density functional theory and the coupled cluster method. The relative energies and geometric parameters of the stable intermediates and transition states are in good agreement with the results of independent studies. In most cases, the relative energies differ from the earlier published values by no more than 3 kcal/mol, whereas the rotational constants, by 1–2%. The mechanism of the reaction CCOH₂ → C₂ + H₂O is studied in detail. The possible sources of errors in the calculation methods are examined.     

Bandgap-width correction for luminophores CaMoO<Subscript>4</Subscript> and CaWO<Subscript>4</Subscript>

Submicron-powder luminophores CaMoO₄ and CaWO₄ obtained via solid-phase reactions have been studied using diffuse-reflection (DR) spectroscopy and photoluminescence (PL) spectroscopy. It is found that the diffuse-reflection spectrum in the range of a fundamental absorption edge of <300 nm is distorted by PL overlapping, so that subsequent calculations of optical band gap E _g of luminophores CaMoO₄ and CaWO₄ result in an overestimation of this value. An algorithm for the correct processing of diffuse-reflection spectra is described. It is based on a subtraction of the photoluminescence spectrum in the range of fundamental absorption. The correct E _g values and energy values for the defect levels in the bandgap of CaWO₄ and CaMoO₄ are determined to amount to 4.78, 4.83, and 4.86 ± 0.01 eV and 3.97, 4.07, 4.16 ± 0.01 eV, respectively.     

Self-propagating high-temperature synthesis and magnetic features of Fe-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> granulated films

The classical solid-phase reaction between Fe₂O₃ and Al layers in thin films is initiated. It is shown that, in the reaction products, Fe granulated films are formed in the Al₂O₃ nonconducting matrix. Analysis of the reaction equation demonstrates that the volume fraction of iron in the granulated films is less than the percolation threshold. This determines the magnetic properties of iron clusters in a superparamagnetic state. It is assumed that the nanocrystalline microstructure exists in thin films after solid-phase reactions proceeding under conditions of self-propagating high-temperature synthesis.     

Mössbauer studies of magnetic Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/SiO<Subscript>2</Subscript> nanocomposites

A large variety of glass and glass ceramics may be obtained by sol-gel process from hydrolysis of tetraethoxysilane. The transformation involves hydrolysis and polycondensation reactions leading to the growth of clusters that eventually collide together to form a gel. The structure and properties of the final product have been found to be strongly dependent on the initial conditions of preparation. Silica nanocomposites based on Fe₂O₃/SiO₂ were prepared with the help of ultrasonic activation and subsequent annealing in nitrogen atmosphere or air with concentrations of iron oxide of about 20 to 30wt.%.     

Effect of synthesis on the magnetostrictive properties of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> spinel ferrite

The correlation between methods of synthesis and magnetostrictive properties of ferrite materials is investigated. CoFe₂O₄ spinel ferrite was synthesized using three techniques: solid-phase reactions, thermal hydrolysis, and sol-gel. The effect of the method of synthesis on the magnetostrictive properties of spinel ferrite is demonstrated.     

Thermal dissociation of the ErMn<Subscript>2</Subscript>O<Subscript>5</Subscript> compound

Phase equilibria in the Er-Mn-O system have been studied by the static method on vacuum circulation setup at 1010–1160 K with subsequent X-ray diffraction analysis of the quenched solid phases with step-by-step removal of oxygen from the ErMn₂O₅ compound. It is established that ErMn₂O₅ dissociation occurs in three stages. The temperature dependences of the equilibrium oxygen pressure are experimentally determined for the found phase equilibria. The changes in the standard thermodynamic functions of the reactions of dissociation and formation of ErMn₂O₅ and ErMnO₃ from elements are calculated.     

Direct observation of intracluster reactions induced in (CF<Subscript>3</Subscript>I)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> clusters by femtosecond ultraviolet radiation

Intracluster reactions that are induced in (CF₃I) _n clusters by femtosecond ultraviolet radiation, including the reaction of the formation of the I₂⁺ molecular ion, have been directly observed. It has been shown that there are two channels of the formation of I₂⁺ ions with the characteristic times τ₁ ≈ 1 ps and τ₂ ≈ 7 ps. A model of these reactions has been proposed that is in good agreement with the experimental data.     

Fluorimetry Studies of Oscillating Chemilumnescence in the Luminol= H<Subscript>2</Subscript>O<Subscript>2</Subscript>= KSCN= CuSO<Subscript>4</Subscript>= TMAOH System

Oscillating chemical reactions are complex systems, involving a large number of chemical species. In oscillating chemical reaction, some species, usually a reaction intermediate, exhibit fluctuation in its concentration. In this report, visible oscillating chemiluminescence produced by the addition of luminol (3-aminophthalhydrazide) to the oscillating system of H₂O₂=KSCN=CuSO₄=TMAOH was investigated using spectrofluorimetry method. The effects of ingredient concentration of the oscillating system and complexing agents like citric acid and cysteine on the behavior of the oscillating system were investigated. Moreover, the influence of nonaqueous solvents such as ethanol and ethylene glycol has been studied.     

Destabilization and enhanced dehydriding reaction of LiNH<Subscript>2</Subscript>: an electronic structure viewpoint

First-principles calculations have been applied to lithium amide, LiNH₂, to characterize its electronic structure. Based on the theoretical study, we predict that an effective method for destabilizing LiNH₂ is to partially substitute Li by other elements with larger electronegativity, such as Mg. Experimental results on dehydriding reactions of LiNH₂ with/without the partial Mg substitutions suggest the destabilization of the samples with increasing Mg concentrations, which is in good agreement with our prediction. The dehydriding reactions of LiNH₂ with partial Mg substitutions are useful as hydrogen-storage materials for fuel-cell applications. PACS 81.05.Zx; 71.20.Ps; 82.30.-b     

CeO<Subscript>2</Subscript> and Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> modified Ni-YSZ anode for solid oxide fuel cell

Ni sintering at high temperature (～ 800 °C) operation drastically degrades the performance of Ni-yttria-stabilized zirconia (YSZ) anode in solid oxide fuel cell (SOFC). Mixed ionic and electronic conductive oxides such as CeO₂ and Nb₂O₅ enhance the dispersion of Ni, CeO₂ enhances the redox behavior and promotes charge transfer reactions, and Nb₂O₅ increases the triple phase boundary. In the present work, anode-supported SOFC is fabricated and tested in H₂ fuel at 800 °C. YSZ and lanthanum strontium manganite (LSM)-YSZ are used as the electrolyte and composite cathode with NiO-YSZ, CeO₂-NiO-YSZ, and Nb₂O₅-NiO-YSZ as an anode. The peak power density obtained for the cell with 10% CeO₂–30% NiO-YSZ anode at the 5 and 25 h of operation is 330 and 290 mW cm^?2 which is higher than that for 40% NiO-YSZ anode (275 mW cm^?2 at 5 h). The peak power density obtained for the cell with 10% Nb₂O₅–30% NiO-YSZ anode at the 5 and 25 h of operation is 301 and 285 mW cm^?2 which is higher than that for 40% NiO-YSZ anode (275 mW cm^?2 at 5 h). Physical characterization has been carried to study morphology, elemental analysis, particle size, and phase formation of the fabricated anode before and after cell operation to correlate the cell performance.     

Interface reactions in [Fe/B]<Subscript>n</Subscript> multilayers: a way to tune from crystalline/amorphous layer sequences to homogeneous amorphous Fe<Subscript>x</Subscript>B<Subscript>100-x</Subscript> films

[Fe/B]_{n ≥2} multilayers were prepared by thermal evaporation, ion-beam sputtering and laser ablation. By applying in situ electron spectroscopies (UPS, XPS) and monitoring the electrical resistance during layer growth, evidence could be provided for the occurrence of interface reactions within the range of studied deposition temperatures (77 K ≤T ≤300 K). These reactions result in amorphous Fe_xB_100-x phases, which are spatially restricted to a width of less than 3 nm at the original interface. The amorphicity of the reacted interlayers was unequivocally proven by additional high-resolution electron microscopy (HRTEM) and their characteristically changed magnetic properties. Due to the well-defined width of the interface reaction, homogeneous amorphous Fe_xB_100-x films can be obtained by reducing the individual Fe and B layer thicknesses to below the above reaction depth, while for larger thicknesses layer sequences of the crystalline/amorphous/crystalline type will result. Received: 30 January 2002 / Accepted: 31 January 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +49-731/502-2963, E-mail: hans-gerd.boyen@physik.uni-ulm.de     

Preparation,Structure, and Dielectric and Magnetic Properties of SrFe<Subscript>2/3</Subscript>W<Subscript>1/3</Subscript>O<Subscript>3</Subscript> Ceramics

Polycrystalline samples of SrFe_2/3W_1/3O₃ (SFWO) ceramic were obtained by solid-phase reactions with subsequent sintering using conventional ceramic technology. X-ray diffraction analysis showed that at room temperature, the SFWO ceramic is single-phase and has a perovskite-type structure with tetragonal symmetry and parameters a = 3.941(9) Å, c = 3.955(6) Å, and c/a = 1.0035. In studying the magnetic properties and the Mössbauer effect in SFWO ceramics, it is found that the material is a ferrimagnet, and the iron ions are only in the valence state of Fe³⁺. It is suggested that in the temperature range of T = 150–210°C, a smeared phase transition from a cubic (paraelectric) phase to a tetragonal (ferroelectric) phase takes place in SFWO with decreasing temperature.     

Synthesis of submicron CaZrO<Subscript>3</Subscript> in combustion reactions

Submicron CaZrO₃ powder is obtained in combustion reactions (solution combustion synthesis—SCS) with glycine. It is found that SCS reduces the sintering temperature of CaZrO₃ powders. The dielectric properties of calcium zirconate ceramics are studied by the electrochemical impedance method. It is shown that a ceramics of powders obtained by the SCS method has high dielectric characteristics.     

Enhancement of electrochemical properties of Ca<Subscript>3</Subscript>Co<Subscript>4</Subscript>O<Subscript>9</Subscript> as anode materials for lithium-ion batteries by transition metal doping

Misfit-layered calcium cobaltites (Ca₃Co₄O₉, Ca₃Co_3.9Fe_0.1O₉, and Ca₃Co_3.9Mn_0.1O₉), as anode materials for lithium-ion batteries, were synthesized by a simple hydro-decomposition method. All synthesized samples do not show any impurity phase. They exhibited plate-like particle with the particle size of 1–2 μm. The specific capacities of doped samples showed higher electrochemical performance compared to the undoped sample. After charge/discharge of 50 cycles, the specific capacities of Ca₃Co₄O₉, Ca₃Co_3.9Fe_0.1O₉, and Ca₃Co_3.9Mn_0.1O₉ were 343, 562, and 581 mAh g^?1, respectively. The doped samples showed an increase of over 60% compared to the undoped sample. The cyclic voltammetry profile of the doped samples showed the enhanced reactivity corresponding to their improved electrochemical performance. The capacity improvement of doped samples resulted from the metal oxide/Li conversion reactions, volume change, and high reactivity.     

Luminescent and photochemical processes in CdBr<Subscript>2</Subscript> : AgCl crystals

This paper reports on the results of the investigation into the optical luminescence properties of photochromic crystals CdBr₂ : AgCl grown by the Bridgman-Stockbarger method. It has been shown that, under X-ray, optical, and N₂-laser excitations of the grown crystals, there occurs emission due to Ag⁺ impurities in addition to emission from centers characteristic of CdBr₂. The photostimulated chemical reactions occurring in CdBr₂ : AgCl lead to a weakening of the luminescence and to a change in its spectral composition. Models of photosensitive centers and centers of photochemical coloring have been proposed. The mechanisms of the photochromic effect have been considered. The nature of luminescent and trapping centers has been discussed.     

Corrections to the generalized vector dominance due to diffractive ρ<Subscript>3</Subscript> production

The idea of the vector dominance is still in use in various analyses of the experimental data of photon–hadron reactions. It makes sense, therefore, to recast results of microscopic calculations of such reactions in this language. Here we present the diffractive DIS ρ₃ production as a specific correction to generalized vector dominance. We perform a coupled channel analysis of spin–orbital excitations in diffractive photoproduction and reiterate the point that ρ₃ in diffractive DIS will be sensitive to a novel aspect of diffraction.