Contactless conductivity biosensor in microchip containing folic acid as bioreceptor

We report a glass/PDMS-based microfluidic biosensor that integrates contactless conductivity transduction and folic acid, a target for tumor biomarker, as a bioreceptor. The device presents relevant advantages such as direct determination--dismiss the use of redox mediators as in faradaic electrochemical techniques--and the absence of the known drawbacks related to the electrode-solution interface. Characterizations of the functionalization processes and chemical sensor are described in this communication.     

EOF measurement by detection of a sampling zone with end-channel amperometry in microchip CE

A simple method for EOF measurement by detection of sampling zones with end-channel amperometry in microchip CE is developed. This method is based on the principle of the Kohlrausch regulating function (KRF). A dilute electroactive ionic species is added to the BGE as a continuously eluting electrophore which is used as a probe. When a BGE-like sample at a different concentration is injected, a peak of sampling zone appears and the migration time is related to EOF. In a microchip CE with hybrid PDMS/glass channel, a cathodic EOF of the hybrid glass/PDMS microchip was measured by end-channel amperometry; the effects of sample concentration and different probes on EOF rate were discussed. The present method was applied to monitor EOF rates in glass and in PDMS microchips. There was no significant difference between the values of EOF rates measured by the present method and the current-monitoring method. Detection of nonelectroactive analytes K(+), Na(+), and Li(+) can also be accomplished by the indirect amperometric method. Hence, the effective mobility of analyte can be accurately obtained.     

Contactless conductivity detection of selected organic ions in on-chip electrophoresis

The detection of underivatized anionic sulfonates, carboxylates, amino acids, sugars, and artificial sweeteners, and of cationic dopamine, ephedrine, and metanephrine in microfabricated electrophoresis devices is demonstrated. This was achieved by high-voltage contactless conductivity measurements with external electrodes. Poly(methyl methacrylate) chips with thin covers to enable sensitive contactless detection were used for most determinations but glass microchips had to be employed for amino acids and sugars. The plastic chips were found not be stable in the alkaline media required to render those two classes of species in the ionic form amenable for separation and detection. The reproducibility of peak area measurements was about 1% or better and the detection limits ranged between 1 and 30 microM for the different compounds examined.     

Direct detection of renal function markers using microchip CE with pulsed electrochemical detection

Creatinine, creatine, and uric acid are three important compounds that are measured in a variety of clinical assays, most notably for renal function. Traditional clinical assays for these compounds have focused on the use of enzymes or chemical reactions. Electrophoretic microchips have the potential to integrate separation power of capillary electrophoresis with devices that are small, portable, and have the speed of conventional sensors. The development of a microchip CE system for the direct detection of creatinine, creatine, and uric acid is presented. The device uses pulsed amperometric detection (PAD) to detect the nitrogen-containing compounds as well as the easily oxidizable uric acid. Baseline separation of creatinine, creatine and uric acid was achieved using 30 mM borate buffer (pH = 9.4) in less than 200 s. Linear calibration curves were obtained with limits of detection of 80 microM, 250 microM and 270 microM for creatinine, creatine and uric acid respectively. An optimization of the separation conditions and a comparison of PAD with other amperometric detection modes is also shown. Finally, analysis of a real urine sample is presented with validation of creatinine concentrations using a clinical assay kit based on the Jaffé reaction.     

Contactless conductivity detection for microfluidics: designs and applications

Different methods for construction of contactless conductivity detectors (CCD) for microchip electrophoresis device are described in this review. This includes three main schemes of CCD for microchips, such as (i) the detection electrodes are placed along the microchannel from outside of the microchip and they are insulated from the channel by the cover lid of microchip device; (ii) the electrodes are placed across of the microchannel in the same plane and they are insulated by thin separation channel walls and (iii) electrodes are buried in widened part of microchannel and they are insulated from solution by ultrathin layer of silicon carbide. Specific issues related to the CCD on microfluidics are discussed, such as an influence of shape and magnitude of ac voltage and placement of electrodes and their insulation. Various applications for security, pharmacological, bioassays and food analysis purposes are described.     

Contactless conductivity detection of synthetic polymers in non-aqueous size-exclusion electrokinetic chromatography

A capacitively coupled contactless conductivity detection (CCD) system has been applied for the detection of neutral synthetic polymers in capillary size-exclusion electrokinetic chromatography (SEEC). Polystyrene standards, that were used as a model compounds, were separated on a capillary column packed with porous 10 microm silica particles with an electrokinetically driven mobile phase, and detected by CCD and UV detection simultaneously. Mass-calibration curves for polystyrene were constructed. Satisfactory results were obtained for the linearity, the run-to-run repeatability (<0.2% for the relative retention and <4% for the peak area) and the robustness of the detector. One of the major issues in this preliminary study was to investigate the origin of the peaks observed for the polystyrene standards. The effect of the molar mass of the polystyrenes on the sensitivity was small. Therefore, the signals obtained could not be explained as the result of an increased viscosity and a decreased solution conductivity of the solute zone. An alternative hypothesis is suggested, and recommendations for further research are given.     

Contactless conductivity detection for screening myrosinase substrates by capillary electrophoresis

Myrosinase is a unique enzyme that catalyzes the hydrolysis of glucosinolates (GLS) to isothiocyanate (ITC), glucose and sulfate. Isothiocyanates display a diversified very interesting biological activity. In this study, capillary electrophoresis (CE) was used for the first time for evaluating myrosinase kinetics (maximum velocity V_max and Michaelis–Menten constant K_m) and to assess the affinity of a variety of substrates toward this enzyme.     

Characterization of a capacitance-coupled contactless conductivity detection system with sidewall electrodes on a low-voltage-driven electrophoresis microchip

A new type of capacitance-coupled contactless conductivity detection (C⁴D) system with sidewall electrodes was proposed for integration on a silicon-on-isolator–poly(dimethylsiloxane) (SOI-PDMS) hybrid low-voltage-driven electrophoresis microchip. By a microelectromechanical system process, the sidewall electrodes were fabricated precisely at either side of the separation channel. The area of the capacitor electrodes was the maximum value to improve the detection sensitivity with an enhanced capacitance effect. According to the simulation results, the structural parameters of the sidewall electrodes were determined as 550-μm length, 15-μm width, 80-μm separation distance, and 1-μm isolator thickness. The integrated microdevice with the SOI-PDMS hybrid electrophoresis microchip was very compact and the size was only 15 cm × 15 cm × 10 cm (width × length × height), which permitted miniaturization and portability. The detector performance was evaluated by K⁺ testing. The detection limit of the conductivity detector was determined to be 10^-9 and 10^-6 M for K⁺ in the static and electric-driven modes, respectively. Finally, the C⁴D was applied to low-voltage-driven electrophoresis on a microchip to carry out real-time measurement of the separation of amino acids. The separations of 10^-4 M lysine and phenylalanine in the low-voltage-driven electrophoresis mode were performed with an electric field of 300 V/cm and were completed in less than 15 min with a resolution of 1.3. The separation efficiency was found to be 1.3 × 10³ and 2.8 × 10³ plates for lysine and phenylalanine, respectively, with a migration time reproducibility of 2.7 and 3.2%. The conductivity detection limit of amino acids achieved was 10^-6 M. The proposed method for the construction of a novel C⁴D integrated on an SOI-PDMS hybrid low-voltage-driven electrophoresis microchip showed the most extensive integration and miniaturization of a microdevice, which is a further crucial step toward the realization of the “lab-on-a-chip” concept.     

Capillary and microchip electrophoresis of basic drugs with contactless conductivity detection

The extension of contactless conductivity detection in electrophoresis to the determination of basic drugs is demonstrated using beta-adrenergic blocking agents (beta-blockers) and other physiologically active amines as examples. The high-voltage approach to conductivity detection was employed for conventional capillaries as well as microchip devices. Acidic buffers were used in all cases. A buffer consisting of 100 mM acetic acid and 1 mM histidine was deemed most optimal for the separation of six beta-blockers and best results for the analysis of the other amines were achieved with a 20 mM lactic acid buffer at low pH-value. The detection limits ranged from 0.06 to 5 microM. To demonstrate potential practical applications, a main component assay was conducted for three pharmaceutical formulations. On-chip, five pharmaceutical amines could be baseline-resolved in a 8 cm long microchannel in 90 s, albeit a reduced sensitivity and peak capacity compared to conventional capillary electrophoresis.     

Determination of PCR products by CE with contactless conductivity detection

The use of CE with contactless conductivity detection for the determination of PCR products is demonstrated for the first time. The separation of specific length PCR products according to their size could be achieved using 5% PVP as a sieving medium in a separation buffer consisting of 20 mM Tris and 20 mM 2‐(cyclohexylamino)ethansulphonic acid (pH 8.5). A fused silica capillary of 60 cm length and 50 μm id and an applied separation voltage of –15 kV were employed and separations could be completed within 20–50 min. PCR amplified DNA fragments of different sizes obtained from different bacterial plasmid templates as well as a fragment from genomic DNA of genetically modified soybeans could be successfully identified.     

Study of injection bias in a simple hydrodynamic injection in microchip CE

The electrokinetically pinched method is the most commonly used mode for sample injection in microchip capillary electrophoresis (microCE) due to its simplicity and well-defined sample volume. However, the limited injection volume and the electrophoretic bias of the pinched injection may limit its universal usage to specific applications. Several hydrodynamic injection methods in microCE have been reported; however, almost all claimed that their methods are bias-free without considering the dispensing bias. To investigate the dispensing bias, a simple hydrodynamic injection was developed in single-T and double-T glass microchips. The sample flow was produced by hydrostatic pressure generated by the liquid level difference between the sample reservoir and the other reservoirs. The reproducibility of peak area and peak area ratio was improved to a significant extent using large-surface reservoirs for the buffer reservoir and the sample waste reservoir to reduce the Laplace pressure effect. Without a voltage applied on the sample solution, the voltage-related sample bias was eliminated. The dispensing bias was analyzed theoretically and studied experimentally. It was demonstrated that the dispensing bias existed and could be reduced significantly by appropriately setting up the voltage configuration and by controlling the appropriate liquid level difference.     

Analysis of flavonoids by CE using capacitively coupled contactless conductivity detection

A CE method employing capacitively coupled contactless conductivity (C(4)D) compared to indirect UV-detection was developed for the analysis of phytochemically relevant flavonoids, such as 6-hydroxyflavone, biochanin A, hesperetin and naringenin. To ensure fast separation at highest selectivity, sensitivity and peak symmetry, the pH value and the concentration of the running BGE had to be optimized regarding both co- and counter-EOF mode. Optimum conditions were found to be 1.0 and 5.0 mM chromate BGE (pH 9.50) in the counter- and co-EOF mode, respectively. Validation of the established CE-C(4)D method pointed out to be approximately seven times more sensitive compared to indirect UV-detection applying the same conditions. The lower LOD defined at an S/N of 3:1 was found between 0.12 and 0.21 microg/mL for the analytes of interest using C(4)D and between 0.77 and 1.20 microg/mL using indirect UV-detection. Compared to an earlier published CE method employing direct UV-detection, C(4)D was found to be approximately two times more sensitive. Due to the lower baseline noise, C(4)D showed an excellent regression coefficient >0.99 compared to 0.93 when using indirect UV detection calibrating within a concentration range between 1 and 10 microg/mL. The influence of the sugar moiety on the conductivity of a flavonoid was studied upon the analysis of the aglycon hesperetin and the rutinosid hesperidin. The sugar moiety in hesperedin shows a higher conductivity compared to hesperetin. Finally, the optimized established CE-C(4)D method was applied to the determination and quantification of naringenin in Sinupret.     

Contactless conductivity detection for analytical techniques: Developments from 2016 to 2018

The publications concerning capacitively coupled contactless conductivity detection for the 2‐year period from mid‐2016 to mid‐2018 are covered in this update to the earlier reviews of the series. Relatively few reports on fundamental investigations or new designs have appeared in the literature in this time interval, but the development of new applications with the detection method has continued strongly. Most often, contactless conductivity measurements have been employed for the detection of inorganic or small organic ions in conventional capillary electrophoresis, less often in microchip electrophoresis. A number of other uses, such as detection in chromatography or the gauging of bubbles in streams have also been reported.     

Separation of non-UV-absorbing synthetic polyelectrolytes by CE with contactless conductivity detection

A specific method for the separation and detection of non-UV-absorbing polyelectrolytes has been developed. The analysis of such polyelectrolytes by liquid chromatography is nearly impossible due to strong ionic interactions and charge density effects. CE makes use of these charge density effects and thus enables for proper separation. A capacitively coupled contactless conductivity detector has been applied for the detection in CE. A low molar mass poly(acrylic acid) sodium salt standard (PAA1.3k) was separated in free solution CE and detected with the contactless conductivity detector. Different amphoteric electrolytes have been tested for their applicability as BGE for the separation of polyelectrolytes with conductivity detection. It has been shown that the best detection results are obtained with an arginine-sorbate buffer.     

Rapid sample screening method for authenticity controlling vanilla flavors using a CE microchip approach with electrochemical detection

Five vanilla-related flavors of food significance, vanillic alcohol (VOH), ethyl maltol (EMA), maltol (MAL), ethyl vanillin (EVA) and vanillin (VAN), were separated using CE microchips with electrochemical detection (CE-ED microchips). A +2 kV driving voltage for both injection and separation operation steps, using a borate buffer (pH 9.5, 20 mM) and 1 M nitric acid in the detection reservoir allowed the selective and sensitive detection of the target analytes in less than 200 s with reproducible control of EOF (RSD(migration times)<3%). The analysis in selected real vanilla samples was focusing on VAN and EVA because VAN is a basic fragrance compound of the vanilla aroma, whereas EVA is an unequivocal proof of adulteration of vanilla flavors. Fast detection of all relevant flavors (200 s) with an acceptable resolution (R(s) >1.5) and a high accuracy (recoveries higher than 90%) were obtained with independence of the matrices and samples examined. These results showed the reliability of the method and the potential use of CE microchips in the food control field for fraudulent purposes.     

A thin cover glass chip for contactless conductivity detection in microchip capillary electrophoresis

A microfabricated thin glass chip for contactless conductivity detection in chip capillary electrophoresis is presented in this contribution. Injection and separation channels were photolithographed and chemically etched on the surface of substrate glass, which was bonded with a thin cover glass (100 μm) to construct a new microchip. The chip was placed over an independent contactless electrode plate. Owing to the thinness between channel and electrodes, comparatively low excitation voltage (20–110 V in V_p–p) and frequency (40–65 kHz) were suitable, and favorable signal could be obtained. This microchip capillary electrophoresis device was used in separation and detection of inorganic ions, amino acids and alkaloids in amoorcorn tree bark and golden thread in different buffer solutions. The detection limit of potassium ion was down to 10 μmol/L. The advantages of this microchip system exist in the relative independence between the microchip and the detection electrodes. It is convenient to the replacement of chip and other operations. Detection in different position of the channel would also be available.     

A novel microchip based on indium tin oxide coated glass for contactless conductivity detection

A microfluidic chip manufactured from glass substrate and indium tin oxide (ITO) coated glass use for contactless conductivity detection was developed. The detecting electrodes were fabricated by screen-printing and chemical etching methods using an ITO-coated glass wafer. Then, the glass substrate containing separation channels was bonded with the bare side of the processed ITO-coated glass, thus producing an electrophoresis chip integrated with contactless conductivity detector. The prepared microchip displayed considerable stability and reproducibility. Sensitive response was obtained at optimal conditions (including the gap between electrodes, excitation frequency, and excitation voltage). The feasibility of this microfluidic device was examined by detection of inorganic ions, and further demonstrated by the quantification of aminopyrine and caffeine in a compound pharmaceutical. The two ingredients can be completely separated within 1 min. The detection limits were 8 μg mL⁻¹ and 3 μg mL⁻¹, respectively; with the correlation coefficient of 0.996-0.998 in the linear range from 10 μg mL⁻¹ to 800 μg mL⁻¹. The results have showed that the present method is sensitive, reliable and fast.     

A microchip electrophoresis system with integrated in-plane electrodes for contactless conductivity detection

We present a new approach for contactless conductivity detection for microchip-based capillary electrophoresis (CE). The detector integrates easily with well-known microfabrication techniques for glass-based microfluidic devices. Platinum electrodes are structured in recesses in-plane with the microchannel network after glass etching, which allows precise positioning and batch fabrication of the electrodes. A thin glass wall of 10-15 microm separates the electrodes and the buffer electrolyte in the separation channel to achieve the electrical insulation necessary for contactless operation. The effective separation length is 34 mm, with a channel width of 50 microm and depth of 12 microm. Microchip CE devices with conductivity detection were characterized in terms of sensitivity and linearity of response, and were tested using samples containing up to three small cations. The limit of detection for K+ (18 microM) is good, though an order of magnitude higher than for comparable capillary-based systems and one recently reported example of contactless conductivity on chip. However, an integrated field-amplified stacking step could be employed prior to CE to preconcentrate the sample ions by a factor of four.     

微芯片毛细管电泳非接触电导法快速测定盐酸倍他洛尔

建立了微芯片毛细管电泳非接触电导检测法快速测定盐酸倍他洛尔滴眼液中盐酸倍他洛尔的含量。探讨了缓冲液类型、浓度、分离电压及进样时间等因素对分离检测的影响。实验采用1.5 mmol·L-1HAc-1.5mmol·L-1Na Ac(p H=4.69)为缓冲溶液,分离电压为2.1 k V,进样时间10.0 s。此条件下于0.7 min内实现了盐酸倍他洛尔的快速分离测定。盐酸倍他洛尔的浓度在5.0~200.0μg·m L-1线性良好(r=0.9997,n=6),检出限为1.0μg·m L-1(S/N=3),RSD为0.8%,样品的加标回收率为100.4%~102.0%。滴眼液中的辅料在该条件下不干扰测定,可成功测定盐酸倍他洛尔滴眼液中盐酸倍他洛尔的含量。