Fault-tolerant polarization-insensitive photonic delay line architectures using two-dimensional digital micromirror devices

A binary multichannel photonic delay line (PDL) module is introduced that gives balanced loss switched states and a polarization-insensitive operation via the use of binary operation Digital Micromirror Devices (DMDs). Experimental demonstration of a DMD-based PDL architecture is performed for a 6.84-ns time delay design. Experimental results include a 25-beam feed interchannel crosstalk test indicating a <−60 dB optical interchannel crosstalk level for a 0.381 mm interchannel distance in the multichannel PDL. An average optical signal-to-leakage noise ratio of 35.33 dB is measured for this PDL. A butterfly design PDL optical architecture is proposed for minimizing loss and improving assembly accuracy. These DMD-based variable PDLs can be used in applications ranging from radio frequency (RF) fiber-optic signal processing systems to adaptive optics for astronomical and laser radar arrays.     

光纤化学传感技术研究近况

光纤化学传感器作为传感器的一个重要分支,结合了化学和光学的相关技术,将化学制膜、光纤技术以及化学分析中的分光光度法、拉曼光谱、荧光光谱、折射率检测等方法相融合,以其微型化,抗电磁干扰,传输信息量大,拥有自身参比等特点不断向前发展。简要综述了光纤化学传感技术研究近况和未来的发展趋势。重点对光纤pH化学传感器、光纤离子化学传感器和光纤气体化学传感器进行了介绍。简要分析了常见的敏感膜制备方法如化学键合法和溶胶凝胶(sol-gel)等方法。新型光纤——微结构光纤的出现为光纤化学传感器开辟了新的发展方向。由于其具有大的内表面积,结构设计灵活多样,光纤内部提供感应场所等特点,快速度成为光纤化学传感器的重要发展方向和研究热点。对微结构光纤衍生而来的新型光纤化学传感器进行了详细评述, 最后对光纤化学传感器的未来进行展望。     

Feasibility study on fiber-optic goniometer for measuring knee joint angle

In this study, we fabricated a fiber-optic goniometer using a plastic optical fiber, a light-emitting diode, and a photodiode. The cladding of the plastic optical fiber was removed at 0.5–3mm intervals regularly to increase the bending loss of the plastic optical fiber. Also, the output voltages of the photodiode based on light intensity that measured using the fiber-optic goniometer were measured light intensities using the fiber-optic goniometer were measured to evaluate the linearity of the fiber-optic goniometer. Finally, we measured the responses of the fiber-optic goniometer for gait speeds of 3, 5, and 10 km/h using a data acquisition board and a LabVIEW program.     

光纤microphone的理论与实验研究

本文提出了一种新型的反射式光纤ｍｉｃｒｏｐｈｏｎｅ ,它把反射式光纤传感探头应用于传统的麦克风上,来实现对声波的调制．本文从理论和实验两方面给出了反射式光纤ｍｉｃｒｏｐｈｏｎｅ的光强调制函数,并对反射式光纤ｍｉｃｒｏｐｈｏｎｅ系统进行了研究．     

光纤在现代海军中的应用

着重叙述光纤目前在海军最有发展前途的几个领域(光纤通信、光纤制导鱼雷、导弹、光纤陀螺和光学水听器等)的应用。     

Schemes of a fiber-optic multiplexing sensor array based on a 3 X 3 star coupler

A Michelson-based fiber-optic low-coherence interferometric quasi-distributed sensing system permitting absolute length measurement in a sensor array is proposed. The main part of the sensing system is a fiberoptic 3 x 3 star coupler. The architecture of fiber-optic sensors can be easily realized as a linear sensor array, twin sensor arrays, or a loop sensor array. The proposed sensing scheme will be useful for the measurement of strain distribution. An important application could be deformation sensing in smart structures. A six-sensor array is demonstrated experimentally.     

Study of a fiber-optic LAN with a distributed controller

In this paper the performance of a fiber-optic LAN with spread spectrum multiplexing is discussed from the viewpoint of transmission parameters. Two architectures are considered. The first concerns a structure with cascade-connected Y-type fiber-optic couplers. The second concerns an architecture with cascade-connected active optoelectronic repeater-coupler (ORCA) devices.     

Power-efficient nonreciprocal interferometer and linear-scanning fiber-optic catheter for optical coherence tomography

A nonreciprocal fiber-optic interferometer is demonstrated in an optical coherence tomography (OCT) system. The increased power efficiency of this system provides a 4.1-dB advantage over standard Michelson implementations. In addition, a new linear-scanning fiber-optic catheter is demonstrated that avoids the rotary optical junction that is required in circumferential scanning systems. These advancements have permitted the clinical implementation of OCT imaging in the human gastrointestinal tract.     

A fiber-optic voltage sensor based on macrobending structure

We propose and demonstrate an optical voltage sensing scheme based on a macrobending optical fiber in a ratiometric power measurement system. This novel approach to sensing has not been utilized before and has the advantage that the sensor involves simple fabrication compared to existing fiber-optic voltage sensors. To prove the feasibility of such a fiber-optic sensor, a sensor for a voltage range from 0∼100 V is demonstrated, with a resolution of 0.5 V. The sensor is robust, linear, and shows a competitive measurement resolution. The sensor can be easily scaled to suit other voltage levels and be effectively combined with optical current sensors.     

All-fiber wavemeter and Fourier-transform spectrometer

An all-fiber Fourier-transform spectrometer is proposed and demonstrated, based on the diffraction of light through the side of a standard optical fiber by a UV-induced fiber grating. The interference pattern, whose Fourier transform yields the optical spectrum, is formed by light diffracted from counterpropagating modes in the fiber. The device is simple and compact and functions as a wavemeter, a fiber-optic network monitor, or a tool for fabrication and testing of long fiber Bragg gratings.     

干涉式光纤陀螺光路偏振特性的理论分析

首次采用琼斯矩阵建立了消偏型干涉式光纤陀螺完整光路传输系统的数学模型。在此基础上进行了光路偏振特性的理论分析,讨论了各器件的性能对陀螺偏振噪声的影响,分析了光纤消偏器的消偏作用。通过分析计算,得到了消偏型干涉式光纤陀螺的最大偏振误差表达式。在不同精度级别的消偏型光纤陀螺中,计算出了光纤消偏器应该达到的精度要求,为今后减小零漂打下了理论基础。     

一种高稳定、高分辨率的光纤位移检测系统

介绍一种大量程、高分辨率、高稳定的光纤传感位移测量系统。该系统基于反射式强度调制机制,由光发射机、传感器、光接收机三部分组成。系统通过采用调制、解调、窄带滤波,信号支路和参考支路双通道相比测量等技术措施,来保证系统的高稳定性和高分辨率。实验还表明测量中应尽量使用朗伯特平面作为光反射面,以解决二次安装的重复性问题。     

Integrated multimodal endomicroscopy platform for simultaneous en face optical coherence and two-photon fluorescence imaging

We report an all-fiber-optic scanning, multimodal endomicroscope capable of simultaneous optical coherence tomography (OCT) and two-photon fluorescence (TPF) imaging. Both imaging modalities share the same miniature fiber-optic scanning endomicroscope, which consists of a double-clad fiber with a core operating in single mode at both the OCT (1310 nm) and two-photon excitation (1550 nm) wavelengths, a piezoelectric two-dimensional fiber-optic beam scanner, and a miniature aspherical compound lens suitable for simultaneous acquisition of en face OCT and TPF images. A fiber-optic wavelength division multiplexer was employed in the integrated platform to combine the low coherence OCT light source and the femtosecond two-photon excitation laser into the same optical path. Preliminary imaging results of cell cultures and mouse tissue ex vivo demonstrate the feasibility of simultaneous real-time OCT and TPF imaging in a scanning endomicroscopy setting for the first time.     

Simplified Formula of Bending Loss for Optical Fiber Sensors

A simple fiber-optic bending loss formula is achieved for optical fiber sensors. This simple formula considers various bending radii, number of turns, extra bending angle, and wavelength and has good agreement with theoretical and experimental data. We also propose a simplified formula for sensitivity of the fiber-optic bending loss in this article. The defined sensitivity formula has the benefit of showing parameters for fiber-optic bending sensor systems.     

Simplified Formula of Bending Loss for Optical Fiber Sensors

A simple fiber-optic bending loss formula is achieved for optical fiber sensors. This simple formula considers various bending radii, number of turns, extra bending angle, and wavelength and has good agreement with theoretical and experimental data. We also propose a simplified formula for sensitivity of the fiber-optic bending loss in this article. The defined sensitivity formula has the benefit of showing parameters for fiber-optic bending sensor systems.     

Fiber-optic acoustic sensor for nondestructive evaluation

An experimental study was conducted to investigate the applicability of fiber-optic acoustic sensors to detect internal flaws in polymeric materials. A polarimetric fiber-optic sensor embedded in a plexiglass model received the acoustic signals generated by an ultrasonic transducer. It is shown that proper control of the polarization and phase of the optical beam is required to obtain meaningful results from the amplitude of the fiber-optic sensor signal. The sensor has shown promising results in determining acoustical properties of plexiglass and locating internal defects. The attractive feature of this sensing scheme is that the optical fibers are not modified prior to embedding. Therefore, they preserve their mechanical properties which makes the embedding process much easier.     

Quantum key distribution over a fiber-optic channel by means of pulse position modulation

New methods are proposed for extending the range of fiber-optic one-way quantum key distribution (QKD), inspired by classical optical communication formats. A new time-domain technique based on pulse position modulation (PPM) is combined with differential phase-shift keying to optically implement a six-state protocol. Finally, some recently proposed PPM schemes are critically reviewed and applied to synthesize a new QKD asymmetric optical realization, applicable to local or metropolitan area networks.     

油罐光纤传感液位测量系统的研究

采用先进的光纤传感技术在人工浮子液位计的基础上研制了一种新型的液位测量系统。系统利用力平衡原理测量液位,利用光纤传感器探测和传输信号,采用自制的光学编码盘实现光信号的调节。测试结果表明,在0~1000mm测量范围内,测量误差≤±6mm,相对误差<2%。现场应用表明,该系统的各项性能指标符合生产要求,运行稳定,性能可靠。     

光源相干长度对光纤Fabry—Perot干涉的影响

从数值上分析了光源相干长度对光纤Fabry-Perot干涉的影响。推导了光源在理想情况和非理想情况下的光纤Fabry—Perot干涉模型,通过计算机模拟了干涉信号,指出在非单色光源下,干涉条纹失去周期性,随着腔长相干长度比增加干涉条纹的变化幅度减小,最后演化成一条直线,条纹的可见度也慢慢趋近于零。综合考虑了光纤的耦合效率和光源的非单色性对干涉信号的影响,随着腔长的增加,干涉信号的幅值和变化幅度都在减小,信噪比变差。要得到好的干涉信号,腔长不宜选择过大,必须使光源的腔长相干长度比值低于0．1。     

Mathematical modeling of random coupling between polarization modes in single-mode optical fibers: XII. Dependence of the zero drift in fiber ring interferometers in orthogonal polarization modes on the range of temperature variation in an optical fiber

Temperature dependences of the zero drift in a fiber ring interferometer (FRI) without a polarizer in the presence of random inhomogeneities in a single-mode optical fiber in the FRI loop are obtained by numerical simulation. The results are compared with known experimental data. It is shown that FRIs using a superluminescent diode as a source of nonmonochromatic radiation and a loop made of a single-mode optical fiber with weak linear birefringence can find application as low-accuracy fiber-optic gyroscopes and FRIs with a loop made of a single-mode optical fiber with strong linear birefringence can be used as medium-accuracy fiber-optic gyroscopes.