Aggregation behavior of poly(N-isopropylacrylamide) microspheres

Electrophoretic mobility and aggregation in suspensions of three types of microspheres (Ms 1, Ms 2 and Ms 3) are studied at different pH, ionic strengths and temperatures of the medium. Here Ms 1 is a core particle composed of poly(N-isopropylacrylamide-co-styrene). Ms 2 is a core-shell microsphere consisting of Ms 1 as the particle core covered with a surface layer of poly(N-isopropylacrylamide) hydrogel. Ms 3 is also a core-shell microsphere composed of MS-1 covered with a surface layer of poly(N-isopropylacrylamide-co-acrylic acid) hydrogel. The charge density zN and the softness parameter 1/λ of the microspheres were obtained from the electrophoretic mobility data on the basis of an electrokinetic theory of soft particles. It is shown that when zN is large, suspensions of microspheres are always stable, showing no aggregation. When zN is small, the suspensions are stable for large 1/λ but show strong aggregation for small 1/λ.     

Preparations and properties of amino acid/dodecylamine/ibuprofen/H2O vesicles and microspheres

Stable vesicles and microspheres are directly prepared in amino acid/dodecylamine (DA)/ibuprofen/H₂O system. Vesicle can be automatically formed in glycine/DA/H₂O system. No vesicle and microsphere are found in l-glutamic acid or l-histidine/DA/H₂O systems. When ibuprofen is added into amino acid/DA/H₂O system, vesicles and microspheres can be formed and coexisted. Ibuprofen can regulate the quantity ratios between the vesicles and the microspheres. The structure properties of amino acid affect on the stabilities of the vesicles and microspheres. The formation mechanisms of the vesicles and microspheres are also discussed in this paper.     

Recyclable helical poly(phenylacetylene)‐supported catalyst for asymmetric aldol reaction in aqueous media

A novel one‐handed helical poly(phenylacetylene) bearing L‐hydroxyproline pendants (poly(PA‐P)) was synthesized as an eco‐friendly polymer‐supported catalyst for asymmetric reactions. The helical poly(PA‐P) catalyzed the asymmetric aldol reactions of cyclohexanone with p‐nitrobenzaldehyde, and showed good recyclability and higher enantiomeric excess (ee) in aqueous medias than that in organic medias. The one‐handed helicity of poly(PA‐P) was clearly affected by the water content in the aqueous media. The helical poly(PA‐P) showed the higher enantioselectivity (ee = 99%) than its monomer PA‐P (ee = 54%) in THF/H₂O (H₂O vol % = 25.0 vol %). After the one‐handed helical structure of poly(PA‐P) was destroyed by grinding treatment, the ee of the reaction clearly decreased from 99 to 49%. These indicate that the one‐handed helical structure of poly(PA‐P) played an important role in the high enantioselectivity of the asymmetric aldol reactions in the aqueous media. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1024–1031     

Solution dynamics of 5-fluorouracil entrapped in poly lactic-co-glycolic acid (PLGA) microsphere—A study with 1D selective NMR methods

In this report, our main focus is to introduce a set of one-dimensional (1D) NMR methods based on chemical shift, relaxation, and magnetization transfer, namely, NOE and chemical exchange involving selective pulse excitation to study the solution dynamics of drug in free and encapsulated state within polymeric microsphere. In this regard 5-fluorouracil (5-FU) loaded poly lactic-co-glycolic acid (PLGA) microspheres are prepared as model system via standard water-in-oil-in-water emulsification method. One-dimensional ¹H and ¹⁹F nuclear magnetic resonance (NMR) spectra of 5-FU in presence of PLGA microspheres presented a significant change in linewidth and relaxation rates compared with free 5-FU confirming encapsulation. Furthermore, loss of coupling pattern in ¹H and ¹⁹F NMR of PLGA encapsulated 5-FU as compared with free 5-FU suggests an enhanced –NH and –H₂O protons exchange dynamics in the interior of the microsphere indicating hydrated microsphere cavity. Quantification of exchange dynamics in case of free and PLGA-encapsulated 5-FU was attempted employing 1D selective NOESY and 1D multiply selective inversion recovery experiments. Analysis of the exchange rates confirmed existence of more than one kind of water population within the cavity as mentioned in an earlier solid state NMR report.     

Interaction of polyoxometalate Mo132 with poly(vinyl alcohol)

Some aspects of the interaction of (NH₄)₄₂[Mo ₇₂ ^VI Mo ₆₀ ^V O₃₇₂(H₃CCOO)₃₀(H₂O)₇₂] · 30H₃CCOONH₄ · 250H₂O (polyoxometalate Mo132) with a water-soluble nonionic polymer (poly(vinyl alcohol) or related poly(vinylpyrrolidone)) were studied in aqueous solutions and in films. A set of methods was used: spectrophotometry, EPR spectroscopy, visual microscopy, X-ray powder diffraction, scanning probe microscopy, and potentiometry. The complex-formation features of the system were revealed. The miscibility of the components and their influence on crystallization phenomena were considered. The effect of UV and X-rays on poly(vinyl alcohol) + polyoxometalate films was studied. Poly(vinyl alcohol) stabilizes the polymer. Mutual radiation and thermal stabilization of the polymer and polyoxometalate was discovered. The utility of ion-sensitive electrodes for Mo132 determination in solution was demonstrated.     

Preparation, characterization, and pharmacodynamics of exenatide-loaded poly(DL-lactic-co-glycolic acid) microspheres

Exenatide (synthetic exendin-4), a 39-amino acid peptide, was encapsulated in poly(DL-lactic-co-glycolic acid) (PLGA) microspheres as a sustained release delivery system for the therapy of type 2 diabetes mellitus. The microspheres were prepared by a double-emulsion solvent evaporation method and the particle size, surface morphology, drug encapsulation efficiency, in vitro release profiles and in vivo hypoglycemic activity were evaluated. The results indicated that the morphology of the exenatide PLGA microspheres presented as a spherical shape with smooth surface, and the particle sizes distributed from 5.8 to 13.6 μm. The drug encapsulation efficiency tested by micro-bicinchoninic acid (BCA) assay was influenced by certain parameters such as inner and outer aqueous phase volume, PLGA concentration in oil phase, polyvinyl alcohol (PVA) concentrations in outer aqueous phase. Moreover, in vitro release behaviors were also affected by some parameters such as polymer type, PLGA molecular, internal aqueous phase volume, PLGA concentration. The pharmacodynamics in streptozotocin (STZ)-induced diabetic mice suggested that, exenatide microspheres have a significant hypoglycemic activity within one month, and its controlling of plasma glucose was similar to that of exenatide solution injected twice daily with identical exenatide amount. In conclusion, this microsphere could be a well sustained delivery system for exenatide to treat type 2 diabetes mellitus.     

Investigation of the degradation behaviour of poly(ethylene glycol-co-d,l-lactide) copolymer

The aim was to investigate the degradation behaviour of poly(ethylene glycol-co-d,l-lactide) (PEG-d,l-PLA) multiblock copolymer, in bulk and as microspheres, in aqueous medium. The degradation behaviour of PLA homopolymers in bulk and microspheres was evaluated as comparison.Microsphere preparation was performed by the double emulsion solvent evaporation method. Physical-chemical characterization of the raw polymers and the microspheres was performed by nuclear magnetic resonance (NMR) and modulated differential scanning calorimetry (MDSC). Polymer molecular weight, before and after incubation in aqueous environment, was evaluated by GPC; water uptake and mass loss were determined gravimetrically.The presence of PEG segments inside PLA chains gave a characteristic spongy structure to the microspheres. A significant increase in polymer T_g values was found for the microsphere formulations compared to polymer in bulk. After 63 days of incubation in the aqueous environment, the PEG-d,l-PLA microspheres achieved an average M_w reduction of 47% compared to 20% for PLA microspheres. The corresponding M_w decrease of the polymers in bulk was significantly higher: 72% and 41% for PEG-d,l-PLA and PLA, respectively.The data show how the degradation behaviour of polymer in bulk in an aqueous environment is significantly different from the behaviour of the corresponding microspheres. These results highlight the importance of performing a thorough physical-chemical characterization on microsphere formulations.     

Assemblies of poly(styrene/⇌-tert-butoxy-ω-vinyl-benzyl-poryglycidol) Microspheres with different diameters deposited on mica plates

Formation of poly(styrene/α-tert-butoxy-ω-vinyl-benzyl-polyglycidol) microsphere assemblies on mica plates modified with 3-aminopropyltriethoxysilane was investigated. Microsphere assemblies contained two types of particles similar with respect of their chemical structure but with different diameters (D _n = 1000 and 350 nm). Methods of particle deposition included: deposition from water suspension of a mixture of small and large particles on mica plates placed at the bottom of suspension container, deposition of particles from a drop of ethanol suspension (containing large and small microspheres) placed on the mica substrate, deposition of microspheres on modified mica plates crossing the liquid-air interface-sequential deposition of large and small particles, and one-batch deposition from a mixed water suspension of large and small microspheres. Deposition from water suspension containing large and small microspheres on plates placed on the bottom of suspension container yielded assemblies with large particles randomly distributed among the small ones. Fraction of large particles in adsorbed particle assembly was smaller than fraction of large particles in suspension. Particle assemblies prepared by placement of ethanol suspension of large and small microspheres on mica were composed of quite regularly distributed large particles among the small ones. A two step process consisting of withdrawal of mica plate from water suspension of large particles and then on using this plate as substrate in a second step during which the plate was withdrawn from suspension of small particles yielded particle assemblies containing aggregates of large particles randomly distributed among the small ones. Withdrawal of mica plates from water suspension of large and small microspheres resulted in particle assemblies composed of regularly distributed stripes of large and small microspheres. Formation of the described above microsphere assemblies is possible only in case of reversible adsorption of particles.     

Preparation of monodisperse functional poly(styrene-co-acrylamidoxime) microsphere with chelating amidoxime group

Monodisperse poly(styrene-co-acrylonitrile) microspheres were prepared by dispersion copolymerization of styrene (St) and acrylonitrile (AN) in ethanol (EtOH)/isopropanol medium. 2,2′-Azobis(isobutyronitrile) (AIBN) and poly(acrylic acid) (PAA) were utilized as initiator and steric stabilizer, respectively. The effects of PAA stabilizer, AIBN initiator, St/AN monomer ratio, and EtOH solvent on particle size and size distribution were investigated systematically. AN is a co-monomer with desired nitrile group (–CN); the functional P(St-co-acrylamidoxime) microsphere with chelating amidoxime group (–C(NH₂)=NOH) was derived by amidoximizing the nitrile group with hydroxylamine. The percentage of chemical modification was calculated to be 51.2% in this study.     

Effect of freeze-drying and rehydrating treatment on the thermo-responsive characteristics of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) microspheres

Investigations on the effect of freeze-drying and rehydrating treatment on equilibrium volume changes and on the thermo-response rate of poly(N-isopropylacrylamide) (PNIPAM) microspheres were carried out. The experimental results showed that freeze-drying and rehydrating treatment had nearly no effect on the low critical solution temperature and equilibrium volume changes of PNIPAM microspheres. Furthermore, when the PNIPAM microspheres were frozen in only liquid nitrogen through rapid cooling, the response rate of PNIPAM microspheres to environmental temperature change was nearly not affected by the treatment, which was surprisingly different from the macroscopic hydrogel. The dimension effect was responsible for this phenomenon. The micron-sized PNIPAM microsphere itself has a much quicker response rate compared with the bulky hydrogel because the characteristic time of gel deswelling is proportional to the square of a linear dimension of the hydrogel.     

Synthesis and characterization of thermo-sensitive poly (N-isopropylacrylamide) hydrogel with fast response rate

Thermo-sensitive poly (N-isopropylacrylamide) (PNIPA) hydrogel with fast response rate was prepared by polymerizing N-isopropylacrylamide (NIPA) in an aqueous hydroxyl-propyl-methyl cellulose solution. The volume phase transition temperature of PNIPA hydrogels was characterized by differential scanning calorimetry (DSC), and the surface morphology was observed by scanning electron microscopy (SEM). The swelling ratios of the hydrogels at different temperatures were measured. Furthermore, the deswelling kinetics of the hydrogels was also studied by measuring their water retention capacity. In comparison with a conventional PNIPA hydrogel prepared in water, the hydrogel synthesized in aqueous hydroxyl-propyl-methyl cellulose solution has higher swelling ratios at temperatures below the lower critical solution temperature and exhibits a much faster response rate to temperature changes. For example, the hydrogel made in aqueous hydroxyl-propyl-methyl cellulose solution lost 89% water within 1 min and about 93% water in 4 min, whereas the conventional hydrogel lost only about 66% water in 15 min from the deswelling measurement in similar conditions. Translated from Chinese Journal of Applied Chemistry, 2006, 23(6): 581–585 (in Chinese)     

Hydrophobic interaction in poly(2-hydroxyethyl methacrylate) homogeneous hydrogel

Homogeneous poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogel exhibits a narrow range of swelling at equilibrium in water (% H₂O, 41.09 ± 0.15 standard error of the mean of 24 samples), regardless of the dilution of the monomer solution and relatively low level of crosslinking. It is postulated that PHEMA hydrogel has, in addition to its covalently linked network structure, a secondary structure stabilized by hydrophobic bonding. The addition of microsolutes to the hydrogel seems to confirm this hypothesis. The hydrogel swells beyond its swelling equilibrium in water in presence of urea and its methyl derivatives. Swelling is also induced by organic solvents like alcohol and acetone, and by anions like iodide, acetate, trichloroacetate, and thiocyanate. Chlorides and sulfates produce a less swollen hydrogel than pure water, while bromides and cetylpyridinium chloride, in the concentrations tested, induce only a slight deswelling of the gel. When PHEMA gel prepared in organic solvent–water solutions is placed in water, the gel passes through an opaque state before becoming transparent again. This phenomenon is interpreted as being caused by the inability of water to solvate the hydrophilic ends of the unorganized polymer segments. Homogeneity returns to the gel after a rearrangement of the chains, directed by the interaction of the hydrophobic portions of the polymer segments, exposing to the solvent–water most of the hydrophilic sites in the network.     

CPS K 221 Model of proton longitudinal magnetic relaxation in hydrated crosslinked poly(methacrylic acid)

Proton longitudinal magnetic relaxation time (T₁) measurements have been made at 30 MHz over a wide range of temperature for crosslinked poly(methacrylic acid), PMA, hydrated with H₂O as well as with D₂O. From the point of view of nuclear magnetic relaxation, PMA hydrogel is a multiregion system in which three proton regions (a, b, c) can be distinguished. Region a is regarded as to be formed by the nonexchangeable polymer protons, region b by the protons of -COOH · H₂O combinations, and region c by the protons of remaining water molecules. Cross relaxation between polymer and water protons and a log normal distribution of correlation times have been assumed to take place. Temperature dependences of the T₁ time for the particular regions have been determined, from which the distribution width parameter, the second moment and the intramolecular proton-proton distance for sorbed water have been calculated.     

Dynamics studies on thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) hydrogel in tetrahydrofuran/water mixtures

The properties of thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogel in tetrahydrofuran/H₂O mixtures were studied. Scanning electron microscopic (SEM) images demonstrate that the hydrogel changes from homogeneous to heterogeneous microstructure upon the addition of tetrahydrofuran to water. This heterogeneous PNIPAAm hydrogel in the mixture solvent exhibits a very slow response rate at temperatures above its lower critical solution temperature. The decreased response rate is attributed to the formation of special ternary complexes including the polymer and the two solvents in the tetrahydrofuran/H₂O mixture. Factors controlling the thermoresponse rate are discussed further and several suggestions are provided for designing and developing fast-response PNIPAAm hydrogels in the future.     

Nanofibrosis of uncrystallizable poly(lactide‐co‐glycolide) via phase separation

Poly(lactide‐co‐glycolide) (PLGA) copolymers are a kind of biocompatible and biodegradable materials being widely used in tissue engineering. However, phase separation had not been reported successfully in fabricating these amorphous polymers into nanofibrous matrix, although this technique had shown advantages over electrospinning in producing a nanofiber network. In this study, tetrahydrofuran (THF)/H₂O solvent pairs were found suitable solvents to induce the formation of uniform PLGA gel at selected gelation temperatures. The results indicated that fine nanofibrous structures with fiber diameter around 40–60 nm could be obtained following the steps of gel formation, solvent extraction, and freeze‐drying, by controlling the concentration of PLGA/THF/H₂O solution, THF/H₂O ratio, and gelation temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

Molecular mobility in micellar complexes of a nonionic surfactant and the poly(acrylic acid)-based hydrogel

The interaction between the polyelectrolyte gel of crosslinked poly(acrylic acid) (PAA) and nonionic surfactant Brij 58 based on poly(ethylene glycol) (C₁₆H₃₃(CH₂CH₂O)₂₀OH) is studied. It is established that poly(acrylic acid)-surfactant complexes are formed. Nondissociated carboxyl groups of poly(acrylic acid) and oxygen atoms of the surfactant are involved in the complexation. Surfactant micelles are a kind of bridge that connects polymer chains. The presence of the surfactant decreases the equilibrium swelling of the hydrogel. The spin probe method is employed to determine the local mobility of the hydrocarbon core of a micelle in the complex. It was shown that the local mobility is independent of the hydrogel crosslink density and is much lower in acidic than in alkaline media. In acidic media, much more surfactant molecules of micelles are involved in the complexation than in alkaline media. However, even in alkaline media, surfactant micelles cannot leave the hydrogel, while the spin probes located in micelles are at equilibrium with the spin probes present in the external aqueous medium. The prospects for applying the considered systems as carriers for controlled release drugs are discussed.     

Synthesis,characterization and water absorbency properties of poly(acrylic acid)/sodium humate superabsorbent composite

A novel poly(acrylic acid)/sodium humate superabsorbent composite was synthesized by aqueous solution polymerization of acrylic acid using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator in the presence of sodium humate. The effects on water absorbency such as initial monomer concentration, degree of neutralization of acrylic acid, amount of crosslinker, initiator and sodium humate, etc. were investigated. The water absorbency of the superabsorbent composite synthesized under optimal synthesis conditions with a sodium humate content of 20% exhibited an absorption of 1268 g H₂O/g sample and 93 g H₂O/g sample in distilled water and in 0.9 wt% NaCl solution, respectively. Swelling rate and water retention tests were also carried out. The results show that sodium humate, as a kind of functional filler, can enhance comprehensive properties of superabsorbent composite and reduce the product cost significantly. Copyright © 2005 John Wiley & Sons, Ltd.     

Dynamic mechanical properties of poly(2-hydroxyethyl methacrylate) hydrogels

Homogeneous and heterogeneous poly(2-hydroxyethyl methacrylate) hydrogels were prepared by copolymerization of 2-hydroxyethyl methacrylate and small amounts of ethylene glycol dimethacrylate in the presence of water; concentrations of water (V₁) in the polymerization mixture and the volume fractions of water (v₁) of the gels swollen to equilibrium were 40, 50, 60, 70% by volume, and 0.475, 0.541, 0.669, 0.778, respectively. From the homogeneous (clear) hydrogel (V₁ = 40%) preparation, four hydrogels were prepared with v₁ = 0.434, 0.418, 0.378, 0.326. Tensile dynamic moduli were measured in the frequency range from 0.006 to 0.6 cps and the temperature range from 0 to 40°C. In these cases, the influence of swelling on the shape of the relaxation spectra and on the monomeric unit friction coefficient was studied. The dependence of the friction coefficient on water concentration was interpreted in terms of free volume. In the heterogeneous (opaque) gel preparations (V₁ = 50, 60, 70%), the effect of the aqueous phase in the system on the mechanical behavior was described by a modification of the blending law of Ninomiya. For the systems with V₁ = 60% and 70% the shapes of the storage and loss moduli in the main transition region and the friction coefficient were similar to those of the homogeneous gel with V₁ = 40%, except for the decrease in absolute value of the storage moduli. For the system with V₁ = 50% the shape of the relaxation spectrum changes appreciably and the wedge distribution does not hold.     

Synthesis of vinyl ether-capped telechelic poly(tetrahydrofuran)

Vinyl ether-terminated telechelic poly(tetrahydrofuran) (poly(THF)) was synthesized by the reaction of a bifunctional living cationic polymer of THF with an excess of Na⊕⊖OCH₂CH₂ O CHCH₂ in THF at 0°C. The obtained polymer has narrow molecular weight distribution and end functionality close to two.     

Study on the preparation and the self‐assembly of poly(propyleneimine)–poly(styrene) nanoparticles

Using 2‐chloropropionamide derivative of poly(propyleneimine) dendrimer DAB‐dendr‐(NH₂)₃₂ (DAB‐32‐Cl) as the macroinitiator, atom transfer radical polymerization of styrene was successfully carried out in DMF medium. The monodisperse poly(propyleneimine)–polystyrene (dendrimer–PSt) particles with diameters smaller than 100 nm could be prepared. The morphology, size, and size distribution of the dendrimer–PSt particles were characterized by transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS). The effects of reaction temperature, the ratio of St/macroinitiator, and reaction time on the size, and size distribution of the dendrimer–PSt nanoparticles were investigated. In a selective solvent (DMF/H₂O), polymers can self‐assemble into different aggregate configurations such as regular microsphere and wire‐like thread. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2658–2666, 2008