Schnell rotierender Lichtbogen als spektroskopische Lichtquelle

An electric arc quickly moved magnetically forms a closed plasma cone or plasma ring between two concentrically arranged electrodes. Aerosols and suspended matters can be brought into the plasma in an optimum manner with a little carrier gas flow, and can be excited to emission. The dates applied and attained till now are: Arc current 5…?20 A, magnetic field strength 10⁴…?4 · 10⁵ A/m, magnetic induction 0.1…?0.3 T, rotation frequency 8…?15 kc, carrier gas air or argon maximum flow 0.5 1/min, intensity increase for CuI-lines up to factor 100. Further applications are possible for special lamps and electric arc diagnostics.     

The Current Distribution and the Magnetic Pressure Profile in a Vacuum Arc Subject to an Axial Magnetic Field

The steady-state electric-current distribution and the magnetic pressure in a uniform conducting medium, flowing in a cylindrical configuration between two circular electrodes, was determined by solving the magnetic field transport equation with a superimposed axial magnetic field. This medium models the interelectrode plasma of the diffuse mode metal vapor vacuum arc. The results show the following. a) The electric current and the flux of the poloidal magnetic field are constricted at the anode side of the flowing plasma. Most of the constriction takes place within a boundary layer, with a characteristic length of 1/Rme, where Rme is the magnetic-Reynolds number for axial electron flow. b) The electric-current constriction inversely depends on K?, where K? is the azimuthal surface current density which produces the axial magnetic field. c) The magnetic-pressure profile shows a radial pinch force in most of the interelectrode region, but in the anode boundary layer it is axially directed, thus retarding the plasma flow. d) The peak of the magnetic pressure is at the anode, and its amplitude directly depends on K?. As K? increases, the peak location moves toward the anode center.     

A steadily rotating plasma disk

A homogeneously rotating plasma disk can be formed in a radially directed Ar-arc discharge at reduced pressure with an externally applied axial magnetic field. The radial pressure distribution is measured, as well as the emitted continuum radiation and the arc voltage. With these experimental values profiles of temperature, radial and azimuthal current density, and flow velocity in the disk are evaluated. Viscosity determines the flow pattern essentially. The effects of magnetic field and rotational motion on the discharge are investigated. The disk exhibits at nonrigid rotation a strong centrifugal force and a minor Coriolis force. A weak double vortex is found to develop in the meridional plane. The electric field in the discharge is altered by the azimuthal plasma flow.     

Interaction between Vacuum Arcs and Transverse Magnetic Fields with Application to Current Limitation

The interaction between diffuse vacuum arcs and magnetic fields applied transverse to the electrode axis has been investigated both theoretically and experimentally. For arc currents < 6 kA, Hall electric fields, generated by the interaction, bow the plasma out of contact with the anode and raise the arc voltage. In the presence of a parallel capacitor, the arc current falls to zero and the arc is extinguished. For arc currents of 6 to 15 kA, arc extinction can be achieved with an oscillatory magnetic field; during such extinctions the arc voltage remains in phase with the magnitude of the field. Arc extinction via magnetic field/vacuum arc interaction could have applications to ac-current limiters and dc breakers. The fault current limiter application is discussed in this paper.     

Stable Configuration of Electric Arcs in Transverse Magnetic Fields

Deviations from rotational symmetry of arc columns exposed to transverse magnetic fields cause convection and a momentum transport between the column and its surrounding gas. As a consequence, the arc moves and changes its geometry until it reaches a stable configuration. Based on the momentum transport equation, the arc behavior is discussed under various operating conditions, and stable arc configurations are determined. In particular, the stability-criteria of a balanced arc column in a transverse gas flow and magnetic field is derived. It turns out that the arc becomes unstable with respect to kinks parallel to the applied magnetic field when ? = p?/(B2/8?)?1. (p? = ambient pressure, Bo = applied magnetic field).     

The DC Arc in a Supersonic Nozzle Flow

The boundary layer integral method at its second level of approximation has been used to study the DC arc in a supersonic nozzle flow. It is shown that with the inclusion of the arc momentum balance, the critical point of the flow is, generally, not the sonic point of the external flow. The speed, at which a disturbance propagates relative to the external flow, is in general supersonic and is dependent on the arc conditions. The arc model is capable of predicting the axial electric field, the arc size and the axial pressure distribution as a function of current. For affinely related nozzles, the solution is determined by a parameter N, which is related to zt, the stagnation condition and the nominal current density at the throat (I/At). Numerical results are given for a particular nozzle shape although the method of analysis is general. Practical implications as regards nozzle design for a gas blast circuit breaker are briefly discussed.     

Coaxial Discharge and Transverse Magnetic Field

The study deals with the effect of an applied transverse magnetic field on the dynamics and parameters of the focused and expanded plasma in a coaxial discharge. The experimental results were found with a 3 kJ Plasma focus device of a Mather geometry. The discharge takes place in hydrogen gas with base pressure of 0.5 Torr. The experiments are conducted with a 10 kV bank voltage, which corresponds to 100 kA peak discharge current with rise time 8 μs. Helmholtz magnetic coils are placed outside the expansions chamber to produce a transverse magnetic field with intensity 280 G perpendicular to the plasma expanded from the coaxial electrodes. The investigations have shown that the plasma flow along the expansion chamber axis is restricted when applying the externally transverse magnetic field and the maximum axial velocity of the expanded plasma is decreased by 33%. X-ray probe has been used to measure the focused plasma electron temperature (T_e). The experimental results and the calculations showed that T_e is decreased from 2.2 keV to 800 eV with the application of a transverse magnetic field. The expanded plasma electron temperature and density have been measured by an electric double probe, the results cleared that the expanded plasma electron temperature is decreased by 2.6 times while its density is increased by 9 times, when a transverse magnetic field is applied.     

Influence of ambient pressure on the performance of an arc discharge plasma actuator

The arc discharge plasma actuator (ADPA) has wide application prospects in high‐speed flow control because of its local heating effect and strong disturbance. In this paper, the influence of ambient pressure, which ranges from 3 to 20 kPa, on the performance of a two‐electrode ADPA is investigated by a schlieren system. The duration of the arc heated region, as well as its area, is extracted by image processing. As the ambient pressure increases, different flow field evolutions occur. The duration of the ADPA heated region increases with the ambient pressure. The maximum duration reaches 1185.3 µs at 20 kPa. The velocity of the discharge‐induced blast shock wave first decreases gradually and then remains at 345 m/s for all air pressures. The blast shock wave has a higher velocity at lower pressures when it is freshly produced. A maximum blast shock wave velocity of 582 m/s is observed at the pressure of 7 kPa. The arc heated region is not sensitive to ambient pressure, but the deposited energy from the arc increases when the pressure increases.     

Orbital motion of dust particles in an rf magnetron discharge. Ion drag force or neutral atom wind force

Microparticles with sizes up to 130 μm have been confined and the velocity and diameter of particles in a plasma trap of an rf magnetron discharge with an arc magnetic field have been simultaneously measured. The motion of the gas induced by electron and ion cyclotron currents has been numerically simulated using the Navier-Stokes equation. The experimental and numerical results confirm the mechanism of the orbital motion of dust particles in the magnetron discharge plasma that is associated with the orbital motion of the neutral gas accelerated by electron and ion drift flows in crossed electric and magnetic fields.     

Vacuum arc cathode spot grouping and motion in magnetic fields

Two of the important vacuum arc phenomena observed when the arc runs in a transverse magnetic field are cathode spot grouping and the cathode spot retrograde motion, i.e., in the anti-Amperian direction. This paper summarizes the main experimental observations and proposes a physical model for spot grouping and spot retrograde motion. The proposed spot motion model take in account the previous theoretical model of the cathode thermal regime and the plasma flow near the cathode surface that is based on two conditions: i) the heat loss in the cathode bulk is relatively small to the heat influx, and ii) the plasma flow in the Knudsen layer is impeded. In the present model, the current per group spot is calculated by assuming that the plasma kinetic pressure is comparable to the self-magnetic pressure in the acceleration region of cathode plasma jet. The model includes equations for the current per spot group, spot velocity dependence on the magnetic field and on the arc current in vacuum, as well as in gas filled arc gap. The calculated currents per spot group and spot velocity increase linearly with the magnetic field and arc current, and this dependencies well agree with previous observations. The cathode spot retrograde motion in short electrode gaps and at atmospheric pressure arcs, and the reversal motion in strong magnetic fields (>1 T) observed by Robson and Engel are discussed. The details of the retrograde motion observed in the last decades including the spot velocity dependence on the electrode gap, roughness, temperature, and material could be understood in the frame of the proposed model.     

Cathodic-arc plasma density, radial profile, and total plasmainventory as measured by microwave interferometer and Faraday cup

The total amount of plasma, peak plasma density, and plasma density radial profile are derived from a series of measurements of ion current density (with a Faraday cup) and integrated electron line density (with a microwave interferometer) for a cathodic arc derived plasma. Comparisons are made between cathode material (erbium and titanium), arc current, background gas pressure, and the presence or absence of a series magnetic solenoid around the coaxial anode and cathode     

直流纯氩层流等离子体射流的长度变化

采用主要由阴极、阳极以及介于阴极和阳极之间的中间段组成的直流非转移式电弧等离子体发生器,在大气压条件下,比较系统地研究了纯氩层流等离子体射流的长度随着弧电流、气体流量以及发生器结构而变化的规律。结果表明:层流射流的长度随弧电流和工作气流量的增加而增长;层流向湍流流动转变的临界气流量值随弧电流增大而提高;在发生器的伏安特性呈大梯度变化的情况下,射流长度随弧电流的变化幅度增大。     

Investigations of the spatio-temporal build-up of atomic oxygen inside the micro-scaled atmospheric pressure plasma jet

The ascent of atomic oxygen densities created inside the micro-scaled atmospheric pressure plasma jet has been investigated spatially resolved under parameter variations such as applied power, gas mixture and gas velocity using two-photon absorption laser induced fluorescence spectroscopy. Along the discharge channel an increase of the atomic oxygen density within the plasma is observed. The density shows an exponentially asymptotic convergence into an equilibrium close to the effluent. In the post-discharge effluent an exponential spatial decrease can be found. Typical ascent distances of a few hundreds of μm decrease with the applied power and increase with gas velocity and oxygen admixture. The maximum atomic oxygen density increases with applied power and admixed molecular oxygen up to more than 10¹⁶ cm^-3. An increase of the maximum atomic oxygen density with increasing gas velocity has been found. Optical emission spectroscopy measurements indicate a strong increase of the nitrogen emission at low gas flow rates along the channel.     

Observation of arc modes in a magnetically rotating arc plasma generator

An arc plasma can present various forms under the influence of an external magnetic field. In this study, a magnetically rotating arc plasma generator has been developed to produce three arc modes, namely rigid arc, distorted arc, and diffuse arc, which are obtained by controlling the gas flow rate. The evolution of these arc modes are experimentally studied and discussed. Results show that, as the gas flow rate increases, the arc mode is first transformed from the rigid to the distorted mode, and then to the diffuse mode. Comparisons show that the location of the arc attachment is a key factor in determining the rigid and distorted modes. The diffuse arc is observed under larger gas flow rates, but the completely diffuse arc can exist only within a narrow range of gas flow rates. Compared to the distorted arc, the diffuse arc has not only better stability but also a wider high‐temperature plasma zone, which indicates that the diffuse mode may be more useful in industry.     

Plasma generation for the plasma cutting process

This study is an attempt to estimate the overall properties, viz. the thermal power and force, of an intense plasma jet produced by a plasma cutting torch, and to relate the properties of the plasma to the diameter of the nozzle of the plasma torch and the flow rate of plasma-forming gas. For cutting metallic plates using a thermal plasma, a narrow plasma jet is produced by means of a transferred electric are between an electrode in a plasma torch and the material to be cut. The power density and pressure exerted by the plasma jet on the material at the region of cut needs to be high so that a straight cut, without dress at the bottom of the plate, can be obtained. A simple theory to describe the behavior of the arc in a plasma cutting torch has been developed to predict the are radius, pressure, and arc voltage at the nozzle exit as a function of are current for a range of nozzle sizes and air flow rates. The results obtained are in good agreement with the measured values for an air plasma cutting torch nominally rated for 100-A operation. The relationships between the mass flow rate of plasma gas, plasma power, and arc force have been discussed in the light of design of plasma torches for plasma cutting     

Pressure dependence of plasma parameters in medium-vacuum nitrogenarc discharge with the titanium cathode

The plasma properties of a medium-vacuum nitrogen arc discharge from a titanium cathode were studied. The arc chamber use was 400 mm in diameter and 600 mm in length. The cathode diameter and thickness were 64 and 25 mm, respectively. The experimental conditions are given as follows: pressure range=1×10^-3~2×10^-1 torr; N₂ gas flow rate=6 ml/min; arc current=50 A. Electric probe characteristics are measured as a function of pressure and distance from the cathode surface. The analytical results obtained show that the electron energy distribution takes 1-Mx at pressures above 1×10^-2 torr but 2-Mx at pressures under 4×10^-2 torr and that the electron density has a maximum value at a certain pressure. The Ti⁺, Ti⁺⁺, and N ⁺₂ ion spectral intensities are measured as a function of pressure and distance from the cathode surface. On comparison of these results and the electron density, the Ti⁺ spectral intensity turns out to be proportional to that of the electron density. This suggests that the major ion in the plasma volume is of the Ti⁺ species     

Dynamic behaviour of alternating current arc discharge in a multi‐arc generator at atmospheric pressure

In this letter, a multi‐arc generator with three high‐voltage electrodes and a common grounded one was developed for the purpose of obtaining large area and steady arc plasma at atmospheric pressure. Three typical discharge states were found in the multi‐arc generator: independent movement of three arc columns, confluence of two arc columns, and confluence of three arc columns. The three discharge states cyclically occur on the evolution of the arc discharge and their duration is influenced by the power dissipation and plasma working gas flow rate. With an increase of discharge power and a decrease of the gas flow rate, the duration of multiple arc confluence increases, which contributes to the suppression of the fluctuation amplitude of each arc. Frequency domain analysis of the arc voltage envelope shows that the frequency of arc fluctuation increases in the multi‐arc mode in the multi‐arc generator compared to that in the single arc mode.     

Anode Heat Transfer in a DC Electric ARC with Superimposed Axial Flow

A DC electric arc is operated in argon at pressures between 100 and 760 mm Hg, axial flow velocities from 0 to 100 m/sec, and currents from 50 to 200 amps to assess the influence of these parameters on anode heat transfer using a double-anode configuration consisting of two plane, parallel anodes. Since the anode arc attachment size is appreciably smaller than the anode surface area in these experiments, a method is developed using an optical and/or floating potential probes for measuring the size of the near-anode arc column. The relative variation of two perpendicular dimensions of the near-anode arc column for variation in the arc operating parameters (pressure, flow velocity, current, anode separation) are measured. The results reveal that the cross section of the nearanode column is not circular and the average local heat fluxes show a strong dependence on the gas pressure.     

双钨极耦合电弧数值模拟

基于流体力学方程组和麦克斯韦方程组, 在合理的边界条件下, 建立了双钨极耦合电弧三维准静态数学模型. 通过对方程组的迭代求解, 获得了不同钨极间距和电弧长度下耦合电弧的温度场、流场、电弧压力和电流密度分布等重要结果, 与已有的实验研究符合良好. 模拟结果表明: 与相同条件下的钨极惰性气体保护焊电弧相比, 双钨极耦合电弧的最高温度和最大等离子流速较低, 阳极表面电弧压力和电流密度峰值明显减小; 钨极间距和弧长对耦合电弧的温度场、流场、电流密度和电弧压力等都具有显著的影响, 且耦合电弧阳极的电弧压力和电流密度分布不能用高斯近似进行描述. 关键词： 耦合电弧 三维模型 数值模拟     

Numerical analysis of plasma arc physical characteristics under additional constraint of keyhole

The physical characteristics of a plasma arc affect the stability of the keyhole and weld pool directly during keyhole plasma arc welding(KPAW). There will be significant change for these characteristics because of the interaction between the keyhole weld pool and plasma arc after penetration. Therefore, in order to obtain the temperature field, flow field, and arc pressure of a plasma arc under the reaction of the keyhole, the physical model of a plasma arc with a pre-set keyhole was established. In addition, the tungsten and base metal were established into the calculated domain, which can reflect the effect of plasma arc to weld pool further. Based on magneto hydrodynamics and Maxwell equations, a two-dimensional steady state mathematical model was established. Considering the heat production of anode and cathode, the distribution of temperature field, flow field, welding current density, and plasma arc pressure were solved out by the finite difference method. From the calculated results, it is found that the plasma arc was compressed a second time by the keyhole. This additional constraint results in an obvious rise of the plasma arc pressure and flow velocity at the minimum diameter place of the keyhole, while the temperature field is impacted slightly. Finally, the observational and metallographic experiments are conducted, and the shapes of plasma arc and fusion line agree with the simulated results generally.