Effects of different extraction methods and conditions on the phenolic composition of mate tea extracts

A simple and rapid HPLC method for determination of chlorogenic acid (5-O-caffeoylquinic acid) in mate tea extracts was developed and validated. The chromatography used isocratic elution with a mobile phase of aqueous 1.5% acetic acid-methanol (85:15, v/v). The flow rate was 0.8 mL/min and detection by UV at 325 nm. The method showed good selectivity, accuracy, repeatability and robustness, with detection limit of 0.26 mg/L and recovery of 97.76%. The developed method was applied for the determination of chlorogenic acid in mate tea extracts obtained by ethanol extraction and liquid carbon dioxide extraction with ethanol as co-solvent. Different ethanol concentrations were used (40, 50 and 60%, v/v) and liquid CO? extraction was performed at different pressures (50 and 100 bar) and constant temperature (27 ± 1 °C). Significant influence of extraction methods, conditions and solvent polarity on chlorogenic acid content, antioxidant activity and total phenolic and flavonoid content of mate tea extracts was established. The most efficient extraction solvent was liquid CO? with aqueous ethanol (40%) as co-solvent using an extraction pressure of 100 bar.     

Hydrophilic interaction chromatography separation mechanisms of tetracyclines on amino-bonded silica column

Effects of mobile-phase variations on the chromatographic separation on amino-bonded silica column in hydrophilic interaction chromatography (HILIC) were investigated for four zwitterionic tetracyclines (TCs): oxytetracycline, doxycycline, chlortetracycline, and tetracycline. A mixed-mode retention mechanism composed of partitioning, adsorption, and ion exchange interactions was proposed for the amino HILIC retention process. Buffer type and pH significantly influenced the retention of TCs, but showed similar separation selectivity for the tested analytes. Experiments varying buffer salt concentration and pH demonstrated the presence of ion exchange interactions in TCs retention. The type and concentration of organic modifier also affected the retention and selectivity of the analytes, providing direct evidence supporting the Alpert retention model for HILIC. The retention time of the analytes increased in the following order of organic modifiers: tetrahydrofuran < methanol < isopropanol < acetonitrile. The linear relationships of logk' versus %water (v/v) curve and logk' versus logarithm of %water (v/v) in the mobile phase indicated that TCs separation on the amino phase was controlled by partitioning and adsorption. The developed method was successfully utilized in the detection of TCs in both river water and wastewater samples using solid-phase extraction (SPE) for sample cleanup.     

Gas chromatographic/mass spectrometric determination of flumioxazin extracted from soil and water

A method was developed for determining flumioxazin in soil and water. Recovery efficiencies for solid-phase extraction (SPE) of flumioxazin from deionized, well, and surface water were between 72 and 77%. SPE was superior to liquid-liquid extraction, using water-hexane and water-chloroform emulsions, which resulted in retrieval efficiencies of 25 and 22%, respectively. However, liquid-liquid extraction with ethyl acetate improved recovery of total flumioxazin to >64%. Extraction from soil samples by direct solvent/soil extraction methods recovered between 18 and 76% of applied flumioxazin, depending on the solvent combination used. However, the use of accelerated solvent extraction techniques resulted in a 106 +/- 8% recovery of flumioxazin from soil. In analysis by capillary gas chromatography with mass selective detection, flumioxazin had a calculated limit of detection of 9 ng/mL with a retention time of 16.66 min.     

Solid-phase extraction of soy isoflavones

An automated method using solid-phase extraction (SPE) for the concentration and clean-up of soy isoflavone extracts is proposed in this work. Using a standardized sample (0.1 g of a freeze dried soybean extract/25 mL of water); eight SPE cartridges with a wide range of sorbents (C18, divinylbenzene and modified divinylbenzene) from different suppliers were evaluated and compared. A large variation on SPE cartridges performance was observed, especially regarding retention and breakthrough volume of isoflavones during sample load and washing steps. The most effective cartridges were the divinylbenzene based cartridges, especially Strata X (from Phenomenex) and HLB oasis (from Waters). Using Strata X cartridges, several extraction parameters, such as sample loading flow (5-15 mL min(-1)), extracting solvent volume (2-6 mL of methanol), pH of the extracting solvent and the necessity of drying the sorbent before elution, were evaluated to provide a fast, specific, quantitative and reproducible SPE method. The optimized method consists of conditioning the cartridge with 10 mL of methanol and 10 mL of water (10 mL min(-1)), loading 25 mL of the standardized extract onto the cartridges (5 mL min(-1)), washing the cartridge with 10 mL of water (10 mL min(-1)) and finally eluting with 4 mL of methanol (10 mL min(-1)). Mean isoflavones recovery was 99.37% and mean intra- and inter-day reproducibility was higher than 98%. The developed sample clean-up/concentration (6.25:1) method takes less than 10 min and can be used in the analysis of isoflavones from soy extracts.     

Separation and Simultaneous Determination of Enantiomers of Tau-fluvalinate and Permethrin in Drinking Water

The chiral liquid chromatographic separation of two pyrethroid insecticides, tau-fluvalinate and permethrin, on different polysaccharide-based chiral stationary phases (CSPs) has been investigated. Complete separation of these compounds was achieved with Chiralcel OJ under normal phase mode and a mobile phase of n-hexane:ethanol (90:10, v/v). This method has been used for determining these compounds in drinking water at ppb levels after solid-phase extraction (SPE) with C-18 cartridges. Recoveries ranged between 103–113% and precision values (expressed as relative standard deviations) were lower than 10%.     

Fat contents of cereal foods: comparison of classical with recently developed extraction techniques

Eight cereal products ranging from a fat-free ready-to-eat (RTE) cereal (frosted flakes) to a full-fat high-ratio cake mix were subjected to analyte separation by anhydrous diethyl ether extraction (EE), acid hydrolysis/mixed ether extraction (AH), solid-phase extraction (SPE), and supercritical fluid extraction (SFE) with CO2 and with CO2 modified with 15% ethanol (SFEmod). Gravimetric analyses of extracts indicated higher (P < or = 0.05) crude fat values by AH than by EE, SFE, or SFEmod. Extractions followed by fatty acid methyl ester analysis also produced higher (P < or = 0.05) triglyceride means by AH than by other methods used for heat-treated RTE cereals and for ready-to-cook (RTC) cream of wheat. Therefore, for labeling purposes, AH seems most appropriate because in most cases it achieves higher triglyceride values than extraction with solvent(s) alone. SFE and SPE, on the other hand, yield fat values similar to those obtained by EE and offer the advantages of reduced solvent volume, short extraction times, and ease of laboratory automation.     

Matrix solid-phase dispersion extraction of carbadox and olaquindox in feed followed by hydrophilic interaction ultra-high-pressure liquid chromatographic analysis

A new method involving matrix solid-phase dispersion (MSPD) extraction and hydrophilic interaction ultra-high-pressure liquid chromatography (HILIC-UHPLC) with photodiode array detection was developed for the determination of carbadox and olaquindox in feed. Separation of carbadox and olaquindox was achieved within 1 min on the 1.7 microm Acquity UPLC BEH HILIC column by using isocratic elution with a mobile phase consisting of 10 mmol L(-1) ammonium acetate in acetonitrile-water (95:5, v/v) at a flow rate of 0.5 mL min(-1). Optimization of MSPD extraction parameters, such as type of solid sorbent and elution solvent were carried out. Optimal conditions selected for MSPD extraction were: 0.25 g of feed sample, 0.5 g of octadecylsilica as solid sorbent and 10 mL of acetonitrile-methanol (8:2, v/v) as eluting solvent. Both analytes provided average recoveries from spiked feed samples ranging from 89.1 to 98.4% with relative standard deviations less than 10%. Obtained performance characteristics are comparable to those achieved by liquid-liquid extraction-HPLC with the advantages of being simpler and significantly faster.     

Simultaneous determination of six alkaloids in blood and urine using a hydrophilic interaction liquid chromatography method coupled with electrospray ionization tandem mass spectrometry

A method was developed for the simultaneous determination of six toxic alkaloids (aconitine, hypaconitine, gelsemine, raceanisodamine, strychnine, brucine) in blood and urine by hydrophilic interaction liquid chromatography (HILIC) coupled with electrospray tandem mass spectrometry. Ephedrine was selected as the internal standard. Samples were extracted and cleaned up by solid-phase extraction (SPE) using Oasis MCX cartridges. Separation parameters such as organic modifier, buffer pH, and concentration of buffer salt were investigated. Gradient separation and analysis were achieved for six alkaloids on a 3-μm Atlantis HILIC column using a mobile phase consisting of 30 mM ammonium formate and acetonitrile at pH 3. Two multiple reaction monitoring (MRM) transitions for each substance were monitored to provide sufficient identification of alkaloid. The retention mechanisms were explored in the method development. Validation included assessment of linearity, limit of quantification, accuracy, and precision. Bias was less than 15.1% and precision was better than 8.3% for both blood and urine samples. A total of 54 clinical samples were examined by this validated method.     

应用亲水作用色谱检测鸡蛋和肉中三聚氰胺及三聚氰酸二酰胺

应用亲水作用色谱(HILIC)对从市场上购买的鸡蛋和肉中的三聚氰胺及三聚氰胺降解产物三聚氰酸二酰胺进行了检测。采用的色谱柱为ZIC-HILIC柱,流动相为3 mmol/L磷酸二氢铵溶液(pH 6.9)-乙腈(20:80, v/v),流速为0.8 mL/min,检测波长为220 nm。在该体系下,三聚氰胺和三聚氰酸二酰胺的保留时间适中,与样品中的内源性物质有良好的分离。样品经0.1%磷酸提取,偏磷酸及乙腈沉淀蛋白质和糖类物质,以及P-SCX固相萃取柱净化。三聚氰胺和三聚氰酸二酰胺在0.4～40 mg/L范围内与峰面积呈良好的线性关系,样品定量限(按信噪比(S/N)不小于10计)为2 mg/kg,在2～10 mg/kg添加水平下的平均回收率为80%～105%,相对标准偏差小于10%。该方法具有良好的分离选择性,可用于鸡蛋和肉中三聚氰胺和三聚氰酸二酰胺的同时检测。     

Application of single-drop microextraction to the determination of dialkyl phthalate esters in food simulants

A fast and simple method, using static single-drop microextraction (SDME), has been developed to facilitate the identification and quantification of seven dialkyl phthalate esters in the three aqueous food simulants. The simulants were: A, distilled water; B, 3% (w/v) acetic acid/water; and C, 15% (v/v) ethanol/water. The extraction is performed by simply suspending a drop of organic solvent in the aqueous sample using a conventional gas chromatography (GC) microsyringe. Following extraction, the organic phase is withdrawn into the syringe and analyzed by gas chromatography and flame ionization detection (FID). The optimized method yields a linear calibration curve over three orders of magnitude for all the simulants, and method detection limits (MDLs) allowing detection of all the studied compounds at concentrations below migration limits established by the European Union. The accuracy of the SDME method was tested and compared to that of solid-phase microextraction (SPME) by recovery experiments using spiked samples, with results ranging from 85 to 115% in most cases.     

Determination of aromatic amines in environmental water samples using solid-phase extraction modified with sodium dodecyl sulphate and micellar liquid chromatography

Extraction and determination of seven aromatic amines in environmental water samples were performed with solid-phase extraction (SPE) and micellar liquid chromatography (MLC) using experimental design. Extraction of aromatic amines was carried out with a C₁₈ cartridge modified with sodium dodecyl sulphate (SDS). The washing solution and elution solvent for extraction of aromatic amines were aqueous solution containing 5% (v/v) acetonitrile and 5% (v/v) acetone and 3 mL methanol, respectively. The chemometrics approach was applied for the separation optimisation of these compounds using MLC. Different mobile phase compositions were used for modelling based on retention times to obtain the best separation using central composite design. The optimum mobile phase composition for separation and determination of analytes in water samples was 69 mM SDS, 9% v/v 1-propanol and pH = 6.4. Recoveries were between 84.8–93.5% with relative standard deviation (RSD) less than 5.8% (n = 5). Limits of detection and linear range were 1–4.5 and 3.1–125.0 µg/L, respectively. The proposed method was applied to determine the aromatic amines in real samples (river and well waters). Amount of 4-nitroaniline and 3-nitroaniline in river water sample were 2.15 and 1.91 µg/L, respectively.     

LC–UV determination of atrazine and its principal conversion products in soil after combined microwave-assisted and solid-phase extraction

A multiresidue method developed for the analysis of atrazine and its principal conversion products, deisopropylatrazine (DIA), deethylatrazine (DEA) and hydroxyatrazine (HA), in soil is presented. The method is based on the microwave-assisted extraction (MAE) of soil with aqueous methanol followed by solid-phase extraction (SPE) of the extracts and subsequent analysis by LC–UV with a diode array detector. MAE operational parameters (extraction solvent, extractant volume) were optimized with respect to extraction efficiency of the target compounds from soils with 2.5% organic matter (OM) content. Recoveries above 80% were obtained for all solutes. Soil OM content did not affect analyte recoveries. Recoveries from fresh and aged residues, the latter weathered under cold storage conditions, were not statistically different. Finally, MAE was found to be superior in terms of extraction efficiency, sample throughput, and solvent consumption to conventional flask-shaking extraction.     

Determination of organophosphorus pesticide residues in the roots of Platycodon grandiflorum by solid-phase extraction and gas chromatography with flame photometric detection

A simple and rapid sample preparation method using accelerated solvent extraction and solid-phase extraction (SPE) cleanup for determining organophosphorus (OP) pesticides in the roots of Platycodon grandiflorum was developed. The OP pesticides were concentrated by use of an SPE cartridge (ENVI-Carb) and quantitatively analyzed and confirmed by capillary gas chromatography with flame photometric detection. The pesticides were eluted from the cartridges with 20 mL acetonitrile-toluene (3 + 1, v/v). The average recovery from 10 g PF grandiflorum roots, fortified at 3 levels ranging from 0.04 to 1.00 mg/kg, was 91.9% with a relative standard deviation of 4.3%. The limits of detection ranged from 1.16 x 10(-3) mg/kg (dimethoate) to 4.64 x 10(-3) mg/kg (dichlorvos). The proposed method showed acceptable accuracy and precision while minimizing environmental concerns, time, and labor.     

Sample preparation for routine high-performance liquid chromatographic determination of retinol palmitate in emulsified nutritional supplements by solid-phase extraction using monosodium L-glutamate as dissolving agent

Retinol palmitate (vitamin A, 73.3 microg/g) in an emulsified nutritional supplement was determined by solid-phase extraction (SPE) and high-performance liquid chromatography (HPLC) with fluorescence detection (excitation 350 nm, emission 480 nm) using monosodium L-glutamate as a dissolving agent to obtain higher recovery of vitamin A from the emulsified sample solution. A Bond Elut C2 cartridge (500 mg) was chosen for SPE after comparison with 16 other types. A sample solution was applied to a conditioned Bond Elut C2 cartridge and then vitamin A was eluted with ethanol followed by HPLC. The proposed method was simple, rapid (sample preparation time by SPE: ca. 8 min, retention time: ca. 8 min), sensitive [detection limit: ca. 0.1 pg/injection (100 microl) at a signal-to-noise ratio of 3:1], highly selective and reproducible (relative standard deviation (RSD): ca. 2.9% (n = 5), between-day RSD ca. 3.7 (5 days). The recovery of vitamin A was over 90% by the standard addition method.     

A comparative study of the ability of different solvents and adsorbents to extract aroma compounds from alcoholic beverages

Seven liquid solvent systems--dichloromethane, dichloromethane-pentane (1:1), freon 113, diethyl ether-pentane (1:1 and 1:9), ethyl acetate-pentane (with and without an additional salting-out effect) (1:3 and 1:20), and seven solid-phase extraction (SPE) systems (Amberlite XAD-2, 4, 7, and 16; Porapak Q; C8; and C18)--are comparatively studied. The distribution coefficients between the extraction system and a hydroalcoholic solution (12% v/v in ethanol, pH = 3.2) of 14 selected volatile compounds belonging to different chemical families and polarities are calculated. The results are processed by factor analysis and cluster analysis, and the following conclusions are reached. First, the efficiency of extraction decreases in this order: polymeric sorbents > silica-based sorbents > liquid-liquid systems with salting-out effect approximately dichloromethane > rest of liquid solvents. Second, the addition of salt mainly increases the recovery of compounds with Lewis acid properties. Third, the efficiency of the extraction of a liquid solvent depends not only on its polarity but also on its solubility in water. Fourth, in regards to the selectivity of the SPE systems, Porapak Q is the best to extract nonpolar compounds, Amberlite XAD 4 and 16 provide the least selective extraction profiles, and C8 and C18 have a special ability to extract compounds with a Br?nstedt-Lowry character. Results indicate that in all cases liquid solvents can be replaced satisfactorily by SPE systems.     

An improved method for the simultaneous analysis of phenolic and steroidal estrogens in water and sediment

This paper describes an improved method for the extraction and analysis of seven endocrine disrupting chemicals with wide-ranging polarities from water and sediments using gas chromatography-tandem mass spectrometry (GC-MS/MS). The analytes were 4-tert-octylphenol, 4-nonylphenol, bisphenol A, estrone, 17β-estradiol, 17α-ethynylestradiol and 16α-hydroxyestrone. The optimised GC-MS/MS method produces increased selectivity and sensitivity compared to GC-MS, with limit of detection ranging from 0.01 to 0.49 ng L⁻¹ in water and from 0.05 to 0.14 ng g⁻¹ in sediment. Extraction from aqueous samples was performed by solid-phase extraction (SPE) and from sediment samples by microwave-assisted extraction (MAE). The improved method for the clean-up of sediment extracts carried out by SPE enhanced EDC recovery (86-102%) while reducing matrix interference and sample drying time. Derivatisation of final sample extracts was achieved using N,O-bis(trimethylsilyl)trifluoroacetamide and pyridine, and their stability was enhanced by reconstituting the derivatised extracts with hexane. The method was validated by spiking experiments which showed good recovery and reproducibility. The method was applied to samples taken from the Medway estuary in Kent, UK, where non-conservative behaviour of EDCs was demonstrated.     

Comparison of different trapping methods for pressurised hot water extraction

Four trapping methods for pressurised hot water extraction were compared in terms of recovery and selectivity. Also, robustness, repeatability and solvent consumption of the trapping systems were investigated. The trapping methods were collection into solvent following liquid-liquid extraction, solid-phase trapping into Tenax TA (SPE), flat sheet microporous membrane liquid-liquid extraction and hollow fibre microporous membrane liquid-liquid extraction. Polycyclic aromatic hydrocarbons were extracted with these systems from four soil and sediment matrices and the extracts were analysed by GC-MS and size-exclusion chromatography. Clear differences were observed in the selectivity and extraction efficiencies of the trapping systems.     

Preparative separation and determination of matrine from the Chinese medicinal plant <Emphasis Type="Italic"> Sophora flavescens </Emphasis>Ait by molecularly imprinted solid-phase extraction

Molecularly imprinted microspheres (MIMs) were synthesized by micro-suspension polymerization using matrine (MT) as template. The MIMs were employed for solid-phase extraction (SPE) and as chromatographic stationary phase for the determination of MT from the Chinese medicinal plant Sophora flavescens. The effects of the various eluents, their concentrations and volumes on the retention behavior were investigated. The selectivity and capacity of the imprinted microspheres against MT was also discussed. The results showed that the MIMs exhibited stronger specific affinity to MT than to oxymatrine (OMT). Methanol-water (3:7, v/v) was used for washing impurities from the MIMs-SPE cartridge loaded with the herb extracts, while methanol-glacial acetic acid (9:1, v/v) was used for eluting MT. The maximum load of MT and the recovery of MIMs cartridge towards MT were 38.7 microg g(-1) and 71.4%, respectively. The method developed might be used to separate and extract effective constituents from Chinese medicinal plants on a large scale.     

A new process for preparation of soybean protein concentrate with hexane-aqueous ethanol mixed solvents

A new process for the preparation of soybean protein concentrate (SPC) by directly extracting full-fat soy flour with a mixture of hexane and aqueous ethanol was established. Compared with conventional methods, it has some advantages, such as saving energy and reducing protein denaturation caused by heat action during solvent recovery, because this process saves one step of solvent recovery. The effects of aqueous ethanol concentration and the mixure ratio (hexane to ethanol) on the degree of protein denaturation and product quality were investigated, on the basis of which the orthogonal tests were performed. The optimum technical parameters were obtained by analyzing the results of the orthogonal tests with statistical methods. We found that SPC can be obtained by extracting full-fat soy flour under the following conditions: mixture ratio hexane: 90% ethanol, 9:1, v/v; extraction temperature, 45 degrees C; ratio of solid to solvents, (1:2 w/v); and 5 repeated extractions (15 min each time). The results of quality analysis showed that solubility of the product was improved significantly [nitrogen solubility index (NSI) 46.6%] compared with that for ethanol washing of protein concentrate (NSI 8.7%).     

多羟基化合物键合亲水色谱固定相的制备及其分离性能

用硅胶与氨丙基三甲氧基硅烷反应,再与δ-葡萄糖酸内酯反应,制备了一种多羟基化合物键合的新型亲水色谱固定相。以水-有机溶剂(乙醇、乙腈、四氢呋喃)为流动相,通过改变流动相中有机溶剂的种类及浓度、缓冲盐浓度和柱温,考察了该固定相对6种强极性中药组分的保留行为和保留机理。当水的比例在0～40%(v/v)范围时,溶质的保留随着流动相中水的比例的增大而减小,属于典型的亲水色谱分离模式;而当流动相中水的比例在0～100%(v/v)范围内变化时,溶质的保留随着水的比例变化呈“U”形曲线,属于亲水色谱和反相色谱的混合保留机理。缓冲盐的浓度和pH效应说明,所选用的中药组分与所制备的固定相间还存在弱的静电作用。该固定相对6种中药组分以及丹参注射液具有良好的分离性能,表明其在强极性中药有效成分的分离及其他强极性物质的分离分析中具有一定的应用前景。