Engineering coercivity in YFe<Subscript>2</Subscript> dominated DyFe<Subscript>2</Subscript>/YFe<Subscript>2</Subscript> superlattice by patterning

Single crystal 400 nm thick Laves phase [20 Å?DyFe₂/80 Å?YFe₂]₄₀ superlattice have been grown by MBE with a (110) growth direction. VSM measurements performed at room temperature with an applied field range of ±1.2×10⁵ Oe, directed along the [001] direction, reveal a unique single-phase-liked ferrimagnetic behavior. A dominant exchange spring behavior is revealed by MOKE measurement along the [–110] direction. Furthermore, for striped arrays patterned along the [001] direction with height-to-width ratio of 0.05, a shape anisotropy of the order of 10⁴ erg/cm³ is induced, resulting into a pronounced change of coercivity due to the comparable magnitude with intrinsic anisotropies. The results demonstrate the feasibility of engineering both single-phase-liked and exchange-spring magnet behavior in Laves phase epitaxial hard/soft superlattices by patterning.     

Investigation of the magnetic properties and magnetic structure parameters of nanocrystalline Fe<Subscript>79</Subscript>Zr<Subscript>10</Subscript>N<Subscript>11</Subscript> films

The magnetic properties (magnetization curve, ferromagnetic resonance spectrum) of nanocrystalline Fe₇₉Zr₁₀N₁₁ films obtained by RF magnetron sputtering with subsequent annealing were studied experimentally, along with the fundamental magnetic constants of these films (saturation magnetization M _S, local magnetic anisotropy energy K, and the exchange coupling constant A). The magnetic properties are discussed within the random magnetic model, which determines the correlation of the magnetic properties with the fundamental magnetic constants and nanostructure parameters (grain size, magnetic anisotropy, and correlation radius R _C). The exchange correlation length 2R _L for the film magnetic microstructure was determined by correlation magnetometry.     

Ab initio study of La-doped BaSnO<Subscript>3</Subscript> proton conductor

The hydration properties of Lanthanum-doped barium stannate have been studied using density functional calculations. The interaction energy between elementary defects (proton-dopant and oxygen vacancy-dopant) have been calculated in charged states corresponding to p-type conditions. Surprisingly, the most attractive energies are not found for first-neighbor relative positions. The geometric distortions and the electronic densities of state in the different configurations involved are presented. With these data, two simple models are used to estimate the energy of the hydration reaction. Paper presented at the 11th EuroConference on the Science and Technology of Ionics, Batz-sur-Mer, Sept. 9–15, 2007.     

Structure and lattice dynamics of PrFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>: Ab initio calculation

The crystal structure and phonon spectrum of PrFe₃(BO₃)₄ are ab initio calculated in the context of the density functional theory. The ion coordinates in the unit cell of a crystal and the lattice parameters are evaluated from the calculations. The types and frequencies of the fundamental vibrations, as well as the line intensities of the IR spectrum, are determined. The elastic constants of the crystal are calculated. A “seed” frequency of the vibration strongly interacting with the electron excitation on the praseodymium ion is obtained for low-frequency A₂ mode. The calculated results are in agreement with the known experimental data.     

Structural,magnetic, and magnetothermal properties of the Tb<Subscript>0.3</Subscript>Dy<Subscript>0.7</Subscript>Co<Subscript>2</Subscript> compound

A complex investigation of the structural, magnetic, and magnetothermal properties of the Tb_0.3Dy_0.7Co₂ compound synthesized with the use of high-purity rare-earth metals has been performed. The phase composition has been controlled using the X-ray structural analysis, and the topology of the alloy surface has been investigated using atomic-force microscopy. It has been established that the Tb_0.3Dy_0.7Co₂ compound is single-phase, while the samples selected for measurements possess a clearly pronounced texture. The magnetization has been measured using a vibrating-sample magnetometer in the fields up to 100 kOe in a temperature range from 4.2 to 200 K. The Curie temperature of the compound is 170 K. The data on the temperature dependence of heat capacity of Tb_0.3Dy_0.7Co₂ have been obtained. The magnetocaloric effect ΔT has been measured by a direct method in the fields up to 18 kOe applied both along and perpendicularly to the texture axis. The anisotropic behavior of the magnitude ΔT for this compound, which possesses the cubic structure, has been found. The maximum value of the magnetocaloric effect ΔT = 2.3 K (ΔH = 18 kOe) has been observed upon applying the magnetic field along the texture axis.     

Electronic structure and magnetic properties of metastable SmCo<Subscript>7</Subscript> compound

The electronic density of states, spin-splittings and atomic magnetic moments of SmCO₇-compound have been studied using spin-polarized MS-Xα method. The results show that a few of electrons are transferred to Sm(5d⁰) orbital because of orbital hybridization between Sm and Co atoms in the compound. The exchange interactions between 3d and 5d electrons lead to the magnetic coupling between Sm and Co, and therefore, result in the long-range ferromagnetic order inside the SmCo₇ compound. There are negative exchange couplings occurring at some levels, which weakens the strength of average coupling around Co lattice. So, the Curie temperature and Co-moment of SmCo₇-decrease distinctly compared with pure Co. Compared with SmCo₅ compound, the disordered substitution of Co-Co “dumbbell-atom” pairs for Sm changes the local environment of Co lattice, which makes the 2e site bear negative magnetic moment. The strength of hybridization near Fermi level weakens and the free energy of the compound increases obviously. Thus, SmCo₇ is a metastable compound at room temperature. Considering the localization of 4f electrons and a few of 5d electrons arising from the orbital hybridization, the magnetic moment of Sm atom will be 1.61μ_B in SmCo₇ compound, which is in agreement with the experimental values of Sm³⁺ ion-moment and Sm atom-moment in metals.     

Structure and dynamics of the Lu<Subscript>2</Subscript>Si<Subscript>2</Subscript>O<Subscript>7</Subscript> lattice: Ab initio calculation

The ab initio calculations have been carried out for the crystal structure and Raman spectrum of a single crystal of lutetium pyrosilicate Lu₂Si₂O₇. The types of fundamental vibrations and their frequencies and intensities in the Raman spectrum for two polarizations of the crystal have been determined. The calculations have been performed within the framework of the density functional theory (DFT) using the hybrid functionals. The ions involved in the vibrations have been identified using the method of isotopic substitution. The results of the calculations are in good agreement with the experiment.     

Ab initio study of thermoelectric properties of Cu<Subscript>3</Subscript>PSe<Subscript>4</Subscript> and Cu<Subscript>3</Subscript>PS<Subscript>4</Subscript>: alternative materials for thermoelectric applications

This letter discusses the thermoelectric properties of Cu₃PSe₄ and Cu₃PS₄ compounds, using the Ab initio calculations. These compounds are predicted to be good thermoelectric materials thanks to the nature of their band edge states. Seebeck coefficient of Cu₃PSe₄ exhibits a maximum value of 1256 µV/K at roopm temperature, whereas it is 2389 µV/K for Cu₃PS₄. Furthermore, the electrical conductivity is significantly enhanced with doping level while the electronic thermal conductivity is weakly increased. Besides, the factor of merit of these compounds shows a value around the unity only at low doping levels. Hence, this predicts that these compounds may present excellent thermoelectric properties, therefore they could be considered as alternatives for thermoelectric applications.     

Synthesis and structural,magnetic, and resonance properties of the LiCuFe<Subscript>2</Subscript>(VO<Subscript>4</Subscript>)<Subscript>3</Subscript> compound

Complex studies have been performed for the structural, static magnetic, and resonance properties of a new magnet LiCuFe₂(VO₄)₃ prepared by solid-phase synthesis. The temperature dependence of the susceptibility has an anomaly at temperature T_max = 9.6 K. At high temperatures, the LiCuFe₂(VO₄)₃ sample is in the paramagnetic state described by the Curie–Weiss law at T > 50 K and mainly determined by iron ions with effective magnetic moment μ_eff(exp) = 8.6μ_B per formula unit. At low temperatures, a long-range magnetic order is observed in the magnetic subsystem of the sample; the order is predominantly characterized by the antiferromagnetic exchange interaction and high frustration level. The exchange interaction parameters are estimated in a six-sublattice representation of the LiCuFe₂(VO₄)₃ magnet. It is shown that the LiCuFe₂(VO₄)₃ compound is an antiferromagnet with strong intrachain and frustrating interchain exchange interactions.     

Half-metallicity in Rh-doped TiO<Subscript>2</Subscript> from ab initio calculations

First-principles calculations based on density functional theory (DFT) are performed to study the electronic structures and magnetic properties of Rh-doped TiO₂ crystals. The hybridization between Rh-4d and O-2p results in Rh becoming ferromagnetic with a magnetic moment of about 1.0 μ _B per supercell. The Rh-doped TiO₂ system exhibits half-metallic ferromagnetism based both DFT and DFT + U. The strong ferromagnetic couplings between local magnetic moments can be attributed to both the p-d hybridization and double-exchange mechanisms, as well as superexchange interaction. These results suggest an alternative approach to achieve promising dilute magnetic semiconductors by doping non-magnetic transition metals in a TiO₂ host.     

Phonon and electronic properties of the LiCaAlF<Subscript>6</Subscript> crystal: Experiment and ab initio calculations

The results obtained in a cell with a distance between windows on the order of several hundreds of nanometers (the so-called “nanocell”) are presented. The nanocell thickness L in the vertical direction changes from 100 to 900 nm. It is shown that the use of a nanocell with thickness L = λ/2, where λ is a laser wavelength resonant to the atomic transition D2 in sodium atoms, provides sub-Doppler resolution of transmission and fluorescence spectra.     

Ab initio study of 2DEG at the surface of topological insulator Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>

By means of ab initio DFT calculation, we analyze the mechanism that drives the formation and evolution of the 2D electron gas (2DEG) states at the surface of Bi₂Te₃ topological insulator (TI). As it has been proved earlier it is due to an expansion of the van der Waals (vdW) spacing produced by intercalation of adsorbates. We will show that the effect of this expansion, in this particular surface, leads to several intriguing phenomena. On one hand we observe a different dispersion of the Dirac cone with respect to the ideal surface and the formation of Parabolic Bands (PB) below the conduction band and M-shaped bands in the valence band, the latters have been observed recently in photoemission experiments. On the other hand the expansion of the vdW gaps changes the symmetry of the orbitals forming the Dirac cone and therefore producing modifications in the local spin texture. The localization of these new 2DEG-states and the relocalization of the Dirac cone will be studied as well.     

Physical properties and phase diagram of the magnetic compound Cr<Subscript>0.26</Subscript>NbS<Subscript>1.74</Subscript> at high pressures

We report the results of a study of magnetic, electrical, and thermodynamic properties of a single crystal of the magnetic compound Cr_0.26NbS_1.74 at ambient and high pressures. Results of the measurements of magnetization as a function of temperature reveal the existence of a ferromagnetic phase transition in Cr_0.26NbS_1.74. The effective number of Bohr magnetons per Cr atom in the paramagnetic phase of Cr_0.26NbS_1.74 is µ_eff ≈ 4.6µB, which matches the literature data for Cr1/3NbS2. Similarly, the effective number of Bohr magnetons per Cr atom in the saturation fields is rather close in both substances and corresponds to the number of magnetons in the Cr⁺³ ion. In contrast to the stoichiometric compound, Cr_0.26NbS_1.74 does not show a metamagnetic transition, that indicates the lack of a magnetic soliton. A high-pressure phase diagram of the compound reveals the quantum phase transition at T = 0 and P ≈ 4.2 GPa and the triple point situated at T ≈ 20 K and P ≈ 4.2 GPa.     

Phonon spectrum of lead oxychloride Pb<Subscript>3</Subscript>O<Subscript>2</Subscript>Cl<Subscript>2</Subscript>: Ab initio calculation and experiment

IR and Raman spectra of Pb₃O₂Cl₂ in the range of 50–600 cm^–1 have been detected for the first time. Ab initio calculations of the crystal structure and the phonon spectrum of Pb₃O₂Cl₂ in the framework of LCAO approach have been performed by the Hartree–Fock method and in the framework of the density functional theory with the use of hybrid functionals. The results of calculations have made it possible to interpret the experimental vibration spectra and reveal silent modes, which do not manifest themselves in these spectra but influence the optical properties of the crystal.     

Ab initio study of I<Subscript>2</Subscript> and T<Subscript>2</Subscript> stacking faults in C14 Laves phase MgZn<Subscript>2</Subscript>

Based on the synchroshear mechanism, the formation of intrinsic stacking fault I ₂ and twin-like stacking fault T ₂ in C14 Laves phases has been modeled in detail and the generalised stacking fault energy curve of I ₂ and T ₂ for C14 Laves phase MgZn₂ has been calculated from first-principles. The results demonstrate that the unstable stacking fault energy of I ₂ by synchroshear is still very large, and the stable stacking fault energy of I ₂ is higher in comparison with pure Mg implying that the formation of I ₂ stacking fault in MgZn₂ is difficult. Starting with the I ₂ configuration, the T ₂ stacking fault can be formed by an additional synchroshear. The unstable and stable stacking fault energies of T ₂ are only slightly larger than those of I ₂, implying that the formation of T ₂ may be essentially similar to that of I ₂. From the obtained generalised stacking fault energy, the relevant deformation mechanism of MgZn₂ is also discussed. Finally, the electronic structure during synchroshear process is further studied.     

Ab initio calculations of the atomic and electronic structure of MgF<Subscript>2</Subscript> (011) and (111) surfaces

The results of ab initio slab calculations of surface relaxations, rumplings and charge distribution for the different terminations of the MgF₂ (011) and (111) polar surfaces are presented and discussed. We have employed the computer code CRYSTAL with the Gaussian basis set and the hybrid B3PW exchange-correlation functional. Despite the ionic nature of the chemical bonding at both surfaces, a considerable decrease of the optical band gap is predicted (1.3 eV or 10%) for the (111) surface as compared to the bulk.     

Reactions C<Subscript>2</Subscript>H<Subscript>2</Subscript> + OH and C<Subscript>2</Subscript> + H<Subscript>2</Subscript>O: Ab initio study of the potential energy surfaces

The stationary points of the potential energy surfaces for the reactions C₂H₂ + OH and C₂ + H₂O are calculated using density functional theory and the coupled cluster method. The relative energies and geometric parameters of the stable intermediates and transition states are in good agreement with the results of independent studies. In most cases, the relative energies differ from the earlier published values by no more than 3 kcal/mol, whereas the rotational constants, by 1–2%. The mechanism of the reaction CCOH₂ → C₂ + H₂O is studied in detail. The possible sources of errors in the calculation methods are examined.     

Optical properties of films of the ternary compound CuIn<Subscript>3</Subscript>Se<Subscript>5</Subscript>

We have used the laser vaporization method to obtain films of the ternary compound CuIn₃Se₅ and have studied the composition and structure of the films obtained. We have determined the energy and nature of the optical transitions for the indicated compound from the transmission spectra in the region of the intrinsic absorption edge. We have calculated the valence-band crystal-field (Δ_CF) and spin-orbit (Δ_SO) splitting energies according to Hopfield’s quasicubic model for the ternary compound CuIn₃Se₅. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 1, pp. 82–85, January–February, 2007.     

Synthesis and magnetic properties of FeNi<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> core-shell nanocomposites

In this study, FeNi₃/Al₂O₃ core-shell nanocomposites, where individual FeNi₃ nanoparticles were coated with a thin layer of alumina, were fabricated by a modified sol-gel method. Several physical characterizations were performed on the samples of FeNi₃/Al₂O₃ nanocomposites with different thickness of Al₂O₃ shell. The encapsulation of FeNi₃ nanoparticles with alumina stops FeNi₃ agglomeration during heat treatment, and prevents interaction among the closely spaced magnetic FeNi₃ nanoparticles. The Al₂O₃ insulating shell improves the soft magnetic properties of FeNi₃. The study of the complex permeability of the samples shows that the real part μ’ of the permeability of the sample with Al molar content of 20% (Al/(Fe+Ni)) is as high as 12, and independent of frequency up to at least 1 GHz. The tunneling magnetoresistance arising from the presence of the Al₂O₃ shell have also been studied.