<Superscript>2</Superscript>H NMR investigation of the transition to the proton glass state in the Cs<Subscript>5</Subscript>H<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> · 0.5H<Subscript>2</Subscript>O crystal

A crystal of the Cs₅H₃(SO₄)₄ · xH₂O (x ≈ 0.5) (PCHS) compound, which belongs to the family of proton conductors with a complex system of hydrogen bonds, is investigated by ²H NMR spectroscopy. The temperature and orientation dependences of the ²H NMR spectra are measured and analyzed. It is established that, upon transition to the glassy phase at the temperature T _g = 260 K, the parameters characterizing the proton exchange between positions in hydrogen bonds remain unchanged to within the limits of experimental error. The protons in the two-dimensional network of hydrogen bonds in the (001) plane are dynamically disordered over possible positions down to temperatures considerably lower than the glass transition point T _g . However, water molecules are fixed at particular structural positions in the phase transition range. In PCHS crystals with a nonstoichiometric water content, this circumstance can be responsible for the frustration that leads to the formation of the glassy state.     

Heat capacity of the [N(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>CdBr<Subscript>4</Subscript> crystal in the temperature range 80–300 K

The heat capacity of the [[N(C₂H₅)₄]₂CdBr₄ crystal is measured by the calorimetric method in the temperature range from 80 to 300 K. It is revealed for the first time that the temperature dependence of the heat capacity C _p (T) exhibits an anomaly associated with the first-order phase transition occurring at the temperature T ₁ = 226.5 K. A long relaxation of the temperature of the crystal is observed in the temperature range 150–165 K.     

Specific heat of the [NH<Subscript>2</Subscript>(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>]<Subscript>2</Subscript>ZnCl<Subscript>4</Subscript> crystal in the temperature region 80–300 K

The specific heat of [NH₂(CH₃)₂]₂ZnCl₄ was measured calorimetrically in the temperature region 80–300 K. As the temperature T decreases, the C _p (T) dependence indicates a phase transition sequence, with the phase transition at T₆=151 K observed for the first time. The thermodynamic characteristics of the crystal were refined. The transformation occurring at T₂=298.3 K is shown to be an incommensurate-commensurate phase transition.     

Anomalous states of the structure of [Rb<Subscript>0.7</Subscript>(NH<Subscript>4</Subscript>)<Subscript>0.3</Subscript>]<Subscript>2</Subscript>SO<Subscript>4</Subscript> crystals in the temperature range 4.2–300 K

Crystals of [Rb_0.7(NH₄)_0.3]₂SO₄ solid solutions are studied using x-ray diffractometry in the temperature range 4.2–300 K. No anomalies are revealed in the temperature dependences of the lattice parameters and the volume of the host unit cell. A series of superstructure reflections observed along the basis axes corresponds to the guest lattice formed in the matrix of the host structure. From analyzing the axial ratio of these structures and their temperature dependences, it is concluded that the structure of the crystal has the form of an incommensurate composite. The guest structure of the composite at room temperature can be considered a set of chains that are not correlated along the b direction. In the plane perpendicular to the chain axes, these chains form a regular framework that is also incommensurate to the host lattice.     

Origin of the structural local transition in the molecular impurity ion MnO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack> in the K<Subscript>3</Subscript>Na(CrO<Subscript>4</Subscript>)<Subscript>2</Subscript> ferroelastic

A new model is proposed for a local transition in a Jahn-Teller impurity center in a crystal with a ferroelastic (ferroelectric) phase transition. This model is based on direct interaction of the order parameter of the phase transition in the matrix with the Jahn-Teller impurity degrees of freedom. It is shown that, under these conditions, the order parameter field can induce lifting of degeneracy of the electronic states active in the Jahn-Teller effect, which is accompanied by a transition from the Jahn-Teller effect to the pseudo-Jahn-Teller effect with its subsequent suppression. As a result, a decrease in temperature gives rise to a structural local transition in the region of the low-symmetry ferroelastic (ferroelectric) matrix phase from the many-well local adiabatic to a single-well potential. The model proposed allows interpretation of experimental data obtained in an EPR study of the molecular impurity ion MnO ₄ ^2? in the K₃Na(CrO₄)₂ ferroelastic.     

Structural properties of composite cathode material LiFePO<Subscript>4</Subscript>–Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Composite cathode material LiFePO₄–Li₃V₂(PO₄)₃ is synthesized through a chemical reduction and lithiation using FeVO₄·xH₂O as both iron and vanadium sources. The structural properties of LiFePO₄–Li₃V₂(PO₄)₃ are investigated. X-ray diffraction results show the composite material containing olivine type LiFePO₄ and monoclinic Li₃V₂(PO₄)₃ phases. High-resolution transmission electron microscopy and energy-dispersive X-ray spectrometry results indicate that mutual doping effects take place between the LiFePO₄ and Li₃V₂(PO₄)₃ particles with V³⁺ doping the LiFePO₄ while Fe²⁺ dopes the Li₃V₂(PO₄)₃. LiFePO₄–Li₃V₂(PO₄)₃ nanocomposites are formed in the carbon webs. There is no structural compatibility between monoclinic (Li₃V₂(PO₄)₃) and olivine (LiFePO₄) domains in composite material LiFePO₄–Li₃V₂(PO₄)₃.     

Preparation and characterization of organic–inorganic hybrid compound [N(C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>Cu<Subscript>2</Subscript>Cl<Subscript>6</Subscript>

Organic–inorganic hybrid sample [N(C₄H₉)₄]₂Cu₂Cl₆ was prepared via the reaction between copper chloride and tetrabutylammonium chloride. The compound was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC), DTA-TGA analysis and electrical impedance spectroscopy. DSC studies indicate a presence of one-phase transition at 343 K. The complex impedance of compound [N(C₄H₉)₄]₂Cu₂Cl₆ have been investigated in temperature and frequency ranges 300–380 K and 200 Hz–5 MHz, respectively. The Z′ and Z″ versus frequency plots are well fitted to an equivalent circuit model. The circuits consist of the parallel combination of bulk resistance R _p and constant phase elements CPE. The frequency dependence of the conductivity is interpreted in term of Jonscher's law: s(w) = s_dc + Awⁿ \sigma (\omega ){ } = {\sigma_{\rm{dc}}} + { }A{\omega^n} . The conductivity follows the Arrhenius relation. The variation of the value of these elements with temperatures confirmed the availability of the phase transition at 343 K detected by DSC and electrical measurements.     

Synthesis and characterization of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>·LiMn<Subscript>0.33</Subscript>Fe<Subscript>0.67</Subscript>PO<Subscript>4</Subscript>/C cathode materials

A new polyanionic cathode material, Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C for lithium-ion batteries, was synthesized using a sol-gel method and with N,N-dimethyl formamide as a dispersion agent. The analysis of electron transmission spectroscopy and X-ray diffraction revealed that the composite contained two phases. The material has high crystallinity with a grain size of 20–50 nm. The valence states of Mn, V, and Fe in the composite were analyzed by X-ray photoelectron spectroscopy. The electrochemical kinetics in Li₃V₂(PO₄)₃ is effectively enhanced by the incorporation of LiMnPO₄ and LiFePO₄, via structure modification and reduced Li diffusion length. The Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C materials displayed high rate capacity and steady cycle performance with discharge capacity remained 148 mAh g^?1 after 50 cycles at the rate of 0.2C. In particular, the composite exhibited excellent reversible capacities, with the values of 157, 134, 120, 102, and 94 mAh g^?1 at charge/discharge 0.2, 0.5, 1, 2, and 5C rates, respectively.     

Calculation of refractive indices for the (NH<Subscript>2</Subscript>CH<Subscript>2</Subscript>COOH)<Subscript>2</Subscript> · HNO<Subscript>3</Subscript> crystal

The refraction R of the diglycine nitrate (DGN) crystal, (NH₂CH₂COOH)₂ · HNO₃, in the para-and ferroelectric phases has been calculated in the model of noninteracting diatomic chemical bonds of the elementary unit cell of the crystal on the basis of the longitudinal and transversal polarizabilities of these bonds. The calculated magnitudes of the principal refractive indices n _p , n _m , and n _g and the orientations of the optical indicatrix of the crystal agree satisfactorily with experimentally observed values. Introducing the coefficient of Lorenz-Lorentz interaction x into the corresponding formula permits better agreement of the calculated and experimental refractive indices of DGN crystal to be obtained. The temperature changes of these x coefficients upon the ferroelectric phase transition in the DGN crystal have been analyzed.     

Effect of γ irradiation on the thermochromic phase transition in [(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>2</Subscript>NH<Subscript>2</Subscript>]<Subscript>2</Subscript>CuCl<Subscript>4</Subscript> crystals (as derived from heat capacity measurements)

The heat capacity of [(C₂H₅)₂NH₂]₂CuCl₄ crystals, both nonirradiated and γ-irradiated to a dose of 10⁷R, was studied in the temperature interval 90–330 K by adiabatic calorimetry. The temperature dependence of C_p(T) was found to have a peak-shaped anomaly in the region of the thermochromic phase transition (PT) at T = 322.7 K. Smoothened experimental heat capacity data were used to calculate the changes in the thermodynamic functions. The changes in the entropy and enthalpy of the thermochromic PT were determined to be ΔS = 42 J K^?1 mol^?1 and ΔH = 13653 J mol^?1 for the nonirradiated crystals and ΔS = 39 J K^?1 mol^?1 and ΔH = 12120 J mol^?1 for the irradiated crystals, respectively. Irradiation of a [(C₂H₅)₂NH₂]₂CuCl₄ crystal by γ rays to a dose of 10⁷ R was shown to shift the PT point toward lower temperatures by ΔT ≈ 1.7 K.     

Temperature dependence of the quenching of N<Subscript>2</Subscript> (C <Superscript>3</Superscript>Π<Subscript>u</Subscript>) by N<Subscript>2</Subscript> (X) and O<Subscript>2</Subscript> (X)

The temperature dependences of the quenching rate constants of the states N₂ (${\rm C} \ {^{3}{ \rm \Pi }_{u}}${\rm C} \ {^{3}{ \rm \Pi }_{u}} v^′=0,1) by N₂ (X) and of the state N₂ (${\rm C} \ {^{3}{ \rm \Pi }_{u}} \ v^{\prime}=0${\rm C} \ {^{3}{ \rm \Pi }_{u}} \ v^{\prime}=0) by O₂ (X) are studied. Time-resolved light emission from the gas was analyzed in the temperature range from 300 K to 210 K keeping the gas at constant density. In case of quenching by N₂ (X), the quenching rate constant for the vibrational level v^′= 0 increases by (13 ±3)% with gas cooling whereas the quenching rate constant for v^′= 1 decreases by (5.0 ±2.5)% in this temperature range. For quenching by O₂ (X), the quenching rate constant decreases by (3 ±2)% with gas cooling. The temperature variation of the N₂ (C ³Π_u v^′=0) emission intensity for pure nitrogen and dry air are calculated using the obtained quenching rate constants and is compared with the experimental data available in the literature.     

Electrical switching in the MoO<Subscript>3</Subscript>–WO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> and MoO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

High field electrical switching on blown films of MoO₃(60%)–P₂O₅(40%), MoO₃(50%)–WO₃(10%)–P₂O₅(40%), and MoO₃(45%)–WO₃(15%)–P₂O₅(40%) having different thicknesses was studied and compared. Switching was observed using two terminal samples. S-type current–voltage characteristic (current-controlled negative resistance—CCNR) with memory was observed in molybdenum–phosphate glasses, but N-type characteristic (voltage-controlled negative resistance—VCNR) with threshold in tungsten–molybdenum–phosphate glasses was observed. The important observation was that with the addition of WO₃ to binary MoO₃–P₂O5 led to a change of I–V characteristic from CCNR with memory to VCNR with threshold. The measurements of density and molar volume showed linear relation between MoO₃ content and density which decreased with the increase of MoO₃ content. The samples’ thickness had no significant effect on threshold voltage. The attained results also indicated that the electrode material had no effect on switching property of devices. The switching behavior of the devices did not show any dependence on the polarity of the applied voltage. In terms of the effect of heat on the switching behavior of molybdenum–phosphate glasses, it was found that threshold voltage decreases with increasing of temperature. Finally, the switching phenomenon was explained by thermal (formation of crystalline filaments) and electronic models.     

XRD,impedance, and Mössbauer spectroscopy study of the Li<Subscript>3</Subscript>Fe<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> + Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> composite for Li ion batteries

The synthesis procedure of the Li₃Fe₂(PO₄)₃?+?Fe₂O₃ composite is presented. The monoclinic (A type) and hematite phases were detected by X-ray diffraction after the synthesis of the composite. The structural α–β (at a temperature of 460 K) and β–γ (at a temperature of 523 K) phase transitions in the composite were indicated by the anomalies of the electrical conductivity, dielectric permittivity, and changes of activation energies of conductivity. Two phase transitions have been detected in the Li₃Fe₂(PO₄)₃?+?Fe₂O₃ composite by ⁵⁷Fe Mössbauer spectroscopy: the phase transition in Li₃Fe₂(PO₄)₃ from the paramagnetic to antiferromagnetic phase at temperature T _N?=?29.5 K and the Morin phase transition in Fe₂O₃ at temperature T _M?=?235 K.     

O<Subscript>2</Subscript> photodesorption from AuO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> and Au<Subscript>2</Subscript>O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack>

Using time-resolved photoelectron spectroscopy, the decay channels of AuO₂⁻ and Au₂O₂⁻ following photoexcitation with 3.1-eV photons have been studied. For AuO₂⁻, a state with a rather long lifetime of 30 ps has been identified. Its decay path could not be determined but photodesorption can be excluded. For Au₂O₂⁻, the spectra indicate O₂ desorption after 3.1-eV photoexcitation on a time scale of 1 ps. While comparing these results on Au _n O₂⁻ with analogous data on Ag _n O₂⁻ clusters, a discernible pattern emerges: for dissociatively bound O₂(AuO₂⁻, Ag₃O₂⁻), there are long-living excited states which do not decay by oxygen desorption, while for molecular chemisorption (Au₂O₂⁻, Ag₂O₂⁻, Ag₄O₂⁻, Ag₈O₂⁻), the 3.1-eV photoexcitation triggers fast O₂ desorption with a high quantum yield.     

A study of the effect of gradual substitution NH<Subscript>4</Subscript> → Cs on phase transitions in NH<Subscript>4</Subscript>LiSO<Subscript>4</Subscript> crystals

Solid solutions in the Cs_x(NH₄)_1?xLiSO₄ (0≤x≤0.35) system are grown and investigated. The birefringence (n_a?n_b) and the heat capacity are measured in the temperature range 100–530 K. The (x-T) phase diagram is constructed. It is demonstrated that the substitution of cesium for ammonium in the NH₄LiSO₄ crystal affects the transition temperatures in such a way that the region of the ferroelectric phase increases and the ferroelastic phase disappears at x>0.22. The character of the high-temperature transition remains unchanged (2β=0.24±0.01 for all compositions), but the birefringence anomaly and enthalpy decrease. As the concentration x increases, the low-temperature transition becomes more similar to a first-order transition: the birefringence jump δn and the temperature hysteresis ΔT increase.     

Antiferromagnetic inclusions in organic semiconductor (DOEO)<Subscript>4</Subscript>[HgBr<Subscript>4</Subscript>] · TCE

The systematic studies of the electronic state of surface layers in organic semiconductor (DOEO)₄[HgBr₄] · TCE by X-ray photoelectron spectroscopy and UV photoelectron spectroscopy are performed. At temperatures below 50–70 K, a transition to the antiferromagnetic state is observed in inclusions having a different structure compared to the crystal bulk. According to transmission electron microscopy, there are two types of antiferromagnetic inclusions in the samples, with sizes of 2–5 and 100–400 nm. The contributions of antiferromagnetic inclusions and the spins of localized and free charge carriers (holes) to the total magnetic moment of the crystal are separated.     

Proton NMR study of the organic metal κ-(BETS)<Subscript>2</Subscript>Mn[N(CN)<Subscript>2</Subscript>]<Subscript>3</Subscript>

Magnetic properties of the organic conductor κ-(BETS)₂Mn[N(CN)₂]₃ above and below the temperature of the metal-insulator transition that occurs at T _MI ≈ 25 K are studied by ¹H NMR. The proton spectrum is shown to be determined by the static dipolar fields from Mn²⁺ localized moments, while the ¹H spin-lattice relaxation is dominated by fluctuating fields from Mn²⁺ electrons. The NMR data, both static (the spectra) and dynamic (the spin-lattice relaxation), indicate the freezing of Mn²⁺ moments into a short-range or an incommensurate long-range antiferromagnetic order below T _MI.     

Hydrogen bond and exchange interaction in the (CuSO<Subscript>4</Subscript>)(en)·2H<Subscript>2</Subscript>O and (CuSO<Subscript>4</Subscript>)(en)·2D<Subscript>2</Subscript>O organometallic compounds

The influence of the replacement of hydrogen with deuterium in molecules of water of crystallization in the structure of the (CuSO₄)(en) · 2H₂O and (CuSO₄)(en)·2D₂O organometallic compound molecules on exchange interaction between copper ions was studied. The X-ray structural data and the data on angular anisotropy of the effective g-factor of Cu²⁺ ions in both compounds show that distortions of the initial structure caused by deuteration are minimum. A comparative analysis of the width of the exchange coupled EPR lines of the two compounds is indicative of a decrease in the exchange parameter in the deuterated sample, which substantiates the participation of H-bonds in exchange interactions in the systems studied.