MINi5—xSnx合金贮氢性能研究

研究了富镧混合稀土贮氢合金ＭＩＮｉ５及加Ｓｎ后对合金的结构、活化性能、吸氢容量和平衡氢压等性能的影响。通过Ｘ射线衍射分析进行物相分析,测试了２９８,３１３,３３３Ｋ温度下合金的吸、放氢Ｐ－Ｃ－Ｔ曲线。结果表明,ＭＩＮｉ５－ｘＳｎｘ合金（ｘ＝０～０．４）为六言晶体结构的单相组织。以Ｓｎ部分取代Ｎｉ改善了ＭＩＮｉ５的活化特性,并使平台压力降低、吸、放氢滞后减小。随着Ｓｎ含量增加,晶胞体积增大,平衡氢压     

掺硅MlNi5系稀土贮氢合金电化学性能

对ＭｌＮｉ３．５Ｃｏ０．７５－ｘＳｉｘＡｌ０．２Ｍｎ０．５５的显微组织结构及电化学性能进行了系统的研究。当ｘ＝０．１,０．２时,合金的放电容量较大、活化速度快、大电流放电容量较高、放电电压稳定。Ｘ射线分析和扫描电镜观察表明该系合金由ＬａＮｉ３与Ｌａ２Ｎｉ７两相组成,且随Ｓｉ含量的提高,非贮氢相ＬａＮｉ７相增加。     

La1-xNdx(NiCoMnAl)5贮氢合金性能研究

研究了不同ｘ值的Ｌａ１－ｘＮｄｘ（ＮｉＣｏＭｎＡｌ）５合金的晶格常数、氢平衡压力、放电容量及大电流放电性能。测定结果表明，合金晶胞体积随ｘ值增加呈线性关系减小；当ｘ＝０２时，电极容量达到最大值，而氢平衡压力最低。     

氢中杂质CO对LaNi5,LaNi4.7A10.3,MlNi4.5Al0.5合金

研究了３种贮氢合金,即ＬａＬｉ５,ＬａＮｉ４．７Ａｌ０．３,ＭｌＮｉ４．５Ａｌ０．５在纯氢（９９．９９９％）及含０．０１％ＣＯ气体杂质氢中毒化前后的ＰＣＴ特性。对于ＬａＮｉ５,毒化后不出现平台;对ＬａＮｉ４．７Ａｌ０．３及ＭｌＮｉ４．５Ａｌ０．５合金,平台压升高,平台倾斜加剧,平台宽度缩小,饱和吸氢量减小。ＬａＮｉ５中加入少量ＡＬ后,可以提高其抗毒化能力。分析了ＰＣＴ平台变短、倾斜的原因。     

含锡AB5型非化学计量贮氢合金Ⅱ.电化学性能

研究了几种ＡＢ５非化学计量贮氢合金的电化学性能,及在低电流密度与电高流密度放电下了代元素对放电比容量、活化性能及循环寿命的影响。Ｓｎ,Ｃｏ,Ｍｎ的加入有利于提高合金的电化学氢容量,Ｌａ（ＮｉＳｎ）５．１４,Ｌａ（ＮｉＳｎＣｏ）５．１２和（ＮｉＳｎＭｎ）５．１２具有相同的电化学贮氢容量与活性特性。尽管Ｌａ（ＮｉＳｎ）５．１４大电流电性能优于Ｌａ（ＮｉＳｎＣｏ）５．１２和Ｌａ（ＮｉＳｎＭｎ）５．１２,     

富镧混合稀土贮氢合金分离氢中Kr,Xe性能的研究

叙述Ｍ１Ｎｉ４．５Ａｌ０．５贮氢合金分离氢中氪、氙的基本原理，分了分离时氢中氪、浓度与分离温度的关系。结果表明，当Ｔ为２９８Ｋ时，贮氢合金Ｎ１Ｎｉ４．５Ａｌ０．５与ＴｉＦｅ０．８６Ｍｎ０．１的分离性能基本相似，分离浓度与放氢体积符合Ｎ＝ａｅ＾－ｂｒ方程。     

表面化学镀对贮氢合金MmNi3.8Co0.5Mn0.4Al0.3性能的影响

在贮氢合金ＭｍＮｉ３．８Ｃｏ０．５Ｍｎ０．４Ａｌ０．３（Ｍｍ为混合希土）粉末表面分别进行化学镀Ｃｕ，Ｃｏ，Ｎｉ，Ｎｉ－Ｃｏ，Ｎｉ－Ｓｎ，Ｎｉ－Ｗ。结果表明不同化学镀对合金贮氢性能有很大影响。     

机械合金化Mg/MmNi5-x(CoAlMn)x复合储氢合金的组织结构与吸氢特性

运用Ｘ射线衍射、扫描电及粒度分析等方法表征了机械合金化制备Ｍｇ／ＭｎＮｉ５－ｘ（ＣｏＡｌＭｎ）ｘ复合储氢合金的结构,通过ＰＣＴ曲线研究了基储氢性能。结果表明,在适当的球磨条件下能够获得纳米晶结构的Ｍｇ／ＭｎＮｉ５－ｘ（ＣｏＡｌＭｎ）ｘ复合储氢合金,ＭｍＮｉ５－ｘ（ＣｏＡｌＭｎ）ｘ合金相彘,复合储氢合金的活化性能及储氢量有明显提高。此外,还考察了Ｍｇ含量对复合储氢合金的组织结构及储氢性能的影响。     

锆系Laves相储氢合金电极的性能研究

Ｚｒ（Ｖ０．２Ｍｎ０．２Ｍｏ０．０６Ｎｉ０．５４）２．４合金经ＨＦ溶液处理后，合金表面由富Ｚｒ和富Ｍｎ层转变成富Ｎｉ层，从而使电极初期活化周期明显缩短，电极表面氢吸附性能改善。表面反应电阻减小。本文探讨了上述电极表面反应机理，即表面Ｎｉ的催化、氢吸附和氢转移机理，对阻抗谱进行拟合，给出了相应的电极反应等效电路。     

LaNi5-xMx高温氢化的歧化行为

采用Ｘ射线衍射、差热分析及电化学方法，研究了吸氢合金ＬａＮｉ５－ｘ－Ｍｘ（Ｍ＝Ｍｎ，Ｃｏ，Ｆｅ，Ｃｒ，Ａｌ）在高温氢化反应时的歧化行为及其反应产物的电化学性能。ＬａＮｉ５－ｘＭｘ在２．５ＭＰａ氢压和５５０℃以上保温一地间后可发生明显的歧化反应，并析出纳米相镍。歧化反应的程度与加热温度、时间、第三组元Ｍ及合金的生成焓关系密切。电化学交换电流密度测定表明，经歧化反应得到的含纳米相镍的复相组织与原始合金     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.