Preparation and Electrochemical Behaviors of AA-PEGMA Copolymer Film Electrode

A new kind of comblike copolymer film composed of acrylic acid-polyethylene glycol monomethyl ether acrylate copolymer(AA-PEGMA copolymer) was successfully synthesized to immobilize hemoglobin(Hb). FTIR, UV-Vis and CD spectra suggest that Hb kept its original structure in the AA-PEGMA copolymer film without denaturation. A pair of well-defined, quasi-reversible cyclic voltammetric peaks at around –270 mV vs. saturated calomel electrode(SCE) for the Hb Fe(Ⅲ)/Fe(Ⅱ) redox couple was observed on the film-modified electrode in phosphate buffer solution(PBS, pH=7.0). The formal potential of Hb/AA-PEGMA copolymer film-modified electrode is linearly dependent on solution pH with a slope of –46.3 mV/pH, illustrating that one-proton transfer was accompanied with each electron transfer. Furthermore, the modified electrode displayed electrocatalytic response to the reduction of H₂O₂ with a linear range of 3.5―126 μmol/L and a detection limit of 1.17 μmol/L. In conclusion, the AA-PEGMA copolymer film was proved to be an excellent matrix for the immobilization and electrochemistry of proteins.     

三维纳米枝状物表面制备蛋白质印迹聚合物及其性能

在金电极表面制备了3D金/铜纳米枝状物,并以丙烯酰胺为功能单体,N,N-亚甲基双丙烯酰胺为交联剂,血红蛋白为模板分子,在枝状物表面成功制备了蛋白质印迹聚合物。利用循环伏安法和扫描电子显微镜对制备的聚合物修饰电极进行了表征,通过微分脉冲伏安法、利用制备的聚合物修饰电极可对溶液中的血红蛋白进行检测,得到比已报道的类似印迹传感器更宽的检测范围和更低的检测下限,其线性范围为1.0×10~(-14)~1.0×10~(-1)mg/L,检测限为1.9×10~(-15)mg/L(S/N=3),相关系数为0.9975。实验结果表明,在电极表面制备的金/铜纳米枝状物,大大提高了电极的电子传递能力,也提高了印迹聚合物修饰电极的检测范围。     

木犀草素在离子液体修饰电极上的电催化氧化及其测定

用1-丁基-3-甲基咪唑六氟磷酸盐([BMIM]PF₆)疏水性离子液体修饰玻碳电极,在0.2 mol/L磷酸盐缓冲溶液(pH为4.0～8.0)中,运用循环伏安法（CV）和差示脉冲溶出伏安法(DPSV)研究了木犀草素在修饰电极上的电化学行为,建立了测定木犀草素含量的新方法。 实验结果表明,该修饰电极上木犀草素氧化、还原峰电位均负移,峰电流增大。 在-0.2～0.7 V电位区间,pH=7.0的磷酸盐缓冲溶液体系中,木犀草素在修饰电极表面发生的是受吸附控制的准可逆等电子等质子电极反应,电子转移系数α=0.5,吸附量为4.6×10-10 mol/cm²;木犀草素氧化峰电流与其浓度在1.0×10^-10～1.6×10^-8 mol/L范围内呈良好的线性关系,检出限达到3.2×10^-11 mol/L,回收率为98.7%～102.0%;该法操作简单、快速、灵敏、准确;可用于野菊花中类黄酮的测定。     

苯甲酰二茂铁修饰碳纳米管糊电极电催化测量蛋氨酸浓度(英文)

A benzoylferrocene modified multi‐wall carbon nanotube paste electrode for the measurement of methionine (MET) concentration is described. MET electrochemical response characteristics of the modified electrode in a phosphate buffer solution of pH 7.0 were investigated by cyclic voltammetry, square wave voltammetry, and chronoamperometry. Under optimized conditions, the square wave voltammetric peak current of MET increased linearly with MET concentration in the range of 1.0×107 to 2.0×104 mol/L. The detection limit was 58.0 nmol/L MET. The diffusion coefficient (D=5.62×106cm2/s) and electron transfer coefficient (α=0.4) for MET oxidation were also determined. The sensor was successfully applied for the measurement of MET concentration in human urine.     

Fabrication and Electrochemical Behavior of Hemoglobin Modified Carbon Ionic Liquid Electrode

A new hemoglobin (Hb) and room temperature ionic liquid modified carbon paste electrode was constructed by mixing Hb with 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) and graphite powder together. The Hb modified carbon ionic liquid electrode (Hb‐CILE) was further characterized by FT‐IR spectra, scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Hb in the carbon ionic liquid electrode remained its natural structure and showed good direct electrochemical behaviors. A pair of well‐defined quasireversible redox peaks appeared with the apparent standard potential (E′) as ?0.334 (vs. SCE) in pH 7.0 phosphate buffer solution (PBS). The electrochemical parameters such as the electron transfer number (n), the electron transfer coefficient (α) and the heterogeneous electron transfer kinetic constant (k_s) of the electrode reaction were calculated with the results as 1.2, 0.465 and 0.434 s^?1, respectively. The fabricated Hb‐CILE exhibited excellent electrocatalytic activity to the reduction of H₂O₂. The calibration range for H₂O₂ quantitation was between 8.0×10^?6 mol/L and 2.8×10^?4 mol/L with the linear regression equation as I_ss (μA)=0.12 C (μmol/L)+0.73 (n=18, γ=0.997) and the detection limit as 1.0×10^?6 mol/L (3σ). The apparent Michaelis–Menten constant (K_M^app) of Hb in the modified electrode was estimated to be 1.103 mmol/L. The surface of this electrochemical sensor can be renewed by a simple polishing step and showed good reproducibility.     

Electrochemical Study and Application on Shikonin at Poly(diallyldimethylammonium chloride) Functionalized Graphene Sheets Modified Glass Carbon Electrode

The electrochemical behaviors of shikonin at a poly(diallyldimethylammonium chloride) functionalized graphene sheets modified glass carbon electrode(PDDA-GS/GCE) have been investigated. Shikonin could exhibit a pair of well-defined redox peaks at the PDDA-GS/GCE located at 0.681 V(E_pa) and 0.662 V(E_pc)[vs. saturated calomel electrode(SCE)] in 0.1 mol/L phosphate buffer solution(pH=2.0) with a peak-to-peak separation of about 20 mV, revealing a fast electron-transfer process. Moreover, the current response was remarkably increased at PDDA-GS/GCE compared with that at the bare GCE. The electrochemical behaviors of shikonin at the modified electrode were investigated. And the results indicate that the reaction involves the transfer of two electrons, accompanied by two protons and the electrochemical process is a diffusional-controlled electrode process. The electrochemical parameters of shikonin at the modified electrode, the electron-transfer coefficient(α), the electron-transfer number(n) and the electrode reaction rate constant(k_s) were calculated to be as 0.53, 2.18 and 3.6 s^-1, respectively. Under the optimal conditions, the peak current of differential pulse voltammetry(DPV) increased linearly with the shikonin concentration in a range from 9.472×10^-8 mol/L to 3.789×10^-6 mol/L with a detection limit of 3.157×10^-8 mol/L. The linear regression equation was I_p=0.7366c+0.7855(R=0.9978; I_p: 10^-7 A, c: 10^-8 mol/L). In addition, the modified glass carbon electrode also exhibited good stability, selectivity and acceptable reproducibility that could be used for the sensitive, simple and rapid determination of shikonin in real samples. Therefore, the present work offers a new way to broaden the analytical application of graphene in pharmaceutical analysis.     

血红蛋白在壳聚糖修饰碳纳米管上的电化学特性及对过氧化氢的电催化分析

用壳聚糖对多壁碳纳米管进行修饰,构建了一种用于固定血红蛋白的新型复合材料,并研究了血红蛋白在该碳纳米管上的电化学性质及其对过氧化氢的电催化活性.扫描电镜结果表明,壳聚糖修饰的多壁碳纳米管呈单一的纳米管状,并能均匀分散在玻碳电极表面.紫外光谱分析表明血红蛋白在该复合膜内能很好地保持其原有的二级结构.将该材料固定在玻碳电极上后,血红蛋白能成功地实现其直接电化学.根据峰电位差随着扫描的变化,计算得到血红蛋白在壳聚糖修饰的碳纳米管膜上的电荷转移系数为0.57,表观电子转移速率常数为7.02 s-1.同时,该电极对过氧化氢显示出良好的催化性能,电流响应信号与H2O2浓度在1.0×10-6 ～1.5×10-3 mol/L间呈线性关系,检出限为5.0×10-7 mol/L.修饰电极显示了良好的稳定性.     

Electrochemical Determination of Reduced Glutathione at Multiwalled Carbon Nanotubes/Poly(bromocresol green)Modified Glassy Carbon Electrode

A multiwalled carbon nanotubes/poly(bromocresol green) modfied glassy carbon electrode (MWNTs-PBG/GCE) was used to investigate the electrochemical behavior of reduced glutathione(GSH). GSH showed an irreversible oxidation process on MWNTs-PBG/GCE with an oxidation peak at 0.77 V(vs. SCE) in a phosphate buffer solution(pH=4.0). The kinetic parameters of the electrochemical behavior of GSH on MWNTs-PBG/GCE were calculated. Under the optimal conditions and with the help of amperometric method, a linear relationship was obtained between the oxidation peak current and GSH concentration in the range from 2×10–7 mol/L to 5×10–6 mol/L with the detection limit as 1×10–8 mol/L(signal-to-noise ratio of 3). The current reached the steady-state current within about 5 s. The modified electrode surface had very good reproducibility and stability.     

硫堇衍生化自组装膜修饰金电极的电化学性质及其对抗坏血酸的电催化氧化

将硫堇共价键合到自组装在金电极表面的半胱胺单分子层上,制成了衍生化自组装单分子膜修饰电极,并用电化学方法研究了它的电化学性质.循环伏安图显示其在pH＝7.7的磷酸盐缓冲液中,于－0.45～＋0.50V(vs.SCE)范围内有2对氧化还原峰.峰电位分别为E_pa¹＝214mV。E_pc¹＝82mV,E_pa2＝－75mV,E_pc2＝－160mV(vs.SCE).pH在5.0～9.0范围内,峰1有2个质子参与反应,峰2有1个质子参与反应.它的表面电子转移速率常数k_s＝0.02S^－1.此膜对抗坏血酸的氧化有催化作用,其氧化过电位较在裸金电极上降低了约250mV.催化电流与抗坏血酸的浓度在1.0×10^-6～4.0×10^-3mol/L范围内呈良好的线性关系.抗坏血酸催化氧化的异相速率常数为2.68×10^-3cm/s.     

聚对氨基苯磺酸/石墨烯修饰玻碳电极伏安法测定痕量汞

制备了对氨基苯磺酸/石墨烯复合膜修饰电极,研究了汞在修饰电极上的电化学行为。 在0.1 mol/L、pH=4.0的磷酸盐缓冲液中,以此修饰电极为工作电极,在-1.2 V搅拌富集5 min,用差分脉冲伏安法测定0.31 V处的溶出峰电流。 结果表明,该电极显著提高了汞离子的电化学响应信号。 在优化条件下,峰电流与Hg2+的浓度在1.0×10-6~5.0×10-4 mol/L范围内呈良好的线性关系,相关系数为0.995。 方法的检出限为5.0×10-7 mol/L。 将该法用于水样中痕量汞的测定,回收率为92.2%~105.2%。     

Immobilization and Bioelectrochemistry of Hemoglobin Based on Carrageenan and Room Temperature Ionic Liquid Composite Film

A novel biopolymer/room‐temperature ionic liquid composite film based on carrageenan, room temperature ionic liquid (IL) [1‐butyl‐3‐methylimidazolium tetra?uoroborate ([BMIM]BF₄)] was explored for immobilization of hemoglobin (Hb) and construction of biosensor. Direct electrochemistry and electrocatalytic behaviors of Hb entrapped in the IL‐carrageenan composite ?lm on the surface of glassy carbon electrode (GCE) were investigated. UV‐vis spectroscopy demonstrated that Hb in the IL‐carrageenan composite ?lm could retain its native secondary structure. A pair of well‐de?ned redox peaks of Hb was obtained at the Hb‐IL‐carrageenan composite ?lm modi?ed electrode through direct electron transfer between the protein and the underlying electrode. The heterogeneous electron transfer rate constant (k_s) was 2.02 s^?1, indicating great facilitation of the electron transfer between Hb and IL‐carrageenan composite film modi?ed electrode. The modi?ed electrode showed excellent electrocatalytic activity toward reduction of hydrogen peroxide with a linear range of 5.0×10^?6 to 1.5×10^?4 mol/L and the detection limit was 2.12×10^?7 mol/L (S/N=3). The apparent Michaelis‐Menten constant K_M^app for hydrogen peroxide was estimated to be 0.02 mmol/L, indicating that the biosensor possessed high af?nity to hydrogen peroxide. In addition, the proposed biosensor showed good reproducibility and stability.     

Direct electrochemistry of hemoglobin on graphene/Fe3O4 nanocomposite-modified glass carbon electrode and its sensitive detection for hydrogen peroxide

Graphene/Fe₃O₄ nanocomposite was prepared for the immobilization of hemoglobin (Hb) to improve the electron transfer between Hb and glass carbon electrode (GCE). The characterization of nanocomposites was described by transmission electron microscopy, Fourier transform infrared, Raman spectroscopy, and X-ray photoelectron spectroscopy, respectively. The electrochemistry of Hb on the graphene/Fe₃O₄-based GCE was investigated by cyclic voltammetry and amperometric measurement. The modified electrode showed a wide linear range from 0.25 μmol/L to 1.7 mmol/L with a correlation coefficient of 0.9967. The detection limit of the H₂O₂ biosensor was estimated at 6.0?×?10^?6?mol/L at a signal-to-noise ratio of 3.     

阿魏酸聚合修饰玻碳电极的制备及其对NADH的催化氧化

研究了阿魏酸修饰电极的制备、性质及对NADH的电催化作用.该电极在0.1mol/L磷酸缓冲溶液(pH=6.60)中,于-0.1～+0.50V(vs.Ag/AgCl)电位范围内呈现一对氧化还原峰,其式量电位E₀为+0.188V(vs.Ag/AgCl),且E₀随pH增加而负向移动.电子转移系数为0.496,表观电极反应速率常数(ks)为6.6s^-1.电极反应的电子数为1且有1个质子参与.该修饰电极对NADH氧化具有很好的催化作用.在NADH存在下,电极过程由扩散控制,扩散系数为1.76×10^-6cm²/s.NADH浓度在0.01～5.0mmol/L范围内与峰电流呈现良好的线性关系.通过计时安培法测得催化速率常数为6.82×10³mol^-1·L·s^-1.     

白藜芦醇在银电极上的吸附伏安行为及其应用

白藜芦醇(3,5,4-三羟基芪)通常存在于葡萄、桑椹等多种植物中, 葡萄酒中也有一定的含量[1]. 由于白藜芦醇对防治癌症、动脉硬化和冠心病等疾病有较好的疗效[1,2], 近年来对白藜芦醇生物活性的研究日益受到重视. 白藜芦醇的测定一般采用高效液相色谱和毛细管电泳等方法[3～5], 这些方法均需对样品进行减压浓缩和萃取等处理, 比较繁琐. 本文对白藜芦醇在银电极上的吸附伏安行为进行了研究, 并将其应用于葡萄酒中白藜芦醇含量的直接测定, 获得了较好的实验结果.     

Application of NiMoO4 Nanorods for the Direct Electrochemistry and Electrocatalysis of Hemoglobin with Carbon Ionic Liquid Electrode

In this paper NiMoO₄ nanorods were synthesized and used to accelerate the direct electron transfer of hemoglobin (Hb). By using an ionic liquid (IL) 1‐butylpyridinium hexafluorophosphate (BPPF₆) modified carbon paste electrode (CILE) as the basic electrode, NiMoO₄ nanorods and Hb composite biomaterial was further cast on the surface of CILE and fixed by chitosan (CTS) to establish a modified electrode denoted as CTS/NiMoO₄‐Hb/CILE. UV‐vis and FT‐IR spectroscopic results showed that Hb in the film retained its native structures without any conformational changes. Electrochemical behaviors of Hb entrapped in the film were carefully investigated by cyclic voltammetry with a pair of well‐defined and quasi‐reversible redox voltammetric peaks appearing in phosphate buffer solution (PBS, pH 3.0), which was attributed to the direct electrochemistry of the electroactive center of Hb heme Fe(III)/Fe(II). The results were ascribed to the specific characteristic of NiMoO₄ nanorods, which accelerated the direct electron transfer rate of Hb with the underlying CILE. The electrochemical parameters of Hb in the composite film were further carefully calculated with the results of the electron transfer number (n) as 1.08, the charge transfer coefficient (α) as 0.39 and the electron‐transfer rate constant (k_s) as 0.82 s^?1. The Hb modified electrode showed good electrocatalytic ability toward the reduction of trichloroacetic acid (TCA) in the concentration range from 0.2 to 26.0 mmol/L with a detection limit of 0.072 mmol/L (3σ), and H₂O₂ in the concentration range from 0.1 to 426.0 µmol/L with a detection limit of 3.16×10^?8 mol/L (3σ).     

Electrochemical Behavior of Mitoxantrone and Its Determination at a Pt／C Implanted Modified Microelectrode

In a 0.02 mol/L Na2HPO4-KH2PO4(PBS) buffer solution(pH=6.82), the electrochemical behavior of mitoxantrone was studied by linear-sweep voltammetry and cyclic voltammetry at a Pt/C ion implantation modified microelectrode. A sensitive reduction peak was observed. The peak potential was -0.72 V(vs.SCE), the peak current was proportional to the concentration of mitoxantrone within the ranges of 7.0×10-8-9.0×10-7 mol/L and 1.0×10-6-2.4×10-5 mol/L, with a detection limit of 4.0×10-8 mol/L. The linear correlation coefficients were 0.9994 and 0.9992, respectively. This method has been applied to the direct determination of mitoxantrone in simulated urine. The recoveries were in the range from 96.2% to 105.9%. The reduction process was a quasi-reversible one with adsorptive characteristics at the Pt/C microelectrode. The electrode reaction rate constant ks and the electron transfer coefficient α of the system were determined to be 4.5 and 0.65 s-1, respectively. The experiments showed that Pt element had surely been implanted into the surface of the carbon fiber, and the atomic Pt improved the electrocatalytic activity. The Pt/C microelectrode had a good stability and reproducibility.     

Studies on direct electron transfer and biocatalytic properties of hemoglobin in polyacrylonitrile matrix

The direct electrochemistry of hemoglobin (Hb) immobilized in polyacrylonitrile (PAN) modified glassy carbon electrode was described. The protein-PAN film exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks for Hb Fe(III)/Fe(II) redox couple in a pH 7.0 phosphate buffer. The formal potential of Hb heme Fe(III)/Fe(II) couple varied linearly with the increase of pH in the range of 5.0-9.0 with a slope of 54 mV pH(-1), which implied that a proton transfer was accompanied with each electron transfer in the electrochemical reaction. Position of Soret absorption band of Hb-PAN film suggested that the Hb kept its secondary structure similar to its native state in the PAN matrix. The Hb in PAN matrix acted as a biologic catalyst to catalyze the reduction of hydrogen peroxide. The electrocatalytic response showed a linear dependence on the H(2)O(2) concentration ranging from 8.3 x 10(-6) to 5 x 10(-4) mol L(-1) with a detection limit of 8.3 x 10(-6) mol L(-1) at 3 sigma. The apparent Michaelis-Menten constant K(M)(app) for H(2)O(2) sensor was estimated to be 0.9 mmol L(-1).     

A novel amperometric hydrogen peroxide biosensor based on electrospun Hb-collagen composite

In this paper, the hemoglobin (Hb)-collagen microbelt modified electrode with three-dimensional configuration was fabricated via the electrospinning method. Direct electron transfer of the Hb immobilized into the electrospun collagen microbelts was greatly facilitated. The apparent heterogeneous electron transfer rate constant (k(s)) was calculated to be 270.6s?1. The electrospun Hb-collagen microbelt modified electrode showed an excellent bioelectrocatalytic activity toward the reduction of H?O?. The amperometric response of the biosensor varied linearly with the H?O? concentration ranging from 5 × 10??molL?1 to 30×10??molL?1, with a detection limit of 0.37 × 10??molL?1 (signal-to-noise ratio of 3). The apparent Michaelis-Menten constant (K(m)(app)) was 77.7 μmolL?1. The established biosensor exhibited fast amperometric response, high sensitivity, good reproducibility and stability.     

基于SiO2纳米粒子固定辣根过氧化物酶的生物传感器

制备了尺寸均一的SiO2纳米粒子(60nm),并将其用于固定辣根过氧化物酶.以儿茶酚为电子媒介体制得的H2O2传感器的检测范围为1.7×10-7～1.9×10-5mol/L,检出限为8.3×10-8mol/L.达到95%稳态电流所用时间少于10s.该传感器的米氏常数为7.8μmol/L,表明所固定的酶具有较高的生物活性.     

石墨烯/铂纳米粒子杂化膜测定肾上腺素

利用循环伏安法制备了石墨烯/铂纳米粒子杂化膜修饰电极,并利用该修饰电极研究了肾上腺素（EP）的电化学行为,建立了测定肾上腺素的电化学方法。 分别利用扫描电子显微镜（SEM）和循环伏安法对电极表面的形貌和电化学性能进行了表征。 试验优化了修饰电极制备过程中影响电极性能的条件和EP的测定条件。 试验结果表明,石墨烯/铂纳米粒子修饰电极对肾上腺素有明显的电催化作用。 在pH=5.0的柠檬酸 磷酸氢二钠缓冲溶液中,EP的氧化峰电流与其浓度在4.4×10-8~2.2×10-6 mol/L的范围内呈良好的线性关系。 线性方程为ipa(10 μA)=0.0753c(mol/L)+3.7653×10-5,r=0.9989,检出限为2.2×10-9 mol/L（S/N=3）。 修饰电极表具有良好的重现性,可用于实际样品的测定。