1,3,4,6—四硫代戊搭烯—2,5—二酮制备含硫取代基的四硫富瓦…

以１，３，４，６－四硫代戊搭烯－２，５－二酮为原料，经偶联，醇解，烃化或醇解，烃化，偶联等步骤，制得四甲硫基四硫富瓦烯，四乙硫基四硫富瓦烃，二喹喔啉硫醚，４－甲硫基－５－甲氧甲酰硫基－１，３－二硫环戊烯－２－酮。四甲基乙烯和４，４＇－二甲硫基－５，５＇－二甲氧甲酰硫基四硫富瓦烯及它的异构体混合物，提出了１，３，４，６－四硫代戊搭烯－２，５－二酮醇解机理。讨论了未得到某些预期产物的原因，报道了３种四     

1，3，4，6－四硫代戊搭烯－2，5－二酮制备含硫取代基的四硫富瓦烯的研究

以１，３，４，６－四硫代戊搭烯－２，５－二酮为原料，经偶联、醇解、烃化或醇解、烃化、偶联等步骤，制得四甲硫基四硫富瓦烯、四乙硫基四硫富瓦烃、二喹喔啉硫醚、４－甲硫基－５－甲氧甲酰硫基－１，３－二硫环戊烯－２－酮、四甲硫基乙烯和４，４＇－二甲硫基－５，５＇－二甲氧甲酰硫基四硫富瓦烯及它的异构体混合物．提出了１，３，４，６－四硫代戊搭烯－２，５－二酮醇解机理．讨论了未得到某些预期产物的原因．报道了３种四硫富瓦烯衍生物的循环伏安图及电化学性质．     

二硫架桥的二聚四硫富瓦烯合成新方法及其电化学性质研究

以2-(2′-氰乙硫基)-3,6,7-三甲硫基四硫富瓦烯为原料,在四甲基氢氧化铵作用下,通过Mn2+离子催化偶联反应合成了1个二硫架桥的二聚四硫富瓦稀化合物1,化合物1的结构经红外光谱、扫描电子显微镜、元素分析、核磁共振氢谱、质谱进行了表征.循环伏安结果显示化合物具有2对明显的可逆氧化还原峰.为"桥式"四硫富瓦稀衍生物的合成提出了一种新方法.     

烷硫基甲硫富瓦烯的合成及其性质的研究

分别以1,3,4,6－四硫代戊搭烯－2,5－二酮和4,5－二（2′-氰基乙硫基）－1,3－二硫杂环戊烯－2－酮为原料,经偶联、醇解、烃化制得四甲硫基甲硫富瓦烯和四乙硫基四硫富瓦烯。对两种方法制得产物的产率存在较大差别提出了合理的解释,并讨论了2种四硫富瓦烯衍生物的循环伏安图及有关电化学性质。     

不对称四硫富瓦烯衍生物合成新方法及其电化学性质的研究

以2,3－二（2′－氰乙硫基）－6,7－亚烷硫基四硫富瓦烯为原料,在醇钠的作用下消去氰乙基生成的二元硫负离子与对－二（氯甲基）苯反应除了生成两种新的不对称四硫富瓦烯衍生物外,还得到两种新的“二桥”－双四硫富瓦烯衍生物,为四硫富瓦烯衍生物的合成提供了一种新的方法。并对不对称四硫富瓦烯衍生物和“二桥”－双四硫富瓦烯衍生物的循环伏安图、电化学性质和UV－Vis光谱进行了研究。     

烷硫基四硫富瓦烯的合成及其性质的研究

分别以 1 ,3,4 ,6-四硫代戊搭烯 -2 ,5-二酮和 4 ,5-二 ( 2′-氰基乙硫基 ) -1 ,3-二硫杂环戊烯 -2 -酮为原料 ,经偶联、醇解、烃化制得四甲硫基四硫富瓦烯和四乙硫基四硫富瓦烯。对两种方法制得产物的产率存在较大差别提出了合理的解释 ,并讨论了 2种四硫富瓦烯衍生物的循环伏安图及有关电化学性质。     

双（亚烷二硫基)四硫富瓦烯衍生物的合成及其电化学性质

以四(氰乙硫基)四硫富瓦烯为原料经醇钠消去氰乙基生成四硫富瓦烯四硫盐， 再与二元卤代烷烃化反应，除了得到三种文献报道的双(亚烷二硫基)四硫富瓦烯衍 生物外，还得到三种新的“四桥”双—四硫富瓦烯衍生物，为“桥式”双—四硫富 瓦烯衍生物的合成提出了一种新的方法．并研究了它们的循环伏安图、电化学性质 和紫外—可见光光谱．     

四(苯甲酰甲硫基)四硫富瓦烯的合成及其有关电化学性质的研究

本文通过4, 5-二(苯甲酰甲硫基)-1, 3-二硫杂环戊烯-2-硫酮与乙二醇反应生成其缩酮, 然后在亚磷酸三甲酯作用下偶联,最后水解, 首次成功地制得了四(苯甲酰甲硫基)四硫富瓦烯(TBMT-TTF)。用循环伏安法和UV-Vis光谱研究了有关电化学性质。为制备含羰基四硫富瓦烯提供了一条可行途径。     

四硫富瓦烯和蒽单元构建的新型多功能四硫富瓦烯环蕃的合成与性质

2,6-二(甲硫基)-3,7-二(2-氰乙基硫基)四硫富瓦烯在甲醇钠的作用下消除保护基团, 生成四硫富瓦烯双钠盐, 再与9,10-二(氯甲基)蒽反应生成由四硫富瓦烯(TTF)和蒽单元构建的新型TTF环蕃. 分别通过循环伏安法和化学氧化法对其电化学性质、紫外吸收光谱和荧光性质进行了研究, 实验结果表明此类TTF环蕃化合物对OH^－离子有识别功能. 并通过电化学和紫外吸收光谱研究了这种新型四硫富瓦烯环蕃在金纳米颗粒表面自组装行为.     

新型1,3-二硫杂环戊烯-2-硫酮衍生物的合成

通过4,5－二硫基－1,3－二硫杂环戊烯－2－硫酮（dimt）的锌配合物和相应的卤化物反应,成功地合成了3种未见报道的1,3－二硫杂环戊烯－2－硫酮衍生物。讨论了制备这些化合物的反应条件。用IR、^1HNMR和MS对这些化物进行了表征。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.